Instal;ling final cut pro version 5.1

Does any one know how to stall Final Cut Studio v 5.1 on a OS X 10.9.2. It was orginally made for a 10.7 or 10.6. when I put the installation disk in it just spits it out without opening or reading anything. please help

When the drive just spits the disc back out, it's a "read" problem. Final Cut Studio v 5.1is a U/B so it should have no problem installing on a new Mac, but only if the disc will remain in the drive.
Does it spit out anything else, or just this one disc?

Similar Messages

  • What version of Quicktime is best for Final Cut Pro version 6.0.5?

    Hello,
    Could anyone tell me what version of Quicktime works best with Final Cut Pro version 6.0.5? Currently I have QT version 7.6.2.
    Unfortunately, all the clips are digitizing at 640 x 480 instead of 720 x 480 (I have trashed prefs and checked the sequence settings and Easy Setup, both are set at NTSC 720 x 480). I have also completely re-installed FCP from the original disks.
    When I digitize a clip, it digitizes at 640 x 480. When I open the clip itself and look at the properties, the "Presentation" is set to "Clean" (640 x 480) instead of "Classic" (720 x 480). It keeps defaulting to Clean, and therefore digitizing at 640x480.
    Should I uninstall QT and go back to an earlier version? If so, which one would be best? Or is there an easier way to solve this problem?
    Thank you in advance for any help. I've been struggling with this problem for over a week.

    unfortunately, all the clips are digitizing at 640 x 480 instead of 720 x 480 (I have trashed prefs and checked the sequence settings and Easy Setup, both are set at NTSC 720 x 480).<</div>
    You list Sequence settings and Easy Setup, but is there any chance your Capture Preset somehow got tweaked to NTSC 4x3 (640x480), instead of it's normal setting of DV NTSC 3x2 (720x480)
    From the extent of troubleshooting steps you've taken, this would be unlikely, but heck your Capture Preset and make sure it's correct.

  • How to I get a folder to open up in Final Cut Pro version 6 thats off my desktop?

    How do I get a folder to open up in Final Cut Pro version 6.  I'm on a MAC OS X Version 10.6.8.  The movie folders I imported on my desktop from a Lacie Rugged Triple external hard drive.   When I try to import the folder a pop up comes up that says, "ERROR: No translatin templates matching the selected XML file were found.  Unable to import this file."   When I try and drag the folder into Final Cut a pop up comes up that reads "Please choose a translation document file".  What should I do or what am I not doing? 
    Cliff

    YYou should ask this question on the Final Cut Studio forum.

  • Final Cut Studio Pro 2 Install - Skip Final Cut Pro itself - TT_NEWALREADYI

    Dear All,
    I hope you can help. I have just bought a new Macbook Pro 2.4 GHz Intel Core 2 Duo with 4GB RAM, with OS X 10.4.10 running. It came with iLife 08.
    I installed Logic Studio 8 (which was successful), and have been trying to install my copy of Final Cut Studio 2. When I run the installation, the options appear for custom install, but FInal Cut Pro, Compressor and QMaster are greyed out, and the action identified for them is "skip. If I rest the mouse over any of the options the text TT_NEWERALREADYINSTALLED appears.
    I have tried uninstalling the Logic Studio components with AppZapper, and retrying the install of Final Cut Studio, but no matter what I try to do, it won't install Final Cut Pro.
    Can anybody help?
    Kind Regards,
    Nick.

    http://docs.info.apple.com/article.html?artnum=306567
    -DH

  • Final cut pro version 4.0.1 is supported on which version of Mac

    I want to know
    final cut pro version 4.0.1 is supported on which version of Mac.
    Which compressor should I use with this Final Cut Pro version.

    FCP 4.0 was the most unstable version of FCP out there. I highly recommend not using it. SO much wrong with it that I can't list it all. BUT, it only supported DV and offline RT (low res format), and then uncompressed SD and Uncompressed HD (need supporting hardware). It ran on Mac OS 10.2 and 10.3...last supported OS was 10.3. It didn't come with Compressor. Compressor was made years after that version of FCP.
    Shane

  • Final Cut Pro version 5.0.4

    Hello Everyone:
    I have a question for you:
    Do you know if I can use Final Cut Pro version 5.0.4 to capture the files (video) that was shot with the new Sony HVR-Z7E video camera.
    Thanks
    Damon

    Should be able to. This looks like a standard HDV camera.

  • Final Cut Pro version 10.1.1 won't open.

    Hi All. My Final Cut Pro version 10.1.1 won't open at all. I am on mavericks. Having read quite a few threads, I have trashed preferences and also reinstalled the software but no joy. The screen flashes up with "Final Cut Pro can't be opened - error -1712" Any help would be appreciated. Thanks!

    cjstuartsmith wrote:
    I can never get past the stage of the Final Cut App logo bouncing on my desktop. The only options I have available is to force quit as the "application is not responding" 
    It's possible the alias in the Dock is corrupted.
    Drag that icon off the Dock and let it go on a blank area of the Deasktop. Poof, it should be gone.
    Go to the Applications folder and drag the FCP X icon into the Dock or start FCP X from the Application folder.
    Trashing the Preferences as suggested may help.
    Also use Disc Utitlity and repair permissions.
    Al

  • Will the new final cut pro x work with my Final cut pro version 6.0.6 data

    will the new final cut pro x work with my Final cut pro version 6.0.6 data

    Thanks Tom.
    So I will need  upgrade to FCP 7 first, then convert to an XML file in 6.0.6, then convert to another file that FCP X can read? I have a lot of half done projects that need finishing. Is this process very complex and time consuming?
    Maybe I should be approaching this from a different angle. The reason I am asking is that I now need to upgrade to a new Mac book pro and have been told that I cant run final cut pro 6.0.6 on the new models using maverick. Is this true?
    Roger

  • I just did edited a feature using Final Cut Pro Version 7 i want to upgrade to X will the clips i saved on version 7 still be compatibly and usable on X

    I just did edited a feature using Final Cut Pro Version 7 i want to upgrade to X will the clips i saved on version 7 still be compatibly and usable on X

    thanks I was afraid of upgrading to Pro X and having to redigitise all that footage again thx Tom

  • I need to reinstall Final Cut Pro Version 10.1.1 but can't remember the Apple ID I used to install it in 2012.  What can I do?

    For several days, I've been trying to upload Final Cut Pro but keep getting this message "restoring the window layout" but nothing happens.  Not even after 2 hours.  What have I done wrong and how can I redress this problem?

    Open your Home library (not the root library), Application Support/Final Cut Pro/Layouts. Drag the folder to the trash. Npw re-launch the app.
    Just to add…your subject line doesn't seem to  agree with the content of your post. If you can't remember your Apple ID, contact Apple.
    Russ

  • Final Cut Pro version 1 and OS 9 Classic?

    Will my old copy of Final Cut Pro 1 work in the OS 9 Classic environment?
    Has anyone tried this?
    I used to run FCP 1 on a PowerMac G3 and want to run it on my Powerbook G4. I know about the updates to the new versions , but I was wondering if FCP 1 will work in the classic mode.

    Michael, if you can operate classic mode, you probably have os9.2.2 on your machine.
    open preferences and see if you have the option to change the start up os. It's on the bottom somewhere. Boot up in os 9, install FCP and see if it works.
    But whether or not FCP1 will operate in 9.2.2 is a good question. I started with 1.25 and the OS at that time was 9.04 If I remember correctly. You HAD to update to 9.2.2 if you wanted to install FCP3

  • Installation of Final Cut Pro Version 2013 with OSX 10.7.5

    In 2013 I bought Final Cut Pro for my MacBook (version 2007 with OSX 10.7.5). Meanwhile I had to reinstall the hard drive and set-up the MacBook again. As there is now only the latest version available in the AppStore, I cannot install this version 10.1.4 as it is not compatible with my 10.7.5. OSX. Is there any chance to get the version 2013 (June) to install it again? Thanks for support!

    Also take a look at this doc.
    You could install a more recent OS on a separate drive or partition and run a dual boot system.
    Russ

  • Final Cut Pro version 6.0.5 update

    Where can I find Final Cut Pro update version 6.0.5?

    Apple pulls older updates when current ones come out so you are SOL through that venue.
    Perhaps some kind person who downloaded the stand alone installer is willing to share or you can find it on an unofficial mirror site.
    Good luck,
    x

  • Installing multiple final cut pro

    Can someone explain how I could successfully install 12 licensed copies of Final Cut Pro on 12 MBPros?  I was wanting to pay for the software by using one iTunes/App Store account. 

    I don't know anything about the purchase of multiple licenses but once you have downloaded FCP X you can simply copy it across to the other computers as the app is "self-contained" unlike FCP 7.

  • Installing/uninstalling Final Cut Pro X

    I've download Final Cut Pro X from the App Store using a redemption code from a Multiuser license purchased by my employer (a university) and installed it on a lab Mac.  How do I legitimately uninstall it and re-install it on another university Mac ?

    DDid you follow Apple instruction how remove the trial ? Final Cut Pro X: How to remove the Final Cut Pro X Trial - Apple Support

Maybe you are looking for