Inspire T6100 Speakers not found by the computer

Hi all, I have the X-Fi Sound Blaster Extreme Audio sound card. I then connected the speakers to the computer correctly as per the green/black/orange connections. The blue light is on, on the centre speaker representing power. However in the sound/speaker options my speakers are not shown. I fI am to conenct the audio cable from the monitor to the sound card then the speakers in the monitor work so it must be a speaker problem. Any Ideas? Thanks

The first step would be confirming the printer actually got fully connected without any issue by running a wireless test page. This should be under setup on the front panel of your printer, then wireless, then wireless test report. If this is all a pass you should be connected, but will also want to try loading the EWS of the printer to ensure the mac/ipad see it.
Under the same wireless menu you should see the IP address, or an option for view network summary that will show that address. Put that address in top the address bar of safari as if it was a website, but without WWW. If it loads that page you have communication, just not the communication you need for printing on apple devices.
If that loaded and you cannot see the printer to print, chances are something called multicasting is disabled. Apple devices use bonjour to communicate, which is a multicasting protocol. Generally this will have to be enabled without your routers settings so you may have to check the manual for the device, or contact the router manufacturer.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Similar Messages

  • My aio dell 926 is not found since the computer update

    My computer says I can only print from an app and that my printer driver cannot be found.  It was working fine before Windows 8 updated....help

    This is an HP forum, for questions about Dell printers I suggest you visit the Dell suppport site: Product Support | Dell US - Dell Official Site - The Power ...
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • E71 not found by the computer

    Hi,
    I buy a E71 in december at french orange operator.
    I installed the last nokia PC suite but when they ask to connect the phone, my system says that it is an unknow device, no usb driver found. I try to install on a other computer, same problem. I try with a new usb cable, same problem.
    the software code was 214503, I have the firmware 300.21.012 nokia 071-1
    any idea? 

    I'm trying to post alternate html but instead of showing you the html it just posts my name in red. 

    I'll keep trying...
    Carolyn
    Message was edited by: Carolyn Samit

  • Photoshop CC show updated, but not found in the computer

    Creative cloud shows that photoshop CC is up to date, but i can't find it in my computer, so i can't uninstall it as well.
    What should I do now?

    Hi Vivien12,
    Please refer to the below article.
    http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
    Thanks

  • I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. Any thoughts?

    I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
    Any thoughts?

    Found this fix here which worked for me with a similar problem.
    https://discussions.apple.com/thread/3196594?start=0&tstart=0
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well.

  • A while ago i went to sync music onto my Ipod Touch. Not only did the computer erase my music i had no idea how to get it back :( I contacted Apple on the phone but the name was american and i found it really hard to understand him. How do i get it back!

    A while ago i went to sync music onto my Ipod Touch. Not only did the computer erase my music i had no idea how to get it back I contacted Apple on the phone but the name was american and i found it really hard to understand him. How do i get it back! i bought most of my music on itunes but i just dont have any idea where to go and whjat to do can any help me??
    Respond please!

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then see if you can redownload your past music purchases (those that are still in the store) via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you are not in a country where music can currently be re-downloaded, then have you not got it on your computer and/or on a backup ? If not then you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • HT204406 I opened i Tunes on my mac and while i see the songs in some of my playlists they will not play. The computer says the song could not be used because the original file could not be found. Would you like to locate it? When i do it won't play.

    I opened i Tunes on my mac and while i see the songs in some of my playlists they will not play. The computer says the song could not be used because the original file could not be found. Would you like to locate it? When i do it won't play.

    You will need to locate where you itunes library is and then relink one of the songs, itunes will do the rest. So if your itunes library is on an external hard drive or something like that. When you get the error message click yes you would like to locate it. then navigate to the external hard drive where the itunes libray is and locate that particular song. Once you have linked one, itunes will ask if you would like it to locate the rest, click yes and it will find the rest of the files if they are in the same location.

  • Pages is not working in my computer anymore.  Templates aren't there and I tried redownloading the application, but it says An eligible Pages application was not found in the location /Applications.

    "An eligible Pages application was not found in the location /Applications."  every time i try to update.  what do i do?

    lukasfromnull wrote:
    You will need to buy the newest iWork so it works again. I had the same problem.
    No, there is no need to re-purchase iWork. If it was installed from a retail boxed DVD, it needs to be reinstalled from the DVD. If a license was purchased electronically for the iWork '09 trial, reinstalling from the downloaded dmg will need to be done. If any of the apps were purchased from the Mac App Store, they can be reinstalled from the Mac App Store.

  • CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive!

    CD/DVD Drive only reads DVDS Not CD But the computer reads it as a DVD RW Drive.the drive door say RW DVD+R DL,Compact Disk Rewritable,Ultraspeed,DVD Multi Recorder.I was Wondering if Windows Loaded the wrong Driver?My Laptop S/N IsCNF62612TZ And P/N Is EZ601UA#ABA And The Front Of My Monitor says Hp Pavilion Dv 1000 Entertainment Notebook PC,And The Service Tag Is dv1738od and the Sticker On The Back Of The monitor say Hp Pavilion dv5- 1235dx Entertainment notebook PC.it Cme Factory With Win xp and when i got it the os was corrupted.i tried to reinstall xp but disk said no hard found.so i booted it up with vista ultimate and then downloaded the drivers and stuff from the here.should i had downloaded the 64 bit set as well?

    della wrote:
    My toshiba tecra a2 can only read DVDs. I cant read any type of cd. Ive tried so many things. My laptop is running on xp service pack 3 with a mat**bleep**a DVD RAm UJ 820s. I can burn/run any type of DVD but cant do anything with cds. Ive tried unistalling the drive and that didnt work. Ive uninstalled the IDE drivers and that didnt work. Nothing seams to work. I cant use recovery cds because there CDS. Please Help!!!!!!!!!
    It's probable that the CD 'side' of the combo drive has failed.  That you cannot boot from the recovery CD is pretty much proof of the failure.  

  • AppleSyncNotifier.ex-Entry Point Not Found message, "the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.

    After an update, every time I start my computer (that uses 64-bit Windows 7), there is an AppleSyncNotifier.ex-Entry Point Not Found message, "the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll. I have checked and tried suggestions to resolve this from this site and several other places with no success. Appreciate advice how fix and resolve this

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • REP-1070 Object not found in the object store ...

    When trying to open an report file (.rdf) in Reports 6 it won't open. I get the error REP-1070 Error while saving or opening ... Object not found in the object store.
    I know that in the report there is an OLE object, is that the problem? How can I save the source code when I can't open the file?
    Please help!
    /Linda

    Hi vdha,
    Try this..
    Get the user account under which the host instance for the send port is configured.
    Log-off from your server. Log back in using the service account. The account which is been used in the host instance.
    Go to MMC..Select “My User Account” as opposed to “Computer account” as you did.
    The import the certificate under “Personal “ folder and “Trusted Root Certification Authorities ”
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • An eligible iPhoto application was not found in the location /Applications.

    Hi,
    I have a Mac OS X version 10.5.6. Recently my computer encountered a serious hardware problem and everything had to be reinstalled. Thankfully, I was able to salvage all of my files. When I reopened iPhoto however, it appeared as iPhoto v6.0.6. Previously I am very sure I had version 7 or later. Now when I want to upgrade my iPhoto a screen appears with that message
    "An eligible iPhoto application was not found in the location /Applications."
    I've been to nearly every forum to try and solve my problem but it still doesn't work. I'd appreciate any help I can get and apologize if communication-wise, my computing knowledge/terms are slightly limited.
    Thanks.

    If you had iPhoto 7 then you should have the disks that it came on. Download and run Pacifist on the disks that came with your computer to see what version of iPhoto is available. If it's V6 the you're getting the message because the database is damaged.
    If that's the case about the only recourse I can think of is to try the following:
    Creating a new library while preserving the Events from the original library.
    Move the existing library folder to the desktop.
    Open the library package like this.
    Launch iPhoto and, when asked, select the option to create a new library.
    Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
    This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
    The original library will still be available for further attempts at recovery.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • This procedure name is not found in the database: wwv_flow.show

    I created an interactive report, which works fine in the APEX developer, using the Application Express Authentication scheme.
    To add it to our Self-Service web system, I change the authentication scheme to a custom scheme that has been working fine for other applications, although I don't know of any other interactive reports using this scheme in Self-Service.
    Anyway, the interactive report is displayed in our Self-Service system using the custom authentication scheme, but if I display the Action menu and click on one of the options (Filter, Sort, Compute...), a pop-up window is displayed saying:
    This procedure name is not found in the database:
    wwv_flow.show
    That error is also displayed when I try to edit the displayed filters.
    Does anyone know why I might be getting that error or have suggestions on things to try to track it down?
    Thanks,
    Laura

    Laura,
    To add it to our Self-Service web systemWhat does that mean? What did it entail?
    I'm thinking maybe you embedded some relative links into a menu system in which the base href was not appropriate, ... or something.
    Scott

  • The requested feature DSC-Service is not found on the target machine.

    Hi,
    I'm trying to create a DSC Pull Server with a 2008 R2 SP1 Virtual Machine,
    While many of the forums and tutorials have helped, particularly https ://www .google.com/url?url=https://davewyatt.wordpress.com/2014/06/07/how-to-install-a-dsc-pull-server-on-windows-2008-r2/&rct=j&frm=1&q=&esrc=s&sa=U&ei=7BavVKvxMIHEmAWDjoLwBQ&ved=0CBQQFjAA&usg=AFQjCNEUHC8QBHfNgChYXnMQe87rXrHz1g
    after installing all of these modules and moving on to later tutorials I'm experiencing an error every time I try to run a pull server configuration scrpit.
    After running the script found here: http://www .systemcentercentral.com/day-1-intro-to-powershell-dsc-and-configuring-your-first-pull-server
    I then trid to execute that code on the localhost,
    it came up with this error:
    PowerShell provider MSFT_RoleResource failed to execute Test-TargetResource functionality with error
    message: The requested feature DSC-Service is not found on the target machine.
    + CategoryInfo : InvalidOperation: (:) [], CimException
    + FullyQualifiedErrorId : ProviderOperationExecutionFailure
    + PSComputerName : localhost
    Please Help, I cannot find the DSC-Service Module, and while some scripts have allowed and Pull Server to be created, they do not function peroperly because of this error.
    Thanks a lot.
    P.S. due to this being a 2008 R2 SP1 machine When then running the command: Add-WindowsFeature DSC-Server (As has been suggested by a lot of soureces) This error Will Come up:
    Add-WindowsFeature : ArgumentNotValid: Invalid role, role service, or feature: 'DSC-Service'. The name was
    not found.
    At line:1 char:1
    + Add-WindowsFeature
    + ~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidData: (:) [Add-WindowsFeature], Exception
    + FullyQualifiedErrorId : NameDoesNotExist,Microsoft.Windows.ServerManager.Commands.AddWindowsFeatureComm
    and

    Hi Anna,
    I'm in the same situation as Nathys.
    I tried everything you indicated. However, it still does not work. I got the same error:
    PowerShell provider MSFT_RoleResource  failed to execute Test-TargetResource functionality with error message: The requested feature DSC-Service is not found on the
    target machine.
        + CategoryInfo          : InvalidOperation: (:) [], CimException
        + FullyQualifiedErrorId : ProviderOperationExecutionFailure
        + PSComputerName        : devops-01
    The SendConfigurationApply function did not succeed.
        + CategoryInfo          : NotSpecified: (root/Microsoft/...gurationManager:String) [], CimException
        + FullyQualifiedErrorId : MI RESULT 1
        + PSComputerName        : devops-01
    PS C:\Workspace\dsc> dism /online /Enable-Feature /FeatureName:DSC-Service
    Deployment Image Servicing and Management tool
    Version: 6.1.7600.16385
    Image Version: 6.1.7600.16385
    Enabling feature(s)
    [==========================100.0%==========================]
    The operation completed successfully.
    I have restarted the computer, but it still does not work.

  • HT1386 my sync stops due to iphone not found during the final copy step...how do I fix?

    my sync stops with an error message that iphone not founds during the final copy step...how to I fix?  always work before.

    The backup is located at: iTunes/Preferences/Devices. Select the backup from the window and hit the delete key. Then connect your iPhone to your computer. It'll take a new backup.

Maybe you are looking for