Inspire TD7700 : no sound with the side speakers

Hi :robothappy:.
I bought a CREATIVE Inspire TD7700 speaker system that I connected to a SHUTTLE SN25P.
The problem is that I've got no sound in my side speaker (they are right connected).
The build-in SHUTTLE sound card is a VIA Envy24 Vinyl Audio.
Do someone know how to get sound in the side speaker please ?
Thanks :robotwink:.

Thank you very much for answering so fast :robothappy:.
It's right, this is well a story of a 4 jack end-3 jack end audio cable but how do I connect the additional cable ? where ?
Because, it's a bit difficult to expain (my English is not very good with technical terms), my speakers are all connected to the subwoofer which is connected itself to a box (Switch Box) with 4 jack end. This box is connected to the DDTS-00 Decoder and to the SHUTTLE with another 4 jack end-3 jack end audio cable. So ther is no more free connector for the cable you talk about...
Thanks again.
Message Edited by CyberSam on 01-14-2006 05:29 AM

Similar Messages

The sound doesn't work. It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume. When we try to play songs, it acts like it's going to play and then goes back to the play list. Restored and still no

It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume. When we try to play songs, it acts like it's going to play and then goes back to the play list. Restored the device and still no sound.

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Sound from Apple Earpods only comes from the side speakers?

**** i normally sometimes use my Apple Earpods but today i have realised that the sound only comes from the side speakers, i've cleaned the other speakers however that doesn't help

There is only one speaker for each ear. See here.

5.1 sound with 7.1 speakers

I'm trying to get 5.1 sound through my av reciever which has a 7.1 setup. I have an onkyo HT-R580 and the Fatal1ty Pro. I'm getting all the sound I want but the rear speaker sounds are coming out of the side speakers. I'm getting proper sound with all my other devices (ps3, xbox 360, tv receiver, and even the av receiver itself), so I know its a problem on my computer. I have windows 7 with all the updates and all updated drivers for the sound card. Any help would be appriciated. Thank you.

Ah, so you are using an Creative Sound Blaster X-Fi Titanium Fatal1ty Pro Series, PCIe!? Sry, on the source i looked before I couldn't found any Fatal1ty Pro than XtremeGamer, but you could have written that already a bit more detailed before. Sure the Titanium has optical output - either i wouldn't recommend that card and output, maybe just in rare cases because:
- No Titanium card can even decode any Dolby/DTS, just Titanium HD can Encode DDL/DTSC .
- As i said optical only provides 5.1 so anything else just can be upmixed with an 7.1 receiver.
- Optical ( <a title="6Mbits" target="_self" href="http://de.wikipedia.org/wiki/Sony/Philips_Digital_Interface#Zukunft">6 Mbit/s[/url] under special conditions) doesn't have enough Bandwith for Dolby True HD (<a title="18Mbits" target="_self" href="http://de.wikipedia.org/wiki/Dolby_TrueHD">18 Mbit/s[/url]) and DTS-HD Master (<a title="24.5Mbits" target="_self" href="http://de.wikipedia.org/wiki/Digital_Theater_Systems_High_Definition">24,5 Mbit/s[/url]). Here you would need Analog (even <a title="Intel HD-A 48Mbits" target="_self" href="http://www.elektronik-kompendium.de/sites/com/0912201.htm">Intel HD-A provides 48Mbit[/url] on stereo) or HDMI (yet only <a title="1.3a X-FIs" target="_self" href="http://geizhals.eu/?cat=sndpci&sort=artikel&bpmax=&asuch= dts&asd=on&v=e&plz=&dist=&filt er=+Liste+aktualisieren+&xf=994_PCIe~1217_24bi t%2F192kHz">1.3a X-FIs[/url] are available so <a title="8.16Bits" target="_self" href="http://de.wikipedia.org/wiki/High_Definition_Multimedia_Interface">8,16 Gbit/s[/url] shared with video).
So what are your settings on your PC? You should set 5.1 and let the receiver upmix it to 7.1. Anything else can't work. Check also: [url=http://forums.creative.com/t5/Sound-Blaster/X-Fi-Titanium-Fatal1ty-Pro-Series-Optical-Out-Connection/m-p/586189#M163016">http://forums.creative.com/t5/Sound-Blaster/X-Fi-Titanium-Fatal1ty-Pro-Series-Optical-Out-Connection/m-p/586189#M163016[/url]

For 1/11/11 expert day: can hear sounds on headphones but no sound via the internal speakers

HP Pavilion dv6135nr Notebook internal speakers have stopped working. I can hear sounds on headphones but no sound via the internal speakers. A search on HP customer care for my notebook yielded the download recommendation below, even though I had not stated my problem. However, executing this download did NOT resolve the problem. Please advise regarding resolution to inoperable speakers. I do not know if all of my sound and audio settings are correct, but the mute is not on and the volume controls are properly set. The default device is Conexant High Definition Audio output, per the sound and audio devices properties hardware tab the device status states "this device is working properly." Is it possible that a Skype or Foxfire update is in conflict with this device? If so, how do I resolve this situation?
Thank you.
Description: This package contains the driver for the Conexant High Definition Audio Chip.
PURPOSE: Routine Details and specifications File name:
sp34204.exe [1/1, 1.38M]
System requirements: HP SoftPaq Number SP32646, "Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio," (or later) must be installed on the notebook before installing this SoftPaq. Look for HP SoftPaq Number SP32646 (or later) in the Software and Driver Downloads section of the www.hp.com website. Released: 2006-12-01 Version: 3.26.0.0 A Compatibility: Microsoft Windows XP Professional, Microsoft Windows XP Home Edition, Microsoft Windows XP Media Center, Microsoft Windows XP Fix/Enhancement: Fixes issue where the notebook speakers do not work after headphones or earphones are used for a while and then unplugged.

Re: Fixes issue where the notebook speakers do not work after headphones or earphones are used for a while and then unplugged.
HOW DO YOU FIX THIS?? I cannot find the correct Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio that works with my computer...
My computer:
VISTA
HP Compaq 2230s Notebook PC
Everytime I use my headphones for more than an hour or two, the **bleep** audio will not play on my notebook's speakers, just through the headphones. Usually restarting a few times resolves the problem, but not this time. If I knew that HP computers sucked this much I would never have spent so much money on this one!!!
Can you please tell me how to fix this problem once and for all? Thanks!!

Only sound in the front speakers, AUDIGY 2

I own an Audigy 2 ZS, I have to format my machine and then reinstall my devices but when I play a DVD I don?t hear any sound in the rear speakers or in the center speaker, I activate CMSS and configure the speakers. When I test the speakers all of them are working, what can be the problem?

You need a software player (e. g. PowerDVD) or hardware who does decoding because the audigy does not do it (at least mine didnt).
With PowerDVD you would need to activate 6 channel output and dolby sourround in his options.
If you do not get it to run try it over coax but remember that you might have to activate coax in your softplayer as well.

SoundBlaster 5.1 no surround sound with the speaker test, but with movies

ISoundBlaster 5. no surround sound with the speaker test, but with moviesO Hello I have a new SoundBlaster XFi Surround 5. USB.
I installed the drivers on Vista 32.
I connected the Soundblaster with an optical cable with my home cinema system.
I checked the 5. speakers option in the Creative Console Starter.
When I will test the surround function by clicking the speakers in the surround test diagramm from the Console.
The front speakers are sending an testsignal, but the rear speakers and the center are silent.
I thought that are settings in the soundcontrol from vista but when I play an Movie with 5. sound, the rear speakers function.
Is ist the optical mode that only support the movie dts signal? Why the Console test from creative doesn't function?
I have further applications but they don't work. Only movies.
Thx

Hi,
S/PDIF?format can only transmit 2 channels of uncompressed audio, which is why you only hear the front channels. For movie dts, an encoded compressed stereo data is transmitted through the S/PDIF optical link to your home cinema system which then decode it into 5. audio.

HT4528 Since updaing to IOS 7 on my 4s I have not had volume/sound and the side controls are not responsive. Thoughts?

Since updating to ios7 back in October I have not had sound or been able to control the volume with the side buttons. Thoughts on a fix?

Same problem here on my 4s: Control center music controls do not work.
Since this thread has two issues, I'm going to start a new one with only the music control bug. Topic: iOS 7 Control Center Music Controls Not Working On iPhone 4s

Problems with the side volume buttons

I can no longer control the ringer volume with the side buttons. The buttons will work if the headphones are plugged in. Any ideas?

Restart the device. http://support.apple.com/kb/ht1430
Reset the device. (Same article as above.)
Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Why don't the alerts sound with the cover on my ipad 3

The alerts for email, Facebook, actually any of the alerts won't sound with the apple cover on my ipad 3. Why is that and is there a way to get around that? I'm pretty sure it used to when I first got it, now they all sound the second I open the cover. What is that about. Did I change some setting or something?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How do i fix the sound on an iPhone 4S? When i play music the sound bar at the bottom disappeared and when i try to adjust sound with the buttons on the side, nothing happens. Also the sound in my apps is not working.

The sound isn't working. And it also does not appear, when i try to adjuct it with the buttons the sound bar doesn't appear and when i try playing music at the bottom the sound bar disappeared. How do I fix this?

Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device. Have you gone through ALL of these troubleshooting steps?
If you have gone through all the troubleshooting steps and you're still having problems, you'll need to bring your phone into Apple for evaluation.

Loss of sound with the Gigaworks S750 system

Hi,
I just recently purchased a Gigaworks S750 speaker system and I ran into a problem. Every-so-often, randomly, my entire system will just stop playing any sound. This last for a random amount of time (5 second to 30 mins). I've triple checked the wires and even taken the system down and re-set it up. I know it'ss not the sound card (recently purchased Audigy 2 ZS) and it'ss not the drivers (updated them many times). I know it'ss a problem with the speaker system itself as I split the signal from my soundcard out to both my headphones and my speakers and my headphones continue to work during the outages. When I plug my headphones into the jack on the control unit of the S750 during an outage, the sound plays through them. Any help you can give me will be greatly appreciated!
Thanks,
Riley
Message Edited by RileyKash on 02-02-2005 02:28 AM
Message Edited by RileyKash on 02-02-2005 02:28 AM

It turns out that I was wrong about one thing, once the USB port on the right side of my computer stops working for the US-122, it seems to shut down until I restart the computer. I thought that it worked after the US-122 went down and was unplugged because another device will receive power from the port when plugged in. It turns out that although the new device will power up, it won't be recognized by the computer. I appreciate any help or ideas. Thanks.
---Will.

Dell OptiPlex 3020: I only get sound from the internal speakers

I have a brand new Dell OptiPlex 3020 running Windows 8.1. I am able to hear through the internal speakers, but I cannot get external speakers or headphones to work - I've tried both the jacks on the front and back.
The microphone on my headset works correctly, but I still hear only through the internal speakers.
Advice?

Good day!
Thank you for writing to the Dell Community Forum.
Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
Have a great day ahead.

HP pavillion g6 buzzing sound from the internal speakers

suddenly the internal speakers of my HP Pavillion G6 has started creating a buzzing sound whenever i play music . Even when i turn on the laptop the buzzing sound is there with the welcome tune. how can i fix it? im very worried about my laptoop.

Hi Homieboiudoc,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6 Notebook and buzzing on the sound. Here is a document on troubleshooting Audio issues.
You might benefit from overheating document as there could be dust on the speakers.
Here is a fix from Microsoft that has helped sound issues.
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok
Restart the computer.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Various audio problems with the onboard speakers but not the headphones.

The little volume wheel is connected to a variable resistor, which is soldered to the motherboard via 7 pins. when the wheel loosens up, or the pins loosen up, the onboard speakers get flaky or just don't work. We've been seeing this type of problem for a while now, and just thought that the general public should know. Either replace the motherboard, or the volume controller, or wiggle and jiggle the wheel when it gives problems. good luck all, and i hope this little tid-bit helps out.
Kudos for Linux and all freeware!!

Hi,
Try the following.
First, download and reinstall the Chipset driver on the following link.
Chipset Driver - Windows 8
When the reinstallation has completed, restart the notebook.
When windows has reloaded, download the IDT Audio installer on the link below and save it to your Downloads folder.
IDT Audio Installer - Windows 8.
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio through headphones.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Inspire TD7700 : no sound with the side speakers

Similar Messages

Maybe you are looking for