Inspire TD7700 and Audigy 4 Pro connection problem

I have a problem connecting the speaker system Inspire TD7700 with the soundcard SoundBlaster Audigy 4 Pro. The soundcard has a hub that is placed outside the computer, and it is connected to the soundcard inside the computer via two AD_LINK inputs/outputs. The soundcard is also connected to the switch (that was included in the speaker system), in front of the switch (where it says "from pc, input"). The front of the switch is also connected to the sub via something called "To speaker, Output". It is connected to the sub via the audio inputs. The back of the switch is connected to the decoder (DDTS-100, included in the speaker system). The input of the decoder I have used is called "Audio Outputs". The switch is set to "PC - Audio". Both the sub and the decoder is connected to a power supply unit.
My problem is that I can't hear a thing trough the speakers. I can hear sound trough my headphones when I connect the headphones to the sound hub (included with the soundcard). But when I connect my headphones to the decoder, I can't hear a thing.
Can somebody please help me, I really want my new speaker system to work..
Thank you in advance!
Mathias

Just click on the one you want to use, and then click on "Set Default", and then you can use it. Here's a hint for you, you do that and your current default (Line-in 3) will become "Currently unavailable". Vista only allows one input and one output device to be acti've at a time, hence why they all say unavailable.

Similar Messages

  • IPhone music will not respond to Play button after being paused. The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

    iPhone music will not respond to Play button after being paused.
    The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

    Do a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

    When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

    FRANK M
    What computer operating system is your Premiere Elements 9 running on? I will assume Windows 7, 8, or 8.1 64 bit for now.
    As for the Help Menu/Update way for updating, are you doing that with antivirus and firewall(s) disabled? If not, please do so.
    Do you have the 9.0.1 Update of the program installed? What version of Camera Raw do you have installed?
    Premiere Elements 9 is an older program where you can still do manual installs for that one and only Update. And, Camera Raw for 9 is no longer being updated.
    For the 9.0.1 Update
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
    Camera Raw (last update possible for 9) is 6.5
    Camera Raw-compatible Adobe applications
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
    Please review and consider the above, and then let us know the outcome.
    Thank you.
    ATR

  • Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feed

    Lacie Speakers and Mac Pro Firewire problem waking from sleep and loud feedback. I had a powermac before this with the speakers and it worked fine. But the mac pro is having these issues. Is it the firewire port or the speakers or (and most likely) just a firmware glitch with mac pro? Anyone else see these issues?

    http://web.mac.com/jerimydulay/Site/MyAlbums/Pages/Lacie_FirewireMIDI.html
    Here is my audio settings. For some reason I wish I could remember what I did. It was actually the Apple Store tech in the Unversity Village in Seattle that gave me the idea and I swear I had to change the settings in MIDI setup. Now that Leopard is out it seems the MIDI stuff has been redone. I included screenshots of my MIDI setup as it is currently to see if you see something different on your computers. Let me know!

  • RS480M2 and Audigy 2 freeze problem

    Is there somehow who is able to run an Audigy 2 on a RS480M2 board?
    I've done some googleing to realize that no one seems to be able to run an Audigy 2 on that board. After some time (10 minutes, 1 hours, some hours, etc.), the computer freezes. Some are talking about conflicts between the onboard LAN controller and the Audigy 2 both nobody made the combination work even when tweaking devices IRQ. Do somehow know how to make this work? Is there a way to disable the onboard LAN? It's not a very good solution, but I would still be able to use my Audigy 2.
    My setup:
    Antec 1080Amg (430W)
    AMD64 3000+
    MSI RS480M2
    Audigy 2
    1 Gig Corsair Value Select DDR400 Dual Channel
    Raptor 74 Gig
    As you see, the Audigy 2 causes problem with just the onboard peripherals.
    Thanks for all your comments. I hope that MSI support is aware of that problem.

    Quote from: Junkie248 on 17-March-05, 11:15:47
    Is there somehow who is able to run an Audigy 2 on a RS480M2 board?
    I have an RS480M2-IL and I'm running an Audigy 2 Platinum EX with no sound card issues so far.  I didn't do anything exotic in my BIOS settings.  I have some other problems but they are not sound card related.  The card is installed in the farthest slot from the CPU.  I had to use an adaptor to get the extra supply cable to the card because the ANTEC Aria doesn't come with a floppy power connector on the PSU.  I have  the external module installed as well with Firewire and MIDI ports and remote control all working. 
    The card works for Cubasis/Soundfonts and VST plugins such as Crystal and Supersaw.  It's much more responsive in this system than in my old PIII system especially for Crystal (a very CPU demanding additive synthesizer).  I am using on board video (64MB) and LAN.  FSB is 1000MHz.
    I can do a detailed check of my BIOS settings if you want.
    The install of all of the Audigy S/W was not clean.  I migrated my hard disk from my old PC and re-instaled WINXP over what was already there so this is not a ground up build (I'm kind of surprised that it works).
    Let me know.

  • 9780 and Playbook bluetooth connection problem

    I have never experienced bluetooth connecting problems between my 9780 and Playbook 64 previously ... but for last few days I cannot connect them. I have deleted both devices and re-paired successfully. I have turned both fully off (removed 9780 battery) and still no connection.
    I have tested both devices by successfully connecting each of them to other bluetooth devices. They just will not connect to each other for some reason.
    The only change was the recent Playbook Software update.
    I use the Bridge and Tethering all the time and so need Bluetooth to be working ... thanks for any assistance.
    Solved!
    Go to Solution.

    maybe you can uninstall then reinstall the Bridge app on your 9780.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Bluetooth iPhone 4s and MacBook Pro connecting

    I need some assistance with the connection between iPhone 4s (OS 6.0.1) and MacBook Pro (OSX 10.6.8). I paired the machines but I cannot connect them.

    The Iphone is designed to only connect with wireless speakers, headsets, and keyboards through bluetooth. You are not able to pair the iphone with a mac through bluetooth. It is an unfortunate device limitation :/

  • Radeon X1900 and mac pro graphics problems

    Hi all,
    i've a mac pro with two xeon cpu's (2,66GHz) in it. 2GB main memory and a radeon X1900 graphics card. on this mac i use bootcamp beta 1.4, installed the newest driver for this version from the apple support side. also i have updated the graphics FW to the newest version. so all things are on up to date.
    my problem is the following: if I play some very graphics intensiv games like STALKER or BIOSHOCK (yes i use my mac for works and sometimes to play), it seems that the graphics card will be to hot. I get a lot of pixel errors. horiz. lines and after a while windows xp is freezeing. so I must reboot the maschine. also VPU recovery comes up.
    I've tried several settings (800x600/1024x768/until maximum). 2-3 minutes the game is running well. after that my fans spin up like a plane, get the errors on the pixel side and the game crashes or windows xp is freezing.
    i don't know any solution yet. can anyone help me? have some others the same problem?
    many thanks
    Andy

    Hi There,
    I was having the exact same problem playing command and conquer 3 in Win XP. I'd play for about 5 minutes or so with the fans spinning at full speed (sounding like the mac was about to 'takeoff'), and then it would just crash.
    I followed the advice here, took the graphics card out, clean the dust out and hey presto, the problem was fixed! My MacPro is about 6 months and i was surprised how much dust had got clogged up in there!
    

  • Pages and Numbers not sync between ipad and macbook pro. icloud problem?

    My Pages and Numbers are stopped synchronizing via icloud between ipad and macbook pro. Everytime I edit something to Pages or Numbers on my ipad, my ipad failed to upload the edited version to icloud. what happened?

    I have a slightly different problem with Numbers and Pages failing to sync between a Macbook and iPad via iCloud. I have checked all the obvious settings. I think the problem may be that the Macbook username is my email address, whereas the iPad username is my wife's email address. However, both addresses are named alibis for exactly the same email address from our internet provider – eg we get the same emails, despite appearing to have different addresses. So I don't understand why the iPad cannot pick up Numbers or Pages files that have been opened and saved in iCloud on my Macbook. Other apps, such as iCal, sync perfectly, but i guess they don't use iCloud. Any help appreciated!
    (We have tried emailing Numbers files to the iPad, but that is very slow and innefective.) 

  • E65 and Pc Suite Connection Problem

    Hi Everyone,
    I seem to have a problem with my E65. My goal is to synchronize my calendar in Lotus Notes, with my E65, every 30 minutes when I am around the laptop (via bluetooth).
    However, although I am able to connect to my phone via bluetooth from PC Suite (I can see the files in my E65 form my laptop, connect via gprs, etc.), the synchronization doesnt work. It used to work a while back, but then, I remember having similar problems.
    In PC suite v.6.85.14.1, when I click on, "Click here to connect a phone" and choose bluetooth connection in the popup box, my phone appears in the list, with a handshake and a lock icon next to it (paired). I select my phone in the list, hit next, and it says "You now have the following connections available: Arda E65". Great! But when I go back to the PC Suite, it still says "Click here to connect a phone". Damn!
    Also, there is a PC Sync icon in my taskbar. Click on it, and the Nokia PC Sync comes up. The synchronize now option is faded out, and only View last report and Select Phone is available. When I click on Select Phone, nothing comes up..
    Can someone please help me with this problem as I really need that feature. That was one of my reasons for buying the Nokia E65...
    Thanks in advance,
    Arda..

    Hi,
    Ever find a fix ?  My problem is below (seems very similar). This group has not helped me yet.
    /t5/Connectivity/Nokia-6350-bluetooth-connection-t​o-PC-may-or-may-not-resume/m-p/724267/highlight/tr​...
    Neel

  • Macbook pro and Iphone5 bluetooth connection problem

    my Iphone 5 will pair with my macbook pro with bluetooth but when i try to connect it says unsupported devicebl

    Thanks for your reply.
    In the Print and Scan Preference how many printers do you have installed? - one.
    If only one which I assume is USB, try installing the Cannon as a network printer. - It doesn't specify that it is connected by USB. It says that it is "in use, Default". There is a tick in the box alongside "Share this printer on the network". Is there somewhere else that I need to access to install it as a network printer?
    If you have already installed it as a network printer  open the print queue from the Print and Scan. Click on the Printer Menu and run Netwrok Diagnostics.
    I entered the print queue but there is no option to click on Network Diagnostics because it is greyed out.
    There are tick boxes alongside:
    Screen sharing
    File sharing
    Printer sharing
    Scanner sharing
    Remote login
    Remotemanagement
    Remote Apple events
    Internet sharing
    Bluetooth sharing
    with a tick alongside Printer sharing.
    Many thanks.

  • Ipod Touch and Macbook Pro Bluetooth problems (ISO4 related)

    Hi all,
    Before the update I wasn't having any problems, but now when I try to connect with bluetooth I can pair, but it won't connect. It says I don't "have the necessary services" for bluetooth. Any ideas?

    I bought a Macbook Pro and ipod touch 3 weeks ago. I am shocked and disappointed to learn that i'm not able to connect these devices via bluetooth. Searching through forums and discussion pages I see that this is by design. I fail to understand why.
    On more occasions than I care to comment I have defended Apple products against sceptical attacks that dismiss the company's innovation as pure hype and suggest the proliferation of its 'locked' and 'exclusive' features signal the rise of the 'new dark side'. I have been left with little argument to continue this defence.
    I regret that I will seriously reconsider my next purchase of an Apple product.

  • In subject to tv and macbook pro connectivity.

    Hi people,please tell me how to connect my sony bravia bx320 lcd 32" to macbook pro,this is so i can watch movies on my lcd via macbook,so please explain what should i do.secondly please tell is there any Mac version for vlc player and of any video converter?

    How old is your MBP?  Assuming it's a recent one (i.e. bought new within the last couple of years) and that your TV has an HDMI input then you will need a mini-displayport to HDMI cable.  Apple sell one:
    http://store.apple.com/uk/product/H7128ZM/A/mini-displayport-to-hdmi-cable-2m?fn ode=MTY1NDA3Ng
    Regarding VLC, yes there is a version of VLC for Mac - the new version 2 has recently been released.

  • IPod Nano 4GB and Dension IceLink connection problems...

    Hello,
    I have just bought a Dension IceLink Plus to connect on my car's head unit (BMW).
    I have tried to connect it, but my iPod (purchased last week) isn't recognised... The only way to listen to the music on the car's speakers is to play the iPod before connecting it... I have upgraded from version 1.1.1 to 1.2, but it didn't help.
    I have however a friend that has the same iPod (purchased six month ago) that had initialy version 1.0 and it works perfectly with the IceLink... I have upgraded it to version 1.2 thinking it wouldn't work, but luckily for him that's not the case...
    Do you know what could be wrong with my iPod?
    Thank you for your help,
    Alx

    I'm having a very similar problem to this.
    My girlfriend has an old 4Gb iPod Mini (Hard Drive model) that works flawlessly with the connection cable.
    I have an 8Gb Red Nano (Flash Memory) and it works fine except when I skip between 15 and 20 songs using the steering wheel, it freezes the iPod and the head unit has an "Aux-In" error. The firmware on my iPod says 1.1.3 and the recommended firmware in the manual is 1.1, so I guess this is the problem. Unfortunatley, 1.1.3 is the firmware my iPod came with and I can't roll it back any further.
    I'm going to send an email to Apple technical support and see if I can get any help. Hopefully, Mini/Apple has a system in place for ensuring compatibility with past/future iPods either through the iPod itself or even through dealer servicing. It is kind of annoying that the firmware on my iPod Nano purchased in 12/06 is incompatible with the iPod adaptor in my Mini purchased in 05/07...

  • Hard drive and airport extreme connection problem.

    Hi folks,
    I have an airport extreme and a WD 1TB pasport for mac hard drive. I had it connected for ages and used it to load movies onto to keep my macbook empty. I had no problems accessing it wirelessly through Finder until today when i configured the extreme to run at 5ghz. When i try to connect now, it tells me that the ip address is wrong but im connected to the extreme for internet. Any clues or solutions?

    your Airport Extremes ip address is the red square, Then your going to copy that
    So in the red box instead of Http:// we are going to put ftp:// then you should get
    a pop up say connecting to server and I hope you do get that.

Maybe you are looking for