Instal XE Client;

hi, srs;
I was wondering, if we will find problems in uninstall 9i oracle's client and installing 10g client.
Normally i will access 9i servers at all. executing sqlplus, imp, exp and development tools;
Advanced Thanks
Marcos Ortega Brasil;

I would keep a client for each version of the database you will be working with. I have found in the past that that makes life less painful. Even if you never have to use it, it's nice to have it around. Of course, if you almost never access a particular version but you have the client on CD, you could always reinstall.
But, I tend not to remove a client until I have removed the database.
LewisC
http://blogs.ittoolbox.com/oracle/guide/

Similar Messages

  • Error in installing Oracle client 11g on Windows 2008 R2 (64bit) XenApp 6

    I am trying to install "win64_11gR2_client.zip" Oracle 11g Client 64bit on Windows 2008 R2 that has been clamped and restricted by our security department. Details of the clamp:
    http://support.microsoft.com/kb/885409
    The Windows 2008 R2 server is running on CITRIX XenApp 6.
    When we try to install the client on a normal version of Windows 2008 R2 without the Clamp, the installation follows through and successfully. However, when we try to install the 11g Client on the Clamped Windows 2008 R2, we get the error below:
    [INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'
    This indicates the primary issue is with the clamp. My issue now is knowing what exactly is causing the error. what restrictions should I enable from the clamp in order to get the installation working?
    Here is the error log:
    Error log:
    INFO: Loading data from: jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
    INFO: Loading beanstore from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
    INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/setupc/AppData/Local/Temp/OraInstall2011-10-10_04-13-35PM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
    INFO: Verifying target environment...
    INFO: Checking whether the IP address of the localhost could be determined...
    INFO: Completed verification of target environment.
    INFO: Inventory exists: false
    INFO: Registering setup bean
    INFO: Building Flow
    INFO: Building the flow graph
    INFO: Loaded state init
    INFO: Loaded state clientInstallType
    INFO: Loaded state productLanguage
    INFO: Loaded state getOracleHome
    INFO: Loaded state prereqExecutionDecider
    INFO: Loaded state checkPrereqs
    INFO: Loaded state postPrereqs
    INFO: Loaded state summary
    INFO: Loaded state clientCustomInstall
    INFO: Loaded state schedulerAgent
    INFO: Loaded state mtsDialog
    INFO: Loaded state setup
    INFO: Loaded state finish
    INFO: Linking states
    INFO: State[checkPrereqs]: route=success; to=summary
    INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
    INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
    INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
    INFO: State[clientInstallType]: route=ic_no; to=productLanguage
    INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
    INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
    INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
    INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
    INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
    INFO: State[init]: route=success; to=clientInstallType
    INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
    INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
    INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
    INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
    INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
    INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
    INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
    INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
    INFO: State[setup]: route=success; to=finish
    INFO: State[summary]: route=success; to=setup
    INFO: Successfully built the flow
    INFO: Opening bean stores from which the beans can be loaded
    INFO: Loading beanstore from a given input stream
    INFO: Translating external format into raw format
    INFO: Registering the flow data beans
    INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
    INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
    INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
    INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
    INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
    INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
    INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
    INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
    INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
    INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
    INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
    INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
    INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
    INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
    INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
    INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
    INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
    INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
    WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
    WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
    WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
    WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
    INFO: Set value for bean ClientSetupBean
    INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
    INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
    INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
    INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
    WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
    INFO: Closing bean stores from which the beans can be loaded
    INFO: Registering the flow views
    INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
    INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
    INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
    INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
    INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
    INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
    INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
    INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
    INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
    INFO: oracle.install.ivw.client.view.CustomInstallGUI added to View Type Registry with the key as [CustomInstallUI]
    INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
    INFO: oracle.install.ivw.client.view.SchedulerAgentGUI added to View Type Registry with the key as [SchedulerAgentUI]
    INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
    INFO: oracle.install.ivw.client.view.OraMTSGUI added to View Type Registry with the key as [OraMTSUI]
    INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
    INFO: oracle.install.ivw.client.view.InstallLocationGUI added to View Type Registry with the key as [InstallLocationUI]
    INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
    INFO: oracle.install.ivw.client.view.InstallTypesGUI added to View Type Registry with the key as [InstallTypesUI]
    INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
    INFO: oracle.install.ivw.client.view.FinishGUI added to View Type Registry with the key as [FinishUI]
    INFO: Initial values of Setup Properties :
    PROPERTY VALUE
    COLLECTOR_IGNORE_CONFIGURATION false
    COLLECTOR_IGNORE_FAILURES false
    COLLECTOR_RESPONSE_FILE
    DECLINE_SECURITY_UPDATES false
    FROM_LOCATION C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Releas
    e 2\client\install\../stage/products.xml
    INSTALL_TYPE InstantClient
    MYORACLESUPPORT_PASSWORD Protected value, not to be logged
    MYORACLESUPPORT_USERNAME
    ORACLE_BASE
    ORACLE_HOME
    ORACLE_HOSTNAME mndwg068cs.rad.afpaa.r.mil.uk
    PROXY_HOST
    PROXY_PORT
    PROXY_PWD Protected value, not to be logged
    PROXY_USER
    SECURITY_UPDATES_VIA_MYORACLESUPPORT true
    SELECTED_LANGUAGES {"en","en_GB"}
    oracle_install_LaunchNetCA false
    oracle_install_NoMigration true
    oracle_install_RACInstall false
    oracle_install_WindowsSystemDirectory
    oracle_install_client_OraMTSPortNumber 49155
    oracle_install_db_ConfigurationType
    oracle_install_db_InstallEdition EE
    oracle_install_db_InstallType
    INFO: Launching Oracle Client Installer
    INFO: Started executing the flow in INTERACTIVE mode
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state init
    INFO: Waiting for completion all forked tasks at state init
    INFO: All forked task are completed at state init
    INFO: Completed background operations
    INFO: Executing action at state init
    INFO: Completed executing action at state <init>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <init>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <init>
    INFO: Completed validating view at state <init>
    INFO: Validating state <init>
    WARNING: Validation disabled for the state init
    INFO: Completed validating state <init>
    INFO: Verifying route success
    INFO: Get view named [InstallTypesUI]
    INFO: size estimation for InstantClientinstall is 199.0705451965332
    INFO: size estimation for Administratorinstall is 1068.0003070831299
    INFO: size estimation for Runtimeinstall is 751.6538038253784
    INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@2398dc19
    INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
    INFO: InstallTypesPane installType is: InstantClient
    INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
    INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
    INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
    INFO: Loading view <InstallTypesUI> at state <clientInstallType>
    INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
    INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
    INFO: size estimation for InstantClientinstall is 199.0705451965332
    INFO: size estimation for Administratorinstall is 1068.0003070831299
    INFO: size estimation for Runtimeinstall is 751.6538038253784
    INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state clientInstallType
    INFO: Completed executing action at state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Client Install Type set in InstallTypeUI is : Runtime
    INFO: Validating view at state <clientInstallType>
    INFO: Completed validating view at state <clientInstallType>
    INFO: Validating state <clientInstallType>
    WARNING: Validation disabled for the state clientInstallType
    INFO: Completed validating state <clientInstallType>
    INFO: In Transition of InstallTypesAction:
    INFO: Verifying route ic_no
    INFO: Get view named [ProductLanguageUI]
    INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@1875a340
    INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
    INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
    INFO: Loading view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
    INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
    INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
    INFO: Fetching Available Languages...
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state productLanguage
    INFO: Waiting for completion all forked tasks at state productLanguage
    INFO: All forked task are completed at state productLanguage
    INFO: Completed background operations
    INFO: Executing action at state productLanguage
    INFO: Completed executing action at state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: The languages in which the product will be installed are [en, en_GB]
    INFO: Validating view at state <productLanguage>
    INFO: Completed validating view at state <productLanguage>
    INFO: Validating state <productLanguage>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
    INFO: Completed validating state <productLanguage>
    INFO: Verifying route productlanguage_yes
    INFO: Get view named [InstallLocationUI]
    WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
    WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
    INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@15837e8
    INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
    INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
    INFO: Loading view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
    INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
    INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state getOracleHome
    INFO: Completed executing action at state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <getOracleHome>
    INFO: Completed validating view at state <getOracleHome>
    INFO: Validating state <getOracleHome>
    INFO: custom prereq file name: oracle.client_Runtime.xml
    INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: InstallAreaControl exists: false
    INFO: Checking:NEW_HOME
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:ORCA_HOME
    INFO: Reading shiphome metadata from C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\install\..\stage\shiphomeproperties.xml
    INFO: Loading beanstore from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
    INFO: Translating external format into raw format
    INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/Dev Citrix Tools/Oracle Tools/Oracle 11g client Release 2/client/install/../stage/shiphomeproperties.xml
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: size estimation for Runtimeinstall is 751.6538038253784
    INFO: PATH has :==>C:\Users\setupc\AppData\Local\Temp\OraInstall2011-10-10_04-13-35PM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;D:\ORADEV10g\jdk\jre\bin\classic;D:\ORADEV10g\jdk\jre\bin;D:\ORADEV10g\jdk\jre\bin\client;D:\ORADEV10g\jlib;D:\ORADEV10g\bin;D:\ORADEV10g\jre\1.4.2\bin\client;D:\ORADEV10g\jre\1.4.2\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\CA\SharedComponents\ScanEngine;C:\Program Files\CA\SharedComponents\CAUpdate\;C:\Program Files\CA\SharedComponents\ThirdParty\;C:\Program Files\CA\SharedComponents\SubscriptionLicense\;C:\Program Files\CA\eTrustITM;C:\Program Files (x86)\Citrix\system32\;C:\Program Files (x86)\Citrix\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\System32\Citrix\IMA\Subsystems;C:\Windows\System32\Citrix\IMA;C:\Program Files (x86)\Citrix\system32;C:\Program Files (x86)\Common Files\Citrix\System32\
    INFO: Completed validating state <getOracleHome>
    INFO: InstallLocationAction to INVENTORY_NO
    INFO: Verifying route INVENTORY_NO
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state prereqExecutionDecider
    INFO: Completed executing action at state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <prereqExecutionDecider>
    INFO: Completed validating view at state <prereqExecutionDecider>
    INFO: Validating state <prereqExecutionDecider>
    WARNING: Validation disabled for the state prereqExecutionDecider
    INFO: Completed validating state <prereqExecutionDecider>
    INFO: Verifying route executeprereqs
    INFO: Get view named [PrereqUI]
    INFO: View for [PrereqUI] is [email protected]2ac
    INFO: Initializing view <PrereqUI> at state <checkPrereqs>
    INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
    INFO: Displaying view <PrereqUI> at state <checkPrereqs>
    INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
    INFO: Loading view <PrereqUI> at state <checkPrereqs>
    INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
    INFO: Localizing view <PrereqUI> at state <checkPrereqs>
    INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state checkPrereqs
    INFO: custom prereq file name: oracle.client_Runtime.xml
    INFO: refDataFile: C:\Dev Citrix Tools\Oracle Tools\Oracle 11g client Release 2\client\stage\cvu\oracle.client_Runtime.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: Completed executing action at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state checkPrereqs
    INFO: Waiting for completion all forked tasks at state checkPrereqs
    INFO: Creating PrereqChecker Job for leaf task Physical Memory
    INFO: Creating CompositePrereqChecker Job for container task Free Space
    INFO: Creating PrereqChecker Job for leaf task Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp
    INFO: Creating PrereqChecker Job for leaf task Architecture
    INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
    INFO: CVU tracingEnabled = false
    INFO: Nodes are prepared for verification.
    INFO: *********************************************
    INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:mndwg068cs
    INFO: Expected Value:128MB (131072.0KB)
    INFO: Actual Value:3.9996GB (4193848.0KB)
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Free Space: mndwg068cs:C:\Users\setupc\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:mndwg068cs
    INFO: Expected Value:130MB
    INFO: Actual Value:26.0185GB
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:mndwg068cs
    INFO: Expected Value:64-bit
    INFO: Actual Value:64-bit
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:mndwg068cs
    INFO: Expected Value:1023
    INFO: Actual Value:791
    INFO: -----------------------------------------------
    INFO: All forked task are completed at state checkPrereqs
    INFO: Completed background operations
    INFO: Moved to state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating view at state <checkPrereqs>
    INFO: Completed validating view at state <checkPrereqs>
    INFO: Validating state <checkPrereqs>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
    INFO: Completed validating state <checkPrereqs>
    INFO: Verifying route success
    INFO: Get view named [SummaryUI]
    WARNING: Failed to load the view [SummaryUI] . Reason: .
    Refer associated stacktrace #oracle.install.commons.flow.ViewManager:367
    INFO: Terminating all background operations
    INFO: Terminated all background operations
    SEVERE: [FATAL] [INS-08802] Unable to instantiate the View class referred by View ID 'SummaryUI'.
    CAUSE: The given class do not represent a valid View class or an unexpected error occured while instantiating it.
    ACTION: No additional information available.
    SUMMARY:
    - java.lang.NullPointerException.
    Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:370
    INFO: Advice is ABORT
    SEVERE: Unconditional Exit
    INFO: Adding ExitStatus FAILURE to the exit status set
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is -1
    INFO: Shutdown Oracle Client Installer
    INFO: Unloading Setup Driver

    Hi;
    Please see below note than Please see:
    Master Note For Oracle Database Client Installation [ID 1157463.1]
    *+<Moderator edit - MOS Doc content deleted - pl do not post contents of MOS Docs>+*
    If notes not help than i suggest rise SR
    Regard
    Helios

  • What query should I use to find all versions of Office 2013 64-bit installed on client computers?

    What query should I use to find all versions of Office 2013 64-bit installed on client computers? Could someone create a custom query? I need all of the client computers names and which ones have any Office 64-bit components. Thank you so much! I really
    appreciate it!

    Hi,
    You could edit the following query to meet your requirement.
    SELECT     dbo.v_R_System.Name0, dbo.v_GS_OPERATING_SYSTEM.Caption0 AS [Operating System],
                          dbo.v_GS_OPERATING_SYSTEM.CSDVersion0 AS [OS Service Pack], arp.DisplayName0,
                          CASE WHEN arp.version0 LIKE '11.0.6361.0' THEN 'SP1' WHEN arp.version0 LIKE '11.0.7969.0' THEN 'SP2' WHEN arp.version0 LIKE '11.0.8173.0'
    THEN 'SP3' WHEN
                           arp.version0 LIKE '12.0.6215.1000' THEN 'SP1' WHEN arp.version0 LIKE '12.0.6425.1000' THEN 'SP2' WHEN arp.version0 LIKE '14.0.6029.1000'
    THEN 'SP1' ELSE '' END
                           AS 'Service Pack', arp.Version0
    FROM         dbo.v_Add_Remove_Programs AS arp INNER JOIN
                          dbo.v_R_System ON arp.ResourceID = dbo.v_R_System.ResourceID INNER JOIN
                          dbo.v_RA_System_SMSInstalledSites AS ASSG ON dbo.v_R_System.ResourceID = ASSG.ResourceID INNER JOIN
                          dbo.v_GS_OPERATING_SYSTEM ON dbo.v_R_System.ResourceID = dbo.v_GS_OPERATING_SYSTEM.ResourceID
    WHERE     (arp.DisplayName0 LIKE '%Microsoft Office%edition%' OR
                          arp.DisplayName0 LIKE '%Microsoft Office Standard 2007%' OR
                          arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2007%' OR
                          arp.DisplayName0 LIKE '%Microsoft Office Professional%2007%' OR
                          arp.DisplayName0 LIKE '%Microsoft Office Standard 2010%' OR
                          arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2010%' OR
                          arp.DisplayName0 LIKE '%Microsoft Office Professional%2010%' OR
                          arp.DisplayName0 LIKE 'Microsoft Office 2000%' OR
                          arp.DisplayName0 LIKE 'Microsoft Office XP%') AND (arp.DisplayName0 NOT LIKE '%update%') AND
                          (arp.DisplayName0 NOT LIKE '%Microsoft Office XP Web Components') AND (dbo.v_R_System.Operating_System_Name_and0 NOT LIKE '%server%')
    AND
                          (arp.InstallDate0 NOT LIKE 'NULL')
    ORDER BY dbo.v_R_System.Name0, arp.DisplayName0, arp.Version0
    Full details:http://social.technet.microsoft.com/Forums/systemcenter/en-US/7baeb348-fb63-4115-8d76-2c884d18f708/sql-query-to-check-ms-office-service-pack-level?forum=configmgrreporting
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • If I were to purchase the Apple Remote Desktop with Unlimited licenses, would I be able to install the client software on each of there computers/laptops and have them remote desktop into the server?

    I have several friends and family who are looking for a central place to access information from ( Pictures, home movies etc ).  So I am considering setting up an OSX Lion Server.  There are some other things I can use it for as well.
    Here is my question:
    If I were to purchase the Apple Remote Desktop with Unlimited licenses, would I be able to install the client software on each of there computers/laptops and have them remote desktop into the server?  Or would I have to install the Admin software on each?  Do they intend it to be used strictly as one admin to access many clients? 
    I always could set up a network drive so they can log in and just see the folders they have created with space on the server I provide them.  But I want them to be able to log an and actually use it as a Remote Desktop.
    Thanks,
    Eric

    Dave,
    Thanks for the feedback.  I understand that ARD is meant for Remote Administration, but I was not sure if it could be used for my purpose as well.  The reason I was looking to do it this was was because I read several articles online about security and performance issues with setting up VNC and activating screen sharing.  Unless I am misunderstood. 
    As far as people's activities on the server, mostly it is going to be used as a place for them to store their media.  I will only allow own person ( Who I trust and I know wont botch the server ), to run applications.  Everyone else will be restricted to uploading and downloading content to their designated account on the server as well as a community share on the server.
    I appreciate your help.
    Thanks,
    Eric

  • Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

    I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
    UnsatisfiedLinkError exception loading native library: njni10
    Configuration assistant "Oracle Net Configuration Assistant" failed
    The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

    Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

  • Request for info on wide install of Client 8.1.7

    Hi friends,
    We are on the road to install Oracle Client 8.1.7 software on several hundreds of PCs...
    The basic idea is to set up a stage area (products.jar with sub-directories) on a http server and use that as a source location for OUI (v1.7.1.9.0).
    The question is: How do you distribute the OUI (Universal Installer) and what should be included in an OUI "environment? This environment is what the users have to install locally first to be able to run OUI (perhaps in silent mode) and install the Client 8.1.7.
    What parameters should be set in oraparam.ini?
    Any Client host OS environment variables?
    What files are needed? E.g. "oracle.swd.oui" and "oracle.swd.jre" files?
    etc... etc...
    Any help is appreciated :)
    Fredrik

    One person I talked to said to make sure LD_LIBRARY_PATH included /oracle/product/8.1.7./rdbms/lib/. However, that didn't help. James,
    Because the path of /oracle/product/8.1.7./rdbms/lib/ depends on the location of ORACLE_HOME you set, it doesn't sound like a pre-installation setting. It's not mentioned in the manual anyway.
    You may want to check to see if the following commands are on the installation user (oracle)'s PATH.
    $ /usr/bin/which make
    $ /usr/bin/which ar
    $ /usr/bin/which ld
    $ /usr/bin/which nm
    Also it's mentioned in the manual:
    ===============================================================
    Note: If you require /usr/ucb in your search path, make sure it
    comes after /usr/ccs/bin in the PATH setting.
    ===============================================================
    I set up a 8.1.7 on Solaris 8 but didn't have such a problem.
    Best luck,
    Han Zhang

  • How to install Oracle client Version 10.2.0.4 on a Windows server 2008

    Hi,
    I need to install an Oracle client on a Windows Server 2008 (32-bit), how do I do that?
    I want to install Oracle client version 10.2.0.4 (Instant Client Package - Basic: All files required to run OCI, OCCI, and JDBC-OCI applications).
    Pls. advice, I can't find instructions for this installation on Oracle.com or anywhere else.

    thx, it looks promising...
    but how to run the .jar files and which one to run, both Class12.jar and ojdbc14.jar, to start the installation?
    Do I need to install the java runtime environment to run the .jar files?

  • How to install oracle client on linux_x86_64 on red hat 5

    Hi, installing the oracle client on a linux server is new to me as I have always installed the client on windows servers. I have been looking on the OTN site for just the client download but I do not see one and also I have been looking through the installion guide for the 10gr2 database on x86_64 but there is no mention of a client install just speaks to install the database software?
    Is there a separate install for just the client or do I have to install the entire rdbms with no database?
    Thanks in advance.

    HI, I actually was following that exact document and I had downloaded from the link also to get the binaries...The problem I am running into is that when I run the installer it is after the first screen it is throwing an OUI-10203 the specified response file does not exists? It appears as though the installer thinks I am attempting to run an automated installation? Not sure why it is doing this I am clearly trying to run this interactively?
    Any thoughts.

  • How to install Oracle client on UBUNTU LInux

    Hi,
    I want to install oracle client on ubuntu linux. Which version of oracle client works on it and is there any other tool which i can install instead of oracle client?
    Regards,
    RJiv.

    RJiv wrote:
    Hi,
    I want to install oracle client on ubuntu linux. Which version of oracle client works on it All recent Oracle version support different Linux flavours
    The problem is Oracle usually don't provide direct Oracle Client download except for Windows. You need to download the Server installation file and install the client piece. The download files are rather large.
    and is there any other tool which i can install instead of oracle client?It depends on what you plan to do with Oracle client and why you need it.
    On alternative is instance client, it has direct download for all supported platform.
    http://www.oracle.com/technology/software/tech/oci/instantclient/index.html

  • How to install oracle client on pentium 4

    please can someone tell me how to install oracle client 8i on pentium 4 system. the installation is not going automaticlly , and if i explore the cd and press on the setup file the installing didnt start.

    8i definitely has problems with Pentium IV processors. The fix is to copy the entire CD to the hard drive and then rename each copy of symcjit.dll to symcjit.old.

  • Install oracle client 32 bits on 64 bits windows

    We need to intall Oracle driver for OLEDB on a SQL server box.
    The SQL server is windows 2008 R2 and SQL server 2008 R2, 64 bits.
    But because we have some SSIS packages that need to run in 32 bits,(for example the source file is the Excel), so we are installing oracle client 32 bits instead of 64 bits on the windows box which is 64 bits.
    Anyone knows if this will work?
    Thanks

    I think it should work. I have a server Win 2008 x64 which runs 32 bit 11g client and we haven't had an issue. I had the same situation as you are in which required me to install 32bit client on x64 server. if you have a test server I would try this on the test server identical to production to make sure that you won't see any hick ups in your production environment. hope this helps.

  • Could not find main class program will exit error while installing Oracle Client 32 bit on windows 7 32 bit OS?

    Hi Experts,
    When I am installing Oracle client 32 bit software on Windows 7 32 bit I am getting error as "could not find main class program will exit"
    I have tried installing latest Java software 7 also JDK 1.6.0_34 still I am getting the same problem below is my " oraparam.ini " details
    [Oracle]
    DISTRIBUTION=TRUE
    SOURCE=../stage/products.xml
    LICENSE_LOCATION=
    BOOTSTRAP_COMPS="oracle.swd.oui:11.1.0.6.0,oracle.swd.oui.core:11.1.0.6.0,oracle.jdk:1.5.0.1.1"
    JRE_SCRATCH_LOC=jdk/jre
    JRE_MEMORY_OPTIONS=" -mx96m"
    DEFAULT_HOME_LOCATION=product\11.1.0\client
    DEFAULT_HOME_NAME=OraClient11g_home
    NO_BROWSE=/net
    NLS_ENABLED=TRUE
    BOOTSTRAP=TRUE
    EXT_JLIB=../stage/ext/jlib
    OUI_VERSION=11.1.0.6.0
    ## JRE_VERSION is only for Windows. This is to copy accessbridge dlls
    JRE_VERSION=1.4.2
    ACCESS_DIR=../install/access
    #SHOW_HOSTNAME=ALWAYS_SHOW shows the hostname panel always
    #SHOW_HOSTNAME=NEVER_SHOW does not the hostname panel
    #SHOW_HOSTNAME=CONDITION_SHOW shows the hostname panel on condition
    SHOW_HOSTNAME=NEVER_SHOW
    #THIN_JDBC_FILENAME is optional and defaults to classes12.jar
    #The value specified for this should be packaged with OUI, and should
    #be relative to <OUI expanded stagedir>/jlib/
    THIN_JDBC_FILENAME=classes12.jar
    #RUN_OUICA specifies the batch script name that needs to be run
    #The script is ouica.bat for win32, and ouica.sh for solaris.
    #If the value is not specified, then the OUICA script is not run
    RUN_OUICA=ouica.bat
    CLUSTERWARE={"oracle.crs","10.1.0.2.0"}
    SILENT_VARIABLE_VALIDATION=TRUE
    [Generic Prereqs]
    MIN_DISPLAY_COLORS=256
    [IMAGES]
    FILE1=images/billboards.gif
    LICENSE_LOCATION=license.txt

    Duplicates of the other two times you asked this question:
    https://forums.oracle.com/thread/2559093
    https://forums.oracle.com/thread/2558027
    (and this time, your question does not appear to have anything to do with this particular forum space, either)
    Duplicate is locked.
    Do not EVER multi--post.   That is extremely bad forum etiquette.

  • Any docs on HOW TO INSTALL ORACLE CLIENT ON OBIEE SERVER?`

    Thanks...

    Generally speaking the way to installing Oracle Client does not depend directly on the product that is going to use it
    If some product requires some specific Oracle Client versions or Oracle Client configurations you should find this information in the product documentation (i.e OBIEE Server) and not in Oracle Client documentation.
    You can find Oracle Client documentation (named "Database Client") in the Installation sections of tahiti.oracle.com. For example for 11.2: http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=#microsoft_windows_installation_guides.

  • Can I install Oracle client on Mac os X version 10.4.6?

    Hello,
    My os version:
    ProductName: Mac OS X
    ProductVersion: 10.4.6
    BuildVersion: 8I127
    The processor information is "Dual 800 MHz PowerPC G4 2MB L3 cache per processor"
    Memory 1 GB SDRAM
    120 gig hard drive
    I would like to install the Oracle client software so i can run sql*Plus. I'm looking at the quick install guide and it says that "Only Mac OS X Server is supported." and it also says "The operating system version must be Apple Mac OS X Server 10.3.6"
    Why would Oracle only create an Oracle client that runs on a mac server? Is this information correct? or can I go ahead and install the client on my machine?
    Thank you,
    David

    No luck for me. :( Even gave total access to the directory and files. But the location of the lib file is not any directory on my machine.
    Thanks for any help you can provide.
    Eric
    <pre>
    /usr/ora_instant_client $ll
    total 86100
    0 drwxr-xr-x 12 root wheel 408B Jul 7 22:22:46 2007 ../
    0 drwxrwxrwx 14 root wheel 476B Jul 7 22:47:30 2007 ./
    16 -rwxrwxrwx 1 root wheel 15K Jul 7 22:48:25 2007 sqlplus*
    1368 -rw-rw-rw- 1 root wheel 1M Jul 7 22:48:25 2007 ojdbc14.jar
    728 -rwxrwxrwx 1 root wheel 727K Jul 7 22:48:25 2007 libsqlplus.dylib*
    92 -rwxrwxrwx 1 root wheel 90K Jul 7 22:48:25 2007 libocijdbc10.dylib*
    64612 -rwxrwxrwx 1 root wheel 63M Jul 7 22:48:25 2007 libociei.dylib*
    1800 -rw-rw-rw- 1 root wheel 1M Jul 7 22:48:25 2007 libocci.dylib.10.1
    1484 -rw-rw-rw- 1 root wheel 1M Jul 7 22:48:25 2007 libnnz10.dylib
    14544 -rwxrwxrwx 1 root wheel 14M Jul 7 22:48:25 2007 libclntsh.dylib.10.1*
    0 drwxrwxrwx 3 root wheel 102B Jul 7 22:48:25 2007 instantclient10_1/
    4 -rw-rw-rw- 1 root wheel 1K Jul 7 22:48:25 2007 glogin.sql
    1428 -rw-rw-rw- 1 root wheel 1M Jul 7 22:48:25 2007 classes12.jar
    24 -rw-rw-rw- 1 root wheel 20K Jul 7 22:48:25 2007 README_IC.htm
    /usr/ora_instant_client $sqlplus
    dyld: Library not loaded: /b/729/sqlplus/lib/libsqlplus.dylib
    Referenced from: /usr/ora_instant_client/sqlplus
    Reason: image not found
    Trace/BPT trap
    /usr/ora_instant_client $export
    DYLD_LIBRARY_PATH=/usr/ora_instant_client/instantclient10_1
    HOME=/Users/xxx
    LOGNAME=xxx
    PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/ora_instant_client
    PS1='$PWD $'
    PWD=/usr/ora_instant_client
    SHELL=/bin/ksh
    TERM=ansi
    TERM_PROGRAM=iTerm.app
    TNS_ADMIN=/usr/ora_instant_client/instantclient10_1
    </pre>

  • Installing VPN Client 5.0.07.0240 on Win 7 Pro 64 bit error 1720

    I purchased a new laptop last week. It is Win 7 Pro SP1 64 Bit. Old laptop Win XP Pro. Used Laplink's PCMover to move apps rather than to have to re-install. One of the apps was VPN Client 4.8.02.0010 This app did not work properly on new pc after migration. Had customer send me VPN Client 5.0.07.0240 for 64 Bit. They did so. I installed. I believe it uninstalled the old (migrated) VPN Client but did not do the install of the new VPN Client. Every time I attempt to install, I get error 1720. There is a problem with this Windows Installer Package.A script required for this install to complete could not be run. I called Cisco support and they led me here. I am pretty desperate, been trying to get this done for 18 hours. The reason I called support was I thought I could purchase my own VPN Client, whichever one would be best for me to access several sites that use Cisco VPN's (I have sites that use openvpn, etc), perhaps AnyConnect that I have seen herein, and then Cisco could help me install the client. If that is a good path to take, please let me know, otherwise how do I get this vpn client installed, please. John

    Hello John, and everyone.
    I am aslo face this issue. I tried to install software cisco VPN client "vpnclient-winx64-msi-5.0.07.0290-k9.exe" in my customer's labtop that installed window 7 64bit and it shows message  "cisco vpn client not support 64bits". but why in descript say that  "vpnclient-winx64-msi-5.0.07.0290-k9.exe"
    "VPN Client Software for x86 64-bit version of Vista/Windows 7 - Microsoft Installer"and when I tried to install it why it shows message can not support with 64 bits? what wrong ? Do anyone have experiences with this issue?
    Could anyone help me on this issue or do anyone have other version of Cisco vpn client that can support with window 7 64 bits?
    I am happy to see your ideas and answers!!
    Thanks
    sarem

  • I want to use the SQL Toolkit of NI and SQL Server as my databasis on a server. Do I need to install a client in each computer I want to handle the data into SQL tables or I need only a ODBC driver?

    I want to use the SQL Toolkit of NI and SQL Server as my databasis on a server. Do I need to install a client in each computer I want to handle the data into SQL tables or I need only a ODBC driver?

    You only need the ODBC driver on each computer. If you are distributing the SQL Toolkit app as an executable and do not install the whole toolkit on each computer, you'll need the SQL Toolkit support files. This is about a dozen files. You can get the list at http://digital.ni.com/public.nsf/websearch/b814be005f9da9258625658700550c75?OpenDocument.

Maybe you are looking for

  • How to add more fields at level task for importing to MsProject

    Hi everyone, We would like to have the same number of fields either for importing as exporting; or at least, the fields that we need. The problem is when we are configurating the fields for exporting from cProjects to MsProject, we found 81 available

  • Feed not working

    when i try to sumbit a new podcast this error messege comes up "Error parsing feed: Invalid XML: Error on line 1: Content is not allowed in prolog." Any suggustions

  • Why can't I turn on my iPhone 3Gs after a full discharge?

    My phone recently discharged until shutoff.  When I tried to charge the phone, I got the red battery charge indicator and a possitive charge symbol right below that, furthermore, my phone did not respond to any actions such as holding down the power

  • Black Bars

    Hello, I am exporting a movie from Final Cut Express using Quicktime Conversion. Everything is fine when I play the movie off of the the desktop. However, whenever I transfer the file (either burning to dvd or with an external hard drive) the file so

  • Error while installing Orcle Webcentre

    Environment: Windows XP SP3 I am configuring oracle webcenter. Initially, I have configured all the prereqs for Webcenter like RCU and Weblogic server. While starting the installation setup, installer for oracle webcenter crashes. In windows event lo