Inst.error "proc.entry GetProcessImageFieNameW not found in DLL PSAPI.DLL"

During installation of SoaSuite v10.1.3.1 (as preparation for later v10.1.3.4) I got an error popup
showing
"procedure entry GetProcessImageFieNameW not found in DLL PSAPI.DLL"
After I clicked OK the installation resumes and was finished (successfully ?).
What does that mean? Is it only a warning or do I have to start a
repair action after installation?
Peter

This can be ignored it is a known issue for basic installs. Basically is it not liking the version of the dll.
You don't need to reinstall.
There is a workaround if you don't want to see it for future installs:
Once you start the installer (OUI), locate the directory it is using as described "C:\Documents and Settings\YOUR_ACCOUNT\Local Settings\Temp\OraInstallYYYY-MM-DD_HH-MM-SSAM" Copy your new PSAPI.DLL (eg:5.1.2600.2180) into place and mark it as READ ONLY. This will prevent OUI from over writing it with its older version (5.0...).
cheers
James

Similar Messages

  • I've had i tunes for a year or two and even after a reinstall,I can't access my itunes because of an error7 or windows error 127.Entry point not found.What do I do???please help

    I've had itunes now for a while.Now when i try and access itunes i get an error of entry point not found.and an error 7 windows error127.Says to reinstall itunes.I do and get the same result.What do I need to do....please help....

    Often that's caused by damage to one of the other software components.
    I'd try the following document first:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (If you're running XP, there's a link to the equivalent instructions for that OS in the document.)

  • Error Message -Entry Point Not Found -Can you help me?

    When I open up my Photoshop 6 Elements I get this error message:  
    "  Entry Point Not Found- the procedure entry point-CFBundle Copy File Type For File Data could not be located in the dynamic link library core Foundation.dll "
    I can click the OK option 3 times and the message disappears and I am able to work in Photoshop. 
    Can anyone tell me what this erro message might mean?
    Thanks!

    I am receiving the exact same message when I open Photoshop Elements 6.0.  ADOBE:  PLEASE respond to our requests and post the fix for this.
    Also, to whoever runs this forum, please do not indicate that this question has been answered in any way.
    thank you.
    frustrated

  • Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

    Hi Experts,
    I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine.  When I try to start the CR 2008, I am getting the below error message:
    Error Title: crw32.exe - Entry Point Not Found
    Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
    Here are the things I tried to resolve the above problem:
    1) Uninstall and Reinstall the CR 2008.  -  No change.
    2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow). 
    None of these seem fix the problem. 
    Can you please help me kick start the Crystal Reports 2008? 
    Thanks,
    Arun

    Please try with this:
    Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
    bcdedit.exe /set nx AlwaysOff
    Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
    bcdedit.exe /set nx AlwaysOn
    Regards,
    Shweta

  • Entry point not found msvcr110.dll error

    I have Photoshop CC and Lightroom CC both of which were working fine until I installed a PIE Primefilm XA scanner with CyberviewX software. The programs will not open since ibstalling CyberviewX. The following error appears: PSCC has a Photoshop.exe-Entry Point Not Found (The procedure entry point_crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll. Any help would be much appreciated. This error only seems to be associated with CS CC and LR CC.

    Had the same problem with Lightroom 6. This solved the problem
    The Program can't start because MSVCR110.dll is missing from your - Microsoft Community

  • ITunes.exe - entry point not found - VideoToolbox.dll error - can't open!

    hello, can somebody please help me...
    Everytime i open iTunes it comes up with this error message:
    The procedure entry point VTSelectAndCreateVideoDecoderInstance could not be located in the dynamics link libary VideoTookbox.dll.
    I've tried uninstalling, reinstalling, and deleting all iTunes and Quickime files and programs but it still wont work...
    Please help me, Thanks!

    *Replying to smyth_m*
    So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
    That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
    http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
    ... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

  • Couldn't start after effect cs4 ( AfterFX.exe - entry point not found ) ( aif_ogl.dll )

    Please Help me!
    I Couldn't start after effect cs4. I also uninstalled and reinstalled it many times but it's giving me this error :
           AfterFX.exe - Entry Point Not Found
    The procedure entry point wglSwapMultipleBuffers could not be located in the dynamic library ........................ \Aif_ogl.dll.

    It means your graphics hardware is not compatible. Update the graphics driver and configure it suitably.
    Mylenium

  • Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

    Hey guys, new to the board here and pretty much at the end of my rope.
    Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
    I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
    Photoshop.exe - Entry Point Not Found
    The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
    Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
    After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
    I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
    So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
    I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
    Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
    I've had photoshop on it for about a year with no problems.
    Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
    Someone save me!

    Hi Chris, thanks for chiming in on my problem.
    I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.)

  • Entry Point Not Found "pluginutils.dll"

    Upgraded to Jabber 10.5 and now users are getting "ciscojabber.exe - entry point not found"  can not be located in the dynamic link library PluginUtils.dll.

    In our case, problem was in previous version of Cisco Jabber. Jabber 9.6.1 was not uninstalled correctly. Old Jabber client was successfully removed and problem is gone.

  • TREXFilter.exe - Entry Point Not Found / sccex.dll

    Hi,
    Recently we've updated our TREX to SAP Netweaver ’04 Version: 6.1.16.02 Build: 6116000416
    When logging on to the TREX server several popups show up with errormessage:
    TREXFilter.exe - Entry Point Not Found
    The procedure entry point CUCheckForEmbeddedObject could not be located
    in the dynamic link library sccex.dll.
    In EP
    (SAP Netweaver ’04 EP6          6.0.16.0.0
    NW ’04 EP6 KMCollaboration     6.0.16.1.0)
    it's not possible to index any index (index administation).
    Server status in TREX monitor is all green.
    Anyone seen this before?
    Any help would be welcome.
    Regards,
    Mark

    Hi,
    I have the same issue with TREX 6.1 revision 25 now...
    Message on OSS open but still no answer.
    The pop-up is preventing TREX from processing the outstanding requests in the Queue...
    Any ideas?
    Kr,
    Michael

  • I cannot open firefox, error states entry point not found

    I can not open firefox, I downloaded an update and ever since, when I try to open I get the error message "no entry point found" What should I do?
    == This happened ==
    Every time Firefox opened
    == today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727; .NET CLR 1.1.4322; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Often that's caused by damage to one of the other software components.
    I'd try the following document first:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (If you're running XP, there's a link to the equivalent instructions for that OS in the document.)

  • Error message - "entry point not found - asl_add_log_file could not be located in the dynamic link library ASL.dll". Does anyone have a clue how this can be fixed? I am running iTunes 9.  Thank you.

    I get this message when I start up my computer and when I try to open itunes.  After a couple of clicks to cancel the message, all programmes still open.  I've run a registry checker to no avail.  I also cannot find the ASL.dll on my computer either.  Any ideas?

    Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

  • Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found

    When I click on any link in a Thunderbird email message I get the error message:
    Firefox.exe – Entry Point Not found
    The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
    I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
    I am on a laptop running Windows 8.1 with all current downloads.

    Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.

  • Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

    Why is my itunes not installing properly?
    I installed itunes day before yesterday,  I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
    I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
    on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
    iTunes exe - Entry Point Not Found
    The procedure entry point
    AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
    be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                               OK
    then after pressing 'OK' the following message:
    iTunes
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
    The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
    Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
    Regards,
    Damian36

    I started up and plugged in my iPad  and then the following message came up:
           iTunes
    ❗️This iPad cannot be used because the required software is not
        Installed. Run the iTunes installer to remove iTunes, then install
        the 64-bit version of iTunes.
                                                                                             OK
    I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
    Started the install and then received this message:
          Apple Mobile Device Support
    ❗️Service 'AppleMobile Device' (Apple Mobile Device)
        failed to start. Verify that you have sufficient
        Privileges to start system services.
       Abort.               Retry.                Ignore
    I tried all tree options, last being ignore.
    I continued to download the other 2 you suggested with out any drama.
    I did a system restart and then opened iTunes.
    Connected my iPad
    Then message appears:
          iTunes .exe - System Error
    ❌ The program can't start because CoreAdioToolbox.dll is missing from
          Your computer. Try reinstalling the program to fix the problem.
                                                                                           OK
    Press OK and then the next message:
           iTunes
    ❌ iTunes was not installed correctly. Please reinstall iTunes.
          Error 7 (Windows error 126)
                                                                                           OK
    Any suggestions?

  • Error(10,47): EntryFlowPageCO not found  in class oracle.apps.ap.oie.entry.

    Hi All,
    I extended a CO named IndusFinalReviewPageCOXX and I got the following error.
    Error(10,47): EntryFlowPageCO not found in class oracle.apps.ap.oie.entry.summary.webui.FinalReviewPageCO in class indus.oracle.apps.ap.oie.entry.summary.webui.IndusFinalReviewPageCOXX.
    I already drag the class file of EntryFlowPageCO in path myclasses\oracle\apps\ap\oie\entry\summary\webui
    and import the file. but the error remains same..after that I compile the class file of EntryFlowPageCO and found one more CO imports in EntryFlowPageCO. I drag class file of that CO also in appropriate path.. But still get the same error.
    Pls give me the solution ASAP.
    Thanks
    Amit Jaitly

    Amit,
    In the standard CO you can check that controller EntryFlowPageCO is not under myclasses\oracle\apps\ap\oie\entry\summary\webui.
    Its under oracle/apps/ap/oie/entry/webui so put the same under this directory structure.
    Regards,
    Gyan

Maybe you are looking for