Inspiron N5010 - Shutdowns
Hello dear Arch community,
I currently have a dual-boot between Arch Linux and Windows 8, but I have been forced to use Windows for like a month now because every time I boot Arch, it would shutdown less than 10 minutes. After that, whatever I boot, it will shutdown the same way until I let my laptop rests for like 15 minutes (Well, maybe less). The weird thing is that this does not occur if I boot Windows in the first place. I have tried to boot an Ubuntu live-CD, but it shuts down even faster than Arch. I haven’t tried any other live-CD though.
I have had regular shutdowns because of overheating about a year ago and it was way worse with Arch than Windows, but it was fine after I cleaned up the inside of my laptop. I don’t think that’s the problem right now, because it is simply not hot at all when I check its heat after the shutdowns. Could damages caused by overheating in the past be the problem? But if it were, how could Windows run just fine?
I really hope there’s a way to solve this, I am getting tired of Windows, it’s a pain to use on a daily basis, especially W8…
I don’t really know what kind of information you’ll need, so just ask and I’ll tell you. Some basic stuff:
Arch Linux x64 (iirc) & KDE
Windows 8 x32
Intel Core i3
Thank you in advance,
spkag
Last edited by spkag (2013-02-02 11:03:38)
hader alkraway
the labtob loss sound suddenly
Hello.
> Plug in headphones to see if audio is getting to the headphone jack.
> Use Windows System Restore. (Type system restore into the Windows search box.) Select a restore point dated earlier than when the issue began
> Download and install a fresh copy of the audio driver from your model's support page
> If you continue to get the error code or cannot install the audio driver, run the audio tests in Dell 32-bit Diagnostics if your model has it (it is not on newer models). If you no longer have the 32-bit Diagnostics you might have to perform a system recovery in order to complete the diagnostic.
If you need more help please reply back with the full model name of your laptop and its operating system.
Similar Messages
-
[SOLVED] Function Keys Problem On Dell Inspiron N5010
Yesterday I bought a new laptop (Dell Inspiron N5010) and immediately installed Arch Linux on it. But when I launched the installation framework, I needed to use fdisk to partition my drive manually and to open another tty, ctrl + alt + f2 or up to f7, none of them worked. When I use f4 or f5 for example, it changes the brightness of the screen cause these keys have icons on them which represent the brightness control. So I quitted, took care of that fdisk issue and got back, installed Arch Linux successfully. When launched in GNOME 3, nothing was changed. It still uses f1, f2, ... and so on as "just function keys" without using "Fn" key. It's fine somehow cause my system automatically detected those keys, I can use every single function of my keyboard. But without using Fn key, I can't actually use any fx key for my own use. For example, I can't use Tilda anymore cause when I use only f1, it tries to open monitor control stuff.
So... any ideas?
Edit: It seems that this problem is all about Arch Linux. A friend of mine has the same laptop and he has just tried Mint Debian RC and function keys worked properly. So, there's a problem and it seems it's related to Arch Linux (or maybe Xorg version, somehow?).
Last edited by Jeaquares (2011-05-18 13:07:06)xdunlapx wrote:The function key on my dell laptop was set to the F keys, meaning you have to hit the function key and then an F key to activate the F key. I switched it in the bios so I don't have to hit the function key to activate the F keys. So I would have had to hit Fn+Ctrl-Alt-F1 for example to get to TTY 1. Now since i switched it off in the bios All I have to do is hit Ctrl-Alt-F1 to get to the terminal. But in order to turn off wifi from the F key (for example) I have to hit Fn+F2. It's switched.
I can't tell you how this was helpful. I've never noticed that there was an option in BIOS's Advanced menu for this. I updated it as "Function Key" and it solved my problem, thanks. -
I'd like to buy Intel® SSD 530 Series (120GB, 2.5in SATA 6Gb/s, 20nm, MLC) that is an SSD Sata III. Is it compatible on an Inspiron N5010? Any issue I can have? is there a different between a SATA II and SATA III if the laptop is originally SATA II?
ThanksSATA 6G drives work fine with SATA 3G controllers -- of course, not at full speed.
-
Inspiron N5010 (15R) 8 beeps error
Last week my laptop crashed and when I tried to restart there was no display and a continuous 8 beeps. After researching I disovered this was an LCD display error and tried all of the solutions I could find online:
Hold D key on startup, and hold Fn key on startup, none of which worked. Then I tried to connect an external monitor via HDMI which didn't work, but it did work when I connected the monitor via the VGA port. I scanned the system for hardware errors but none came up, the graphics card was reported as working normally, so I figured the problem lies with the display.
I ordered a new screen and fitted it yesterday, but I'm still having the same problem, so it would seem it wasn't an issue with the display at all. Would this mean that the problem lies with the ATI graphics card?
Any help greatly appreciated!Hi JH_KB,
I’d suggest that you follow the steps mentioned below and then check if the beep pattern repeats.
Switch off the computer.
Disconnect the AC adapter from the system.
Remove the battery from the computer.
Press and hold down the power button for 15 seconds.
Then connect back all the peripherals and check if the beep pattern repeats. -
Hi everyone,i am facing two important problems in my Arch Linux
1)Slow boot-up and Shut-down
2)Poor battery life
I am using an Dell Inspiron-N5010 laptop with intel-i3 processor and 3 GB RAM and i have updated my Arch system recently and my kernel version is
Linux 3.12.9-2-ARCH #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014 x86_64 GNU/Linux
Login Manager=GDM
Desktop Environment=Cinnamon 2.0.14
Here is my /etc/mkinitcpio.conf
MODULES="i915 drm_kms_helper msr intel_agp dell_wmi dell_laptop acpi"
BINARIES=""
FILES=""
HOOKS="base udev autodetect modconf block fsck filesystems keyboard fsck"
Here is my output of systemd-analyze blame
5.927s pacman-init.service
4.811s NetworkManager.service
4.686s dkms.service
2.206s systemd-logind.service
2.126s gdm.service
1.672s systemd-vconsole-setup.service
1.327s plymouth-read-write.service
1.232s plymouth-start.service
1.104s kmod-static-nodes.service
1.073s polkit.service
1.038s systemd-fsck-root.service
1.012s systemd-udev-trigger.service
866ms accounts-daemon.service
813ms systemd-modules-load.service
785ms systemd-sysctl.service
785ms sys-kernel-debug.mount
784ms dev-mqueue.mount
784ms dev-hugepages.mount
587ms colord.service
569ms sys-kernel-config.mount
504ms systemd-backlight@acpi_video0.service
496ms systemd-journal-flush.service
422ms systemd-tmpfiles-setup-dev.service
402ms tmp.mount
400ms systemd-tmpfiles-clean.service
396ms dhcpcd.service
233ms systemd-random-seed.service
229ms haveged.service
217ms etc-pacman.d-gnupg.mount
182ms wpa_supplicant.service
181ms systemd-remount-fs.service
129ms systemd-user-sessions.service
115ms systemd-udevd.service
114ms systemd-update-utmp.service
81ms udisks2.service
76ms systemd-tmpfiles-setup.service
71ms dev-disk-by\x2duuid-6ff023ec\x2d720b\x2d4c7a\x2d87ff\x2ddf5224b293c3.swap
63ms upower.service
58ms cpupower.service
56ms laptop-mode.service
51ms rtkit-daemon.service
43ms [email protected]
10ms alsa-restore.service
and still its taking more time to get the Display Manager and after entering my login and password its taking more time to get my cinnamon desktop
I am using Laptop-Mode-Tools ,cpupower(Conservative Governor),Thermald to improve my batterylife but nothing is helping me out its just 45~1 hour in my arch system but its actually 2 to 2.5 hours in my windows 7
and i was googling for good solutions but nothing is helping me to get out of the problems and i hope i could fix this issue by means of this forum.Neburski wrote:
Dinesh raja wrote:No its not Manjaro but an custom system which i have built using Arch-Iso
Ah, anyway identify all the service files for systemd to see if there are some that you don't need. Looks like you already did.
For the slow boot up and shutdown you could give a closer look at dmesg.
Check http://freedesktop.org/wiki/Software/sy … eventually to see how you can save your dmesg for the shutdown part. Then look for entries that have a large gap in time (the numbers in [###] are seconds since bootup).
Can you maybe also define slow. How many seconds / minutes does it take?
its taking 23.099s for Kernel+User space and the time gap between Display Manager and Cinnamon desktop is approximately 30 sto 40 s
here is my dmesg complete output
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.9-2-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=175a6905-635d-455d-a489-e2afaaaeb274 ro quiet splash resume=/dev/sda6 i915.semaphores=1 i915.i915_enable_rc6=0
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b75a5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b75a6000-0x00000000b75edfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b75ee000-0x00000000b75f8fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b75f9000-0x00000000b75fbfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b75fc000-0x00000000b761ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7620000-0x00000000b7620fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7621000-0x00000000b7628fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7629000-0x00000000b762bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b762c000-0x00000000b7630fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7631000-0x00000000b7650fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7651000-0x00000000b7693fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7694000-0x00000000b77fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9e00000-0x00000000bbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Dell Inc. Inspiron N5010/0P2H9M, BIOS A09 10/19/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xb7800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fcda0-0x000fcdaf] mapped at [ffff8800000fcda0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xb7200000-0xb73fffff]
[ 0.000000] [mem 0xb7200000-0xb73fffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xb4000000-0xb71fffff]
[ 0.000000] [mem 0xb4000000-0xb71fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x80000000-0xb3ffffff]
[ 0.000000] [mem 0x80000000-0xb3ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xb7400000-0xb75a5fff]
[ 0.000000] [mem 0xb7400000-0xb75a5fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xb7620000-0xb7620fff]
[ 0.000000] [mem 0xb7620000-0xb7620fff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xb7694000-0xb77fffff]
[ 0.000000] [mem 0xb7694000-0xb77fffff] page 4k
[ 0.000000] RAMDISK: [mem 0x37912000-0x37c80fff]
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 DELL )
[ 0.000000] ACPI: XSDT 00000000b75ee088 0005C (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000b75f7a50 000F4 (v04 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130725/tbfadt-395)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xB762CF40/0x00000000B762CF80, using 32 (20130725/tbfadt-522)
[ 0.000000] ACPI: DSDT 00000000b75ee170 098DF (v02 DELL WN09 00005010 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000b762cf40 00040
[ 0.000000] ACPI: APIC 00000000b75f7b48 00072 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000b75f7bc0 0014E (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000b75f7d10 0003C (v01 DELL WN09 01072009 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000b75f7d50 00176 (v01 DELL WN09 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 00000000b75f7ec8 00038 (v01 DELL WN09 01072009 AMI. 00000003)
[ 0.000000] ACPI: OSFR 00000000b75f7f00 0008C (v01 DELL M08 07DA0A13 ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b77fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb77fffff]
[ 0.000000] NODE_DATA [mem 0xb77fb000-0xb77fffff]
[ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b3c00000-ffff8800b69fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xb75a5fff]
[ 0.000000] node 0: [mem 0xb7620000-0xb7620fff]
[ 0.000000] node 0: [mem 0xb7694000-0xb77fffff]
[ 0.000000] On node 0 totalpages: 751279
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11680 pages used for memmap
[ 0.000000] DMA32 zone: 747283 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb75a6000-0xb75edfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb75ee000-0xb75f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb75f9000-0xb75fbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb75fc000-0xb761ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7621000-0xb7628fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7629000-0xb762bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb762c000-0xb7630fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7631000-0xb7650fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7651000-0xb7693fff]
[ 0.000000] e820: [mem 0xbc000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800b7000000 s86464 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 739514
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=175a6905-635d-455d-a489-e2afaaaeb274 ro quiet splash resume=/dev/sda6 i915.semaphores=1 i915.i915_enable_rc6=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2942184K/3005116K available (5119K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 62932K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12058624 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2260.785 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4523.96 BogoMIPS (lpj=7535950)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000041] Security Framework initialized
[ 0.000053] AppArmor: AppArmor disabled by boot time parameter
[ 0.000055] Yama: becoming mindful.
[ 0.000408] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002121] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002882] Mount-cache hash table entries: 256
[ 0.003130] Initializing cgroup subsys memory
[ 0.003144] Initializing cgroup subsys devices
[ 0.003147] Initializing cgroup subsys freezer
[ 0.003149] Initializing cgroup subsys net_cls
[ 0.003151] Initializing cgroup subsys blkio
[ 0.003177] CPU: Physical Processor ID: 0
[ 0.003178] CPU: Processor Core ID: 0
[ 0.003185] mce: CPU supports 9 MCE banks
[ 0.003198] CPU0: Thermal monitoring enabled (TM1)
[ 0.003211] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.003319] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.004634] ACPI: Core revision 20130725
[ 0.009965] ACPI: All ACPI Tables successfully acquired
[ 0.019630] ftrace: allocating 20320 entries in 80 pages
[ 0.032100] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065112] smpboot: CPU0: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz (fam: 06, model: 25, stepping: 02)
[ 0.171587] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.171595] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.171599] ... version: 3
[ 0.171600] ... bit width: 48
[ 0.171601] ... generic registers: 4
[ 0.171602] ... value mask: 0000ffffffffffff
[ 0.171604] ... max period: 000000007fffffff
[ 0.171605] ... fixed-purpose events: 3
[ 0.171606] ... event mask: 000000070000000f
[ 0.211654] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.198312] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.251580] Brought up 4 CPUs
[ 0.251586] smpboot: Total of 4 processors activated (18093.87 BogoMIPS)
[ 0.254266] devtmpfs: initialized
[ 0.257030] PM: Registering ACPI NVS region [mem 0xb75a6000-0xb75edfff] (294912 bytes)
[ 0.257037] PM: Registering ACPI NVS region [mem 0xb75f9000-0xb75fbfff] (12288 bytes)
[ 0.257039] PM: Registering ACPI NVS region [mem 0xb7621000-0xb7628fff] (32768 bytes)
[ 0.257040] PM: Registering ACPI NVS region [mem 0xb762c000-0xb7630fff] (20480 bytes)
[ 0.257042] PM: Registering ACPI NVS region [mem 0xb7651000-0xb7693fff] (274432 bytes)
[ 0.258060] RTC time: 15:04:06, date: 02/18/14
[ 0.258105] NET: Registered protocol family 16
[ 0.258225] cpuidle: using governor ladder
[ 0.258227] cpuidle: using governor menu
[ 0.258271] ACPI: bus type PCI registered
[ 0.258273] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.258334] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.258337] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.281454] PCI: Using configuration type 1 for base access
[ 0.282099] bio: create slab <bio-0> at 0
[ 0.282221] ACPI: Added _OSI(Module Device)
[ 0.282223] ACPI: Added _OSI(Processor Device)
[ 0.282225] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.282226] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.283469] ACPI: EC: Look up EC in DSDT
[ 0.284754] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.289116] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.302665] ACPI: SSDT 00000000b7621c18 003A4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.303013] ACPI: Dynamic OEM Table Load:
[ 0.303016] ACPI: SSDT (null) 003A4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.303484] ACPI: Interpreter enabled
[ 0.303491] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.303495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.303510] ACPI: (supports S0 S3 S4 S5)
[ 0.303512] ACPI: Using IOAPIC for interrupt routing
[ 0.303547] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.303686] ACPI: No dock devices found.
[ 0.322094] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.322239] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.322442] acpi PNP0A08:00: ACPI _OSC control (0x19) granted
[ 0.322704] PCI host bridge to bus 0000:00
[ 0.322708] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.322710] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.322712] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.322714] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.322716] pci_bus 0000:00: root bus resource [mem 0xbc000000-0xffffffff]
[ 0.322725] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.322744] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.322818] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.322831] pci 0000:00:02.0: reg 0x10: [mem 0xfa400000-0xfa7fffff 64bit]
[ 0.322838] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.322843] pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087]
[ 0.322962] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.322991] pci 0000:00:16.0: reg 0x10: [mem 0xfbd09000-0xfbd0900f 64bit]
[ 0.323088] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.323185] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.323212] pci 0000:00:1a.0: reg 0x10: [mem 0xfbd08000-0xfbd083ff]
[ 0.323324] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.325807] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.325857] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.325880] pci 0000:00:1b.0: reg 0x10: [mem 0xfbd00000-0xfbd03fff 64bit]
[ 0.325979] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.326066] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.326169] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.326222] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.326261] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.326362] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.326415] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.326453] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[ 0.326553] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.326608] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.326649] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[ 0.326750] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.326803] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.326851] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.326878] pci 0000:00:1d.0: reg 0x10: [mem 0xfbd07000-0xfbd073ff]
[ 0.326988] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.329810] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.329853] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.329965] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.330003] pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
[ 0.330187] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[ 0.330216] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.330227] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.330238] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.330249] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.330261] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.330272] pci 0000:00:1f.2: reg 0x24: [mem 0xfbd06000-0xfbd067ff]
[ 0.330340] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.330421] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.330443] pci 0000:00:1f.3: reg 0x10: [mem 0xfbd05000-0xfbd050ff 64bit]
[ 0.330474] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.330575] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.330604] pci 0000:00:1f.6: reg 0x10: [mem 0xfbd04000-0xfbd04fff 64bit]
[ 0.330829] pci 0000:00:1c.0: PCI bridge to [bus 11]
[ 0.330946] pci 0000:12:00.0: [14e4:4727] type 00 class 0x028000
[ 0.330979] pci 0000:12:00.0: reg 0x10: [mem 0xfbc00000-0xfbc03fff 64bit]
[ 0.331144] pci 0000:12:00.0: supports D1 D2
[ 0.331146] pci 0000:12:00.0: PME# supported from D0 D3hot D3cold
[ 0.338279] pci 0000:00:1c.1: PCI bridge to [bus 12]
[ 0.338291] pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.338460] pci 0000:13:00.0: [10ec:8136] type 00 class 0x020000
[ 0.338526] pci 0000:13:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.338640] pci 0000:13:00.0: reg 0x18: [mem 0xd0b10000-0xd0b10fff 64bit pref]
[ 0.338706] pci 0000:13:00.0: reg 0x20: [mem 0xd0b00000-0xd0b0ffff 64bit pref]
[ 0.338752] pci 0000:13:00.0: reg 0x30: [mem 0xfb200000-0xfb21ffff pref]
[ 0.338976] pci 0000:13:00.0: supports D1 D2
[ 0.338978] pci 0000:13:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.339173] pci 0000:00:1c.2: PCI bridge to [bus 13]
[ 0.339178] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.339183] pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfbbfffff]
[ 0.339190] pci 0000:00:1c.2: bridge window [mem 0xd0b00000-0xd14fffff 64bit pref]
[ 0.339268] pci 0000:00:1c.4: PCI bridge to [bus 15]
[ 0.339274] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.339278] pci 0000:00:1c.4: bridge window [mem 0xfa800000-0xfb1fffff]
[ 0.339286] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.339371] pci 0000:00:1e.0: PCI bridge to [bus 20] (subtractive decode)
[ 0.339385] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.339387] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.339389] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.339391] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xffffffff] (subtractive decode)
[ 0.339814] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.339874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.339932] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.339990] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.340047] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.340106] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.340164] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.340222] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.340440] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.340472] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.340534] Found 1 acpi root devices
[ 0.340641] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.340644] vgaarb: loaded
[ 0.340645] vgaarb: bridge control possible 0000:00:02.0
[ 0.340690] PCI: Using ACPI for IRQ routing
[ 0.350522] PCI: Discovered peer bus ff
[ 0.350524] PCI: root bus ff: using default resources
[ 0.350525] PCI: Probing PCI hardware (bus ff)
[ 0.350548] PCI host bridge to bus 0000:ff
[ 0.350551] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 0.350553] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.350555] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 0.350561] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.350602] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.350643] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.350680] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.350718] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.350756] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.350804] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[ 0.350807] PCI: pci_cache_line_size set to 64 bytes
[ 0.350880] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.350882] e820: reserve RAM buffer [mem 0xb75a6000-0xb7ffffff]
[ 0.350884] e820: reserve RAM buffer [mem 0xb7621000-0xb7ffffff]
[ 0.350886] e820: reserve RAM buffer [mem 0xb7800000-0xb7ffffff]
[ 0.350986] NetLabel: Initializing
[ 0.350988] NetLabel: domain hash size = 128
[ 0.350989] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.351002] NetLabel: unlabeled traffic allowed by default
[ 0.351040] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.351046] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.353079] Switched to clocksource hpet
[ 0.357893] pnp: PnP ACPI init
[ 0.357912] ACPI: bus type PNP registered
[ 0.358057] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.358060] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.358062] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.358064] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.358066] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.358070] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.358105] pnp 00:01: [dma 4]
[ 0.358125] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.358162] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.358187] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.358217] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.358267] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.358270] system 00:05: [mem 0xfe800000-0xfe8001ff] has been reserved
[ 0.358273] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.358309] pnp 00:06: Plug and Play ACPI device, IDs DLL0447 SYN0600 SYN0002 PNP0f13 (active)
[ 0.358347] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.358508] system 00:08: [io 0x0400-0x047f] could not be reserved
[ 0.358511] system 00:08: [io 0x1180-0x119f] has been reserved
[ 0.358513] system 00:08: [io 0x0500-0x057f] has been reserved
[ 0.358516] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.358518] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.358520] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.358523] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.358526] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.358636] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.358854] pnp: PnP ACPI: found 10 devices
[ 0.358856] ACPI: bus type PNP unregistered
[ 0.365989] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 11] add_size 1000
[ 0.365994] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 11] add_size 200000
[ 0.365996] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 11] add_size 200000
[ 0.366007] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 12] add_size 1000
[ 0.366010] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 12] add_size 200000
[ 0.366040] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.366042] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.366044] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.366047] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.366049] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.366053] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbc000000-0xbc1fffff]
[ 0.366056] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbc200000-0xbc3fffff 64bit pref]
[ 0.366059] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbc400000-0xbc5fffff 64bit pref]
[ 0.366061] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.366064] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.366066] pci 0000:00:1c.0: PCI bridge to [bus 11]
[ 0.366071] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.366077] pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbc1fffff]
[ 0.366082] pci 0000:00:1c.0: bridge window [mem 0xbc200000-0xbc3fffff 64bit pref]
[ 0.366089] pci 0000:00:1c.1: PCI bridge to [bus 12]
[ 0.366093] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.366100] pci 0000:00:1c.1: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.366104] pci 0000:00:1c.1: bridge window [mem 0xbc400000-0xbc5fffff 64bit pref]
[ 0.366112] pci 0000:00:1c.2: PCI bridge to [bus 13]
[ 0.366116] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.366122] pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfbbfffff]
[ 0.366127] pci 0000:00:1c.2: bridge window [mem 0xd0b00000-0xd14fffff 64bit pref]
[ 0.366135] pci 0000:00:1c.4: PCI bridge to [bus 15]
[ 0.366139] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.366145] pci 0000:00:1c.4: bridge window [mem 0xfa800000-0xfb1fffff]
[ 0.366150] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.366157] pci 0000:00:1e.0: PCI bridge to [bus 20]
[ 0.366172] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.366174] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.366176] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.366178] pci_bus 0000:00: resource 7 [mem 0xbc000000-0xffffffff]
[ 0.366180] pci_bus 0000:11: resource 0 [io 0x2000-0x2fff]
[ 0.366182] pci_bus 0000:11: resource 1 [mem 0xbc000000-0xbc1fffff]
[ 0.366184] pci_bus 0000:11: resource 2 [mem 0xbc200000-0xbc3fffff 64bit pref]
[ 0.366186] pci_bus 0000:12: resource 0 [io 0x3000-0x3fff]
[ 0.366188] pci_bus 0000:12: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.366190] pci_bus 0000:12: resource 2 [mem 0xbc400000-0xbc5fffff 64bit pref]
[ 0.366192] pci_bus 0000:13: resource 0 [io 0xe000-0xefff]
[ 0.366194] pci_bus 0000:13: resource 1 [mem 0xfb200000-0xfbbfffff]
[ 0.366196] pci_bus 0000:13: resource 2 [mem 0xd0b00000-0xd14fffff 64bit pref]
[ 0.366198] pci_bus 0000:15: resource 0 [io 0xd000-0xdfff]
[ 0.366200] pci_bus 0000:15: resource 1 [mem 0xfa800000-0xfb1fffff]
[ 0.366202] pci_bus 0000:15: resource 2 [mem 0xd0000000-0xd09fffff 64bit pref]
[ 0.366204] pci_bus 0000:20: resource 4 [io 0x0000-0x0cf7]
[ 0.366206] pci_bus 0000:20: resource 5 [io 0x0d00-0xffff]
[ 0.366207] pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.366209] pci_bus 0000:20: resource 7 [mem 0xbc000000-0xffffffff]
[ 0.366212] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
[ 0.366214] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.366254] NET: Registered protocol family 2
[ 0.366468] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.366709] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.366902] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.366941] TCP: reno registered
[ 0.366949] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.366986] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.367076] NET: Registered protocol family 1
[ 0.367090] pci 0000:00:02.0: Boot video device
[ 0.613312] PCI: CLS 64 bytes, default 64
[ 0.613356] Unpacking initramfs...
[ 0.685162] Freeing initrd memory: 3516K (ffff880037912000 - ffff880037c81000)
[ 0.685427] Scanning for low memory corruption every 60 seconds
[ 0.685724] audit: initializing netlink socket (disabled)
[ 0.685739] type=2000 audit(1392735846.573:1): initialized
[ 0.697728] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.698983] zbud: loaded
[ 0.699170] VFS: Disk quotas dquot_6.5.2
[ 0.699211] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.699398] msgmni has been set to 5753
[ 0.699768] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.699834] io scheduler noop registered
[ 0.699836] io scheduler deadline registered
[ 0.699865] io scheduler cfq registered (default)
[ 0.700108] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.700288] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.700460] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.700630] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.700717] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.700804] pciehp: Using ACPI for slot detection.
[ 0.700872] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 1028 ss_did 447
[ 0.700927] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[ 0.700934] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.700978] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.700980] vesafb: scrolling: redraw
[ 0.700982] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.701276] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010800000, using 3072k, total 3072k
[ 0.827851] Console: switching to colour frame buffer device 128x48
[ 0.954320] fb0: VESA VGA frame buffer device
[ 0.954333] intel_idle: MWAIT substates: 0x1120
[ 0.954334] intel_idle: v0.4 model 0x25
[ 0.954336] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.954490] GHES: HEST is not enabled!
[ 0.954559] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.955036] Linux agpgart interface v0.103
[ 0.955109] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2] at 0x60,0x64 irq 1,12
[ 0.983471] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.983499] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.983628] mousedev: PS/2 mouse device common for all mice
[ 0.984635] rtc_cmos 00:02: RTC can wake from S4
[ 0.984795] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.984828] rtc_cmos 00:02: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.984891] drop_monitor: Initializing network drop monitor service
[ 0.984966] TCP: cubic registered
[ 0.985061] NET: Registered protocol family 10
[ 0.985242] NET: Registered protocol family 17
[ 0.985251] Key type dns_resolver registered
[ 0.985582] registered taskstats version 1
[ 0.986258] Magic number: 2:431:83
[ 0.986415] rtc_cmos 00:02: setting system clock to 2014-02-18 15:04:07 UTC (1392735847)
[ 0.986464] PM: Checking hibernation image partition /dev/sda6
[ 1.020768] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.032423] PM: Hibernation image not present or could not be loaded.
[ 1.033852] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 1.033855] Write protecting the kernel read-only data: 8192k
[ 1.036680] Freeing unused kernel memory: 1012K (ffff880001503000 - ffff880001600000)
[ 1.037857] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[ 1.048632] systemd-udevd[58]: starting version 208
[ 1.051934] [drm] Initialized drm 1.1.0 20060810
[ 1.052681] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.052752] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.053489] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.053683] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.054243] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.054250] ACPI: Power Button [PWRB]
[ 1.054309] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.056341] ACPI: Lid Switch [LID0]
[ 1.056390] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 1.056394] ACPI: Sleep Button [SBTN]
[ 1.056449] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 1.056453] ACPI: Power Button [PWRF]
[ 1.061806] [drm] Memory usable by graphics device = 2048M
[ 1.061813] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 1.061816] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.061836] Console: switching to colour dummy device 80x25
[ 1.061989] i915 0000:00:02.0: setting latency timer to 64
[ 1.088158] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.088167] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.088168] [drm] Driver supports precise vblank timestamp query.
[ 1.088247] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.125908] fbcon: inteldrmfb (fb0) is primary device
[ 1.686801] tsc: Refined TSC clocksource calibration: 2261.000 MHz
[ 2.030270] Console: switching to colour frame buffer device 170x48
[ 2.033661] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.033664] i915 0000:00:02.0: registered panic notifier
[ 2.043083] acpi device:2e: registered as cooling_device0
[ 2.043220] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.043321] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input6
[ 2.043365] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.072732] ACPI: bus type USB registered
[ 2.072789] usbcore: registered new interface driver usbfs
[ 2.072800] usbcore: registered new interface driver hub
[ 2.072970] usbcore: registered new device driver usb
[ 2.073041] SCSI subsystem initialized
[ 2.075058] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.075393] ehci-pci: EHCI PCI platform driver
[ 2.075595] libata version 3.00 loaded.
[ 2.075607] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 2.075628] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.075664] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.075687] ehci-pci 0000:00:1a.0: debug port 2
[ 2.079676] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.079703] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbd08000
[ 2.086921] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.087210] hub 1-0:1.0: USB hub found
[ 2.087224] hub 1-0:1.0: 2 ports detected
[ 2.087609] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2.087620] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.087628] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.087646] ehci-pci 0000:00:1d.0: debug port 2
[ 2.091655] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.091677] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbd07000
[ 2.100198] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.100402] hub 2-0:1.0: USB hub found
[ 2.100413] hub 2-0:1.0: 2 ports detected
[ 2.100556] ahci 0000:00:1f.2: version 3.0
[ 2.100724] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 2.100819] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode
[ 2.100823] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 2.100828] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.114500] scsi0 : ahci
[ 2.114680] scsi1 : ahci
[ 2.114837] scsi2 : ahci
[ 2.114999] scsi3 : ahci
[ 2.115160] scsi4 : ahci
[ 2.115327] scsi5 : ahci
[ 2.115387] ata1: SATA max UDMA/133 abar m2048@0xfbd06000 port 0xfbd06100 irq 45
[ 2.115391] ata2: SATA max UDMA/133 abar m2048@0xfbd06000 port 0xfbd06180 irq 45
[ 2.115393] ata3: DUMMY
[ 2.115394] ata4: DUMMY
[ 2.115398] ata5: SATA max UDMA/133 abar m2048@0xfbd06000 port 0xfbd06300 irq 45
[ 2.115399] ata6: DUMMY
[ 2.393678] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.433682] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.433781] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.433831] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.434884] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133
[ 2.434889] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.436127] ata2.00: ATAPI: PLDS DVD+/-RW DS-8A4S, JD12, max UDMA/100
[ 2.436147] ata1.00: configured for UDMA/133
[ 2.436450] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 GG2O PQ: 0 ANSI: 5
[ 2.437560] ata2.00: configured for UDMA/100
[ 2.443701] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DS-8A4S JD12 PQ: 0 ANSI: 5
[ 2.447926] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.447932] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.448029] sd 0:0:0:0: [sda] Write Protect is off
[ 2.448032] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.448096] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.455780] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda pop-up
[ 2.455783] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.455953] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.517726] hub 1-1:1.0: USB hub found
[ 2.517904] hub 1-1:1.0: 6 ports detected
[ 2.539836] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.541577] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.623825] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.687279] Switched to clocksource tsc
[ 2.748052] hub 2-1:1.0: USB hub found
[ 2.748154] hub 2-1:1.0: 8 ports detected
[ 2.827208] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
[ 3.020708] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[ 3.111476] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.114205] usbcore: registered new interface driver usbhid
[ 3.114208] usbhid: USB HID core driver
[ 3.114758] input: SIGMACH1P U+P Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input7
[ 3.114892] hid-generic 0003:1C4F:0003.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACH1P U+P Mouse] on usb-0000:00:1d.0-1.1/input0
[ 3.177353] usb 2-1.6: new full-speed USB device number 4 using ehci-pci
[ 3.263497] hub 2-1.6:1.0: USB hub found
[ 3.263678] hub 2-1.6:1.0: 3 ports detected
[ 3.530764] usb 2-1.6.1: new full-speed USB device number 5 using ehci-pci
[ 3.620086] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input8
[ 3.620222] hid-generic 0003:413C:8161.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1d.0-1.6.1/input0
[ 3.687480] usb 2-1.6.2: new full-speed USB device number 6 using ehci-pci
[ 3.777822] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input9
[ 3.777977] hid-generic 0003:413C:8162.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1d.0-1.6.2/input0
[ 6.791593] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 7.770413] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 7.798237] systemd[1]: Set hostname to <MyDellora>.
[ 8.906388] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 8.906452] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.906465] systemd[1]: Starting Login Prompts.
[ 8.906476] systemd[1]: Reached target Login Prompts.
[ 8.906483] systemd[1]: Starting Remote File Systems.
[ 8.906491] systemd[1]: Reached target Remote File Systems.
[ 8.906499] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 8.906530] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 8.906538] systemd[1]: Starting Delayed Shutdown Socket.
[ 8.906563] systemd[1]: Listening on Delayed Shutdown Socket.
[ 8.906571] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 8.906588] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.906595] systemd[1]: Starting LVM2 metadata daemon socket.
[ 8.906618] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 8.906626] systemd[1]: Starting Encrypted Volumes.
[ 8.906634] systemd[1]: Reached target Encrypted Volumes.
[ 8.906666] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 8.906771] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.906783] systemd[1]: Starting Journal Socket.
[ 8.906825] systemd[1]: Listening on Journal Socket.
[ 8.923805] systemd[1]: Starting Load Kernel Modules...
[ 8.940933] systemd[1]: Starting Apply Kernel Variables...
[ 8.941260] systemd[1]: Starting Setup Virtual Console...
[ 8.941566] systemd[1]: Mounting Debug File System...
[ 8.941964] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.942263] systemd[1]: Mounting Huge Pages File System...
[ 8.942663] systemd[1]: Starting Journal Service...
[ 8.943150] systemd[1]: Started Journal Service.
[ 9.533948] systemd-journald[128]: Vacuuming done, freed 0 bytes
[ 10.753314] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 10.860199] systemd-udevd[161]: starting version 208
[ 10.978562] systemd-journald[128]: Received request to flush runtime journal from PID 1
[ 12.670501] ACPI: Requesting acpi_cpufreq
[ 12.791154] ACPI: AC Adapter [AC] (on-line)
[ 13.046379] ACPI: Battery Slot [BAT0] (battery present)
[ 13.075713] thermal LNXTHERM:00: registered as thermal_zone0
[ 13.075718] ACPI: Thermal Zone [THM] (61 C)
[ 13.109004] wmi: Mapper loaded
[ 13.169313] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 13.267456] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 13.386188] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[ 13.535845] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 13.668535] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 13.668663] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 13.668776] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 13.669369] mei_me 0000:00:16.0: setting latency timer to 64
[ 13.669426] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 13.671461] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.671504] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20130725/utaddress-251)
[ 13.671511] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.671513] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20130725/utaddress-251)
[ 13.671517] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.671519] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPI1 1 (20130725/utaddress-251)
[ 13.671523] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.671524] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 13.671562] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 13.671870] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 13.672007] ACPI Warning: 0x000000000000f000-0x000000000000f01f SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMBI 1 (20130725/utaddress-251)
[ 13.672014] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.726676] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 13.796857] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[ 13.804028] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[ 13.804444] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[ 13.804899] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 13.871967] iTCO_vendor_support: vendor-support=0
[ 13.912022] input: Dell WMI hotkeys as /devices/virtual/input/input16
[ 14.205694] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 14.205738] iTCO_wdt: Found a HM57 TCO device (Version=2, TCOBASE=0x0460)
[ 14.206640] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.234179] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08
[ 14.234212] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0)
[ 14.234237] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0)
[ 14.234286] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0)
[ 14.246839] bcma: bus0: Bus registered
[ 14.434160] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 14.434457] r8169 0000:13:00.0: irq 48 for MSI/MSI-X
[ 14.434659] r8169 0000:13:00.0 eth0: RTL8102e at 0xffffc900212fe000, a4:ba:db:c8:85:03, XID 04e00000 IRQ 48
[ 14.725165] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 581785
[ 14.769986] systemd-udevd[180]: renamed network interface eth0 to enp19s0
[ 14.800096] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 14.878089] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 15.153982] cfg80211: Calling CRDA to update world regulatory domain
[ 15.553384] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[ 15.553458] b43: probe of bcma0:0 failed with error -524
[ 15.553508] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 15.951790] brcmsmac bcma0:0: mfg 4bf core 812 rev 24 class 0 irq 17
[ 15.998636] media: Linux media interface: v0.10
[ 16.075766] Linux video capture interface: v2.00
[ 16.159110] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6461)
[ 16.184262] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 16.184588] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 243
[ 16.229297] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input17
[ 16.229578] usbcore: registered new interface driver uvcvideo
[ 16.229581] USB Video Class driver (1.1.1)
[ 16.373654] systemd-udevd[172]: renamed network interface wlan0 to wlp18s0
[ 18.144304] Adding 2269180k swap on /dev/sda6. Priority:-1 extents:1 across:2269180k FS
[ 86.950402] fuse init (API version 7.22)
[ 277.029449] usb 2-1.2: new high-speed USB device number 7 using ehci-pci
[ 277.467071] NET: Registered protocol family 35
[ 277.472157] usbcore: registered new interface driver cdc_ether
[ 277.476281] usbcore: registered new interface driver cdc_phonet
[ 277.483771] usb 2-1.2: bad CDC descriptors
[ 277.484376] usbcore: registered new interface driver rndis_host
[ 277.496455] cdc_acm 2-1.2:1.4: ttyACM0: USB ACM device
[ 277.498229] usbcore: registered new interface driver cdc_acm
[ 277.498258] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 277.519452] usb 2-1.2: bad CDC descriptors
[ 277.519767] usbcore: registered new interface driver rndis_wlan
[ 288.768279] PPP generic driver version 2.4.2
[ 293.996611] PPP BSD Compression module registered
[ 294.129600] PPP Deflate Compression module registered
here is the critical chain output
systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @15.633s
└─multi-user.target @15.633s
└─dkms.service @11.596s +4.037s
└─basic.target @11.593s
└─timers.target @11.592s
└─systemd-tmpfiles-clean.timer @11.545s
└─sysinit.target @11.543s
└─swap.target @11.494s
└─dev-disk-by\x2duuid-6ff023ec\x2d720b\x2d4c7a\x2d87ff\x2ddf5224b2
└─system.slice @2.016s
└─-.slice @2.015s
lines 1-14/14 (END)...skipping...
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @15.633s
└─multi-user.target @15.633s
└─dkms.service @11.596s +4.037s
└─basic.target @11.593s
└─timers.target @11.592s
└─systemd-tmpfiles-clean.timer @11.545s
└─sysinit.target @11.543s
└─swap.target @11.494s
└─dev-disk-by\x2duuid-6ff023ec\x2d720b\x2d4c7a\x2d87ff\x2ddf5224b293c3.swap @10.524s +41ms
└─system.slice @2.016s
└─-.slice @2.015s
Last edited by Dinesh raja (2014-02-18 14:06:46) -
I am having similar problem on my Dell Inspiron N5010 running Windows 7. I tried downloading driver suggested ( Dell wireless 365 bluetooth
driver) successfully. Still does not work. I did not update BIOS because I was afraid of territory I'm not too familiar with.
My problem: Have a bluetooth printer and have been sending to for over a year with no problems. (think I may have picked up some malware along the way) Was going to pair my phone, clicked on bluetooth icon in my tray. Icon disappeared
from tray and all evidence of bluetooth is gone and I can no longer send print files to printer. (I checked printer by sending file from phone successfully using bluetooth)
What can I do to get my bluetooth visible again?Hi,
Firstly please uninstall all bluetooth printer driver from PC.
After that check to enable the bluetooth on the computer and the printer, then add the printer to your bluetooth network as below:
Connect to Bluetooth and other wireless or network devices
http://windows.microsoft.com/en-in/windows7/connect-to-bluetooth-and-other-wireless-or-network-devices
In addition, Which model printer did you use?
If it is HP product, this guide might be helpful:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02530249
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support -
(Win8.1 Pro) Blue Screen of Death: IRQL_NOT_LESS_OR_EQUAL
I'm getting intermittent BSODs, usually with the message "IRQL_NOT_LESS_OR_EQUAL". It doesn't appear to be tied to a specific activity - sometimes it will happen when I'm not at the computer. I tried doing a Memory Diagnostic test and it found
no errors. As per one of the suggestions on the forum here, I tried running the Driver Verifier process, but then it couldn't boot into Windows at all (had to go in in safe mode and reset the verifier). A couple of weeks ago, I had a few BSODs with the message
"DPC_WATCHDOG_VIOLATION" though that appears not to have happened for a while.
Any help would be appreciated - I'm sort of out of my depth here. DMP and Sysinfo Link below..
https://www.dropbox.com/sh/cajd7ozeb7zxzez/Gs76gj28z2
System: Windows 8.1 Pro
Computer: DELL INSPIRON N5010 / Processor: Intel Core i5 / Memory: 8GB / System Type: 64-bit
Cheers,
CHi,
We have a ton of crash dumps here, and I went through what I can.
MEMORY_MANAGEMENT (1a)
This indicates that a severe memory management error occurred.
BugCheck 1A, {41287, 61d00125f640, 0, 0}
The 1st parameter of the bug check is 41287 which indicates an illegal page fault occurred while holding working set synchronization.
DPC_WATCHDOG_VIOLATION (133)
This bug check indicates that the DPC watchdog executed, either because it detected a single long-running deferred procedure call (DPC), or because the system spent a prolonged time at an interrupt request level (IRQL) of DISPATCH_LEVEL or above.
I need a kernel-dump to debug this type of bug check.
IRQL_NOT_LESS_OR_EQUAL (a)
This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This bug check is issued if paged memory (or invalid memory) is accessed when the IRQL is too high. The error that generates this bug check usually occurs after the installation of a faulty device driver, system service, or BIOS.
2: kd> k
Child-SP RetAddr Call Site
ffffd000`22e8d338 fffff801`dbbd57e9 nt!KeBugCheckEx
ffffd000`22e8d340 fffff801`dbbd403a nt!KiBugCheckDispatch+0x69
ffffd000`22e8d480 fffff801`dbb62e71 nt!KiPageFault+0x23a
ffffd000`22e8d610 fffff801`dbab0452 nt!MiReplenishPageSlist+0x139
ffffd000`22e8d680 fffff801`dbaad342 nt!MiRemoveAnyPage+0x202
ffffd000`22e8d740 fffff801`dbaa9f07 nt!MiGetPage+0x3f2
ffffd000`22e8d810 fffff801`dbaaf762 nt!MiResolveMappedFileFault+0x3b7
ffffd000`22e8d930 fffff801`dbaae4fb nt!MiResolveProtoPteFault+0x642
ffffd000`22e8d9d0 fffff801`dbab8124 nt!MiDispatchFault+0x9ab
ffffd000`22e8db00 fffff801`dbbd3f2f nt!MmAccessFault+0x364
ffffd000`22e8dc40 00007ffc`cae945cd nt!KiPageFault+0x12f
0000009e`cc89be60 00000000`00000000 0x00007ffc`cae945cd
nt!MiReplenishPageSlist calls a pagefault, and prior to this we have various memory related routines as well.
This looks like faulty RAM to me, so please go ahead and start by running Memtest for NO LESS than ~8 passes (several hours):
Memtest86+:
Download Memtest86+ here:
http://www.memtest.org/
Which should I download?
You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary
files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).
Do note that some older generation motherboards do not support USB-based booting, therefore your only option is CD (or Floppy if you really wanted to).
How Memtest works:
Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.
The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because
of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.
Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance
is error-free with these faster settings.
Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.
This information, if available to the program, can be displayed via a menu option.
Any other questions, they can most likely be answered by reading this great guide here:
http://forum.canardpc.com/threads/28864-FAQ-please-read-before-posting
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama -
Unable to use ATI radeon on linux 3.13
Dell Inspiron N5010 laptop
$ lspci -k | grep -A3 VGA
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV730/M96 [Mobility Radeon HD 4650/5165]
Subsystem: Dell Device 0447
Kernel driver in use: fglrx_pci
Kernel modules: radeon, fglrx
Booting using the 2014.03.01 installer (has the 3.13.5 kernel) completely hangs up my system after some initial loading. I can only boot by setting the nomodeset parameter. After installing xorg and ati drivers and rebooting, I either get a black screen, or the following errors.
Mar 10 14:21:17 sdh-archlinux kernel: [drm] Initialized drm 1.1.0 20060810
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon kernel modesetting enabled.
Mar 10 14:21:18 sdh-archlinux kernel: fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Mar 10 14:21:18 sdh-archlinux kernel: [drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x1028:0x0447).
Mar 10 14:21:18 sdh-archlinux kernel: [drm] register mmio base: 0xFBE20000
Mar 10 14:21:18 sdh-archlinux kernel: [drm] register mmio size: 65536
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Detected VRAM RAM=1024M, BAR=256M
Mar 10 14:21:18 sdh-archlinux kernel: [drm] RAM width 128bits DDR
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon: 1024M of VRAM memory ready
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon: 1024M of GTT memory ready.
Mar 10 14:21:18 sdh-archlinux kernel: [drm] GART: num cpu pages 262144, num gpu pages 262144
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Loading RV730 Microcode
Mar 10 14:21:18 sdh-archlinux kernel: [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Mar 10 14:21:18 sdh-archlinux kernel: [drm] Driver supports precise vblank timestamp query.
Mar 10 14:21:18 sdh-archlinux kernel: [drm] radeon: irq initialized.
Mar 10 14:21:18 sdh-archlinux kernel: [drm] ring test on 0 succeeded in 1 usecs
Mar 10 14:21:18 sdh-archlinux kernel: [drm] ring test on 3 succeeded in 1 usecs
Mar 10 14:21:19 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:20 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:21 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:22 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:23 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:24 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:25 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:26 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:27 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:28 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Mar 10 14:21:28 sdh-archlinux kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, giving up!!!
Mar 10 14:21:28 sdh-archlinux kernel: [drm:rv770_startup] *ERROR* radeon: failed initializing UVD (-1).
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Enabling audio 0 support
Mar 10 14:21:28 sdh-archlinux kernel: [drm] ib test on ring 0 succeeded in 0 usecs
Mar 10 14:21:28 sdh-archlinux kernel: [drm] ib test on ring 3 succeeded in 0 usecs
Mar 10 14:21:28 sdh-archlinux kernel: [drm] radeon atom DIG backlight initialized
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Radeon Display Connectors
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Connector 0:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] VGA-1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Encoders:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] CRT1: INTERNAL_KLDSCP_DAC1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Connector 1:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] HDMI-A-1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] HPD1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Encoders:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DFP1: INTERNAL_UNIPHY
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Connector 2:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] LVDS-1
Mar 10 14:21:28 sdh-archlinux kernel: [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Encoders:
Mar 10 14:21:28 sdh-archlinux kernel: [drm] LCD1: INTERNAL_UNIPHY2
Mar 10 14:21:28 sdh-archlinux kernel: [drm] Internal thermal controller with fan control
Mar 10 14:21:28 sdh-archlinux kernel: [drm] radeon: dpm initialized
Mar 10 14:21:29 sdh-archlinux kernel: [drm] fb mappable at 0xC045E000
Mar 10 14:21:29 sdh-archlinux kernel: [drm] vram apper at 0xC0000000
Mar 10 14:21:29 sdh-archlinux kernel: [drm] size 4325376
Mar 10 14:21:29 sdh-archlinux kernel: [drm] fb depth is 24
Mar 10 14:21:29 sdh-archlinux kernel: [drm] pitch is 5632
Mar 10 14:21:29 sdh-archlinux kernel: fbcon: radeondrmfb (fb0) is primary device
Mar 10 14:21:29 sdh-archlinux kernel: [drm:rv770_dpm_set_power_state] *ERROR* rv770_restrict_performance_levels_before_switch failed
Mar 10 14:21:29 sdh-archlinux kernel: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
Mar 10 14:21:29 sdh-archlinux kernel: [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
I am currently using the legacy catalyst drivers + Xorg 1.12. It works, but it has its own set of issues (eg. screenshots not working on KDE)
Is there a easy fix for this so that I can use the open source drivers for my old ATI card or is it a kernel bug and needs to be reported upstream?Hi,
Although I'm a Ubuntu user, not Arch Linux's, but I had the same issue.
Passing radeon.dpm=0 solved the issue (as workaround).
Thank you so much for great information.
# radeon.runpm=0 doesn't solve the issue. Yeah, I firstly thought that this issue was related with acpi; I really had to use acpi=off.
[Edit]
My machine is AMD A8-6500 + MSI A78M-E35.
Without radeon.dpm=0, my machine reboots suddenly rather than blackout.
I have big difficulty of debugging.
Last edited by cielavenir (2014-04-24 03:09:01) -
Time Capsule Not Recognized by PC
I've replaced my old router with a new Time Capsule (TC). The router is connected to a Motorola SB6120 cable modem for internet access via my cable TV company. Set up of the TC seemed to go smoothly, the network still has the same SSID and WEP security code as it did before, picked up automagically from the old router during the set up. My wireless devices are a Macbook Pro (that I used to do the setup), an iMac, an iPad2, two iPhone4s (plural iPhones, not to be confused with the new iPhone4S), an HP Photosmart Premium All-in-One printer, and the problem - a Dell Inspiron N5010 PC running Windows 7 Home Premium SP1.
After completing the set up I had to re-enter the WEP security code on each Apple device and the printer when they first tried to connect to the network, even though the code had not changed, but other than that one-time minor inconvenience they all connect fine.*
The problem is with the Dell PC. It can 'see' the network - the SSID shows in the list of available networks - and it sees excellent signal strength, but it connects with only "Limited Access". Neither disconnecting from the network and reconnecting, nor disabling and re-enabling the network card, changes that. Initially, running the Network Troubleshooting routine produced the following result:
- The 1st (and only) stopping point was a request to confirm the WEP security code. The code shown was correct, but I re-entered it and continued.
- The troubleshooting routine then went through a series of other checks without stopping for user input or confirmation.
- The troubleshooting routine ended by showing 2 Problems Found:
1) the security code confirmation
2) 'IP problem' (not the exact wording, but something about an IP address problem).
After doing some research on the internet, I downloaded and installed Airport Utility on the Dell PC and tried to run it. On launching Airport Utility I got this message on the screen, "Unable to find any Airport wireless device".
Again I tried to run the Windows Network Troubleshooting routine. Again the 1st item is to confirm the WEP security code after which the routine runs to completion without stopping. Now there are 2 different problems found:
1) Problem with wireless adapter of access point - Detected - triangle with ! inside
2) Windows cannot connect to [SSID network name] - Fixed - circle with checkmark inside
Any suggestions for what might be going on? What hardware or settings I ought to check and report back on?
Thanks in advance for and suggestions anyone can offer.
* Aside: my iMac shows that the network security type is WPA2, not WEP, but it connects just fine anyway!Thanks again for your suggestions and instructions, now wish me luck!
Yes, I do!!
Never mind - Google is my friend!
Sure is.
2. how do I determine which of the two networks to use?
Easy.. pick the best one. ie best signal strength and speed. 5ghz is better speed and poor range. 2.4ghz the opposite. At any point pick the best. Best signal / speed. Close to the router, it will be 5ghz.. further away 2.4ghz will be better. Try both.. it is a 10sec effort.
The reason to do this manually is the TC is designed to swap channels automatically when there is interference.. It is also so the client on the computer (mac only) will auto swap between 2.4ghz and 5ghz for whichever is faster. So you have auto channels on top of auto band.. and even the Mac gets confused .. the PC has no idea.
3. What channel should I set for the 5 ghz network? (If I recall correctly, the TC is presently using channel 6 - does that apply to both networks?)
No.. 2.4ghz uses channels 1-11 in USA.. 1-13 in Europe Australia..
There are 3 non-overlapping channels, 1, 6, 11.. pick one and try it. Better still on the PC download the application inssider.. and you will see which channels are in use.. usually all of them if you live in a city in USA or moderately weathly country. Pick the channel with the lowest signal and use that. Since only those three channels are non-overlapping picking channel 9 for instance because nobody is using it, is pointless. Wireless on both channel 6 and channel 11 will then interfere with it. Use the lowest signal channel, out of the three, 1, 6, 11. (13 in Europe 14 in Japan).
5ghz has a large range of channels, beginning from 36 up to 151 (at least in Australia) .. your country if different will vary. Use the lower channels if possible.. but there is not much interference yet on 5ghz. Usually you can just use 40 which meets lower end equipment. eg early versions of the AEBS and TC do not offer a large range of channels.
4. Can I leave the security as WEP until I get everything working? I understand that WPA2 is better
WEP is equal to a strong door on a tent.. it is next to useless. It keeps out people who are not trying to get in. And offers 1min of difficulty to the guy with the knife. Use no security to do setup.. then use WPA2.. if something doesn't work with wpa2 you can use wpa at a pinch. Throw away any item not compliant with at least WPA. WEP is not a rated security for N wireless.. it could well not work or fall back to G wireless. So for testing just turn off security.. when it is working jump straight to wpa2.
5. Why turn on the Guest account? I don't see that it's used in the subsequent steps.
If you ever want to write to or read the hard disk from PC.. you will have issues with security on Windows not matching the TC.. You do not need to use guest account (this is hard disk access not wireless btw).. if you never want to use hard disk. I added it for completeness. You can also fight your way through the difference in security between a Mac and a PC with win7 in particular.. loads of fun. If the disk is going to be on a private network and the TC has to be really, then use guest network. If anyone wants to break in it is no more difficult than holding down the reset for 1sec and it will reset all the passwords. So what more security do you need. Guest is fine.
6. Will do. I do have a workgroup specified on the 3 computers, but it's one that I created and it's not named <WORKGROUP>
SMB uses workgroup name.. what name you use is irrelevant.. again this is for hard disk access. If you just want internet it is not necessary to worry about. Put into the workgroup name the name of YOUR workgroup. But it makes it appear in the windows networking as a network drive and that can be helpful.
Somewhere on the Dell PC I've seen that both ipv6 and ipv4 show as not used, don't recall where I saw it though, and there did not appear to be any way to change it.
You have internet connection it MUST use TCP/IP which has to be either ipv4 or ipv6 or both. That is how the internet works.. you cannot have neither. You change the settings in TCP/IP properties box associated with the wireless card.. go to device manager and the wireless device. Click on it and go to properties.. see TCP/IP and go the advanced.
You need to learn to use the networking tools.
The key tool is ping.. that allows you to see if a device is available and responding on the network.
Command window is same as terminal on the Mac.. (well near enough). You do low level commands.. both will do ping.
You can also get all the settings in the network.
Simple one is ipconfig in windows.. ifconfig in the mac.. that will show the IP address of all the network clients. In windows there is a full description if you do ipconfig /all
These commands are very important to use and learn about. -
I have Acrobat 7.0 Professional loaded on Windows 7; No Printer & error msgs
I have Adobe Acrobate 7.0 Professional, loaded onto a new Dell Inspiron N5010 clone where I have Windows 7. I installed the Acrobat successfully, but the virtual printer does not show up as an available printer in my Devices & Printers. Also when I click on the desktop icon for Adobe Acrobat 7.0 Professional, I get these error messages: There was an error while loading the plug-in 'Accessibility.api'. The plug-in failed to initialize. Then when I click on the OK button, I get another pop-up window saying: There was an error while loading the plug-in 'AcroForm.api'. The plug-in failed to initialize. Then when I click on the OK button, I get a final pop-up window saying: There was an error while loading the plug-in Annots.api. The plug-in failed to initialize. Anybody ever get this set of issues???, and if so....Help! I would be ever so grateful. I am worried that Adobe Acrobat 7.0 Professional is incompatible with Windows 7. I know that if so, it might mean I need to buy 9.0. Can I just upgrade? Is that less costly? Many thanks to anyone who can offer some advice. ---DMN
Further to this original post --- OK, I uninstalled and then reinstalled the program, to no avail. I did however get a message which I had gotten before but since I was not yet aware that the program got installed with any problems, I had not noticed... This time I took notice. The error message was clearly what it is about, at least to a great extent. I got this message: Warning 20225: Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Port Printer may be unavailable. GetLastError: The operation completed successfully. So then after the reinstallation, I went into Control Panel, Printers & Drivers and made a valiant attempt to manually install a virtual printer port. I have Adobe Acrobat 7.0 Professional installed in another computer on which I have Windows XP Pro (yes the only other computer-- I am permitted two installations for this program-- I confirmed this with Adobe), by looking at Properties and copying down exactly the text, etc. which described the names of the two possible ports, etc. Tried to "tell" my new computer (the one which has Windows 7) that it should set up and/or look for such a virtual port, again to no avail. I am amazed that Adobe does not allow me to even pay cash money for tech support, but they wouldn't do it. I guess you can have just so many employees who know the programs, etc. Anyway, as I said before I may just break down and buy the 9.0 version which the Adobe techie told me is indeed compatable with Windows 7. He did not tell me that Windows 7 was incompatible with Adobe Acrobat 7.0 Professional but that 8.0 is indeed incompatible. Just googled the term "Warning 20225" along with some relevant buzz words. I can see there is still a bit of tweaking I may be able to do before I cry "uncle!"
-
Hi everyone.............
could you plz help me to install Arch linux in my laptop........
my system is: Dell Inspiron N5010
64 bit .........Intel i5 core processor
I downloaded archlinux-2010.05-core-x86_64.iso.
and I am trying install from USB stick.......
Last edited by ashvin (2010-10-22 09:33:30)Please don't cross post http://wiki.archlinux.org/index.php/For … ss-Posting
More information in your second thread https://bbs.archlinux.org/viewtopic.php?id=107058
Closing -
RV220W 1.0.2.4: Time incorrect after reboot
When a reboot is performed, the router is falling back to a previous time setting.
Probably the latest one set manually, when time is to be set manually and not
by a NTP server
Aug 28 22:35:39 618579721 KERNEL [Kernel] Dead loop on virtual device sit0, fix it urgently!
Aug 15 21:40:47 618579721 KERNEL [Kernel] Linux version 2.6.21.7-Cavium-Octeon (root@revanth-Inspiron-N5010) (gcc version 4.1.2 (Cav
ium Networks Version: 1_6_0, build 34)) #1 Fri Jul 15 22:06:04 IST 2011
Power had not been turned off.Why is this bad ?
After a power outage or deliberate power cycling the unit, the IPv6 network is not working.
What does this mean for Cisco? No sale.
I do not replace our current branch office router with this unit yet.
When managing the site remotely it has been invaluable, that the current router has been able to provide access through IPv6 when there was certain problems with IPv4.
The issue has been reproduced. -
ATI With catalyst ... overheat problem
hi guys
(iam sory for my english )
iam serach and search ... and read in the wiki .. but dont find perfect solution
my laptop is Dell Inspiron N5010
> lspci :
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Manhattan [Mobility Radeon HD 5400 Series]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]
12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
13:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
after installing arch i have a problem with temperature (70>80>87> then my laptop is going sleep :-/ )
i install the amd driver catalyst (close source),powertop, powerdown,laptop-mode-tools
and it ok .. the temp nearly 50 (with firefox is run), but with little additional work its starting over (50>60>70)
device stats (from powertop) :
Usage Device name
17.5% CPU use
100.0% Display backlight
100.0% PCI Device: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
100.0% Radio device: btusb
100.0% PCI Device: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller
100.0% USB device: EHCI Host Controller
100.0% PCI Device: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller
100.0% PCI Device: Advanced Micro Devices [AMD] nee ATI Manhattan [Mobility Radeon HD 5400 Series]
100.0% PCI Device: Intel Corporation Core Processor PCI Express x16 Root Port
100.0% PCI Device: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller
100.0% PCI Device: Intel Corporation 5 Series/3400 Series Chipset HECI Controller
100.0% USB device: Usb Mouse (SIGMACHIP)
100.0% USB device: BCM2046B1 (Broadcom)
100.0% PCI Device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio
100.0% Radio device: brcmsmac
100.0% PCI Device: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller
100.0% PCI Device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]
100.0% PCI Device: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller
100.0% USB device: usb-device-413c-8161
100.0% USB device: EHCI Host Controller
100.0% USB device: Intel built in USB hub
100.0% PCI Device: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3
100.0% USB device: Intel built in USB hub
100.0% PCI Device: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2
18.6 pkts/s Network interface: wlan0 (brcmsmac)
0.0 pkts/s Network interface: eth0 (r8169)
0.0% USB device: usb-device-413c-8162
0.0% PCI Device: Intel Corporation Core Processor QPI Link 0
0.0% PCI Device: Intel Corporation Core Processor QPI Physical 0
overview:
Usage Events/s Category Description
56.2 ms/s 223.9 Process /usr/lib/firefox/firefox
1.3 ms/s 107.3 Timer hrtimer_wakeup
78.2 ms/s 53.2 Process /usr/bin/gnome-shell
1.9 ms/s 71.6 Interrupt [50] fglrx[0]@PCI:1:0:0
3.6 ms/s 57.4 Process /usr/lib/firefox/plugin-container /usr/lib/mozilla/plugins/libflashplayer.so -greomni /usr/lib/
1.1 ms/s 38.5 Interrupt [7] sched(softirq)
33.1 ms/s 16.4 Process /usr/bin/X :0 vt07 -nolisten tcp
0.7 ms/s 16.4 Process gnome-mplayer /run/media/tareef-m/6905f43a-da9d-4502-9bc2-2ce901ff7b83/مكتبتي الشخصية/تسجيلات ص
0.9 ms/s 15.7 Interrupt [16] ehci_hcd:usb1
616.4 µs/s 14.9 Timer tick_sched_timer
463.3 µs/s 9.0 Interrupt [6] tasklet(softirq)
114.9 µs/s 9.0 kWork ieee80211_iface_work
323.2 µs/s 6.8 Process gnome-mplayer /run/media/tareef-m/6905f43a-da9d-4502-9bc2-2ce901ff7b83/مكتبتي الشخصية/تسجيلات ص
89.4 µs/s 6.5 Process /usr/sbin/haveged -w 1024 -v 1
218.7 µs/s 4.5 Process /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
2.1 ms/s 3.7 Process gnome-terminal
31.8 µs/s 1.4 Process mono /usr/lib/gnome-do/Do.exe
2.1 ms/s 0.6 Process gnome-shell
8.5 µs/s 1.0 kWork pci_pme_list_scan
83.9 µs/s 0.9 kWork _brcms_timer
0.9 ms/s 0.5 Process powertop
36.2 µs/s 0.8 Process [rcu_preempt]
31.2 µs/s 0.8 Interrupt [4] block(softirq)
2.6 µs/s 0.7 kWork console_callback
29.3 µs/s 0.7 Interrupt [1] i8042
6.5 µs/s 0.7 kWork flush_to_ldisc
0.0 µs/s 0.5 kWork disk_events_workfn
1.5 µs/s 0.4 kWork mei_timer
this problem did with all distro (Debian,Fedora,Ubuntu)...
THANKS for Help (in Arabic شكرًا لكم)here....
2. Profile-based frequency switching
# echo profile > /sys/class/drm/card0/device/power_method
The "profile" mode will allow you to select one of the five profiles below. Different profiles, for the most part, end up changing the frequency/voltage of the card.
"default" uses the default clocks and does not change the power state. This is the default behavior.
"auto" selects between "mid" and "high" power states based on the whether the system is on battery power or not. The "low" power state are selected when the monitors are in the dpms off state.
"low" forces the gpu to be in the low power state all the time. Note that "low" can cause display problems on some laptops; this is why auto only uses "low" when displays are off.
"mid" forces the gpu to be in the "mid" power state all the time. The "low" power state is selected when the monitors are in the dpms off state.
"high" forces the gpu to be in the "high" power state all the time. The "low" power state is selected when the monitors are in the dpms off state.
So lets say we want the "low" option...for this, run the following command:
# echo low > /sys/class/drm/card0/device/power_profile
the last command "echo low > /sys/class/drm/card0/device/power_profile
reduces a lot the temperature of both my hd5670. The screens flashes sometimes, but..... downs very well the temperature. With the proprietary driver I haven't do it. -
Itunes (10.4.1.10) Converting to 128kbps Sync Bug
Itunes (10.4.1.10) [Updated/Repired yesterday(9/09/2011)] crashes evertime I try to sync my iPhone (4.3.5 Build 8L1) and/or iPod Classic (1.1.2) using the 'Convert higher bit rate songs to 128kbps ACC' check box function... I wish I had more info But 'It does exactly what is says on the tin'...
I have:
Restored my divices
Repired iTunes
enclosed a diagnostic Report - I hope it helps
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Inspiron N5010
iTunes 10.4.1.10
QuickTime 7.7
FairPlay 1.12.20
Apple Application Support 2.0.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.3.0
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 0042B1F8035C7C60
Current user is an administrator.
The current local date and time is 2011-09-20 02:42:22.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., ATI Mobility Radeon HD 5400 Series
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 10.4.1.10 (x64) is currently running.
iTunesHelper 10.4.1.10 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
STEPHEN'S I (E:\), iPod classic running firmware version 1.1.2
Serial Number: 8K8226XJYMX
Bus Speed: 61440
Stephen’s iPhone, iPhone 4 (GSM) running firmware version 4.3.5
Serial Number: 5K051UJDA4S
**** Device Sync Tests ****
Sync tests completed successfully.You can try restarting or resetting your phone.
Restart your phone: Press and hold the Sleep/Wake button for a few seconds until a red slider appears, and then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
If that doesn't work, reset your phone: Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears. -
I have installed; fixed; uninstalled and reinstalled Lightroom 5 student version several times. Then I uninstalled it, deleted all files, and downloaded and installed the trial version. The downloads and installs seem to go fine with no errors, but every time I try to open the program, I get a box titled "lightroom.exe - Application Error" with the description "The application was unable to start correctly (0xc 0000 07b). Click OK to close the application." I'm running Windows 7 Home Premium with Service Pack 1. I've rebooted my computer several times and tried closing all other programs. I always get the same error. I have CS5 installed on this computer and it runs fine.
Since your response is neither an answer nor a question, I'm assuming you want more information. I don't know how much you need. This is the System Summary of the System Information screen:
OS Name
Microsoft Windows 7 Home Premium
Version
6.1.7601 Service Pack 1 Build 7601
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
ALLISON-PC
System Manufacturer
Dell Inc.
System Model
Inspiron N5010
System Type
x64-based PC
Processor
Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz, 2261 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A04, 5/10/2010
SMBIOS Version
2.6
Windows Directory
C:\windows
System Directory
C:\windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7601.17514"
User Name
Allison-PC\Allison
Time Zone
Eastern Daylight Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.80 GB
Available Physical Memory
1.73 GB
Total Virtual Memory
7.60 GB
Available Virtual Memory
5.22 GB
Page File Space
3.80 GB
Page File
C:\pagefile.sys
What exactly am I looking for in the event files?
Maybe you are looking for
-
"Itunes has detected an iPod that appears to be corrupted" - Ipod Classic
I recently noticed little tiny jumps or skips appearing in songs on my 80GB ipod classic, so decided to restore it. Having done this I got the following message: "Itunes has detected an iPod that appears to be corrupted. You may need to restore this
-
7410 All in one printer problems with working all of a sudden.
My printer seems to have disappeared from my printer list. I have removed the software and re-installed, it sees the printer but nothing shows up in the printer list like it used to. I have set it on a static IP on a wired network. I started running
-
We are using WebLogic 7.0 SP4 on Solaris 8 w/ jdk131_10. By default we don't specify the "encoding" jsp-param of the jsp-descriptor in the weblogic.xml. The BEA documentation says "If not set, this parameter defaults to
-
Create Accounts Payable Invoice in Oracle Applications through BPEL
We are trying to create Invoice in Oracel Application R 12.04. The following are the steps we followed. Facts of the case: 1. Define services in BPEL- Parameters, Assign and Invoke E business Suite and Call back and other required things all are defi
-
I'm new to dreamweaver and I designed my website, scottbraman.com, using layers in with dreamweaver mx. I use the hide and show behavior for thumbnail triggers, and rollovers. The nav bar across the top works intermittently with IE 7 on a pc, on my m