INST-07286 Error Message

hi every body
iam installing Oracle Fusion Middleware 11g Forms & Reports 11gR2 now iam stuck with steps 5 of 15
here is the error message:
INST-07286: specific Oracle Middleware homw location does not have version 10.3.5.0 of weblogic server.
what should i do now can anyone Help ASAP ...
regards
venugopal

Hi Venu,
Try to re install with new Middelware Home it will solve the problem.
Regards,
Kal

Similar Messages

OIM 11g install error INST-07286 mw_home has wrong version weblogic

Hi gurus,
I have been trying to install OIM 11g from past few days
1. I have installed Oracle 10.2.0.5
2.I installed weblogic 10.3.3 by downloading from Oracle website , wls1033_dev.zip
3.I ran Rcu utlity 11.1.1.3.3
4. I installed SOA 11.1.1.2.0.
I am trying to upgrade soa to 11.1.1.3.0 using ofm_soa_generic_11.1.1.3.0_disk1_1of1.zip
It gives me error
INST-07286 Specified Oracle Middle ware home does not contain weblogic version 10.3.3 , upgrade to crrect version and then retry
It does not let me further.
Can some one please help /advise ?
Thanks,
Pandu

Hi Gurus,
I think I found the answer.
I downloaded wrong version of weblogic
I had linux 32 , and wanted weblogic 10.3.3, So I went here ( row 3 , column 2)
http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html
file name = wls1033_dev.zip
well I was wrong it was not 10.3.3 or something was wrong. SOA installer did not recognise it as 10.3.3.
Who is to blame. I wasted 3 days I hope Oracle keeps right versions in its website for download.
I got the right one from edelievry
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11493750
and download =
Download Oracle WebLogic Server 11gR1 (10.3.3) for Linux x86 V21014-01 703M
Hope this helps some one.
Thanks!

OWLCS -error INST 07286 oracle home

I am following oracle middleware guide for oracle weblogic communiaction service 11g
I have done rcu and stepup steps for oracle weblogic and sip servlet
tell step 3
but in step 4 it is giving error as not taking oracle home
INST 07286 :specify oracle middleware home location is not a weblogic communication service location
plz help..

It is unable to make directory in my middleware home
Error :
Specified oracle middleware home is not oracle home for oracle communication services

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the inst

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.

Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.

HT203687 Trying to install iCloud on a new Toshiba laptop so I can sync with my iPad and iPhone. I get error message HRRESULT:OX8007OBC9, says the installer encountered errors before iCloud Control Panel 2.0 could be installed. Same problem trying to inst

Trying to instll iCloud on a new Toshiba laptop so I can sync contacts, calendars, email with my iPhone and iPad. Get error message HRRESULT:OX8007OBC9, says installer encountered errors before iCloud Control Panel 2.0 could be configured. Have the same problem trying to istall iTunes.

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

Converting Error message to warning.

Hi. I need to convert an error message that exist in SAP 4.7 to a warning message. I am doing this for IT 2001 (absences). Does anybody know where I can find the config for the error messages? Thanks.
Evie

Hi
U can do this in table V_T554S by selecting in absence inputcheck screen. Different F4 values are provided in different options just select W insted of E.
Reward me if useful
Thanks
Sheetal

INST-08010: Error in validating the port range for auto port allocation

Hello guys, I am using the installer to install OBIEE 11.1.7.0 on my machine. When I get to step 6, I receive the error messages below:
INST-08010: Error in validating the port range for auto port allocation. At least 2 ports should be free within the range 7000-7500 for the Adminserver and Adminserver SSL.
Ensure that a minimum of 2 ports are free within the range 7000-7500 for auto port allocation to work correctly for the Adminserver and Adminserver SSL.
INST-08010: Error in validating the port range for auto port allocation. At least 3 ports should be free within the range 9500-9699 for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 ports are free within the range 9500-9699 for auto port allocation to work correctly for the Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
INST-08012: Error in validating the port range for auto port allocation. At least 3 consecutive ports should be free within the range 9500-9699 for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
Ensure that a minimum of 3 consecutive ports are free within the range 9500-9699 for auto port allocation to work correctly for the OPMN, in addition to 3 free ports required for Weblogic Components for BI (WLS Managed Server, Managed Server SSL and NodeManager).
My Operating System below:
Linux Red Hat 5.9 X86 64bit
My uname -a are below:
Linux redhat59 2.6.18-348.el5 #1 SMP Wed Nov 28 21:22:00 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
My /etc/hosts file are below:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1   localhost.localdomain localhost
10.10.80.19 redhat59
My /etc/sysconfig/network are below:
NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=redhat59
GATEWAY=10.174.27.228
My /etc/sysconfig/iptables are below:
# Generated by iptables-save v1.3.5 on Tue Dec 3 17:01:17 2013
*filter
:INPUT ACCEPT [425:33860]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [307:40164]
COMMIT
# Completed on Tue Dec 3 17:01:17 2013
My ifconfig are below:
eth0      Link encap:Ethernet HWaddr 52:54:00:55:9B:C9
          inet addr:10.174.27.233 Bcast:10.174.27.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:200216 errors:0 dropped:0 overruns:0 frame:0
          TX packets:95849 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:110668992 (105.5 MiB) TX bytes:209784134 (200.0 MiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:109200 errors:0 dropped:0 overruns:0 frame:0
          TX packets:109200 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:257845896 (245.9 MiB) TX bytes:257845896 (245.9 MiB)
my /etc/sysconfig/network-scripts/ifcfg-eth0 are below:
# Virtio Network Device
DEVICE=eth0
BOOTPROTO=static
BROADCAST=10.174.27.255
HWADDR=52:54:00:55:9B:C9
IPADDR=10.174.27.233
NETMASK=255.255.255.0
NETWORK=10.174.27.0
ONBOOT=yes
Have any suggestion please?
Many Thanks
D

In setDomainEnv.sh set debugFlag=false or you can just remove it.
NodeManager is a charm after that. it can take any number of ports.
Cheers !!

Error Messages popup in editable ALV

Hello All,
Iam working on Editable ALV as a table maintainance for a Ztable and usng OOPs for that.
Lets say i have material and plant fields for editing in ALV.
If the user enters some junk value in the material field, its automatically getting validated and giving an error message with a popup.
my question is, is there any way we can restrict this popup messages with error and have our own messages insted ?
Appriciate your help in this.
Thanks.

check out this thread, where the poster wanted to append custom messages to the standard SAP messages... check otu the refresh_protocol method to see if you can clear out pre-existing SAP messages...
Re: editable alv: add custom validation and display "errors" in protocol li

Error message CoreAudio: Invalid input setting (-10021)

I was recording a guitar part (thru an M-Audio MobilePre) in the 24 track template (all audio tracks) on track 2, and there was a keyboard part already recorded in track 1. I tried to arm track 3 to do a second guitar part, and I got this error message. Suddenly, none of the other tracks will work -- only 1 and 2. If I open a new file using that template, it now gives me only tracks 1 and 2 to use, while all the other tracks have the same error message. If I open a Basic Setup, however, with audio, inst, and MIDI tracks preset, all the tracks will arm just fine. How do I fix this so I can use the 24 track template again -- it was working just fine! In fact, I reloaded the whole program hoping that might help, but no. Also, if I stay in the Basic Setup and create another track, why does the one above it arm at the same time (both rec lights go on)? How can I separate those? Thanks!

It sounds like you probably are trying to specify your recording input through an input on your interface which doesn't exist, or one of your previously recorded tracks are still in use. So 1st make sure that your other tracks are not record enabled, then make sure the input of the track you are recording to is set to either input 1 or input 2 (depending on which input you are using). I believe the UA-25 has only 2 inputs, so you will only be selecting those 2 when recording audio.

ITunes closes after the iPod is conected and views an error message

Now firstly yesterday i had a crash caused by a dealay in processes and after that my i tunes library went blank, luckuly my music was safe and soon i restored it. After i connected the i pod it asked me to reSync the ipod becuase it appeared to be tied to another iTunes library. After i did that the Itunes closed and gave an error message saying that it has unsuspectably closed. After i got it up and running i connected my iPod again which made it think for a while after which it gave the exact same error message. I used the 5 steps which did not realy help because i cant get my iTunes and iPod running at the same time. I decieded to probe the problem first by reinstaling the iTunes which did not have any effect whatsoever on the system or the problem. A thought came to me that the problem might be in the iPod itself and that i should try somehow to reset it to the default settings, because my itunes would not work i got my pc to reset the ipod to the defaults. After which the iTunes did not like my iPod and got the exactly the same error message again. Seemingly i had already renamed and tied my iPod to another library so that would mean that the problem is in the iTunes or the computer itself. Thus i tried to reinstall the iTunes before i tried again but this time insted of "Renewing" it wanted to completly wipe out iTunes to get a fresh start. So i ask you if threr is a way to fix this or atleast tell me how to completly wipe it out!

It sounds like it might be something with your iPod - You might want to post this question to the iPod forum & see if you get some help there.

Error message when syncing iphone

When I try to sync my iphone I'm getting a message "The iphone cannot be synced. The required file cannot be found" I've done a restore. Seems to happen when it gets to adding photos. Any suggestions? Thank you!

I had a sync problem with my Iphone and my Asus maximus extrem mainboard.
Description: The Iphone started to sync but unable to sync music : error message "device exipred"
I did not yet find the answer but only a workaroud as it is probably a firware bug either on Iphone or Asus.
Change de usb port speed in 1 insted of usb 2.0 in the BIOS of your motherboard for the sync time.
Hope this will help other to make it work.
J0K3R
J'ai eu un gros problème de syncronisation avec l'Iphone et ma carte mère dernière génération Asus maximus Extreme.
Descrtiption: L'inphone commence la sycnronisation puis au moment de synchroniser la musique, ça fige et j'ai un
message d'erreur " le périphérique à expiré"
Je n'ai pas trouvé la solution à ce problème qui est soit un souci de firmware Iphone ou un souci de firmware Asus.
J'ai trouvé un Workaroud pour synchroniser l'iphone , il faut passer la vitesse de l'usb en 1 à la place de usb2
dans le bios le temps de la synchro.
en espérant que ça sera utile à d'autres
J0K3R

Error Message When Syncing iPhone -Contacts

I have been using my iPhone for some time now and just recently I have had this issue with my new 16GB phone.
When I put it in to sync I get the following error message: itunes could not sync contacts to the iPhone because the iPhone is disconnected.
The phone is not disconnected and I have not made any changes to my contact information. I tried making a change just to see what would happen, but it made no difference. I am syncing to my iMac.
Has anyone else had this issue? How did you resolve it?
Thanks for your help!

I had a sync problem with my Iphone and my Asus maximus extrem mainboard.
Description: The Iphone started to sync but unable to sync music : error message "device exipred"
I did not yet find the answer but only a workaroud as it is probably a firware bug either on Iphone or Asus.
Change de usb port speed in 1 insted of usb 2.0 in the BIOS of your motherboard for the sync time.
Hope this will help other to make it work.
J0K3R
J'ai eu un gros problème de syncronisation avec l'Iphone et ma carte mère dernière génération Asus maximus Extreme.
Descrtiption: L'inphone commence la sycnronisation puis au moment de synchroniser la musique, ça fige et j'ai un
message d'erreur " le périphérique à expiré"
Je n'ai pas trouvé la solution à ce problème qui est soit un souci de firmware Iphone ou un souci de firmware Asus.
J'ai trouvé un Workaroud pour synchroniser l'iphone , il faut passer la vitesse de l'usb en 1 à la place de usb2
dans le bios le temps de la synchro.
en espérant que ça sera utile à d'autres
J0K3R

Startsap error messages

Hi,
in a NetWeaver 7.11 CE, after SP8, at startup and shutdown there are several error message such as:
bash-3.00$ startsap
Checking SID Database
WARNING: Cannot find SAP Startup Framework Java API, ignored
WARNING: Cannot find IAIK libraries. The started tool may have problems when op                                            ening SecureStore and connections to the Database. The Launher will continue be                                            cause the tool might work even with the missing functionality. In case a ClassN                                            otFoundError follows, please contact the tool developers for fix.
setTrace: false
J2EE Database is not available via test
See logfile /export/home/SIDadm/JdbcCon.log
Running /usr/sap/SID/SYS/exe/run/startj2eedb
Trying to start SID database ...
Log file: /export/home/SIDadm/startdb.log
SID database started
/usr/sap/SID/SYS/exe/run/startj2eedb completed successfully
Starting Startup Agent sapstartsrv
Instance Service on host mnsun003 started
starting SAP Instance SCS01
Startup-Log is written to /export/home/SIDadm/startsap_SCS01.log
/usr/sap/SID/SCS01/exe/sapcontrol -prot NI_HTTP -nr 01 -function Start
Instance on host mnsun003 started
Starting Startup Agent sapstartsrv
Instance Service on host mnsun003 started
starting SAP Instance J60
Startup-Log is written to /export/home/SIDadm/startsap_J60.log
/usr/sap/SID/J60/exe/sapcontrol -prot NI_HTTP -nr 60 -function Start
Instance on host mnsun003 started
/usr/sap/SID/SYS/exe/uc/sunx86_64/startsap: !: not found
Have you got any suggest?
Regards.

I'm getting the same error after applying SP08 to CE 7.1.1. The error also happens out of stopsap. Even worse, my bootstrap cannot communicate with the database, which I'm sure is also because it cannot access the secure store. I can recreate just this error with the following:
eval /usr/sap/GD5/J38/exe/sapjvm_5/bin/java -classpath /usr/sap/GD5/J38/j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart -quiet com.sap.inst.jdbc.connect.JdbcCon /usr/sap/GD5/SYS/exe/run/jdbcconnect.jar:/usr/sap/GD5/SYS/global/security/lib/tools:/usr/sap/GD5/J38/exe/db2jcc.jar:/usr/sap/GD5/J38/exe/db2jcc_license_cu.jar:/usr/sap/GD5/J38/j2ee/cluster/bootstrap: -sec GD5:GD5 -logFile /home/gd5adm/JdbcCon.log
WARNING: Cannot find SAP Startup Framework Java API, ignored
WARNING: Cannot find IAIK libraries. The started tool may have problems when opening SecureStore and connections to the Database. The Launher will continue because the tool might work even with the missing functionality. In case a ClassNotFoundError follows, please contact the tool developers for fix.
setTrace: false
I've tried several things to get it to recognize the IAIK library, which does exist in the global/security/lib/tools path
-rw-rr    1 gd5adm   sapsys        30415 Nov 18 02:57 class_prefetch.lst
-rw-rr    1 gd5adm   sapsys       784396 Nov 16 23:15 iaik_jce.jar
-rw-rr    1 gd5adm   sapsys        27929 Nov 16 23:15 iaik_jsse.jar
-rw-rr    1 gd5adm   sapsys        32037 Nov 16 23:15 iaik_smime.jar
-rw-rr    1 gd5adm   sapsys       185330 Nov 16 23:15 iaik_ssl.jar
drwxr-xr-x    2 gd5adm   sapsys          256 Nov 16 21:09 info
-rw-rr    1 gd5adm   sapsys       178027 Nov 16 23:15 w3c_http.jar
If I can't figure this out I will have to restore my system and maybe try only going up to SP07 this time.
I've also seen several files in my kernel that are set to 555 (no write even on owner!) which really complicates patching. I wonder if this is preventing some files from being updated, especially with sapcpe in play.

SLES9 Oracle10.2.0 EM error message

I've just done a new install of 10.2.0 (Linux x86 32bit) on a SLES9 box. When I bring up the 10g Enterprise Manager it tells me the database is down, but when I hit the 'startup' button I get the following error message:
Resource /em/database/instance/repDown/change State not found on this server
I've looked thru google and metalink and I'm not coming up with much information. I'm fairly new to Linux and the 10g EM, is this related to a bad install? I ran through the "Basic" installation yesterday without any problems, but I haven't gone though the post installation tasks like running the utlrp.sql script since I can't log into the database.
I'd appreciate any help, or a nudge in the right direction.

emagent.log
2008-05-08 10:46:36 Thread-1099534560 EMAgent normal shutdown (00703)
2008-05-08 10:48:44 Thread-1099534560 Starting Agent 10.1.0.4.1 from /home/oracle/oracle/product/10.2.0/db_1 (00701)
2008-05-08 10:48:45 Thread-1099534560 EMAgent started successfully (00702)
emagentfetchlet.log
2008-05-08 10:49:09,361 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
emdctl.log
<nothing inside>
emoms.log
2008-05-08 11:06:16,460 [HttpRequestHandler-22440556] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://scgamadb01l.site:3938/emd/main)(ERROR = INTERNAL_ERROR)
2008-05-08 11:06:27,802 [HttpRequestHandler-8592017] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=scgamadb01l.site)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=aman10g)))
2008-05-08 11:06:27,806 [EMUI_11_06_27_/console/aboutApplication] ERROR em.console doGet.311 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
     at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1901)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:211)
     at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:773)
     at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:396)
     at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:688)
     at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:291)
     at oracle.sysman.eml.app.Console.doGet(Console.java:135)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.sysman.emSDK.svlt.EMRedirectFilter.doFilter(EMRedirectFilter.java:101)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
     at oracle.sysman.db.adm.inst.HandleRepDownFilter.doFilter(HandleRepDownFilter.java:123)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20)
     at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:239)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:600)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
2008-05-08 11:06:46,475 [HttpRequestHandler-22440556] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=scgamadb01l.site)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=aman10g)))
2008-05-08 11:06:46,480 [HttpRequestHandler-22440556] ERROR eml.OMSHandshake getParameterFromDB.402 - Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=scgamadb01l.site)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=aman10g)))
2008-05-08 11:06:46,481 [HttpRequestHandler-22440556] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://scgamadb01l.site:3938/emd/main)(ERROR = INTERNAL_ERROR)
2008-05-08 11:06:46,490 [HttpRequestHandler-8592017] ERROR conn.ConnectionService verifyRepositoryEx.433 - Invalid Connection Pool. ERROR = Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=scgamadb01l.site)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=aman10g)))
2008-05-08 11:06:46,495 [HttpRequestHandler-8592017] ERROR eml.OMSHandshake getParameterFromDB.402 - Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=scgamadb01l.site)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=aman10g)))
2008-05-08 11:06:46,496 [HttpRequestHandler-8592017] ERROR eml.OMSHandshake processFailure.619 - OMSHandshake failed.(AGENT URL = http://scgamadb01l.site:3938/emd/main)(ERROR = INTERNAL_ERROR)
There were Listener problems yesterday after the install. I couldn't dynamically register the database w/ the listener since I couldn't get the db up but I did update the listerner.ora file and lsnrctrl start and stop both work today.

Windows Vista: Ipod Error Message, no longer read by PCs

Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!

you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

INST-07286 Error Message

Similar Messages

Maybe you are looking for