Instalacion Oracle 9i

Tengo :
Redhat 9.0
256 RAM
pentium IV
Error en la pantalla INSTALL es la ultima pantalla, se queda en
45% de avance
Gracias.
Atte. Octavio

I suppose that the problem is in improper using long names (containing blanks) in classpath. Try to doublequote them.

Similar Messages

Modo Grafico Oracle 9i en Linux Red Hat 8.0

Por favor quisiera saber si saben como levantar el administrador grafico en Linux del oracle 9i, ya que al terminar la instalacion este se levnata automaticamente, pero al apagar la maquina se cierra y no se como levantarlo

Por favor quisiera saber si saben como levantar el administrador grafico en Linux del oracle 9i, ya que al terminar la instalacion este se levnata automaticamente, pero al apagar la maquina se cierra y no se como levantarlo

Oracle 11g 2 sobre Windows 2008 64 bits

Hola a todos... tengo el siguiente problema.... cuando instalo Oracle 11g sobre Windows 2008 de 64 Bits aparece un error en la instalacion.... me dice error de protocolo.
Se intala sobre Windows 2008 de 64 Bits con un dominio
Ademas cuando no carga el EM
Saludos
Jorge

No.
Oracle Warehouse Builder version 10.1.x was desupported on 16-JUL-2007.
The desupport notice is available on Metalink (Note 376384.1).
The Warehouse Builder installation as part of the 11.1.0.7 installation should be certified, but I cannot find specifics.

Oracle Client x86 on Windows 7 x64

Buenas,
No tuve problemas al instalar el Oracle Client de 64bits en mi windows 7, pero cuando configuraba el PL SQL Development me surgieron un error, como el PLSQL es de 32bit y el Oracle Client de 64 no me detectaba el Oracle_home x ende tampoco oci.dll.
La solucion seria instalar un Oracle Client de 32bit en Windows, pero cuando instalo me sale los siguientes errores:
- Incompatibilidad con el sistema operativo.
- Configuracion del Oracle Asistente.
Es decir la instalacion termina con errores.
Alguna solucion para esto.
Traslate Google:
Good,
I had no problems installing the 64-bit Oracle Client on my Windows 7, but when setting up the SQL PL Development came to me a mistake, as is PLSQL Oracle Client 32bit and 64 did not detect the ORACLE_HOME x thus not oci.dll .
The solution would be to install a 32bit Oracle Client on Windows, but when I install I get the following errors:
- Incompatible with the operating system.
- Oracle Configuration Wizard.
That is the installation terminates with errors.
Any solution for this.

Solucion:
Editar C:\client\stage\prereq\client\refhost.xml
Y agregar:
<CERTIFIED_SYSTEMS>
<OPERATING_SYSTEM>
<! - Microsoft Windows 2000 ->
<version VALUE="5.0"/>
<SERVICE_PACK Value="1"/>
</ OPERATING_SYSTEM>
<OPERATING_SYSTEM>
<! - Microsoft Windows XP ->
<version VALUE="5.1"/>
<SERVICE_PACK Value="1"/>
</ OPERATING_SYSTEM>
<OPERATING_SYSTEM>
<! - Microsoft Windows 2003 ->
<version VALUE="5.2"/>
</ OPERATING_SYSTEMO>
<! - Microsoft Windows Vista ->
<OPERATING_SYSTEM>
<version VALUE="6.0"/>
</ OPERATING_SYSTEM>
*<! - Microsoft Windows 7 ->*
*<OPERATING_SYSTEM>*
*<version VALUE="6.1"/>*
*</ OPERATING_SYSTEM>*
</ CERTIFIED_SYSTEMS>
Y se soluciona cualquier error q pueda producir en la instalacion.

Error al instalar Oracle

Alguien me podría indicar que tengo que hacer para solucionar este problema?
Comprobando requisitos de configuración de red ...
Resultado Real: :Native Library C:\documents and settings\Usuario\Configuración local\Temp\OraInstall2007-11-10_12-49-05PM\bin\win32\DHCPPrereq.dll already loaded in another classloader
Comprobación terminada. El resultado general de esta comprobación es: No ejecutado <<<<
Recomendación: Oracle soporta instalaciones en sistemas con direcciones IP asignadas por DHCP. Sin embargo, para ello debe configurar el adaptador de bucle consigo mismo de Microsoft como adaptador de red primario del sistema. Consulte la guía de instalación para obtener más información sobre la instalación del software en sistemas configurados con DHCP.

This is one of the most frequently seen issues when configuring Enterprise Manager. Oracle requires the host to have a fixed IP address or at leas to have a loopback adapter, so it can have a fixed ip address even when the real address is assigned by the DHCP server. It is considered a warning, since it could work, however, as soon as the IP changes your EM configuration won't work any more, unless the original IP is re-assigned.
I suggest you to read this --> Enterprise Manager DB Control Console
I see this is your first post in this forum, so it understandable you may not be aware of the implicit rules here.
1. Write in English, this is an international forum where, as you can see, there are people from all over the world, and even though Spanish is one of the most spoken languages in the world, so Chinese is, and it doesn't guarantee it'll will be world wide understood, you've got more chances in English.
2. When posting you should clearly specify both, the OS and the DB versions you currently are referring to, it is not clear if you mean it is a 10gR1, R2 or 11gR1 release, and it is not clear which OS you are talking about, after the paths shown it can be inferred it is a WinXX platform. You can make the life easier if you specify this from the start.
~ Madrid

Necesito correo una aplicación forms de Oracle Aplicación Server

Tengo una aplicacion instalada en un servidor con windows 2003 la aplicacion es de forms con Oracle Aplication Server, cuando trator de ingresar el explorador safari de ipad simplemente no hace nada y no devuelve ningun error, consulte con el soporte de oracle y ellos dicen que los dispositivos deven tener una instalacion completa del explorador

Hola Roy!
If I understand correctly you are trying to migrate an application from OC4J to Tomcat.. What a strange idea! ;-)
You should not have to much difficulties to do it, since an ADF application is a pure J2EE application, but what you should add in your post is the different components involved in your application : JSF, pure servlet/JSP, Struts, UIX, ADFBC?
Also please detail the version of ADF/JDeveloper/OC4J you are using as a source for your project.
And also if you have tried and you have issues please put some error message, log information... It is very hard to help you with no information, since in the ideal "J2EE portable world" you sould be able to take your WAR file and redeploy is on Tomcat... Depending of the source of the issue pure J2EE deployment issue or ADF I may invite you to post your question on another forum (JDeveloper and ADF) if necessary
Could you please post your questions in english that is the language use by the OTN community. ( I am myself French...)
Regards
Tugdual Grall

Certificacion SSL en Oracle Apex

Alguien me puede brindar información sobre como implementar un certificado en un Servidor con las siguientes caracteristicas:
Servidor: Windows NT
Base de datos: Oracle 10g y Oracle 11g (estan las dos instaladas, pero se utiliza el Apache del Oracle 10g para lanzar la apliacion)
Aplicacion: Oracle Apex (corre por el puerto 7700)
Agradeceria links donde pueda ver una especia de tutorial para ver como realizar la instalacion de un certificado SSL.
Muchas Gracias

AI wrote:
Thanks Andy. So I guess these are the options:
1) Weblogic + APEX Listener
2) Glassfish + APEX ListenerIt appears that the Apex Listener is the favoured method for the future, but the Apache-based HTTP server isn't going away, is understood and works well.
From googling aroud, Glassfish was open source in Sun Microsystem days. Has Oracle licensed it? Wikipedia still says its open source.There are a couple of versions - Oracle has it's own licensed and supported version, but the 'Community' version works just as well.

Error while invoking a WS-Security secured web service from Oracle BPEL..

Hi ,
We are facing some error while invoking a WS-Security secured web service from our BPEL Process on the windows platform(SOA 10.1.3.3.0).
For the BPEL process we are following the same steps as given in an AMIS blog : - [http://technology.amis.nl/blog/1607/how-to-call-a-ws-security-secured-web-service-from-oracle-bpel]
but sttill,after deploying it and passing values in it,we are getting the following error on the console :-
“Header [http://schemas.xmlsoap.org/ws/2004/08/addressing:Action] for ultimate recipient is required but not present in the message”
Any pointers in this regard will be highly appreciated.
Thanks,
Saurabh

Hi James,
Thanks for the quick reply.
We've tried to call that web service from an HTML designed in Visual Studios with the same username and password and its working fine.
But on the BPEL console, we are getting the error as mentioned.
Also if you can tell me how to set the user name and password in the header of the parter link.I could not find how to do it.
Thanks,
Saurabh

Error while running a customize report in oracle ebs

Hi ..
can anybody suggest how to solve the follwing error while running a customize report in oracle ebs?
XXIFMS: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
Current system time is 03-JUN-2011 11:09:24
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DATE_FROM='2010/04/01 00:00:00'
P_DATE_TO='2011/06/03 00:00:00'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
stat_low = 9
stat_high = 0
emsg:was terminated by signal 9
ld.so.1: rwrun: fatal: librw.so: open failed: No such file or directory
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 9
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 1068011.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 1068011 on node D0005 at 03-JUN-2011 11:09:24.
Post-processing of request 1068011 failed at 03-JUN-2011 11:09:24 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JUN-2011 11:09:24

Please post the details of the application release, database version and OS.
Is the issue with this specific concurrent program?
Can you find any errors in the CM/OPP log files?
Please see if these docs help.
On R12.1.1/Solaris Platform While Generating Oracle Reports Files Failed With Error " ld.so.1: rwconverter: fatal: librw.so: open failed: No such file or directory [ID 1067786.1]
Apps UPG Fail With Error Ld.So.1: Rwserver: Fatal: Librw.So [ID 961222.1]
Thanks,
Hussein

HELP! Can not install Oracle 8.1.5 w/ RedHat 6.1!

I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1. The
Oracle installation script generates several errors. I have
tried several attempts, using different options, but they all
generate errors.
Please help. The Oracle Installation scripts appear to be very
buggy... or perhaps they are incompatible with the standard
RedHat 6.1 release. Either way, it is very frustrating.
I have documented one of my (failed) installation attempts below.
Does anyone have any words of wisdom?
I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB RAM,
a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
2.2.12-2 kernel). RedHat was installed using the standard "Gnome
Workstation" configuration.
The Oralce CD is labeled:
"Oralce 8i Enterprise Edition
Release 8.1.5
for Linux
(c) Oracle Corporation 1999"
I got this CD about one week ago at Oracle OpenWorld '99 in Los
Angeles... it should be their "latest & greatest" version so far.
1. Pre-Installation and ./runInstall
I created an "oracle" Unix account w/ groups "oinstall" (the
primary group) and "dba" (a secondary group).
I created directories /u01 through /u04, belonging to oracle.
I setup .cshrc and sourced it, containing:
umask 022
setenv DISPLAY `hostname`:0
xhost +
setenv ORACLE_BASE /u01/app/oracle
setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
setenv ORACLE_SID cprtest
setenv PATH ${ORACLE_HOME}/bin:${PATH}
setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
setenv NLS_LANG US7ASCII
I downloaded jre116_v5 and installed to /usr/local/jre.
Finally, I executed (from the "oracle" Unix account):
cd /mnt/cdrom
./runInstall
Problem: I got the error (from ./runInstall):
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.
Please wait...
Error in CreateOUIProcess(): -1
: Bad address
Workaround: Executed the following commands instead:
cd /mnt/cdrom/install/linux
./runIns.sh
3. runIns.sh and root.sh
I selected the following options (from ./runIns.sh):
Source: /mnt/cdrom/stage/products.jar
Destination: /u01/app/oracle/product/8.1.5
Oracle 8i Enterprise Edition 8.1.5.0.0
Typical (585MB)
Installable Components: Oralce Intelligent Agent 8.1.5.0.0
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Directory for Database Files: /u02
Then (when instructed by ./runIns.sh), I attempted to execute
(from the
"root" Unix account):
cd /u01/app/oracle/product/8.1.5
./root.sh
Problem: I got the error:
"bash: ./root.sh: Permission denied"
The execute bit was not set.
Workaround: I executed:
chmod a+x root.sh
./root.sh
5. Configuration Tools
The Oracle Installer (./runIns.sh) attempted to execute:
A. Net8 Configuration Agent
B. Oracle Database Configuration Agent
Problem: The "Oracle Database Configuration Agent" failed with
the following error message:
"One or more tools have failed. It is recommended but not
required that these tools succeed for this installation.
You can now select these tools, read its details to examine
why they have failed, fix those problems, and retry them.
Or, you can click "Next" to continue."
When I selected the "Oracle Database Configuration Agent" for
more info, I got the following additional details (as the cause
of the error):
"A required command line argument is missing."
The log file
"/u01/app/oracle/oraInventory/logs/installActions.log" recorded:
"Command which is being spawned is /usr/local/jre/bin/jre
-Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
-classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-3_1_10.jar:/u01/app/oracle/produc
/8.1.5/jlib/share-1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAssist.jar:/u01/a
p/oracle/product/8.1.5/assistants/jlib/jnls.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/ACC.
AR:/u01/app/oracle/product/8.1.5/jlib/help-3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u01/app/oracle/product/8.1.5/jlib/n
tcfg.jar:/usr/local/jre/lib/i18n.jar
DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos NO_VALUE
/seedloc NO_VALUE /sid cprtest /orahome
/u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
/u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
/gdbName cprtest.parkrussell.com
Invalid Exit Code. The following result code will be used for
configuration tool: 1
Configuration tool Oracle Database Configuration Assistant
failed"
Workaround: There is obviously nothing I can do to fix this
problem. It appears to be an internal bug in ./runIns.sh.
Therefore, I selected "Next" and executed "dbassist" directly.
6. dbassist
I executed:
dbassist
Problem: I got the following error:
"JNLS Execution:oracle.ntpg.jnls.JNLSException
Unable to find any National Character Sets. Please
check your Oracle installation."
Workaround: Press "OK" and ignore the error.
7. dbassist (cont.)
I selected the following options:
Create database
Typical
Copy existing database files from the CD
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Problem: I got the following error:
"CD-ROM drive not detected on this system.
Database not created."
(Note: I've been running the installation scripts from the
CDROM drive this entire time. "df" shows the CDROM drive
mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
Workaround: Abort (which generated the additional error: "Unable
to create database. DBCA-00003: No CD-ROM drive detected.") and
run dbassist again, this time using different parameters.
8. dbassist, again
I executed "dbassist" again and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and iM demos
Global Database Name: cprtest2.parkrussell.com
SID: cprtest2
Create database now
Problem: I got the following error:
"ORA-01012: not logged on"
Workaround: Try, try again.
9. dbassist, one last time
Executed "dbassist" once more and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and interMedia
demos
Global Database Name: cprtest3.parkrussell.com
SID: cprtest3
Output creation script
Then, I executed (from the "oracle" Unix account):
cd /u01/app/oracle/product/8.1.5/install
setenv ORACLE_SID cprtest3
./sqlcprtest3.sh
Problem: I got the following output:
"Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> SVRMGR> Connected.
SVRMGR> ORACLE instance started.
ORA-01012: not logged on
SVRMGR> 2> 3> 4> 5> 6> 7>
8> 9> CREATE DATABASE "cprtest3"
ORA-01012: not logged on
SVRMGR> Disconnected."
Workaround: Beats me.
10. sqlplus
I attempted to execute sqlplus, but got the following error
message:
"/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission denied."
The execute bit was not set.
Workaround: I executed:
chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
sqlplus
I gave up for now... there were just too many things wrong with
this installation, starting with the very first command I was
supposed to execute (./runInstaller).
I can't fathom why Oracle's installation script has so many bugs.
Am I just doing something terribly wrong?
Please help.
null

I'm using enlightenment version 0.15.5-41, which is more recent
than the 0.15.5-37 version (containing the Oracle installer
patch) that you recommended. Unfortunately, it fails when using
this version.
I also tried installing Oracle using twm, with enlightenment
disabled. This didn't help either.
Furthermore, the errors that I'm encountering in the OUI are
not just toward the end of the installation. They happen from
the very beginning, right after I enter "./runInstall", and
continue every step of the way.
Calvin Mitchell (guest) wrote:
: Check out my thread: "Assistants Failure Toward end of Oracle
: Install" to see where i've gone with this.
: if your running Enlightenment as your window manager you need
to
: upgrade to 0.15.5-37, that will solve the OUI error.
: Let me know if you solve any of your problems.
: Chris Russell (guest) wrote:
: : I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1.
: The
: : Oracle installation script generates several errors. I have
: : tried several attempts, using different options, but they all
: : generate errors.
: : Please help. The Oracle Installation scripts appear to be
very
: : buggy... or perhaps they are incompatible with the standard
: : RedHat 6.1 release. Either way, it is very frustrating.
: : I have documented one of my (failed) installation attempts
: below.
: : Does anyone have any words of wisdom?
: : I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB
: RAM,
: : a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
: : 2.2.12-2 kernel). RedHat was installed using the standard
: "Gnome
: : Workstation" configuration.
: : The Oralce CD is labeled:
: : "Oralce 8i Enterprise Edition
: : Release 8.1.5
: : for Linux
: : (c) Oracle Corporation 1999"
: : I got this CD about one week ago at Oracle OpenWorld '99 in
Los
: : Angeles... it should be their "latest & greatest" version so
: far.
: : 1. Pre-Installation and ./runInstall
: : I created an "oracle" Unix account w/ groups "oinstall" (the
: : primary group) and "dba" (a secondary group).
: : I created directories /u01 through /u04, belonging to oracle.
: : I setup .cshrc and sourced it, containing:
: : umask 022
: : setenv DISPLAY `hostname`:0
: : xhost +
: : setenv ORACLE_BASE /u01/app/oracle
: : setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
: : setenv ORACLE_SID cprtest
: : setenv PATH ${ORACLE_HOME}/bin:${PATH}
: : setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
: : setenv NLS_LANG US7ASCII
: : I downloaded jre116_v5 and installed to /usr/local/jre.
: : Finally, I executed (from the "oracle" Unix account):
: : cd /mnt/cdrom
: : ./runInstall
: : Problem: I got the error (from ./runInstall):
: : Initializing Java Virtual Machine from
: /usr/local/jre/bin/jre.
: : Please wait...
: : Error in CreateOUIProcess(): -1
: : : Bad address
: : Workaround: Executed the following commands instead:
: : cd /mnt/cdrom/install/linux
: : ./runIns.sh
: : 3. runIns.sh and root.sh
: : I selected the following options (from ./runIns.sh):
: : Source: /mnt/cdrom/stage/products.jar
: : Destination: /u01/app/oracle/product/8.1.5
: : Oracle 8i Enterprise Edition 8.1.5.0.0
: : Typical (585MB)
: : Installable Components: Oralce Intelligent Agent 8.1.5.0.0
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Directory for Database Files: /u02
: : Then (when instructed by ./runIns.sh), I attempted to execute
: : (from the
: : "root" Unix account):
: : cd /u01/app/oracle/product/8.1.5
: : ./root.sh
: : Problem: I got the error:
: : "bash: ./root.sh: Permission denied"
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x root.sh
: : ./root.sh
: : 5. Configuration Tools
: : The Oracle Installer (./runIns.sh) attempted to execute:
: : A. Net8 Configuration Agent
: : B. Oracle Database Configuration Agent
: : Problem: The "Oracle Database Configuration Agent" failed
with
: : the following error message:
: : "One or more tools have failed. It is recommended but not
: : required that these tools succeed for this installation.
: : You can now select these tools, read its details to
examine
: : why they have failed, fix those problems, and retry them.
: : Or, you can click "Next" to continue."
: : When I selected the "Oracle Database Configuration Agent" for
: : more info, I got the following additional details (as the
cause
: : of the error):
: : "A required command line argument is missing."
: : The log file
: : "/u01/app/oracle/oraInventory/logs/installActions.log"
: recorded:
: : "Command which is being spawned is /usr/local/jre/bin/jre
: : -Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
: : -classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-
: 3_1_10.jar:/u01/app/oracle/product/8.1.5/jlib/share-
1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAs
sist.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/jnls.jar:/
u01/app/oracle/product/8.1.5/assistants/jlib/ACC.JAR:/u01/app/ora
: cle/product/8.1.5/jlib/help-
: 3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice-
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u0
1/app/oracle/product/8.1.5/jlib/netcfg.jar:/usr/local/jre/lib/i18
: n.jar
: : DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
: : NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos
NO_VALUE
: : /seedloc NO_VALUE /sid cprtest /orahome
: : /u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
: : /u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
: : /gdbName cprtest.parkrussell.com
: : Invalid Exit Code. The following result code will be used
for
: : configuration tool: 1
: : Configuration tool Oracle Database Configuration Assistant
: : failed"
: : Workaround: There is obviously nothing I can do to fix this
: : problem. It appears to be an internal bug in ./runIns.sh.
: : Therefore, I selected "Next" and executed "dbassist"
directly.
: : 6. dbassist
: : I executed:
: : dbassist
: : Problem: I got the following error:
: : "JNLS Execution:oracle.ntpg.jnls.JNLSException
: : Unable to find any National Character Sets. Please
: : check your Oracle installation."
: : Workaround: Press "OK" and ignore the error.
: : 7. dbassist (cont.)
: : I selected the following options:
: : Create database
: : Typical
: : Copy existing database files from the CD
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Problem: I got the following error:
: : "CD-ROM drive not detected on this system.
: : Database not created."
: : (Note: I've been running the installation scripts from the
: : CDROM drive this entire time. "df" shows the CDROM drive
: : mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
: : Workaround: Abort (which generated the additional error:
: "Unable
: : to create database. DBCA-00003: No CD-ROM drive detected.")
: and
: : run dbassist again, this time using different parameters.
: : 8. dbassist, again
: : I executed "dbassist" again and selected the following
options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and iM demos
: : Global Database Name: cprtest2.parkrussell.com
: : SID: cprtest2
: : Create database now
: : Problem: I got the following error:
: : "ORA-01012: not logged on"
: : Workaround: Try, try again.
: : 9. dbassist, one last time
: : Executed "dbassist" once more and selected the following
: options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and interMedia
: : demos
: : Global Database Name: cprtest3.parkrussell.com
: : SID: cprtest3
: : Output creation script
: : Then, I executed (from the "oracle" Unix account):
: : cd /u01/app/oracle/product/8.1.5/install
: : setenv ORACLE_SID cprtest3
: : ./sqlcprtest3.sh
: : Problem: I got the following output:
: : "Oracle Server Manager Release 3.1.5.0.0 - Production
: : (c) Copyright 1997, Oracle Corporation. All Rights
Reserved.
: : Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
: : With the Partitioning and Java options
: : PL/SQL Release 8.1.5.0.0 - Production
: : SVRMGR> SVRMGR> Connected.
: : SVRMGR> ORACLE instance started.
: : ORA-01012: not logged on
: : SVRMGR> 2> 3> 4> 5> 6> 7>
: : 8> 9> CREATE DATABASE "cprtest3"
: : ORA-01012: not logged on
: : SVRMGR> Disconnected."
: : Workaround: Beats me.
: : 10. sqlplus
: : I attempted to execute sqlplus, but got the following error
: : message:
: : "/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission
: denied."
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
: : sqlplus
: : I gave up for now... there were just too many things wrong
with
: : this installation, starting with the very first command I was
: : supposed to execute (./runInstaller).
: : I can't fathom why Oracle's installation script has so many
: bugs.
: : Am I just doing something terribly wrong?
: : Please help.
null

Logical operators in Oracle select query

Hello all,
Can i use logical operators in oracle select queries?
for 1 and 0 =0 ; 1 or 0 =0
if i have two fileds in a table COL1 have a value of 1010 and COL2 have a value of 0001.
Is there any way to use select col1 or col2 from table? where or is a logical operator?
Regards,

Hi,
NB wrote:
Hello all,
Can i use logical operators in oracle select queries?Sure; Oracle has the logical operators AND, NOT and OR. All the comparison operators, including >, >=, = !=, EXISTS, IN, IS NULL, LIKE and REGEXP_LIKE are really logical operators, since they return logical values. You can use them in SELECT statements, and other places, too.
for 1 and 0 =0 ; 1 or 0 =0
if i have two fileds in a table COL1 have a value of 1010 and COL2 have a value of 0001.It's unclear what you want. Maybe you'd be interested in the BITAND function:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28286/functions014.htm#sthref1080
BITAND is the only logical function that I know of. Many other functions, especially numberical fucntions such as MOD, have applications in logic.
Is there any way to use select col1 or col2 from table? where or is a logical operator?Whenever you have a question, please post a little sample data (CREATE TABLE and INSERT statements), and also post the results you want from that data.
Explain how you get those results from that data.
Always say which version of Oracle you're using.

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

SSO to Oracle Forms 6.0 and Oracle Reports 6.0

Hi,
Could somebody please explain how I should implement the SSO so that I can log on a forms application?
Should I use external partner app. ??
How can I parse the right parameters to the forms server ??
thanks,
Jerome

Hi,
Oracle Forms 6i does not support Advances Security for SQL*Net if this is what your question is. ASO is supported with Forms 9i and above
Frank

Oracle, Null and empty Strings

Currently I'm facing problems with a class, which contains a String, which
is set to "" (empty String).
When the class is persistent, oracle writes null to the table column
(which seems to be common oracle behaviour) and when retrieving the class,
the field is set to null as well, giving me a lot of null-pointer
exceptions.
Anyway ... I can cope with that (just a lot of extra work)
far worse is the problem, wenn searching objects, that have this field set
to "" oder null.
Oracle can't find the records because JDO creates Querys "where
string=null" or "where string=''" , where oracle expects "where string is
null" to find the records.
Is there a workaround or solution ?

Yeah, that would work as well, thx, but since I have to cope with
null-Strings now everywhere in my program, it doesn't hurt just to forbid
empty strings on the program side.
In future times I'll test on Oracle first, then porting to DB/2 - this way
I suppose work is far less to garant compability.
Nevertheless ... having to set the bankcode into quotes is a kodo bug in
my opinion.
Kodo knows the type of classfields (in this case string) and shouldn't
send the parameter as a BigDecimal to the database.
Given that, and having only bankcodes of null (only neccesary when using
Oracle), the method would look like:
public Collection getAccounts (String bankCode)
throws Exception
return getAccounts (Account.class, "bankcode=="+bankcode);
which is how a transparent persistent layer, um, should be , um , I mean
... just transparent ;-D
Marc Prud'hommeaux wrote:
Stefan-
Couldn't you just do something like:
public Collection getAccounts (String bankCode)
throws Exception
String filter;
if (bankCode == null || bankCode.length () == 0)
filter = "(bankCode == null || bankCode == "")";
else
filter = "bankCode == "" + bankCode + """;
return getAccounts (Account.class, filter);
If I understand the problem correctly, this should work for all the
databases.
In article <[email protected]>, Stefan wrote:
What operations are you performing to cause this SQL to be issued? You
say you are having trouble removing objects, but this is clearly not a
DELETE statement. Is this the SQL that is issued when looking up
objects by identity?I'm not removing objects, I was removing just quotes from parameters ;-)
A string column... is it also represented as a string field in your class?Yeah ... just to give you an impression of the code:
First we have a class, representing a bank account:
public class Account {
private AccountMgr myAccountMgr;
private String bankCode;
private String id;
Note, that in nearly all cases bankCode will be a number or null.
I have a second class "AccountMgr", which does all of the persistant stuff
(seaching, making persistent etc.)
This class has two methods, one versatile (protected) to retrieve accounts
by a given filterString and one who just returns accounts by bankCode,
building the expected filterstring. Here is my current working version:
public class AccountMgr {
public Collection getAccounts(String bankCode) throws Exception {
if (bankCode!=null) {
if (bankCode.equals("")) {
throw new Exception("check code, bankCode='' not allowed to get
same behavior from DB2 and Oracle");
// if set, quote the bankCode
bankCode="""+bankCode+""";
return getAccounts(Account.class,"bankCode=="+bankCode);
protected Collection getAccounts(Class accountClass, String filterAdd)
throws Exception {
PersistenceManager pm = MyHelper.getPersistenceManager();
String filter="";
if (filterAdd!=null && !filterAdd.trim().equals("")) {
filter+=filterAdd + " && ";
filter += "myAccountMgr==_accMgr";
Query query = pm.newQuery(accountClass, filter);
query.declareParameters("AccountMgr _accMgr");
return (Collection) query.execute(this);
As you can see, in the first method I have to set the bankCode into
quotes, when it's not null.
This is because otherwise a filter like "bankCode=1234" will be translated
in a way, where 1234 is send as a BigDecimal to the database:
[...] executing statement <4239745>: (SELECT [...] FROM JDO_ACCOUNT t0
WHERE t0.BANKCODE = ? : [reused=1;params={(BigDecimal) 1234}]
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com

Installation Problem on Pentium4 with ORACLE 8.1.7 Client

I tried to Install the ORACLE Client 8.1.7/8.1.6 on Pentium4 with NT platform. On inserting the CD it gave the first prompt and after Clicking the "INSTALL/DE-INSTALL PRODUCTS", system stops. Checking in the TaskManager helps us to know that 'setup.exe' and 'java.exe' were started for a fraction of the second and then stopped.
Tried to explore the issue and it seems that the JAVA version which ORACLE is using for the INSTALLATION of 8.1.7 is NonCompatible with the P4[NT Platform].
However, 8.0.5/8.0.6 Client version were successfully Installed on the same configuration.
Can Anyone help me out in Installing 8.1.6 on P4[NT base].
Thanks in advance

Is the machine you're trying to install on the
machine your display is running on?
If not, doing a
'xhost + name_of_machine_you_are_installing_on'
on the machine your display is running on should do the
trick.
Hope that helps.
M. Geselle

Instalacion Oracle 9i

Similar Messages

Maybe you are looking for