Inspire T7900 no sound from side...

Hi there, i've just buy an "Audigy2 ZSplatinium", an "Inspire T7900" and a "decoder DDTS-100"
i've try to connect my sound card to my sub without the decoder, i don't have any sound from side speaker, if i switch rear and side speaker, the speaker itself works, but it seems the sounds don't come to the side...
i've try to connect with the decoder, in analogic, and optical, same problem...
when i try to calibrate the audio systeme, i can hear sound from front speaker (all 3), both rear, but when the programs wants to test side one, i got a horrible sound, like "HIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII III" at the place of the usual "left side" or "center".... i've try to finish the calibrate but the programs say my cable aren't connect well, i've RE-check all, it's good.....
i've all deconnected, uninstalled, and RE- install ALL the syteme.... same problem
I'm starting to become crasy.
I don't know if the probl?me comes from my sound card or my audio sytme....
PLS help me....

stiaros,
Not sure if you are able to install the EAX4 driver for your OEM card but you can try installing it - EAX 4.0 ADVANCED HD Driver Update for Creative Sound Blaster Audigy 2/Audigy 2 ZS. After you are done installing that, do a search for this filename CTPANEL.EXE, you should be able to configure the card through this.
JasonMessage Edited by Jason-CL on 05-27-2005 06:08 PM

Similar Messages

FAINT sound from Side Speak

Hi! again, can someone help me configuring X-Fi Fatality & T7900 so that I have proper sound output from all 8 channels. Have Windvd 7. A very faint sound comes out from Side Speakers. When I test speakers, they seem GOOD with proper vol output through all channels. THX console also shows proper output of sound from all speakers. MP3 plays well, but When I play any DVD there is hardly any sound from side speakers. Tried every thing. Guess I am making a mistake in configuring setup. I tried using the below advise but still no go. -----------------------------------------------------------------------------2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.---------------------------------------------------------------------------- - X-Fi Fatality & Inspire T7900WinDVD 7WinXP Pro.?[color="#ff0000"]Please Guide

Hi! again, can someone help me configuring X-Fi Fatality & T7900 so that I have proper sound output from all 8 channels. Have Windvd 7. A very faint sound comes out from Side Speakers. When I test speakers, they seem GOOD with proper vol output through all channels. THX console also shows proper output of sound from all speakers. MP3 plays well, but When I play any DVD there is hardly any sound from side speakers. Tried every thing. Guess I am making a mistake in configuring setup. I tried using the below advise but still no go. -----------------------------------------------------------------------------2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.---------------------------------------------------------------------------- - X-Fi Fatality & Inspire T7900WinDVD 7WinXP Pro.?[color="#ff0000"]Please Guide

DVD Audio- I want sound from sides, not r

Is there any way to reconfigure so that surround sound from dvdaudio comes out of the side speakers instead of the rear when using a 7. setup?

Blakejohann,
I am not aware of any way to do this. The mapping to the channels is discrete and our card doesn't have software that allows remapping channel outs.
Jeremy

Installed NEW Soundblaster Audigy 2 ZS Drivers... No Sound from side left spea

I installed the NEW 2.8.4 Drivers for my Audidy 2 ZS and now I have to sound comming from my side left speaker. When I do the speaker tests, all the speakers work except this one.
Is anyone else having this issue. I even reinstalled the drivers again to no avail.
Urgghgh this is anoying. I get dead silence from my side left. I am using Creative T7800 7. Speakers too by the way.
If anyone can help, please let me know.
Thanks,
iLLz

JohnZS wrote:
Hi iLLz I do not have this issue with the new drivers, however may I suggest you uninstall the old drivers first. To do this. Locate the downloaded driver exe. SBAX_WEBUP_LB_2_08_0004.exe Extract this with an application called WinRAR http://www.rarsoft.com Once you have extracted the driver file run the .exe called setup.exe in your drivers folder. eg. SBAX_WEBUP_LB_2_08_0004\Drivers Select the uninstall option. Good Luck
As for additional info ...
When you update drivers by running the setup.exe found on \Drivers -folder, (or ctzapxx.exe found on it's \Support\i386 & amd64 sub folder ) --> select (tag) the "Overwrite existing shared ..." -checkbox --> you do not need to run this uninstall process at all.
jutapa

Squeaking Sound from sides of iPhone 3G

I noticed today when I was on a call with my new iPhone 3G that if I slightly squeeze the sides that it makes a squeaking sound. I'm not sure it the sound is coming from between the silver trim or screen glass or from between the silver trim and back cover. Now the sound doesn't affect the phone in anyway; its just bothersome to know that it makes that sound. I got it on launch day and I don't want too much time to pass by that if it becomes worse over time I won't be able to do anything about it. What is the return policy for the iPhone 3G and would anybody know if they would exchange it on-site for a new one? I don't want them sending me one through Exchange By Mail and I certainly don't want them trying to pass on a refurb to me.

Take it back mate! Why should you settle for a product with defects when you've paid so much for it a committed yourself to a contract? I'm on my 4th Black 16GB iPhone 3G at the moment. I love the phone to bits, but these common defects are beyond a joke. My last handset had:
Scrathed chrome bezel
Creaky chrome bezel
Backlight leakage on the left hand side of the phone
Poorly fitted rubber gasket
Dust trapped underneath the screen
A chunk of glue stuck between my silent switch
Accelerometer wasn't calibrated properly, apps that used it tended to veer to the left
and....
1 dead pixel

No Sound from Side Speakers on P7800

I just got my P7800 speker setup and installed. I have an Intel D95PBL motherboard with a built-in 7.1 sound card. I plugged in the four jacks on the sub woofer (center, front, side, center) to the four jacks on the sound card. I set the switch on the Sub Woffer to "Direct" for use with 7.1 sound cards.
I used Intel's Audio Studio application (http://www.intel.com/design/motherbd/software/ias/) to configure the sound card for 7.1 speakers. I then used their built in test sound to check the channels. The Front, Center/Sub, and Rear speakers all tested perfectly. When I tested the Side channel, I got nothing. No sound what so ever. The graph display for side speakers in the Audio Studio shows there is something being played but I hear nothing out of them.
Does anyone have any suggestions?
T

I am having the exact same problem!!! Please help, I am using a D95PBL motherboard, and i have the P7800 speakers. The problem is that there are four connectors on the side of the audio cable that connects to the sub woofer. However on the one going to the computer, the blue one is missing which is the side speakers one. Is there a reason for that?

Macbook pro making whining sound from left side, macbook pro making whining sound from left side

macbook pro making whining sound from left side,

Time for a trip to the Apple store genius bar. I suspect that your MBP is still under warranty, so use it to your advantage.
Ciao.

No sound from speakers on dv-6245us. headphones only play right side.

Hello.
I have an HP Pavilion Dv6245us Laptop with Windows Vista 32-bit. I use this laptop mainly at work and it sits on my toolbox at work and I connect it to my Creative Home Theatre system via the 2 connections in the front. I switch between both the SPDIF and the headphones jacks from time to time.
Here is the issue: I noticed the other day that when my cable was plugged in the SPDIF connection, depending on how you moved the cord, you could hear audio only on the right side. When I unplugged the cable, i noticed my laptop speakers did not play any sound. I tried plugging into the other jack on the front and both jacks behave the same: any audio device plugged in will only play on the right side, no sound on the left, however when the cable is in the headphones jack, i can move it and i always hear sound, but when i move it around in the SPDIF jack, it cuts out when you move it. still no sound from the laptop speakers.
I thought it was a driver issue, so i updated the drivers and even reformated the entire computer. This did not work. I have read around and noticed that some people say a tab may be stuck in the jack and to try and plug something in and out of it rapidly and that should get it to recognize that nothing is plugged in, however that also did not work.
Just curious if there is anyway to shut off the spdif connection and maybe it would allow the speakers to work again, since that seems to be the jack with the issue, or if there is any other way of solving this issue.
Thanks, Mike.

Anyone? Really cannot find any info on this problem..

Audigy 1 PCI card, only have sound from right side speak

hi guys and gals, I'm thinking my audigy has finally kicked the bucket as i only get sound from of the two side channels, its not a cable or speaker issue, and can find no loose connection or burn through on the card, anyone had this problem is there some simple fix or should i just buy a new card :P
Cheers
Raiden

Wow, so after testing it in linux and not working, i thought to myself definitely something in the connections.
So I look at the sub/rear/front connectors and decide to just disconnect and reconnect them. Surely, enough the rear connector on the soundcard wasn't in all the way hence the only rear speaker working.
Well after spending a day on this and finding the very simple fix all i can say is DOH

Creative Inspire t7900 side, back center problem

My side speakers, back speakers and the center speaker give no sound. But when I test the speakers I can hear sound from front left,right,sub and also center. I Cant hear both side speakers and the two at the back. I can hear sound from the sub when I test the back speakers(not a sub sound a speaker sound comes out of the sub) help please
My old 5.1 speakers working fine

You might want to follow the instructions in this knowledge base article to check if the speakers are working properly. Click on Speaker and Headphones -> Testing Speaker Systems with a Portable Device.
This should help you narrow down which device is working properly, the sound card or the speakers. I won't be able to comment on the AD988B 7.1 high definition audio device because this is a third-party product. You should seek help from the respective company if you need help on troubleshooting the audio device.

Inspire 5200 5.1 sound from both R & L rear speakers coming from left rear speaker only

I have done a complete sound system check, every thing check out good. From the rear speakers I am only getting sound from left rear. When i do a speaker check, when right rear speaker lites, sound comes from left rear. when left rear speaker lites sound also comes from left rear speaker.

creek,
You may have to check with your sound card manufacturer for special setting to upmix the Stereo to the rest of the speaker.
If you are using Creative 5.1 sound card, you can refer to the link for the CMSS upmix feature.
http://forums.americas.creative.com/...essage.id=2563
Jason

TS2771 only getting sound from one side of the headset. Any fixes available?

I have an used Ipod touch. When i connect a headset, i only sound from one channel. Any fixes out there?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

No sound from rear speakers on my Inspire 5500, all I get is a hissing sound! :(

Hi ppl, im new ere.
I just bought a Surround sound, i put it together, play music, and thers no sound from my rear speakers. its the same when i play a game and look at a DVD (which DO support 5.1 sound)
I already made sure all the connections in the amp and subwoofer are in properly and they are...
And I also know that it cudnt be my sound card because it also supports 8.1 and im only trying to use a 5.1.
Please help someone....
All help is greatly appreciated
Dave

Hi Dave,
First things first. For music and games (and the speaker test in Windows), what you're experiencing is normal. A digital connection like coaxial or optical SPDIF can only pass over either an encoded stream (like AC3 on DVDs), or a stereo PCM signal. If you're playing music/games, the sound is not an AC3 stream, but essentially several stereo signals. The connection simply cannot pass this over. For more detail, read this forum thread and this knowledgebase article. You can turn on the upmix function on the decoder to give sound out of more speakers, but this is an effect, so you will not get the positional sound out of games for instance.
For DVDs however, this should work perfectly, as you are sending an unprocessed AC3 stream from the system directly to your speakers. All you need to do is adjust the settings and it should work fine. Make sure the DVD software's audio option is set to SPDIF/bypass, rather than 5.1. Choosing 5.1 in the software will make it decode the signal rather than pass it through. Then check the settings for the card and it should work.
Cat

Audigy 2 ZS and Inspire T7900 Serious Problems!

Hey Guys I'am a guy from germany and I have serious problems with my speaker system!
Following System:
Windows XP Professional with SP2Creative Audigy 2 ZS SoundcardCreatice Inspire T7900(7.1) Speakers
My Problem:
No Surround!My Card is configured to 7.1 Speaker System, I have the newest Drivers from the page and all is 100% correct connected although wenn i make a Speaker Test in the THX Konsole the Guy only speaks from the Front speakers!!left frontspeaker: front left,side left rear leftright frontspeaker: front right, side right, rear right, front middle
(order of the announcements aren't right here)
when i connect 2.0 speakers from my brother to the green plug the same happens!!
What's going on here?!! is that a BUG?
please help
grettz Kai

It sounds like the soundcard drivers aren't installed properly or aren't being properly configuring the speaker settings.
Try changing to 2.0/2.1 and 4.0/4.1 and see if those modes work with the speakers connected as they are. If they do then 'tis a software problem and uninstalling and reinstalling the Audigy drivers should fix it (hopefully).

Incompatibility between Audigy SE onboard and Inspire T7900 7.

Hello?I have bought the Creative Inspire T7900 7. speakers. I have a motherboard MSI K8N Diamon Plus with Audigy SE on board?My side satellites don't work !!!?I mention that:- I have the latest audio XP drivers for my on board audio- the cables are in the right positions- the soft settings are put on 7.- the CMSS is on- in my motherboard help book I saw a drawing (schematics) where for an 8 channel sound (7.) you have to have 4?jacks which?will be connected to?the audio board- the cable from Creative, which connects the sub (amplif) with the PC, has only 3?jacks?for the PC end
?Please help me!?Thank youMessage Edited by dragossalvetiu on 07-3-200708: PM
Message Edited by dragossalvetiu on 07-3-200708:2 PM

Disconnect the grey audio cable from the speaker subwoofer and grab a piece of 3.5mm minijack stereo cable. Connect one end of the stereo cable to the audio port on the speaker that you have just disconnected and the other end to your onboard audio side audio jack.
Jason

Inspire T7900 no sound from side...

Similar Messages

Maybe you are looking for