Inspire T6200 speakers in stack mode

So i had to move some stuff around and my speakers wont reach the wall nymore so im putting them stacked on top of each other for the first time. i dropped the 5.1 Stack switch on the back of the sub like a boss. I have the creative sound blaster x-fi xtreme gamer edition card and use that volume panel im sure yall are familiar with. Heres where the problem comes up, i dont think that the volume panel is recognizing the speakers as stacked and is still using them like they are surround. I can definatley here different sounds coming from the different speakers when im rolling noobs in game, it doesent sound bad or anything just kinda weird. So wat im asking is if anyone who's doing this or has any knowledge on it to give me some advice on what settings to adjust in the volume panel. Also id really like to know what dropping that 5.1 stack switch actually does and what exactly is coming out of the rear speakers when u stack them. Creative support didnt really answer my question so any help would be greatly apprecieated. Also i use the custom pax x-fi drivers and windows 7 if that makes a difference.

It sounds to me like your SBLi've Value _doesn't_ support 5., and you're trying to use its digital out (only) jack as a center/sub jack. A big clue is the color of the digital jack furthest from the gameport connector. Pre-5. (4-channel) cards have a dedicated digital jack (which is also 4-channel) coded yellow. 5. SBLi've cards have this jack switched according to the "Digital Output Only" setting between analog center/sub and digital front/rear, coded orange.
-Dave
[email protected]

Similar Messages

Connection problem? Inspire T6200 to sound blaster

Dear all..
I connect my Inspire T6200 to my Sound Blaster 5.1 VX .
1) I disbled my on board sound card in BIOS.
2) I installed the sound card to my mainboard and installed the software.
3) I used the software provided by creative to test the speakers.
4) I attached the pins of the speakers to my sound card as followed:-
Green Pin to Green Hole
Black Pin to Black Hole
Orange Pin to Orange Hole
Pink Pin(attached with wired remote) - Not sure where to attach.
**Also left the blue hole of the sound card empty**
5) Front left and Front right speakers are correct,
When tested for Rear left/right and Centre speaker,
all sound came out from the subwoofer.
I desperately seek help from you guys.
What went wrong? What should I do?
Thank you so much.

I'm having the EXACT same problem.

Photoshop CC 2014 - Stack Mode Disabled - Load Image Into Stack Has No "Convert To Smart Object" Option

Hi,
I have just installed Photoshop CC 2014.1 and I have "Stack Mode" command disabled.
Also, I have no option to convert layers into smart object when I run "Load Image Into Stack" command.
Can you please tell me how to enable these features?
Thank you very much.
Luca

The 512 MB are a minimum requirement, not some optional thing. Without it, 3D will never work.
Mylenium

Inspire 5500 - Speakers Cut Out?

Hello... I'm using the excellent Inspire 5500 speakers, but occasionally one of the speakers, usually front center, just cuts out. If you pull the power and plug it back in (a simple off/on doesn't work) it'll come back. But sometimes when I turn the system on, or more speakers won't work and I need to unplug it from the mains and plug it back in. Last night, the front left, center and woofer failed to work when I turned them on. 3 plug cycles later they were all kicking again.
Anyone know why this is happening? It's plugged into a fairly new Sony DVD player via the Digital Coaxial input...

Hi there
The same thing has started happening to me.
When I switch on, the front right speaker does not come on. Only way to get it back on, is unplug the power connector from the back of the decoder and then plug it back in. As you say, a simple switch on/off does nothing.
I've been using this set up with a PC for the best part of two years now and I've changed nothing recently. I've also checked all connections and wires are sound and plugged firmly in.
My guess is that it's something wrong with the amplifier in the sub-woofer. Unless anyone else has any suggestions?

Cracking and popping on Inspire T2900 Speakers

There was a message exactly like this one on the forums about a year ago, perhaps more, and there were no responses...hopefully this proves more fruitful.
Yesterday my Inspire T2900 speakers began to pop and crack. The pops happen at regular intervals of maybe ten seconds or so, and distort sound whenever they occur. Even when there is nothing playing on them, the sound is simply obnoxious. The pops continue even when the speakers are 'off' (aka, the volume on the control is turned all the way down so that it clicks off), though they are quieter. Only when the system is unplugged completely (or the speakers unplugged from the sub unit) do they stop.
I have an audigy 4 sound card purchased this past summer. Even with headphones plugged in, the speakers still crack and pop.
Any help with this problem is greatly appreciated.

Do they still make the cracking if you unplug the leads to the computer at the speaker side? Are all connections (all computer cables, all speaker cables, and the power cable) firmly connected? Finally, it may sound silly and is highly unlikely, but nothing else in the house is being turned on to trigger it.
If none of those help i would assume the problem is with the speakers and your best bet is to contact support.

Stack mode in Photoshop CS4

Hi all,
I'm trying to use the options 'layers - smart objects - stack mode'. However 'stack mode' is greyed out. I've read on a few forum posts that this functionality is only available with CS4 extended.
Can anyone tell me if that's correct. And if so is there an upgrade route to allow me to get the extended version?
Thanks
Darryl

You're welcome. If you choose to get CS6 you won't need to buy Lr again. If you do get Ps CC you will get Lr for free and free upgrades (Lr 5.7 and Ps CC 2014 15.0 currently).
Edit: Creative Suite 6
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Benjamin

Show movement in area from 30m video, smart objects - stack mode - range - 90k frames

Hey,
So I have a real challenge and need help figuring out the logistics of how to get it to work sensibly.
I'm trying to visually show the movement through a space (which will later be generated into a 3d form etc..)
To do this I think the best way would be to use photoshops smart objects - Stack modes - "Range"
A final image to show movement through the area.
Lighter where people walk more often and darker where people walk less often
http://help.adobe.com/en_US/Photosho...44D6937Ca.html
Range basically shows everything that has moved between the layers.
If you import a video frames into layers in photoshop, make them a smart object and apply the range stack mode it shows peoples movement and where they walk.
So thats what I'm going to do unless there is a better way to do this in something like after effects or premiere pro that I don't know about?
- I've done the photoshop way before and it worked very well - but on a very small scale.
I have a 30 minute video recording (considering longer but not sure if its viable), it was shot on a tripod and seems ok but can always do it again differently if needed!
The video was shot at 1920 x 1080 50fps which with 30 minutes (1800 seconds) makes 90,000 frames total for the video.
The problem
I need the info from ALL the frames - any less and the movement is too 'choppy' and isn't very useful.
So how can I make use of 90,000 frames/layers in a smart object for the range stack mode?!
I heard photoshop has a layer limit of 8k.
I have access to 6 high spec brand new mac pros (not 100% sure of the spec).
I'm thinking the solution would be use scripts and break it down into manageable chunks then flatten then merge them together.
Possible Solutions
1. Merging frames from each second or few seconds and then blending - not sure what blend mode I would use and also not sure if it would affect results
2. chop the image down into sections, process each section, flatten and merge together. for example split it into 4 quarters. - Don't think this will help, its more the limits in layers than anything else
3. Find an alternative method to deliver the image such as after effects.
on a side note I know I could have done a long exposure, done many before, but they don't really show movement, they simply blend the frames. The downside of long exposures for this exercise is that things could cancel each other out, for example; a man with a white top on walks past then a man with a black top walks past, these would cancel each other out to some degree.
The Range smart stack mode is brilliant because it directly shows movement and people don't cancel others out.
Help
Where can you help?
So basically if this is the correct way to do this then can anyone help with this and suggest any ways of breaking it down that wouldn't affect the final result?
Someone that knows more of how range stack mode works.
Correct me if I'm wrong with any of this and please let me know if you can help at all
Thanks!
Luke.
Context
For context the final thing has to be something that doesn't change in time, i.e. not a video but an image or model. This image will then be skewed a bit so its a plan view. It will then be used for another script in a 3d package like rhino which will create a number of points in space, the x and y axis being the location in plan view and the Z axis being the value of the pixel. I will then generate a solid form from the points and then smooth it out a lot so I should end up with a 3d wave model directly generated from the movement of people through the site. I will then architecturally design the form into spaces etc... This will form the surface of my final project
Heres an example of the first 500 frames (500 frames limit on video frames to layers import)
The footage isnt the best as I moved the camera slightly and the angle isnt amazing - ideally I want a plan view but will skew the final image to do this.

But I have a concern that if I break it down to 300 images (6 seconds of footage) then stack then flatten the stack until its dont the whole 30 mins then use these flattened ones to create a new stack it would affect results as it will then be working with images like the above.
That should be easy enough to test (if maybe not exactly proof) – for Range it seems to make no difference, for Variance it seems to do.
Also why use 16 bit image mode?
To reduce the accumulated effect of the necessary rounding of pixel values.

Stack Mode Problems

I am running aperture 2.1.2 on the MBP below. When I use stack mode, things will work fine for awhile, images will advance to stack pick, etc. After varying amounts of time, when I advance to the next stack it will refuse to do so. The images stay frozen on the comparison panel, the advance arrows do nothing to change that. The arrows will sometimes advance across the filmstrip at the botton, but the viewed images refuse to change. I have tried clicking everything, escaping, round trip to the browser, and the only thing that seems to happen is that I can go to full-screen with the same images and then back by double clicking them.
The only thing that gets out of this is to restart the program.
Any ideas? Bill

Anybody seen this?

Use stack mode in awesome-git

Hi,
I currently try the awesome3 wm and i wondered how to het stack mode in titlebar and keybind.
and I don't find any interesting and complete documentation about wicked to see all option(still probably on development?)
PS: now i use something like the woldori.config, here a screen
..thank you and forgive me about my worse english
Last edited by BadPotato (2008-08-30 10:04:39)

You're welcome. If you choose to get CS6 you won't need to buy Lr again. If you do get Ps CC you will get Lr for free and free upgrades (Lr 5.7 and Ps CC 2014 15.0 currently).
Edit: Creative Suite 6
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Benjamin

Problem with inspire 280 speakers

well i own creative inspire 280 speakers but im having trouble with them. First when i connect it to some devices background electric noise appears when im not playing anything, then if I connect the jack till the end, the played sound will only be mono, the only way to play it stereo is if i dont put the 3,5mm jack till the end but it still shows some background noise. How can i solve this issue?

i have a similar problem with my 280 speakers.

Smart object stack modes - in english please

How do we make sense of these stacking modes?
I tried the median technique to lose the disparate elements, nothing.
Those others, how do we interpret the definitions for real world use?
Thanks anyone.

I tried but this is what I got:
"There is no Adobe PDF viewer installed to view the selected file."
So far, this is the most definitive item I have found,
hence my questions:

SG500X-58 - Native stacking mode

Hi!
The switch SG500X-48 has 4 SFP+ ( 10G ) ports - XG1, XG2, XG3/S1, XG4/S2 - and two configuration modes - standalone and "native stacking".
Can I use XG1 and XG2 SFP+ ports to connect servers when "Native stacking" mode is active ?
Thanks,
Leonardo.

Hi itobal, yes you may. xg1 and xg2 are not combo port to xg3 and xg4.
-Tom
Please mark answered for helpful posts

Stack mode and rating images-WORKFLOW SUGGESTIONS PLEASE

I have a couple of issues when working in stack mode.
The first is that although I can rate the image that is bordered in white I don't see an easy way to rate the image with the yellow border?
The second thing that gives me fits is how when I am in stack mode the up and down arrow keys skip over unstacked images while editing.
My workflow now is to take two passes through a set of images. The first in stack mode to get the stack picks and alternates set. The second pass which I do in Primary mode is to rate the images. This has the disadvantage of not rating the stacked images which are not the 'pick'.
Anyone got some suggestions from their own workflows?

Sailor,
The problem with the opt + return item is that it kicks you out of 'Stack view' into 'Primary' and if you want to return to 'Stack view' then you have to do 'opt + t' and you have lost your place in the stack. (i.e. in a stack of 7 if you were looking at items 1 and 4 when you return to 'Stack view' you are back to looking at 1 and 2 again)
CONFUSION POINTS: I was using the keyboard shorcut card that came in my v1.0 Aperture box, some of those shortcuts are no longer correct. I have also found that not all of the shortcuts on the current PDF Quick Reference are working as expected.
I recalled that you can use 'opt =' or 'opt -" to increse the rating on the yellow bordered item. This might lead you to expect that opt 1-5 would assign ratings to the yellow border image but those shortcuts assign metadata.
I think a part of my problem is that I have been working with much too large stacks. Stacks work better for me if they are smaller and contain images that are visually equivalent but differ in minor details that need magnification to resolve. See: http://discussions.apple.com/thread.jspa?threadID=831108&tstart=0

Inspire T6200 SPDIF?

Greetings,
At the moment i own a creative X-FI Titanium Pro (PCI-E) with a Inspire 5800. However I am looking at better audio quality.
I myself am thinking about buying a 5.1 set with a SPDIF output. I am currently looking at the Inspire T6200 but I am unsure if this set has a SPDIF.
So my question is, does this set have SPDIF and does it also improve the quality a lot comparing to the normal outputs.
If the 6200 doesn't have SPDIF, which other 50-50 Euro set does?
General purpose of the set is of course gaming, movies and music in 5.1 quality (gaming ATM is OK, but I want better movie quality).
Thanks for the assist!

It's just happened the same to me!!!
Anyone can suggest me the best sound card to add to Inspire T6200 and my notebook?
Thank you!!

Layers Smart Objects Stack Modes (CS3/4 Extended)

Are any of the Stack Modes besides Median and Mean (Noise reduction) good for anything? Have any of you found a use for them?
Thanks!

If you don't recognize the statistical names on them - then they probably won't be of much use to you.
If you are doing statistical work on images, then you should recognize the names and they would be quite useful.

Inspire T6200 speakers in stack mode

Similar Messages

Maybe you are looking for