Instal failed Mavericks

Hi
I did a clean instal of Mavericks by bootable USB
Booted from USB I formated the HDD verified the HDD everithing was OK
Instalation started  copying files and in the end 2min to go it stuck and after while ERROR Message,´´ Instalation failed restart´´
Did the same again + same with Snow Lion USB failed when instaling and as well with Snow Leopard DVD.
Using MacBook Pro 15´´ (early 2011)
Any suggestions?
Thank you very much

Yea I did it like that
But after I did another format and separate the disk to 3 partitions
First instal on Part 1 Failed,well it was instaled but the system didnt start,stuck on the grey screen.
After I did Recivery instal,witch was downloaded from internet and instaled (instalation time took about hour,witch is 2x more),so I dont know if it downloaded some extra files...
Anyway after recovery instal OS X Mavericks finaly starded working looks to be ok now.
Thank you very much

Similar Messages

  • Failed Mavericks Install / Time Machine

    My iMac is stuck in a loop after failed Mavericks install.  The message told me to back up data, erase and install again.  Naturally, I hadn't run Time Machine in a month and had some important files to try and save (stupid, I know).  Fortunately, I got the real important stuff backed up using firewire mode and an old MacBook.
    At this point, the iMac can't boot into either safe mode or into the disk repair with my old Snow Leopard disk.  My question is whether I can now connect my external drive with an existing backup to the MacBook and have it make a backup of the iMacs contents.  I'm curious whether Time Machine will recognize the iMac's hard drive as the same volume even though it is mounted on the MacBook as an external drive.  Will this work or should I go buy a new external drive and try and clone the iMac's contents?
    I have AppleCare but I'd like to take care of this prior to taking it in as they may want to replace the drive.  The Time Machine method seems preferable so I can restore the system exactly the way it was very easily.

    My iMac is stuck in a loop after failed Mavericks install.  The message told me to back up data, erase and install again.  Naturally, I hadn't run Time Machine in a month and had some important files to try and save (stupid, I know).  Fortunately, I got the real important stuff backed up using firewire mode and an old MacBook.
    At this point, the iMac can't boot into either safe mode or into the disk repair with my old Snow Leopard disk.  My question is whether I can now connect my external drive with an existing backup to the MacBook and have it make a backup of the iMacs contents.  I'm curious whether Time Machine will recognize the iMac's hard drive as the same volume even though it is mounted on the MacBook as an external drive.  Will this work or should I go buy a new external drive and try and clone the iMac's contents?
    I have AppleCare but I'd like to take care of this prior to taking it in as they may want to replace the drive.  The Time Machine method seems preferable so I can restore the system exactly the way it was very easily.

  • My install of maverick failed as disk is damaged and cannot repaired. I tried to erase disk but got error that disk cannot be umounted. Please help! Thank you very much.

    My install of maverick failed as disk is damaged and cannot repaired. I tried to erase disk but got error disk cannot be unmounted. Please help. What can i do? Thank you very much.

    First have you got a backup of your data? If not try to get one now while you have some access to the drive. The drive is probably faulty and will need to be replaced, without the backup you risk losing the data.
    Have you a bootable external USB drive with Mavericks on it, if so boot from that and try and repair or erase the drive and reinstall Mavericks.
    If you don't have Mavericks on an external drive,  boot from you Leopard DVD ( I am presumimg your profile is correct) and run Disk Utility from there, you may be able to erase the drive and reload Leopard. You can then install Mavericks. Even if all that works you will most likely need a new drive in the near future.

  • Mavericks Install Failed?

    I tried to install the new OS Mavericks update, but it keeps saying Install Failed Macintosh HD is damaged or corrupt and needs to be repaired.
    I open the Utilities in the toolbar
    Run Varify Disk, it says i need to repair disk
    But the button is grayed out and i cant cancel the install because it says the selected drive doesnt have enough information!
    Please help :/
    Thanks

    nickbell32 wrote:
    I'm having the same problem. I don't really want to do a back up and a complte restore. Does anyone know how to get back onto lion from this stage?
    Without a backup you will need to erase the drive completely and reinstall whatever was the original version of OSX on the machine, then perform all updates / upgrades / app installations again.
    A backup is much simpler, not to mention quicker.

  • I downloaded mavericks but the install failed. The message stated there was an error with the disk which required repairing.

    Help please!  I downloaded mavericks but the install failed. The message stated there was an error with the disk which required repairing. Using disk utility repair disk is not available ( greyed out) and verify disk stops and says disc requires repairing. So the online support page suggests I erase the disc and reinstall then back up from time machine ( I have a recent backup). But when I try to erase the Macintosh HD I get the message volume erase failed with the error couldn't unmount disk.
    I'd be very grateful for any help anyone can give me.
    I have a macbook pro 17" mid 2009-  running on snow leopard 10.6.8 ...  I lost the snow leopard disk so I don't know what to do from there ... I tried restarting by clicking SHIFT (safe mode) after the chime comes up,  but It doesnt seem to make any difference ... please help !!
    thank you sooo much
    many many thanks for your hep guys !!

    Whenever you install a new version of OS X being installed, the disk is checked just as if you were using Disk Utility checks the disk to see if the disk is damaged. And,, from what you report, your disk is damaged and needs to be replaced. This isn't a fault with Mavericks - your disk may have been failing for years.
    It's a very good thing that you've a recent backup as you're going to need it. I would suggest that you evaluate what functionality that you need in a new disk and go shopping at OWC for a new drive - HGST (or any Hitachi), Seagate SSHDs or Toshiba drives are all good. Be sure that you buy an enclosure for the 'new' drive so that you can format it using Disk Utility before installing it into your machine - you can get one of those from OWC as well.
    Good luck - call back with any questions...
    Clinton

  • Mavericks install failed, says disk is damaged and can't be repaired. Help.

    My install failed early in the setup process, and said that my HD is damaged and can't be repaired.  It reboots in install mode, I go to disk utility, and can't run repair.  I've tried to boot to safe mode, but the progress bar goes about a third of the way and it just powers off, so no way to get in to backup or do anything on this machine.  My time machine backup is old, but mostly I just have music that I can redownload from iTunes or re-rip from cd, so not worried about data loss.  So do I reformat?  How would I get an OS on there again, since there would be no way to boot up or get an OS Download onto that machine?  This is the first time I miss the old cd/dvd disk distribution.   I'm stumped, any help and guidance is appreciated.  It's a MacBook Pro if that matters.

    Have you got back to restore from if all else fails?
    Try booting from the grey restore disk that came with the Mac: disk in drive and restart holding down the 'c' key. Hopefully it'll boot, albeit slowly. At the first screen select your language and from the menu bar of the next screen choose Utilities>Disk Utility. Select Macintosh HD>Repair Disk. Hopefully DU wil repair the errors. Click on repair disk again until you get a clean pass. Try to restart as normal from the Apple menu.

  • Acrobat XI Pro wont install on Mavericks Mac

    Hoping someone might be able to help.
    Downloaded Acrobat XI Pro trail
    Successful
    But will not install on Mac running Mavericks OS 10.9.2
    Message returned at very end of install process during the running package scripts stage is
    "The Installation Failed ! The installer encountered an error that caused the installation to fail. Contact the software manufacturer... etc"
    at a bit of dead end here.... ??
    Thanks

    ok found the file...
    here is the dialogue:
    Marker - 21 Mar 2014 18:22:12
    Mar 21 18:22:42 speedport-2.local Installer[638]: LSExceptions [0x6180000b3560] loaded
    Mar 21 18:22:42 speedport-2.local Installer[638]: @(#)PROGRAM:Install  PROJECT:Install-846
    Mar 21 18:22:42 speedport-2.local Installer[638]: @(#)PROGRAM:Installer  PROJECT:Installer-721
    Mar 21 18:22:42 speedport-2.local Installer[638]: Hardware: iMac14,1 @ 2.70 GHz (x 4), 8192 MB RAM
    Mar 21 18:22:42 speedport-2.local Installer[638]: Running OS Build: Mac OS X 10.9.2 (13C64)
    Mar 21 18:22:42 speedport-2.local Installer[638]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Mar 21 18:22:42 speedport-2.local Installer[638]: Env: TMPDIR=/var/folders/fk/y_2gt1z16lzcts8ty9gvpnlh0000gn/T/
    Mar 21 18:22:42 speedport-2.local Installer[638]: Env: SHELL=/bin/bash
    Mar 21 18:22:42 speedport-2.local Installer[638]: Env: HOME=/Users/peterfoss
    Mar 21 18:22:42 speedport-2.local Installer[638]: Env: USER=peterfoss
    Mar 21 18:22:42 speedport-2.local Installer[638]: Env: LOGNAME=peterfoss
    Mar 21 18:22:42 speedport-2.local Installer[638]: Env: SSH_AUTH_SOCK=/tmp/launch-RxlIb5/Listeners
    Mar 21 18:22:42 speedport-2.local Installer[638]: Env: Apple_PubSub_Socket_Render=/tmp/launch-oJI4oY/Render
    Mar 21 18:22:42 speedport-2.local Installer[638]: Env: __CF_USER_TEXT_ENCODING=0x1F5:0:0
    Mar 21 18:22:42 speedport-2.local Installer[638]: Env: __CHECKFIX1436934=1
    Mar 21 18:22:42 speedport-2.local Installer[638]:  Adobe Acrobat XI Pro   Installation Log
    Mar 21 18:22:42 speedport-2.local Installer[638]: Opened from: /Volumes/Acrobat 11/Adobe Acrobat XI/Adobe Acrobat XI Pro Installer.pkg
    Mar 21 18:22:43 speedport-2.local Installer[638]: Product archive /Volumes/Acrobat 11/Adobe Acrobat XI/Adobe Acrobat XI Pro Installer.pkg trustLevel=202
    Mar 21 18:22:47 speedport-2.local Installer[638]: JS: 10.6 or higher:1
    Mar 21 18:22:53 speedport-2.local Installer[638]: LSExceptions [0x6180000b3560] unloaded
    Mar 21 18:22:53 speedport-2.local Installer[638]: InstallerStatusNotifications plugin loaded
    Mar 21 18:23:00 speedport-2.local runner[643]: Administrator authorization granted.
    Mar 21 18:23:00 speedport-2.local Installer[638]: ================================================================================
    Mar 21 18:23:00 speedport-2.local Installer[638]: User picked Standard Install
    Mar 21 18:23:00 speedport-2.local Installer[638]: Choices selected for installation:
    Mar 21 18:23:00 speedport-2.local Installer[638]:           Install: " Adobe Acrobat XI Pro "
    Mar 21 18:23:00 speedport-2.local Installer[638]:                     Adobe Acrobat XI Pro Installer.pkg#acrobatpreinstall.pkg : com.adobe.acrobat.11.viewer.preinstall.pkg.MUI : 11.0.0
    Mar 21 18:23:00 speedport-2.local Installer[638]:                     Adobe Acrobat XI Pro Installer.pkg#AdobeApplicationManager.pkg : com.adobe.PDApp.AdobeApplicationManager.installer.pkg : 1
    Mar 21 18:23:00 speedport-2.local Installer[638]:           Install: "Application" at path "//Applications/Adobe Acrobat XI Pro"
    Mar 21 18:23:00 speedport-2.local Installer[638]:                     Adobe Acrobat XI Pro Installer.pkg#application.pkg : com.adobe.acrobat.11.viewer.app.pkg.MUI : 11.0.0
    Mar 21 18:23:00 speedport-2.local Installer[638]:           Install: "Browser Plug-In"
    Mar 21 18:23:00 speedport-2.local Installer[638]:                     Adobe Acrobat XI Pro Installer.pkg#browserPlugin.pkg : com.adobe.acrobat.11.viewer.browser.pkg.MUI : 11.0.0
    Mar 21 18:23:00 speedport-2.local Installer[638]:                     Adobe Acrobat XI Pro Installer.pkg#support.pkg : com.adobe.acrobat.11.viewer.appsupport.pkg.MUI : 11.0.0
    Mar 21 18:23:00 speedport-2.local Installer[638]:                     Adobe Acrobat XI Pro Installer.pkg#automator.pkg : com.adobe.acrobat.11.viewer.print_automator.pkg.MUI : 11.0.0
    Mar 21 18:23:00 speedport-2.local Installer[638]:                     Adobe Acrobat XI Pro Installer.pkg#pdfservices.pkg : com.adobe.acrobat.11.viewer.print_pdf_services.pkg.MUI : 11.0.0
    Mar 21 18:23:00 speedport-2.local Installer[638]: ================================================================================
    Mar 21 18:23:00 speedport-2.local Installer[638]: It took 0.00 seconds to summarize the package selections.
    Mar 21 18:23:00 speedport-2.local Installer[638]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
    Mar 21 18:23:00 speedport-2.local Installer[638]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#acrobatpreinstall.pkg
    Mar 21 18:23:00 speedport-2.local Installer[638]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#AdobeApplicationManager.pkg
    Mar 21 18:23:00 speedport-2.local Installer[638]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#application.pkg
    Mar 21 18:23:00 speedport-2.local Installer[638]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#browserPlugin.pkg
    Mar 21 18:23:00 speedport-2.local Installer[638]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#support.pkg
    Mar 21 18:23:00 speedport-2.local Installer[638]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#automator.pkg
    Mar 21 18:23:00 speedport-2.local Installer[638]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#pdfservices.pkg
    Mar 21 18:23:00 speedport-2.local Installer[638]: Set authorization level to root for session
    Mar 21 18:23:01 speedport-2.local Installer[638]: Will use PK session
    Mar 21 18:23:01 speedport-2.local Installer[638]: Starting installation:
    Mar 21 18:23:01 speedport-2.local Installer[638]: Configuring volume "Macintosh HD"
    Mar 21 18:23:01 speedport-2.local Installer[638]: Preparing disk for local booted install.
    Mar 21 18:23:01 speedport-2.local Installer[638]: Free space on "Macintosh HD": 686.78 GB (686782963712 bytes).
    Mar 21 18:23:01 speedport-2.local Installer[638]: Create temporary directory "/var/folders/fk/y_2gt1z16lzcts8ty9gvpnlh0000gn/T//Install.6388T9MBq"
    Mar 21 18:23:01 speedport-2.local Installer[638]: IFPKInstallElement (7 packages)
    Mar 21 18:23:01 speedport-2.local Installer[638]: Using authorization level of root for IFPKInstallElement
    Mar 21 18:23:01 speedport-2.local installd[649]: installd: Starting
    Mar 21 18:23:01 speedport-2.local installd[649]: installd: uid=0, euid=0
    Mar 21 18:23:01 speedport-2.local installd[649]: PackageKit: Adding client PKInstallDaemonClient pid=638, uid=501 (/System/Library/CoreServices/Installer.app/Contents/MacOS/Installer)
    Mar 21 18:23:01 speedport-2.local Installer[638]: PackageKit: Enqueuing install with boosting
    Mar 21 18:23:01 speedport-2.local installd[649]: PackageKit: ----- Begin install -----
    Mar 21 18:23:01 speedport-2.local installd[649]: PackageKit: request=PKInstallRequest <7 packages, destination=/>
    Mar 21 18:23:01 speedport-2.local installd[649]: PackageKit: packages=(
                  "PKLeopardPackage <file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20 Installer.pkg#acrobatpreinstall.pkg>",
                  "PKLeopardPackage <file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20 Installer.pkg#AdobeApplicationManager.pkg>",
                  "PKLeopardPackage <file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20 Installer.pkg#application.pkg>",
                  "PKLeopardPackage <file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20 Installer.pkg#browserPlugin.pkg>",
                  "PKLeopardPackage <file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20 Installer.pkg#support.pkg>",
                  "PKLeopardPackage <file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20 Installer.pkg#automator.pkg>",
                  "PKLeopardPackage <file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20 Installer.pkg#pdfservices.pkg>"
    Mar 21 18:23:03 speedport-2.local installd[649]: PackageKit: Skipping component "com.adobe.acrobat.pdfviewer" (*-11.0.0-*-*) because the version 11.0.6-11.0.6-*-* is already installed at /Library/Internet Plug-Ins/AdobePDFViewer.plugin.
    Mar 21 18:23:03 speedport-2.local installd[649]: PackageKit: Skipping component "com.adobe.acrobat.pdfviewerNPAPI" (*-11.0.0-*-*) because the version 11.0.6-11.0.6-*-* is already installed at /Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin.
    Mar 21 18:23:04 speedport-2.local installd[649]: PackageKit: Extracting file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#acrobatpreinstall.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/26C B1C52-70C2-4E7D-9BBA-D9099AAF8A19.activeSandbox/Root/tmp, uid=0)
    Mar 21 18:23:06 speedport-2.local installd[649]: PackageKit: Extracting file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#AdobeApplicationManager.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/26C B1C52-70C2-4E7D-9BBA-D9099AAF8A19.activeSandbox/Root, uid=0)
    Mar 21 18:23:14 speedport-2.local installd[649]: PackageKit: Extracting file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#application.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/26C B1C52-70C2-4E7D-9BBA-D9099AAF8A19.activeSandbox/Root/Applications/Adobe Acrobat XI Pro, uid=0)
    Mar 21 18:23:34 speedport-2.local installd[649]: PackageKit: Extracting file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#browserPlugin.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/26C B1C52-70C2-4E7D-9BBA-D9099AAF8A19.activeSandbox/Root/Library/Internet Plug-Ins, uid=0)
    Mar 21 18:23:35 speedport-2.local installd[649]: PackageKit: Extracting file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#support.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/26C B1C52-70C2-4E7D-9BBA-D9099AAF8A19.activeSandbox/Root/Library/Application Support, uid=0)
    Mar 21 18:23:37 speedport-2.local installd[649]: PackageKit: Extracting file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#automator.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/26C B1C52-70C2-4E7D-9BBA-D9099AAF8A19.activeSandbox/Root/Library/Automator, uid=0)
    Mar 21 18:23:37 speedport-2.local installd[649]: PackageKit: Extracting file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20I nstaller.pkg#pdfservices.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/26C B1C52-70C2-4E7D-9BBA-D9099AAF8A19.activeSandbox/Root/Library/PDF Services, uid=0)
    Mar 21 18:23:37 speedport-2.local installd[649]: PackageKit: prevent user idle system sleep
    Mar 21 18:23:37 speedport-2.local installd[649]: PackageKit: suspending backupd
    Mar 21 18:23:38 speedport-2.local installd[649]: PackageKit: Executing script "./preinstall" in /private/tmp/PKInstallSandbox.NWkOt5/Scripts/com.adobe.acrobat.11.viewer.preinstall.pkg.M UI.yMr7Mp
    Mar 21 18:23:38 speedport-2.local install_monitor[651]: Temporarily excluding: /Applications, /Library, /System, /bin, /private, /sbin, /usr
    Mar 21 18:23:39 speedport-2.local installd[649]: PackageKit: Executing script "./preinstall" in /private/tmp/PKInstallSandbox.NWkOt5/Scripts/com.adobe.PDApp.AdobeApplicationManager.inst aller.pkg.jDncBB
    Mar 21 18:23:39 speedport-2.local installd[649]: ./preinstall: AAMInstaller: PRE AAM INSTALL....................
    Mar 21 18:23:39 speedport-2.local installd[649]: ./preinstall: AAMInstaller: AAMIAssetsDir /private/tmp/PKInstallSandbox.NWkOt5/Scripts/com.adobe.PDApp.AdobeApplicationManager.inst aller.pkg.jDncBB
    Mar 21 18:23:39 speedport-2.local installd[649]: ./preinstall: AAMInstaller: Checking for ignore AAM.
    Mar 21 18:23:39 speedport-2.local installd[649]: ./preinstall: AAMInstaller: ignore_aam return code 1.
    Mar 21 18:23:39 speedport-2.local installd[649]: ./preinstall: AAMInstaller: Launch AAM Installation in silent mode...
    Mar 21 18:23:39 speedport-2.local installd[649]: ./preinstall: Starting Installer...
    Mar 21 18:23:39 speedport-2.local installd[649]: ./preinstall: In Silent mode.
    Mar 21 18:24:13 speedport-2.local installd[649]: ./preinstall: Installation successful.
    Mar 21 18:24:13 speedport-2.local installd[649]: ./preinstall: Exiting Installer with Code: 0
    Mar 21 18:24:13 speedport-2.local installd[649]: ./preinstall: AAMInstaller: Exit status: 0
    Mar 21 18:24:13 speedport-2.local installd[649]: ./preinstall: AAMInstaller: For more detailed logs check:~/Library/Logs/PDApp.log
    Mar 21 18:24:13 speedport-2.local installd[649]: ./preinstall: AAMInstaller: AAM Install Success.
    Mar 21 18:24:13 speedport-2.local installd[649]: ./preinstall: AAMInstaller: END OF PRE AAM INSTALL....................
    Mar 21 18:24:13 speedport-2.local installd[649]: PackageKit: Executing script "./preinstall" in /private/tmp/PKInstallSandbox.NWkOt5/Scripts/com.adobe.acrobat.11.viewer.app.pkg.MUI.Tbt8 Cx
    Mar 21 18:24:14 speedport-2.local installd[649]: PackageKit: Using trashcan path /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/PKInstallSandboxTrash/26CB1C52-70C2-4E7D -9BBA-D9099AAF8A19.sandboxTrash for sandbox /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/26CB1C52-70C2-4E 7D-9BBA-D9099AAF8A19.activeSandbox
    Mar 21 18:24:14 speedport-2.local installd[649]: PackageKit: Shoving /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/26CB1C52-70C2-4E 7D-9BBA-D9099AAF8A19.activeSandbox/Root (3 items) to /
    Mar 21 18:24:20 speedport-2.local installd[649]: PackageKit: Executing script "./postinstall" in /private/tmp/PKInstallSandbox.NWkOt5/Scripts/com.adobe.PDApp.AdobeApplicationManager.inst aller.pkg.jDncBB
    Mar 21 18:24:20 speedport-2.local installd[649]: ./postinstall: AAMInstaller: POST AAM INSTALL....................
    Mar 21 18:24:20 speedport-2.local installd[649]: ./postinstall: AAMInstaller: END OF POST AAM INSTALL....................
    Mar 21 18:24:20 speedport-2.local installd[649]: PackageKit: Executing script "./postinstall" in /private/tmp/PKInstallSandbox.NWkOt5/Scripts/com.adobe.acrobat.11.viewer.app.pkg.MUI.Tbt8 Cx
    Mar 21 18:24:21 speedport-2.local installd[649]: ./postinstall: Unexpected element in installation dir: Icon
              . Not customizing the icon.
    Mar 21 18:24:22 speedport-2.local installd[649]: ./postinstall: AcroInstallLocaleID=MUI added in AcroLocale.plist of Adobe Acrobat Pro.app/Contents
    Mar 21 18:24:23 speedport-2.local installd[649]: ./postinstall: Replacing the hive AdobePDFSettings of /Library/Preferences/com.adobe.PDFAdminSettings.plist with that of /private/tmp/PKInstallSandbox.NWkOt5/Scripts/com.adobe.acrobat.11.viewer.app.pkg.MUI.Tbt8 Cx/Resources/com.adobe.PDFAdminSettings.plist
    Mar 21 18:24:23 speedport-2.local installd[649]: ./postinstall: Error in converting the plist /Library/Preferences/com.adobe.PDFAdminSettings.plist to xml1 format
    Mar 21 18:24:23 speedport-2.local installd[649]: ./postinstall: Could not install PDFAdminSettings
    Mar 21 18:24:23 speedport-2.local install_monitor[651]: Re-included: /Applications, /Library, /System, /bin, /private, /sbin, /usr
    Mar 21 18:24:24 speedport-2.local installd[649]: PackageKit: releasing backupd
    Mar 21 18:24:24 speedport-2.local installd[649]: PackageKit: allow user idle system sleep
    Mar 21 18:24:24 speedport-2.local installd[649]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “Adobe Acrobat XI Pro Installer.pkg”." UserInfo=0x7f975487b370 {NSFilePath=./postinstall, NSURL=file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20P ro%20Installer.pkg#application.pkg, PKInstallPackageIdentifier=com.adobe.acrobat.11.viewer.app.pkg.MUI, NSLocalizedDescription=An error occurred while running scripts from the package “Adobe Acrobat XI Pro Installer.pkg”.} {
                  NSFilePath = "./postinstall";
                  NSLocalizedDescription = "An error occurred while running scripts from the package \U201cAdobe Acrobat XI Pro Installer.pkg\U201d.";
                  NSURL = "file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20Pro%20 Installer.pkg#application.pkg";
                  PKInstallPackageIdentifier = "com.adobe.acrobat.11.viewer.app.pkg.MUI";
    Mar 21 18:24:24 speedport-2.local Installer[638]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “Adobe Acrobat XI Pro Installer.pkg”." UserInfo=0x6000002e5a80 {NSFilePath=./postinstall, NSURL=file://localhost/Volumes/Acrobat%2011/Adobe%20Acrobat%20XI/Adobe%20Acrobat%20XI%20P ro%20Installer.pkg#application.pkg, PKInstallPackageIdentifier=com.adobe.acrobat.11.viewer.app.pkg.MUI, NSLocalizedDescription=An error occurred while running scripts from the package “Adobe Acrobat XI Pro Installer.pkg”.}
    Mar 21 18:24:24 speedport-2.local installd[649]: PackageKit: Running idle tasks
    Mar 21 18:24:24 speedport-2.local installd[649]: PackageKit: Removing client PKInstallDaemonClient pid=638, uid=501 (/System/Library/CoreServices/Installer.app/Contents/MacOS/Installer)
    Mar 21 18:24:24 speedport-2.local installd[649]: PackageKit: Done with sandbox removals

  • Tried to install OSX Mavericks, Now Won't Install

    Started to download and install OSX Mavericks on my Mac Pro laptop.  For some reason download failed, and I get a message to that effect.  Message says to go to "Purchased Items" in App Store and try to download again.  Continually get message that there is an error and download fails.  Any suggestions to get the OSX Mavericks successfully downloaded?

    Ok so I worked out how to get into recovery mode. Turns out I was doing it wrong! I used an external USB drive to access recovery mode.
    I ran disk utility which identified and fixed some errors on the HD. I thought this might solve the problem but when I restarted the same problem occurred. I then restored my time machine backup which thankfully worked.
    I tried installing mavericks again! Upon restarting and completing the install, I got the message 'OSX has been installed. Your computer will now restart'. After the countdown had finished I got the beach ball which span eternally again, just like last time. After about 10 mins I did a hard reset and again OSX won't load.
    Lame...

  • How do I recover files when the install fails due to a damaged HD

    While updating to Mavericks for Mountain Lion, the install failed. It stated that the hard drive was damaged. I ran disk utilities and the option to repair is not avalible. Prior to the install there was not a problem. I unfortantly do not have a back up to restore from.  Do any of you fine Apple supporters have any suggestions?

    Emergency recovery of your data on your internal drive/SSD.
    Can you boot in normal or Safe Boot mode (Boot Command-R)?
    If so do so and run a Time Machine backup.
    If you can’t run Time Machine, proceed below.
              You will need a blank disk or a disk that you are willing to erase (a lose the data on it).
              If you do not have one it is time to purchase one larger than your internal drive/SSD.
              At this point your goal is to recover as much data as you can onto an external disk.
              First, disconnect all unneeded peripheral equipment, including external drives.
              (Use an external wired keyboard and mouse if necessary.)
    A)          Try to boot in normal mode (just press the power key).
              If that won't work try to boot in Safe Mode.
                        • Press the power button and as you hear the bong, then hold down the Shift key.
              If it does not work either way jump to B.
              If it booted, from the Finder > Go > Utilities > Disk Utility, jump to C
                (formatting the emergency drive) and come back to here.
              Go > Computer.
              Double click on the system disk and then on the Users folder.
              Drag your named user folder to to the recovery disk.
              If that does not work double click on the named user folder
            and try dragging each folder individually to the recovery disk.
              Repeat for other users if there are any (logging into their accounts or an admin account).
              If this works you have recovered your personal data.
    B)          Boot the recovery partition.
              • Press the power button and as you hear the bong, then hold down the Command and R keys.
               If that won't work jump to E.
              Once booted, click on Disk Utility.
    C)          To format (and erase) the destination recovery disk:
              Plug in the drive you are about to erase.
              Select the volume that is NOT your system disk.
              Click on Partition.
              Pull down under Partition Layout to 1 Partition.
              Click on Options…
              Select GUID Partition Table.
              Name: Emergency Backup
              Format: Select Mac OS Extended (journaled)
              Click Apply.
              Click Partition.
    D)          Drag and drop the named system disk to Source:
              Drag an drop Emergency Backup to Destination:
              (Do not reverse these.)
              Click Restore (the lower Restore button).
    E)          Seek expert help to test/replace the internal disk.
              If it is an SSD then trash it.  DiskWarrior recovery from damaged SSDs is futile.
              Save the ailing disk.  You might be able to recover data on it
              buy placing it in an external enclosure and mounting it from a healthy machine
              then using the Finder and/or DiskWarrior.
              http://www.alsoft.com/diskwarrior/
    F) Once your system is healthy again be sure to maintain two reasonably current backups.
    More about backups:
    Time Machine Basics: http://support.apple.com/kb/ht1427
    Most commonly used backup methods:  https://discussions.apple.com/docs/DOC-3045
    Methodology to protect your data.  Backups vs. Archives.  Long-term data protection: https://discussions.apple.com/docs/DOC-6031

  • HT6114 I cannot log in to my AOL after installing OSX Mavericks

    Why can I cannot log into to my AOL account after installing OSX Mavericks?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • HT1145 I downloaded the Airport Utility 5.6 for OS X Lion and when I finish installing it sends a message that says "the instalation failed contact your software provider"

    I downloaded the Airport Utility 5.6 for OS X Lion and when I finish installing it sends a message that says "the instalation failed contact your software provider" And seems like thats the solution so I can use my time capsule.
    Thanks

    Thanks. Please review my post above to see that we asked five basic questions.
    Looks like we got two answers.
    Can you please provide answers to the other questions that we asked?
    1)  Are you trying to connect your Time Capsule to your modem using an Ethernet cable?
    2)  What is the make and model number of your modem?
    3)  Are you still using Lion (10.7.5) as you indicate in your profile, or have you updated to Mountain Lion or Mavericks?
    I understand that things appear clear to you there, but we cannot read your mind or see your network, so we only know as much about your problem and your network as you can tell us.

  • Flash Player Install failed with error code: 30

    Hi, I want to report a problem with the Adobe Flash Player 13.0.0.182 (Mac OS X, English) installer on OS X 10.9.2. Mavericks.  I'm posting this so the engineers will know what to fix in the next update version.
    I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
    Symptom is the first installer downloads the 2nd, starts to launch it, then quits it with "Error: Unable to proceed with the installation" and a green (success?) checkmark.  The GUI provides no other assistance except to "FINISH", which leads to the generic "Adobe Flash Player could not be installed." page.
    The system log says: Adobe Flash Player Install Manager[22567]: Install failed with error code: 30.
    The FlashPlayerInstallManager.log says:
    2014-04-13 16:12:01 -0500 [I]  IM: ---------- log start ----------
    2014-04-13 16:12:01 -0500 [I]  IM: All install checks pass
    2014-04-13 16:12:01 -0500 [W]  IM: Unexpected umask value for process: 0
    2014-04-13 16:12:06 -0500 [I]  IM: User does not have any processes that need to be closed.
    2014-04-13 16:12:06 -0500 [I]  IM: [install started]
    2014-04-13 16:12:06 -0500 [E]  RA: Unable to launch FPInstallHelper. Error = 'launch path not accessible'
    2014-04-13 16:12:06 -0500 [E]  RA:
    Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/FPInstallHelper':
        NSFileCreationDate = "2014-03-27 04:20:43 +0000";
        NSFileExtensionHidden = 0;
        NSFileGroupOwnerAccountID = 0;
        NSFileGroupOwnerAccountName = wheel;
        NSFileHFSCreatorCode = 0;
        NSFileHFSTypeCode = 0;
        NSFileModificationDate = "2014-03-27 04:20:43 +0000";
        NSFileOwnerAccountID = 0;
        NSFileOwnerAccountName = root;
        NSFilePosixPermissions = 2541;
        NSFileReferenceCount = 1;
        NSFileSize = 13348;
        NSFileSystemFileNumber = 4892044;
        NSFileSystemNumber = 16777224;
        NSFileType = NSFileTypeRegular;
    2014-04-13 16:12:06 -0500 [E]  RA:
    Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T':
        NSFileCreationDate = "2014-04-07 13:43:21 +0000";
        NSFileExtensionHidden = 0;
        NSFileGroupOwnerAccountID = 0;
        NSFileGroupOwnerAccountName = wheel;
        NSFileModificationDate = "2014-04-13 21:12:06 +0000";
        NSFileOwnerAccountID = 0;
        NSFileOwnerAccountName = root;
        NSFilePosixPermissions = 449;
        NSFileReferenceCount = 12;
        NSFileSize = 408;
        NSFileSystemFileNumber = 4552991;
        NSFileSystemNumber = 16777224;
        NSFileType = NSFileTypeDirectory;
    2014-04-13 16:12:06 -0500 [E]  IM: [install failed: 30]
    2014-04-13 16:12:06 -0500 [E]  IM: Install failed with error code: 30.
    2014-04-13 16:12:06 -0500 [I]  IM: ----------  log end  ----------

    I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
    Regardless... I still recommend "falling back" to 12 until they get this release right for everyone. I've read plenty of posts in the Apple forums from new iMac, Mini and MacBook users who've had nothing but trouble. Even the "gurus" there are linking to Chris Campbell's post here:
    ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround
    Using the offline installer completely eliminates the errors seen with the stub installer.

  • Install Failed: OS X could not be installed on your computer.

    So my Macbook was bought last December 2012. It's specs should be able to run Mavericks.
    I've downloaded the software already, so far so good.
    When installation starts, it fails and I get this message:
    "Install Failed: OS X could not be installed on your computer. OS X can't be installed on the disk because a recovery system can't be created. Visit www.apple.com/support/no-recovery to learn more"
    Now it tells me to go to this page:
    http://support.apple.com/kb/HT4649
    Then I find the message above and tells me to go here:
    http://support.apple.com/kb/TS3926
    Then I try the solution in the 2nd link and still the installation fails.
    Please note that I have a Windows 7 BootCamp Partition that I would as much as possible not delete or reformat as I have too many important stuff there.
    Any ideas?

    .Impact wrote:
    Philly_Phan wrote:
    .Impact wrote:
    Philly_Phan wrote:
    My WAG is that you have a HD space limitation.  I've never used Boot Camp so bear with me.  Is there any way that you could back up the contents elsewhere so that you can reformat and repartition?
    I have an External Hard Drive here but it's currently being used as storage space for some of my media. Is it possible to backup to a partition of an external hard drive?
    I've never done it but it should be possible.  Don't forget that a "partition" acts like a real drive and it is a real drive in every sense of the word except that it shares a physical disc with another drive.
    Will try that once I get home from University later. Should I back up both OS X and Bootcamp into the hard drive or just one of them? Then reinstall Mountain Lion, then install Mavericks? Did I get that right?
    I don't see any reason why you need to reinstall Mountain Lion.  It's been a long time since I've done any partitioning but, if I remember correctly, you can enlarge the main partition provided that there is no data in the secondary (Boot Camp) partition.  If I'm correct, you'd need to first back up Boot Camp, then erase the original BC partition, then resize the partitions and finally load Mavericks.

  • Mac Pro Mid 2010 keeps restarting after installing OSX Mavericks

    Hello,
    my Mac Pro Mid 2010 started quitting and restarting after installing the Mavericks OSX. I was thinking about wiping out the drive and reinstalling OS X Mountain Lion but thought I should see if anyone else is experiencing these issues before going that route.
    It just intermittently restarts and it tries to restart multiple times before it will actually start up again. It's not issuing a crash report. It just quits out and restarts. It started doing this just at initial startup. It now will quit and restart at any given time and it will take multiple times attempting to start before it actually starts up. I've even had to shut it down because it would going through that startup sequence without starting. No perceivable pattern as to why this is occurring. No specific programs that it occurs in. The only thing I know for certain is that it started happening after installing Mavericks OSX – OSX Mountain Lion was fine. I also made sure to unistall Mountain Lion before installing Mavericks with those potential issues of trying to install one operating system over another. Any thoughts would be appreciated.
    Specs for Mac Pro Mid 2010:
    - 2 x 2.66 GHz 6-Core Intel Xeon
    - 14 GB 1333 MHz DDR3 ECC
    - ATI Radeon HD 5770 1024 MB
    - OS X 10.9.2

    Hello Linc,
    I followed your instructions. I have information for the BOOT_TIME and for SYSTEM DIAGNOSTICS sections. I've included all within one post with heading separators between the two sections. I wasn't sure if you needed this posted as two separate posts or not. If this isn't correct, please let me know and I'll do again. Hopefully I didn't pull too much content for the BOOT_TIME section. I was trying to search for enough diverse content that would clearly represent what might be occurring. It was also challenging to choose content for the BOOT_TIME section though because there was no time-stamped content close to the time of BOOT_TIME time stamp. The last time I restarted my system was hours before I attempted your exercise. And, I haven't experienced "crashing"  more than it just automatically restarts in the middle of things. I wonder if that's why there were no .crash reports? There was only a list of .panic reports so that's what I provided. Thanks for your help Linc.
    STEP 1 - BOOT_TIME:
    8/12/14 1:58:29.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
    8/12/14 1:58:46.987 PM WindowServer[104]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
    8/12/14 1:58:54.698 PM DMProxy[194]: CGSServiceForDisplayNumber: Invalid display 0x2b2840d0
    8/12/14 2:00:51.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
    8/12/14 2:00:51.000 PM kernel[0]: *** kernel exceeded 500 log message per second limit  -  remaining messages this second discarded ***
    8/12/14 2:01:04.666 PM WindowServer[120]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
    8/12/14 2:01:12.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=254[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
    8/12/14 2:01:13.811 PM WiFiKeychainProxy[237]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
    8/12/14 2:01:20.859 PM NotificationCenter[243]: Failed to mmap file. The file has zero length.
    8/12/14 2:01:23.997 PM com.apple.audio.DriverHelper[279]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
    8/12/14 2:01:27.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
    8/12/14 2:15:33.763 PM quicklookd[2724]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: mp4, UTI: public.mpeg-4, fileType: ???? request size:16 scale: 1
    8/12/14 2:15:39.000 PM kernel[0]: Sandbox: coreaudiod(264) deny file-read-metadata /Library/Audio/Plug-Ins/Components/UVIWorkstationAU.component
    8/12/14 2:42:17.839 PM QuickLookUIHelper[2874]: *** Throwing exception err=-536870174 type=3 PlugInDevice.cpp line 81
    8/12/14 2:42:17.851 PM sandboxd[145]: ([2874]) QuickLookUIHelpe(2874) deny iokit-open com_motu_driver_PCIAudio_UC
    8/12/14 2:53:26.000 PM kernel[0]: firefox (map: 0xffffff803dc844b0) triggered DYLD shared region unnest for map: 0xffffff803dc844b0, region 0x7fff91200000->0x7fff91400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    8/12/14 2:55:19.376 PM plugin-container[2917]: Just logged in, send prefs down to 0 drivers
    8/12/14 2:55:19.376 PM plugin-container[2917]: Adding ConsoleUID 501 to dictionary
    8/12/14 2:55:21.182 PM plugin-container[2917]: CoreText performance note: Client called CTFontCreateWithName() using name "Myriad Pro" and got font with PostScript name "MyriadPro-Regular". For best performance, only use PostScript names when calling this API.
    8/12/14 2:55:32.503 PM com.apple.launchd.peruser.501[200]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 10 seconds
    8/12/14 2:55:32.960 PM plugin-container[2917]: PlugInDevice::~PlugInDevice
    8/12/14 2:55:33.790 PM WindowServer[120]: CGXGetConnectionProperty: Invalid connection 63027
    8/12/14 2:55:33.807 PM com.apple.launchd[1]: (com.apple.MailServiceAgent[2714]) Exited: Killed: 9
    8/12/14 2:55:33.812 PM loginwindow[80]: ERROR | -[Application setAppContext:] | Unable to get PID for context [0,118813]
    8/12/14 2:55:33.814 PM com.apple.launchd[1]: (com.apple.ShareKitHelper[282]) Exited: Killed: 9
    8/12/14 2:55:33.816 PM com.apple.launchd.peruser.501[200]: ([0x0-0x27027].com.apple.AppleSpell[2673]) Exited: Killed: 9
    8/12/14 2:55:33.886 PM Core Sync[373]: NSDistantObject (0x1088026a0) is invalid (no connection)
    8/12/14 2:55:34.305 PM sessionlogoutd[2929]: sessionlogoutd Launched
    8/12/14 2:55:34.314 PM sessionlogoutd[2929]: DEAD_PROCESS: 80 console
    8/12/14 2:55:34.335 PM fseventsd[86]: Events arrived for /Volumes/Mac OS X Install ESD after an unmount request! Re-initializing.
    8/12/14 2:55:34.335 PM fseventsd[86]: creating a dls for /Volumes/Mac OS X Install ESD but it already has one...
    8/12/14 2:55:34.612 PM shutdown[2930]: halt by _coreaudiod:
    8/12/14 2:55:34.000 PM kernel[0]: Kext loading now disabled.
    8/12/14 2:55:34.000 PM kernel[0]: Kext unloading now disabled.
    8/12/14 2:55:34.000 PM kernel[0]: Kext autounloading now disabled.
    8/12/14 2:55:34.000 PM kernel[0]: Kernel requests now disabled.
    8/12/14 2:55:34.612 PM shutdown[2930]: SHUTDOWN_TIME: 1407880534 611700
    8/12/14 2:55:34.625 PM Creative Cloud[252]: XPC error messaging com.apple.IconServicesAgent: Connection invalid
    8/12/14 7:30:33.000 PM bootlog[0]: BOOT_TIME 1407897033 0
    STEP 2 - SYSTEM DIAGNOSTIC REPORT:
    Tue Aug 12 19:30:48 2014
    panic(cpu 0 caller 0xffffff801f8dc24e): Kernel trap at 0xffffff801fc51e48, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff803f930ec0, CR3: 0x0000000022630000, CR4: 0x00000000000206e0
    RAX: 0xffffff803ebc9f80, RBX: 0x0000000000000070, RCX: 0xffffff801ff034d0, RDX: 0xffffff803f915588
    RSP: 0xffffff81c98d3c10, RBP: 0xffffff81c98d3c40, RSI: 0x0000000000010002, RDI: 0x0000000000000001
    R8:  0x0000000000000000, R9:  0x0000000000000039, R10: 0xffffff801ff03770, R11: 0x0000007e3672c41b
    R12: 0xffffff801ff034d0, R13: 0xffffff803f8dc2c0, R14: 0xffffff803f915580, R15: 0xffffff803f930ec0
    RFL: 0x0000000000010286, RIP: 0xffffff801fc51e48, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffff803f930ec0, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81c98d38a0 : 0xffffff801f822f79
    0xffffff81c98d3920 : 0xffffff801f8dc24e
    0xffffff81c98d3af0 : 0xffffff801f8f3746
    0xffffff81c98d3b10 : 0xffffff801fc51e48
    0xffffff81c98d3c40 : 0xffffff801fc8bffe
    0xffffff81c98d3c80 : 0xffffff801fc8c1fd
    0xffffff81c98d3cb0 : 0xffffff7fa01e49aa
    0xffffff81c98d3ce0 : 0xffffff7fa01e48dc
    0xffffff81c98d3d10 : 0xffffff7fa0144068
    0xffffff81c98d3d70 : 0xffffff7fa0142c85
    0xffffff81c98d3da0 : 0xffffff7fa0141646
    0xffffff81c98d3dd0 : 0xffffff7fa01bfc43
    0xffffff81c98d3e20 : 0xffffff7fa0140b8b
    0xffffff81c98d3e50 : 0xffffff801fc956ef
    0xffffff81c98d3ea0 : 0xffffff801fc952af
    0xffffff81c98d3f30 : 0xffffff801fc90e89
    0xffffff81c98d3f70 : 0xffffff801fc95e03
    0xffffff81c98d3fb0 : 0xffffff801f8d7417
          Kernel Extensions in backtrace:
             com.apple.iokit.IOAudioFamily(1.9.7f2)[092DA230-DD20-3369-A32B-E162A496C638]@0x ffffff7fa013d000->0xffffff7fa016bfff
                dependency: com.apple.kext.OSvKernDSPLib(1.14)[7C60EDB3-7527-3412-B424-C9A667A65B92]@0xffff ff7fa012b000
             com.motu.driver.PCIAudio(1.6)[00000000-0000-0000-0000-000000000000]@0xffffff7fa 01be000->0xffffff7fa0223fff
                dependency: com.apple.iokit.IOAudioFamily(1.9.7fc2)[092DA230-DD20-3369-A32B-E162A496C638]@0 xffffff7fa013d000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f9febe000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
    Kernel slide:     0x000000001f600000
    Kernel text base: 0xffffff801f800000
    System model name: MacPro5,1 (Mac-F221BEC8)
    System uptime in nanoseconds: 26153387208
    last loaded kext at 18269508545: com.apple.driver.AppleMikeyHIDDriver    124 (addr 0xffffff7fa10fa000, size 20480)
    loaded kexts:
    com.Cycling74.driver.Soundflower    1.5.1
    com.motu.driver.PCIAudio    1.6 58373
    com.apple.driver.AppleMikeyHIDDriver    124
    com.apple.driver.AppleMikeyDriver    2.6.3f4
    com.apple.driver.AppleHDAHardwareConfigDriver    2.6.3f4
    com.apple.driver.AppleHDA    2.6.3f4
    com.apple.driver.AudioAUUC    1.60
    com.apple.driver.AppleUpstreamUserClient    3.5.13
    com.apple.driver.AppleMCCSControl    1.2.5
    com.apple.kext.AMDFramebuffer    1.2.4
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.iokit.IOBluetoothUSBDFU    4.2.6f1
    com.apple.AMDRadeonX3000    1.2.4
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.6f1
    com.apple.driver.AppleHWAccess    1
    com.apple.driver.AppleLPC    1.7.0
    com.apple.kext.AMD5000Controller    1.2.4
    com.apple.driver.AppleIntelMCEReporter    104
    com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.6.0
    com.apple.iokit.SCSITaskUserClient    3.6.6
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    35
    com.apple.driver.AppleUSBHub    683.4.0
    com.apple.driver.AppleFWOHCI    5.0.2
    com.apple.driver.Intel82574L    2.6.2b1
    com.apple.driver.AirPort.Brcm4331    700.20.22
    com.apple.driver.AppleAHCIPort    3.0.5
    com.apple.driver.AppleUSBEHCI    660.4.0
    com.apple.driver.AppleUSBUHCI    656.4.1
    com.apple.driver.AppleRTC    2.0
    com.apple.driver.AppleHPET    1.8
    com.apple.driver.AppleACPIButtons    2.0
    com.apple.driver.AppleSMBIOS    2.1
    com.apple.driver.AppleACPIEC    2.0
    com.apple.driver.AppleAPIC    1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient    217.92.1
    com.apple.nke.applicationfirewall    153
    com.apple.security.quarantine    3
    com.apple.driver.AppleIntelCPUPowerManagement    217.92.1
    com.apple.driver.DspFuncLib    2.6.3f4
    com.apple.vecLib.kext    1.0.0
    com.apple.iokit.IOSurface    91.1
    com.apple.iokit.IONDRVSupport    2.4.1
    com.apple.iokit.IOBluetoothFamily    4.2.6f1
    com.apple.iokit.IOAcceleratorFamily    98.22
    com.apple.driver.AppleSMBusController    1.0.12d1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.6f1
    com.apple.driver.AppleHDAController    2.6.3f4
    com.apple.iokit.IOHDAFamily    2.6.3f4
    com.apple.iokit.IOFireWireIP    2.2.6
    com.apple.driver.AppleSMBusPCI    1.0.12d1
    com.apple.iokit.IOAudioFamily    1.9.7fc2
    com.apple.kext.OSvKernDSPLib    1.14
    com.apple.kext.AMDSupport    1.2.4
    com.apple.AppleGraphicsDeviceControl    3.6.22
    com.apple.iokit.IOGraphicsFamily    2.4.1
    com.apple.driver.AppleSMC    3.1.8
    com.apple.driver.IOPlatformPluginLegacy    1.0.0
    com.apple.driver.IOPlatformPluginFamily    5.7.1d6
    com.apple.driver.AppleUSBHIDKeyboard    170.15
    com.apple.driver.AppleHIDKeyboard    170.15
    com.apple.iokit.IOUSBHIDDriver    660.4.0
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.6.6
    com.apple.iokit.IOUSBMassStorageClass    3.6.0
    com.apple.driver.AppleUSBMergeNub    650.4.0
    com.apple.driver.AppleUSBComposite    656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.6
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.6
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IOUSBUserClient    660.4.2
    com.apple.iokit.IO80211Family    640.36
    com.apple.iokit.IONetworkingFamily    3.2
    com.apple.iokit.IOAHCIFamily    2.6.5
    com.apple.iokit.IOUSBFamily    683.4.0
    com.apple.driver.AppleEFINVRAM    2.0
    com.apple.driver.AppleEFIRuntime    2.0
    com.apple.iokit.IOHIDFamily    2.0.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    278.11.1
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.AppleKeyStore    2
    com.apple.driver.DiskImages    371.1
    com.apple.iokit.IOStorageFamily    1.9
    com.apple.iokit.IOReportFamily    23
    com.apple.driver.AppleFDEKeyStore    28.30
    com.apple.driver.AppleACPIPlatform    2.0
    com.apple.iokit.IOPCIFamily    2.9
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    com.apple.kec.pthread    1

  • The install failed

    hi, i encountered this error when installing Kaspersky Internet Security 2014 error : The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.). Please help me

    Stay away from Kaspersky - it's known to cause problems on Macs.
    If you feel as if you must have some sort of AV software on your machine, try Sophos for Mac - it's free and I tested it for about 7 months and found that it worked just fine with interfering with my machine. But PLEASE NOTE that I had a number of kernel panics using it running Mavericks (10.9).
    Clinton

Maybe you are looking for

  • I recently installes windows on my macbook pro but when i boot up it shows blank black screen.please help me in fixing this problem

    i recently installed windows 7(ultimate) on my 13 inch macbook pro.Everything was installed correcly and window also workd correctly in the first run,but when i shutdown the mac and booted again after some time it showd blank and screen. PLEASE help

  • Client 10.1.0.3.0 Vs Runtime Service 10.1.0.2.0

    My Owb client run on a Win32 box, the Runtime Service run on a Linux ( Suse ) box. The client is patched with release 10.1.0.3.0 but I cannot find the same patch for linux platforms, so when I try to deploy my project on the Runtime repository the OW

  • Digitasl Signature in Word not retained in PDF

    Word 2010 Acrobat X 10.1.9 A PDF generated from a Word document with multiple digital signatures does not display one of the signatures in the PDF output when using the Acrobat toolbar. Three on the previous page display and one of two on the next pa

  • LSO Content Server URL

    Dear SAP Gurrus we are trying to connect LSO with content server repository instead of portal KM .we installed content server 6.40 and connected with ECC and wand create one repository Z_lso via csadmin and oac0 please tell me how do i know and where

  • Unable to connect Win 7 and Win XP PCs in a Workgroup

    I am trying to connect new (newer) Win 7 Pro PCs to a Workgroup of all Win XP Pro PCs. The Win 7 PCs can see each other and the Router. The XP PCs can see each other. The Win 7 PCs are 64 Bit. They are on a separate subnet (192.168.2.xxx) from the XP