Instal OS 10.4 trough target disk mode

Hello, this is my first question here.
I am trying to install os 10.4 on a computer with no DVD player using the target disk mode as described in de apple website. I have connected a computer with DVD player in target mode to the computer with only te cd player, but only the hard disk of the computer in target disk mode appears on the desktop, not the DVD
Is the any way to get this to appear?
Thanks

Welcome to Apple Discussions!
Make sure you are using the Tiger retail disc which looks like this picture
It doesn't always work right, and if you have trouble, I strongly recommend getting an external DVD drive that can boot Mac OS X such as those sold by http://www.macsales.com/ or http://www.lacie.com/ or get the Tiger Media Exchange program that gives you CD version on http://www.apple.com/befr/macosx/mediaexchange/

Similar Messages

Clean install of OS Lion after Target disk mode transfer

Not sure if this is the right community to ask this in but if you could help me I'd appreciate it.
I have a iMac 5 1, duo core 2 duo with 3 1/2 gigs of RAM. I recently did a targe disk mode transfer of files and folders from my mac book laptop. Mostly because I wanted the software (Creative suite, capture one, etc ...) My computer has slowed down noticeably since then. But what worries me more is the possibility that as a result of the target disk mode I copied a lot of "junk", like .plists scripts that either don't work or don't need to be running, or junk on my local storage. I tried my best to clean off a lot of this stuff, and even did a repair disk permisions (there were a lot of permissions that needed to be repaired quite naturally). Well anyway I bought the 10.7.4 Lion upgrade from the app store. I'm wondering, would it benefit me to do a "clean" install either by partitioning my disk or using a bootable USB. Or an erase and install. Will doing either erase my software and will doing it clean out my HD at all.
Thanks.

Please note that your 3 GB of RAM is not going to result in a good experience with Lion as it is a bit of a memory hog and 4 GB is a realistic minimum.
As for copying your applications from one Mac to another: have you made sure that they are compatible? And, do they require more RAM than what you have? Using something like Creative Suite, I would suggest more than 4 GB RAM.
I don't know which version you have, but here are the requirements for v. 6:
http://www.adobe.com/products/creativesuite/mastercollection/tech-specs.html
(Note: 8 GB RAM recommended)

Unable to Install via Firewire Target Disk Mode

I'm having problems with installing Leopard 10.5 via Target Disk Mode. The 2 Macs I am using are a eMac 1.0GHz with 1GB RAM Running OS X 10.4.11 and a PowerMac QuickSilver 933MHz 896MB RAM Running OS X Server 10.4.11.
The eMac's Combo Drive has gone south and won't read DVDs so I am putting the install DVD into the QuickSilver. If I start the QuickSilver in Target Mode I only see the QuickSilver's harddrive on the eMac and can't access the install DVD. If I put the eMac in Target Mode and boot up the QuickSilver using the Install DVD after I get through the language selection it says the QuickSilver isn't capable of installing it.
Any suggestions would be helpful.
Thanks

Then, you're out of luck if the QS can't run Leopard. My G4 does. You might look at
http://www.macosxhints.com/article.php?story=20071214143723301
http://www.tidbits.com/webx?14@@.3cb6ddd5/5 and
http://forums.macrumors.com/showthread.php?t=371302
to see how you can work around it. Alternatively, use another machine or ext burner to boot the eMac with the DVD. With the QS in TDM, only the master disk is available.

Installing Leopard from a PowerPC mac to an Intel mac via Target Disk mode

I've just purchased Leopard, but thanks to the common and very annoying faulty MacBook Pro disk drive, I cannot even read the DVD, much less install from it. Before, the disk drive error never affected purchased DVDs, only the ability to read and burn to empty DVDs, but now, apparently, I can't even read Apples own disks.
As the new system disk is Universal, would it be possible to start the installer form the cd on my sister's PowerPC mac (12' Powerbook), and install the system on my MacBook Pro's harddrive, mounted as a firewire drive, or would the installer automatically choose the PowerPC version, since it is launched on a PowerPC computer?
And, if so, is there any way to tell the installer to install the Intel version of Leopard if I run it on a PowerPC computer?

well, looks like I'll have to install Leopard through the Firewire Target Disk mode as my MacBook can't read the DVD. I would appreciate if someone could review the steps below to let me know if I am on the right track. The MacBook is the computer on which I want to load 10.5 and the iMac G5 (PowerPC chip) is the computer on which I will insert the DVD.
- First question: Am I correct (see above) in saying that the MacBook is the Target computer?
- Insert DVD in Host computer
- Connect Target to Host using FW cable
- Turn on Target computer press and hold T to launch in target mode
- select DVD drive from disk options
- this is where I get fuzzy, would I simply click the Install icon? And then what? Will the MacBook know to reboot in Target Mode or do I have to hold down T again?
- anything else I am missing?
Thanks.

Can I Erase/Install In Target Disk Mode?

I need to reinstall my Mac OS on my 13" MacBook Pro (Early 2011) but I'm having some issues. This began after a restart and I got the grey Apple Hardware Test Screen. The tests ran, and my hardware "appears to be OK". I haven't been able to start successfully in any of the ways that I normally would.
When I try to start from my hard drive, I get the Apple Logo and a progress bar. The progress bar goes about a third of the way and then my machine turns itself off. Doesn't matter if I hold down the shift key to start in safe mode.
When I try to start from my Mac OS X Snow Leopard CD I get the Apple Logo screen then a black box stating "You need to restart your computer" etc.
When I boot the hard drive in Target Disk Mode, I'm told Disk Utilities can't repair my disk, and I'll have to format my Hard Drive. (Hardly a surprise given the above)
I have the original disks that came with my computer and Mac OS Snow Leopard. I was going to install the OS using the original disks then update to Mac OS Snow Leopard. This leads me to three questions:
Can I erase/install the OS while in Target Disk Mode by inserting the Mac OS CDs into my desktop then selecting my laptop as the disk to install on.
Because I can still access all of the contents of my hard drive in Target Disk Mode, should I just drag and drop everything into the external hard drive I just bought or is there some sort of disk image-y something or other I should be creating. If so, how do I create the Disk Image?
In all likely hood is my internal hard drive just dead?

Easy solution is this: Computers that can be upgraded to use OS X Internet Recovery. Update your firmware if needed. Then:
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
To answer the question about Target Disk Mode, the answer is if you can connect two Macs that both have Firewire ports, then you can treat your MBP to TDM so its drive will mount on the other Mac's Desktop. If you can boot the other drive from your Leopard disc, then you can do a clean install of Leopard on your MBP from the other computer.

Help: Windows XP on MacBook Pro Boot Camp Partition via Target Disk Mode

Firstly, let me lay out my situation. I have an old MacBook Pro (2,2) with a broken disk drive. It was dropped in its youth and can no longer read from or write to CDs or DVDs of any kind. I have just recently bought a new MacBook Pro to replace it (6,2) and am currently trying to convert the old computer into an XP machine through Boot Camp. I'd like to be able to do so without having to buy an external disk drive.
After a clean install of OS X (10.6.3) onto the old machine, I successfully partition 85GB of space (although I previously attempted the same with a 32GB file system to no avail as well) for XP to be installed upon. Because I cannot boot my XP install disk directly from the broken disk drive, I then close Boot Camp Assistant and shut down the computer. I start it up in Target Disk Mode to be accessed from the new MacBook (6,2).
Once the old MacBook is connected, I insert my XP install disk into the new MacBook (6,2) and boot from the disk. After allowing the XP (Professional) boot to load the install files, I arrow-key down to my 85GB partition (FAT32, named standard as "BOOTCAMP") on the old MacBook (2,2)'s hard drive and select it as the partition I would like to install to. This is where I am directed to a new boot window that tells me in a series of paragraphs that the XP installer cannot reach the selected partition for what seems to be a number of reasons. What it seems to be trying to say to me is that it cannot do a remote install of XP on a Target Disk Mode-connected machine, while not "knowing" that I am trying to do so. It's a similar message to the one that Boot Camp Assistant shows when one tries to create a Boot Camp partition on a machine that is being accessed via Target Disk Mode (Apple puts it much more clearly than Microsoft).
I'd be perfectly content, albiet slightly vexed, to conclude here that it is not possible, shuttle over to the nearest Best Buy, and purchase an external disk drive if it weren't for one thing: I tried the same thing two weeks ago with Ubuntu 10.10 and it installed perfectly on the Boot Camp partition I had created then (I have since wiped all and installed OS X cleanly on the laptop).
Here comes the point/questions:
If the Ubuntu boot disk can access the partition, why can't the XP boot disk?
Is there some way to convince the boot system that the drive is local, rather than being accessed via Target Disk Mode?
Is there an easy solution that doesn't even require that, and will allow me to install to the disk over a firewire connection?
If anyone's knowledgeable and/or brave enough to tackle this one, I'll be eternally grateful. Heck, I'll be grateful if anyone even attempts to tackle it.
Thanks,
-Alec Page

Windows XP will only install from the optical drive. Target Disk Mode does not work with Windows volumes. Windows will not install from any external device.

Flashing Question Mark Folder after Clean Install in Target Disk Mode

I have an old iBook G4 with a failing optical drive and the need to reformat the hard drive and re-install OS 10.5.4. Since the optical drive is failing and unpredictable, I figured I'd do everything in target disk mode.
So I mounted the hard drive of the iBook to my Mac Pro via Firewire in target disk mode. I was able to successfully format the hard drive of the iBook, zeroing out all the data with 7 passes, and I was also able to successfully install OS 10.5.4 from my original Install DVD, again in target disk mode.
After the install was complete, I went through all the registration process and User Account setup and the iBook booted fine albeit still in target disk mode. So I shut down the Mac Pro, turned off the iBook and unplugged the Firewire cable. My Mac Pro booted up just fine afterward. But the iBook now gives me the flashing question mark/finder folder.
I know this means that the iBook is having trouble located a startup volume, or that the startup volume is corrupt or missing data. How can this be, though, after a reformat and clean install? Did I do something wrong in target disk mode? Or did I neglect to do something necessary?
Thanks for anyone's help on this.

Thanks, Niel.
I don't see APM as an option in Disk Utility when booting from my Mac Pro. I only have Mac OS Extended (Journaled), Mac OS Extended, Mac OS Extended (Case-sensitive, Journaled), Mac OS Extended (Case-sensitive), MS-DOS (FAT) and ExFAT.
How do I get my Mac Pro to repartition the iBook properly in target disk mode?

How-To: Install Bundled Apps to another MacBook Pro using Target Disk Mode

Recently, I replaced the dead hard drive on my wife's computer. All the data was previously backed-up so all I needed to do was reinstall the original OS. Oops! Those disks disappeared over two years ago...perfect, right? No poblem, I already had the boxed install DVD for Snow Leopard and installed the core OS. But what about those bundled applications? Aha! That is the marketing coup Apple doesn't really talk much about. You see, you get the entire suite of Apple branded apps with the original install disks but not with a boxed OS install disk. It's just something that you have to find out for yourself...the hard way.
My requirement: restore all the iPhoto data to the reimaged machine running Snow Leopard. But that data has no application that can read it. Solution - Reinstall iPhoto from another source.
So I developed this workaround I hope the rest of you find amusingly simple, wildly helpful
Here's how I restored iPhoto on my wife's computer:
1) Get two Laptops side by side. In our case we both have macbook pro 2008 computers (Wife's and Mine)
2) Power both down and direct connect a firewire 400 cable (or 800 if you have it) between the two
3) Start the Wife's laptop in Target Disk Mode: Press "T" immediately after engagin the power button, hold it down until you see the "fanned" firewire symbol floating across a grey screen - it's quite large, about the size of your hand making a "stop" gesture
4) No start the Mine laptop by pressing the "option" key (two keys to the left of the space bar)
5) You will presented with a pair of hard disks to boot from, choose the Wife's laptop hard drive
5a) you'll notice now that the Mine laptop is booting the OS system files of the Wife's laptop (Her desktop, her preferences, etc...)
6) On the Mine laptop, insert the original Mac OS Install Disk (#1) that came with the Mine laptop (usually any OEM install disk will work, though)
7) Double-click on the DVD icon on the desktop when it mounts and look for a shortcut that reads, "Install Bundled Applications Only"...launch it
8) Now choose install bundled applications but make sure to press the "Customize" button in order to specifically choose which OEM software you want. In our case, just iPhoto
9) Follow the installer prompts all the through to completion and exit (you will be prompted to insert disk #2 along the way).
10) Remove the install disks, power down
11) Power down the Wife's laptop too
12) Disconnect the Firewire cables from both laptops
13) Power up the Wife's laptop normally
14) Launch the FInder and drill down to Applications. Look for iPhoto and launch it
15) iPhoto will either pickup the "iPhoto Library" that was previously restored after reimaging with Snow Leopard or you may be prompted to manually associate a library with iPhoto.
16) Once complete, you'll se all the restored pictures and data from when before the original hard drive crashed. Wife will be pleased and you'll look like a Genius
This is a really handy trick for troubleshooting a lot of install and restore related issues.
Hopefully you'll find other uses for it too.
Good Luck,
TheHighSierras

I think the problem is that you can't install an older OS X version onto a system running a newer OS X version. So I would try the following:
     1. have an external disk or create another partition on an internal drive to use for the Mountain Lion install (you might have to shrink an existing partition to make room for another)
     2. Create an external bootable USB thumb drive with the Mountain Lion OS on it (do a search on the web for this - for example see http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
     3. Reboot Yosemite and then boot from the USB thumb drive by holding down the option key
     4. run the mountain lion installer and install on the new disk/partition you created in step 1 - it will also create another recovery partition from this same part of the disk
Now your Mac system will have both a Mountain Lion install as well as the Yosemite install. You won't be able to use Migration Assistant to move things from Yosemite to Mountain Lion because it will see that you're "going backwards" and won't allow you to.
Have a good backup of everything before starting in case there are problems.
Good luck...

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Can you install tiger on a power mac g4 with out a DVD drive if so how, I do have have a 2011 iMac can I use that in target disk mode with a FireWire cable any help would be appreciated

Hello,
You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
http://support.apple.com/kb/HT1661
Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

Can I install FROM a working iMac TO an iMac in Target Disk Mode?

Hi.
I have a distressed iMac - it's in Target Disk Mode (the Firewire logo is on its screen), and it's hooked up to another iMac. I can see and navigate to the distressed Mac's hard drive via the good one. Can I insert the SL install disk on the good mac and install it on the bad one? I've tried the other way...but the distressed iMac stalls out when booting the install disk visa-versa.
The distressed iMac's internal optical drive is dead, and for some reason it WILL NOT recognized an external firewire/usb optical drive.
Thanks.

Sure, the working mac should see the other one as a firewire connected hard drive, nothing more - so long as the working one is an intel, and the target drive is partitioned suitably; 10.6 ought to install no problem.

Need Help Installing Snow Leopard onto a blank HD via Target Disk Mode

Hey everyone.
Recently I had the HD on my Black Macbook crash due to a mechanical failure. I have just purchased a new Hard Drive for my Macbook. It is completely blank other than the fact that I connected it to my girlfriend's White Macbook earlier today to create 2 partitions. I have a new copy of Snow Leopard that I want to install on it and was hoping someone could guide me through the process.
What I have with me as of now is:
One Black Macbook (UK bought) w/ Partitioned Blank HD and a non-functional Superdrive
One White Macbook (US bought) running Tiger w/ working Superdrive that mounts the SL DVD
FireWire Cable
New Snow Leopard DVD
My first attempt at this failed. I connected the two Macs with the FW cable and started up the Black Macbook in Target Disk mode. Both my HD partitions showed up on the White Macbook. I inserted the SL DVD into the White Macbook and when it mounted I clicked on install. Of course, now it thinks that I want to install SL on the White Macbook whereas I want to install it on the Black Macbook.
I'm a college student without a working computer and with my finals coming up, I'm in deep trouble. I want to mention that my Black Macbook's Superdrive spits out _everything except for Movie DVDs and My Leopard Startup Disk._ It spins the SL DVD for a few seconds and spits it out as well. I'm wondering whether this might be an issue with the DVD region code on the SL DVD though I don't think that's it. My region code is currently set to Region 1 (US) where I purchased the Snow Leopard DVD off Amazon. I initially thought there was a problem with the DVD and CD lens in the drive and I bought a DVD/CD Lens Cleaner CD but I can't run it because the Superdrive spits that out too. I'm out of warranty on the Black Macbook so fixing the Superdrive is pretty much out of the question. I was under the impression that I would be able to install SL via Target Disk Mode without any hassles but boy was I ever so wrong.
Is there any way that I can do this? I'm hoping someone here can help me out. Please do if you find the time to.

By other computer, do you mean the White Macbook? So I should basically put the SL DVD in the White Macbook, restart with the C key held down? Is that right?
Please pardon me if I'm being stupid.

Installing over Target Disk Mode using Grey (OEM-type) Discs

I have a set of Tiger grey install discs labeled for use with a Power Mac G5. I would like to use them to upgrade our eMac, but they obviously don't allow this. I have some family who own a G5, and was wondering if it would be possible to connect the eMac to their computer under Target Disk Mode, then install on the eMac by running the installation on the G5. Anyone have any experience trying something smilar?
I know some will probably say doing this would be a violation of the EULA, but I have looked through the license agreement that came with the discs and haven't seen anything that would prohibit such an installation. It is my understanding that starting with version 10.4.4 of OS X, Apple added a clause to the EULA stating that the grey install discs were only permitted for use with the computer they originally shipped with, but prior to this there were no such prohibitions (these discs are labelled as version 10.4.2).
Thanks for any help

Hi sjpetrick, and a warm welcome to the forums!
Physically that would work to install, BUT whether the iMac will Boot/Run thinking it's a G5 is questionable, and even if it does boot, It won't have some needed drivers for the eMac.

Firewire target disk mode install leopard

Does anyone know if it is possible to install Leo via dvd to another computer booted in target disk mode?
My work computer somehow lost some important OS files during an system update, and now I can't get past single user mode, nor can I seem to boot from CD (although I haven't tried in awhile, may not have had a bootable disk at the time). What I want to do is wipe the HDD, and install the OS.

Leopard OS Disks are universal (ppc and intel), so it was irrelevant to include that information.
No it wasn't. I see many posts where people are trying to use installer discs that come with another computer to install the OS on a second model. TDM is a popular way of trying that. Since you did not provide full information in your question as to which discs you had I could not rule this out.
You also don't say anything about the computer models, which would help in answering your questions. The question immediately comes to mind, why don't you just boot from the installer DVD?
Anyway, put the newer computer into TDM with the two connected, you should hopefully be able to see the DVD in the drive on the TDM computer and select it as a startup disk on the older computer. Another way is to hold down the option key while booting, but some computers don't have that capability.
Message was edited by: Limnos

How do you install Tiger using target disk mode?

Hi guys,
I have an old Powerbook G4 that seems to have a dead DVD drive, so i am now trying to install Tiger using target disk mode from my Macbook Pro.
I successfully mounted the G4 using target disk mode and the Tiger install DVD but when I double click the install icon, I get an error message saying: "Mac OS X 10.4 cannot be installed on this machine"
Okay, fine but i want to install the OS on the G4. How do I go about selecting the G4 for installation?
Thanks in advance for your help.

Hi Nichola,
Have you tried a search on the support site with the error messages you are receiving? (Maybe your computer doesn't meet the minimum requirements to run Tiger.)
To re-initialize your disk, go into disk utilities, select 'Erase' and follow the instructions. This will erase and format your disk. Hopefully this helps, but I'm not sure if it will solve your kernel panic problem - maybe that's a different issue all together??
Hopefully, you've already backed up your important data, but you should try to use target disk mode to do that if you are still unable to boot up the G4 using Tiger. Good luck - hope this is helpful.

Is it possible to install OSX on another computer via Target disk mode?

Hey there...
a friend of mine has an older iBook. the drive on this iBook is broken (snapped off) so there's no way of using it.
is it possible to install OS Panther from another computer (use OS X panther install running on a MacBook, or G4) targeting the iBook via Target Disk mode?
thanks!
-

Hello Again SCHPiLKAS!
As roam posted, you cannot use the Intel MacBook install discs, on the PPC iBook.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
If the iBook meets the Panther System Requirements, and the Additional Panther System Requirements, and you have a Full Retail Version, of the Panther Install CDs, you can use Firewire Target Disk Mode, to install the system.
The Panther discs should look, exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
ali b

Instal OS 10.4 trough target disk mode

Similar Messages

Maybe you are looking for