Instal Oracle9i and Dev Suite on Linux Version?

I'm preparing to install Oracle 9i with the development suite for educational purposes on Linux. Didn't find System Requirements.
Will Red Hat Linux 7.3 Professional work with my oracle configuration?
I hope Linux 7.2 for Itanium is not a requirement.
Thanks in advance.

Hi werner
thnks aging for ur cooperation
I EXECUTED THE COMMAND HERE IS THE OUTPUT
[oracle@oracleserver pkg2]$ Disk1/runInstaller -debug
The OUI Screen may take around 5 to 30 seconds to come up depending upon system performance. Please Wait .......
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, redhat-4, SuSE-8, SuSE-9 or UnitedLinux-1.0
Passed
All installer requirements met.
Checking Temp space: must be greater than 400 MB. Actual 14940 MB Passed
Checking swap space: must be greater than 1536 MB. Actual 2000MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Checking if CPU speed is above 450 MHz. Actual 2793 MHz Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-24_02-06-02PM.
Please wait ...unzip: cannot find ../stage/Components/oracle.swd.jre/1.4.2.0.4/1/DataFiles/*.jar, ../stage/Components/oracle.swd.jre/1.4.2.0.4/1/DataFiles/*.jar.zip or ../stage/Components/oracle.swd.jre/1.4.2.0.4/1/DataFiles/*.jar.ZIP.
No zipfiles found.
Error in writing to directory /tmp/OraInstall2008-04-24_02-06-02PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
pzl help if any
Regard
Farnaw

Similar Messages

Installing oracle dev suite on linux 5.3

Hi team
can some1 help on how to install oracle dev suite on linux i'm gettting an error on
could not ecxecute auto check for display color using command
check if the display variable is set

You need to set the Xpath variable in your putty seesion...i.e X11 forwarding should be enabled.
DISPLAY
Set to the current computer.
Example (C shell):
% setenv DISPLAY
machine1.acme.com:0.0
Example (Bourne, Bash or Korn shell):
$ DISPLAY=machine1.acme.com:0.0;
export DISPLAY

Problem in installaing 10g(10.2.0) dev suit on linux 4EL

hi all
i have completed the RPM installation and required configuration on linux for installing oracle 10g(1.2.0) dev suit on linux but when i run setup it returns error
can anybody help me , I shall be higjly thnkfull bc it is very imp for me.
[root@oracleserver pkg2]# Disk1/runInstaller
The OUI Screen may take around 5 to 30 seconds to come up depending upon system performance. Please Wait .......
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, redhat-4, SuSE-8, SuSE-9 or UnitedLinux-1.0
Passed
All installer requirements met.
Checking Temp space: must be greater than 400 MB. Actual 14942 MB Passed
Checking swap space: must be greater than 1536 MB. Actual 2000MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Checking if CPU speed is above 450 MHz. Actual 2794 MHz Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-24_12-05-25PM. Please wait ...
Error in writing to directory /tmp/OraInstall2008-04-24_12-05-25PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
then i checked spaces
[root@oracleserver pkg2]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda8 22G 5.5G 15G 28% /
none 502M 0 502M 0% /dev/shm
/dev/sda5 15G 2.1G 13G 14% /ddrive
/dev/sda6 20G 8.0G 12G 41% /edrive
/dev/sda7 5.9G 559M 5.4G 10% /fdrive
[root@oracleserver pkg2]# df -h /tmp
Filesystem Size Used Avail Use% Mounted on
/dev/sda8 22G 5.5G 15G 28% /
[root@oracleserver tmp]# ll
drwx------ 2 oracle oinstall 4096 Apr 24 10:44 gconfd-oracle
drwx------ 3 root root 4096 Apr 24 11:30 gconfd-root
drwx------ 2 root root 4096 Apr 24 11:30 keyring-LYfCYY
srwxr-xr-x 1 oracle oinstall 0 Apr 24 10:28 mapping-oracle
srwxr-xr-x 1 root root 0 Apr 24 11:31 mapping-root
drwxrwx--- 3 oracle oinstall 4096 Apr 24 10:36 OraInstall2008-04-24_10-36-30AM
drwxrwx--- 3 oracle oinstall 4096 Apr 24 10:37 OraInstall2008-04-24_10-37-27AM
drwxrwx--- 3 root root 4096 Apr 24 11:31 OraInstall2008-04-24_12-05-25PM.
drwx------ 2 root root 4096 Apr 24 11:32 orbit-root
drwx------ 2 root root 4096 Apr 24 11:30 ssh-ONJshz4863
-rw------- 1 oracle oinstall 0 Apr 22 11:40 t2lGX3GiqC
-rw------- 1 root root 917 Apr 24 11:31 xses-root.GtGWyn
regards
farnaw

Hi werner
thnks aging for ur cooperation
I EXECUTED THE COMMAND HERE IS THE OUTPUT
[oracle@oracleserver pkg2]$ Disk1/runInstaller -debug
The OUI Screen may take around 5 to 30 seconds to come up depending upon system performance. Please Wait .......
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, redhat-4, SuSE-8, SuSE-9 or UnitedLinux-1.0
Passed
All installer requirements met.
Checking Temp space: must be greater than 400 MB. Actual 14940 MB Passed
Checking swap space: must be greater than 1536 MB. Actual 2000MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Checking if CPU speed is above 450 MHz. Actual 2793 MHz Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-04-24_02-06-02PM.
Please wait ...unzip: cannot find ../stage/Components/oracle.swd.jre/1.4.2.0.4/1/DataFiles/*.jar, ../stage/Components/oracle.swd.jre/1.4.2.0.4/1/DataFiles/*.jar.zip or ../stage/Components/oracle.swd.jre/1.4.2.0.4/1/DataFiles/*.jar.ZIP.
No zipfiles found.
Error in writing to directory /tmp/OraInstall2008-04-24_02-06-02PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
pzl help if any
Regard
Farnaw

How to install d2k release 6i on redhat linux version 7.3?

How to install d2k release 6i on redhat linux version 7.3?

have you tried using open motif 2.1.30?
the open motif version that comes with the redhat 7.3 is 2.2 and is not compatible with 6i. Once I used open motif 2.1.30 it worked fine. The environment variable setting is very similar to any other unix version. Ensure that you are also intalling the latest patch (10) for 6i (fixed lots of problems).
regards

Firefox 5 has lost all my chrome tab's and capabilities which came with 4? how do I un install 5 and get back to my version 4?

firefox 5 has lost all my chrome tab's and capabilities which came with FF4? how do I un install 5 and get back to my version 4 & retain all my bookmarks at least I's also like to retrieve my Chrome capabilities as well?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Trying to install update and error message says older version of itunes cannot be removed

trying to install update and error message says older version cannot be removed

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How to install 10 dev suit on linux

Plz help me how can i install forms dev suit 10g on linux 4 El

I might be able to answer if you have a specific question, given I have done this on RH3 (which is my development environment). Have been using on both 6i c/s and 10g iDS on Linux for a while.

Problem in installing oracle 10g dev suit

Hi all
my name is farnaw, i have successfully installed oracle 102 R2 on linux enterprise 4 seccuessfully, know i want to instal oracle 10g developer suit latest version (10.1.2.0.2)
acan any body help me how can i install dev suit, i need any link or steps to install this
Reply will be highly appreciated
With regards
Thnks in advance
farnaw

You can find all the Oracle documentation at http://docs.oracle.com
From there you can browse to the Developer Suite documentation, including the installation guide, at http://download.oracle.com/docs/cd/B25016_07//doc/dl/core.htm

Re-installation of a damaged/partial install of Oracle Dev Suite 10g (9.0.4

Hi
First of apologies if this is the incorrect location to post - I couldn't find a dedicated forum!!
My problem is this......
I have followed Oracle's guidelines and created a silent installation of the full Dev Suite 10g (9.0.4) and have used this many times successfully to install to fully patched Windows XP Pro workstations.
Periodically the installation fails and only partially completes....no problem I naively thought - reinstall.
Initially I tried re-installing over the top of the partial install - but this always fails with the error "You have specified a non-empty directory to install this product...etc"
Oracle's recommended method is to uninstall and then reinstall - except the installer doesn't think anything is installed.
The obvious thing was then to delete all folders and files pertaining to Dev Suite....this also failed with the same message!!
I extended my deletion to temp folders, windows\prefetch and the registry......still fails!!
Frustratingly the java installer doesn't have the force reinstall switch that the windows installer has....gggrrrr...
So I had the mad idea of watching a manual install......this generated the non-empty folder error......so I deleted the folders and hey bisto!! Then I started getting these errors "The value of the environment variable path is more than 1023 characters. This value cannot be set."
I even tried creating a response file against a damaged install.....failed with both of the above errors.
Now I am stuck....if only Oracle used a decent windows installer!!
I did think to check the installation on a virgin build workstation - success....
I really hope someone can help me with this as it's driving me mad!!
Please help
Thanks in advance

Many thanks Sainath.....
This has certainly helped......the limitation appears to be in the java installer......it seems to check whether there is enough space in the Env Var PATH and errors if there is insufficient space.
Of course the installer was written in pre SP2 days when the Env Vars were limited to 1023 characters......todat SP2 allows 2047 characters.
My installation script now temporarily modifies the PATH variable, allows the installation and then returns the PATH variable to its original state and then adds the DevSuite paths.
I can now smile again.
Thanks
Greg

How to install ECC IDES in RED HAT linux version 5

Hai..
I would like to install ECC IDES in linux OS. I dont know Linux. So it is difficult for me to install.
I am having 500 gb HD.and in that 30 GB allocated as NTFS for WinXP.
Left space(470 GB Free) for linux and ECC IDES.
I want to know - how to partition this 470 GB in linux. I dont know which file system should be allocated and how it should be partitioned. I am using RED HAT LINUX Version 5.
i need a step by step process to install red hat linux with proper(file system) partition and
I need a step by step process to install IDES with Linux commands.
Thank You
Regards
R.Thillai Govindarajan

> i need a step by step process to install red hat linux with proper(file system) partition and
> I need a step by step process to install IDES with Linux commands.
Get the official installation guides at
http://service.sap.com/instguides
However, they won't contain "now enter command X and now enter command Y". You will need to have a basic understanding what you are doing before you can install a SAP system (and the database).
Markus

Firefox won't open website(site requires flash player) - my other browsers open it successfully, flash player is installed correctly and up to to date version

Firefox won't open website(site requires flash player) - my other browsers open it successfully, flash player is installed correctly and is the up to to date version, using Firefox 4

Hi there
Sorry, but you aren't in the right place for getting help with this. Try clicking the link below and choose a forum dedicated to Adobe Flash.
Click here
Best of luck to you in resolving your issue! Rick

Unable to install breqn and cadabra on Arch Linux

Hi,
I am running Arch Linux (64-bit) on my Dell XPS 15 laptop. I use LaTeX for all my scientific typesetting. When I was running Fedora on this system earlier, I used Cadabra, an open source symbolic manipulation program suited to calculations in quantum field theory. I tried to install cadabra in Arch using yaourt, but I get the following error message:
[root@krypton ~]# yaourt cadabra
1 aur/cadabra 1.29-1 (2)
Cadabra is a computer algebra system (CAS)
2 aur/modglue 1.16-2 (1)
Modglue library for Cadabra computer algebra system (CAS)
==> Enter n° of packages to be installed (ex: 1 2 3 or 1-3)
==> -------------------------------------------------------
==> 1
==> Downloading cadabra PKGBUILD from AUR...
x PKGBUILD
x cadabra.install
First Submitted: Wed, 16 Sep 2009 08:01:06 +0000
cadabra 1.29-1
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> cadabra dependencies:
- conlie (building from AUR)
- modglue>=1.16 (building from AUR)
- breqn (building from AUR)
==> Edit cadabra.install ? [Y/n] ("A" to abort)
==> -------------------------------------------
==> n
==> Continue building cadabra ? [Y/n]
==> ---------------------------------
==>
==> Building and installing package
==> Install or build missing dependencies for cadabra:
==> Downloading breqn PKGBUILD from AUR...
x breqn.install
x PKGBUILD
First Submitted: Wed, 16 Sep 2009 08:00:09 +0000
breqn 1.2b-2
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> breqn dependencies:
- texlive-bin (already installed)
- texlive-core (already installed)
==> Edit breqn.install ? [Y/n] ("A" to abort)
==> -----------------------------------------
==> n
==> Continue building breqn ? [Y/n]
==> -------------------------------
==>
==> Building and installing package
==> WARNING: Building package as root is dangerous.
Please run yaourt as a non-privileged user.
==> Making package: breqn 1.2b-2 (Thu May 31 20:10:59 IST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Downloading mh.zip...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 2196k 100 2196k 0 0 74677 0 0:00:30 0:00:30 --:--:-- 73748
==> Validating source files with md5sums...
mh.zip ... FAILED
==> ERROR: One or more files did not pass the validity check!
==> ERROR: Makepkg was unable to build breqn.
==> Restart building breqn ? [y/N]
==> ------------------------------
==>
Surprisingly, a search on google did not reveal anything useful. Apparently the problem is validating the package 'breqn' which is a prerequisite for cadabra, but fails to install through yaourt because of some md5 checksum validation error (as I understand). And it seems there is no override for this in yaourt.
Any suggestions to help me get cadabra to work will be greatly appreciated.
Thanks in advance!
References:
1. http://aur.archlinux.org/packages.php?ID=30207
2. http://cadabra.phi-sci.com/
Last edited by darkmav (2012-05-31 14:41:57)

Your problem is that the file the PKGBUILD is downloading is not the same one that the creator of the PKGBUILD was working with.
an md5sum is a hash (a fingerprint, if you will) of the file. When the PKGBUILD was created, that fingerprint was included in the file. That yours does not match means one of two things:
1. The file you downloaded was either corrupt, or has been tampered with, or
2. The file you downloaded has been updated by the author, but the PKGBUILD has not been updated.
If it is case 1, stop. If it is case 2, you can do the following:
The Cadabra PKGBUILD was updated last June (almost a year ago). You can either post a comment to the AUR and see if the maintainer will fix it, or you can fix the PKGBUILD yourself and (hopefully) post the changes back to the AUR as a comment.
# Contributor: Dariusz 'quasi' Panchyrz <[email protected]>
pkgname=cadabra
pkgver=1.29
pkgrel=1
pkgdesc="Cadabra is a computer algebra system (CAS)"
arch=('i686' 'x86_64')
url="http://cadabra.phi-sci.com/"
license=('GPL')
depends=('conlie' 'modglue>=1.16' 'breqn')
install=$pkgname.install
source=(http://cadabra.phi-sci.com/$pkgname-$pkgver.tar.gz)
md5sums=('ea6e64535e6a9abe8810e5baa6a579a8')
build() {
cd $startdir/src/$pkgname-$pkgver/
./configure --prefix=$startdir/pkg/usr/
make || return 1
make install || return 1
Notice the md5sums entry in the PKGBUILD above. It needs to be updated in accordance with this article and then built on your machine using makepkg. I strongly suggest you not user a helper for this, but rather use the methods described here
Last edited by ewaller (2012-05-31 15:09:09)

Hi I am getting below error while installing db 10.2.0.2/linux version

[oracle@localhost database]$ ./runInstaller
./runInstaller: line 56: /home/oracle/software/database/install/.oui: cannot execute binary file
Please suggest how to get rid of this?

You say you downloaded 10202_zlinux, is IBM Linux on System z really your OS and platform? Not impossible,of course,but most Linux systems run on x86. Since it's not a old bash version, I think you have the wrong software.
Werner

How to install GCC and DKMS on Oracle Linux?

Hello,
I am a newbie to Oracle Linux. I installed Oracle Linux on a virtual machine using Oracle VirtualBox. Now I need to install the packages DKMS and GCC in order to share drives between the host and the ghost.
Here is what is happening:
# yum install dkms
Setting up Install Process
Setting up repositories
No Repositories Available to Set Up
Reading repository metadata in from local files
Parsing paskage install arguments
No Match for afgument: dkms
Nothing to do
Please, advice what to do.
Thanks in advance.

Here is what you need to install under Oracle Linux or Red Hat Enterprise Linux to install the VirtualBox Guest Additions:
<pre>yum -y install gcc kernel-uek-devel-$(uname -r)</pre>
The packages are available from the Oracle public yum repository as already mentioned, or on the installation DVD in the server directory.

How can I tell if Adobe Flash is installed properly and upto date version?

How can I tell if Adobe Flash is installed properly and upto date version?
Hi Guys and girls, hopefully an easy question for you.
I installed Adobe flash and lightsource last night, cos I needed it to run Weebly website maker.
Anyone know if Weebly runs correctly on 10.9.1??
I have a new comp, so no previous version of flash on here, I am running OSX 10.9.1
I just want to know How I can tell if Adobe Flash is installed properly and is the upto date version?
Where do I go in the comp to find out,
If I type in Adobe flash into search it only brings up flash manager, when I click this it is an uninstaller program.
Lightsource shows in finder apps.
If I type in flash player it shows up in plugins with a version number see screen shot.
Where would I go to check for updates for things like flash on my comp?
Thanks Team,
Jason in oz. :?):)

1. Safari > Preferences > Security > Internet Plug-ins
Allow Plug-ins
2. Go to this Adobe site to check. You will see the animation above the tree.
How to know whether AdobeFlash Player is installed
http://helpx.adobe.com/flash-player.html?promoid=ISMRY

Instal Oracle9i and Dev Suite on Linux Version?

Similar Messages

Maybe you are looking for