Instalation in vista 64 bit

I can't seem to be able to instal the flash player for some
reason any one know why? nothing seems to happen

Update:
https://discussions.apple.com/message/22490926#22490926
Maybe this may help others

Similar Messages

  • Installing Windows Vista Ultimate 64 bit on Bootcamp issue

    Hi I'm a newbie, I would like to install Windows Vista Ultimate 64 bit using boot camp. I went into boot camp to partition and split the 1 terabyte hardrive. half is for Leopard, the other half is for Windows Vista.
    I followed the steps and popped in the disk, awhile later I get a message saying "Where do you want to install Windows?"
    It's showing:
    Disk 0 Partition 1 200 mb primary
    Disk 0 Partition 2 466 gb Primary
    Disk 0 unallocated space 128 mb
    Disk 0 partition 3 Boot camp 464 gb Primary.
    which ever one I click on it says "Windows Cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS"
    I can't get passed this part, what do I do?
    Any help is greatly appreciated

    Hi Stuart,
    Vista needs its system partition to be formatted with NTFS.
    The BootCamp Asistant does a pre-format with FAT32 since OSX can not write to NTFS partitions (only read).
    Therefor you have to reformat the Windows partition with the Vista Installer to NTFS.
    See page 11 of the BootCamp Setup Guide found here http://www.apple.com/support/bootcamp/ (and it's also part of the BootCamp Assistant).
    Regards
    Stefan

  • HT1923 How to uninstall itunes 32 bit and install itunes 64 bit on windows vista 64

    I installed 32 bit version of Itunes by mistake on a Windows Vista 64 bit computer.  I have lots of items in my Itunes library.  Can I uninstall the 32 bit version and install the 64 bit version without loosing my Itunes library?

    Yes you can without losing your music. Here is a link to a good website that helps people install and / or uninstall iTunes properly. It can keep you from going completely nuts if you are running into any problems trying to install, reinstall or uninstall iTunes! You can find step by step instructions there to help you if you can't remove or install iTunes for any reason or if it got corrupted somehow. It also has other reference links that have helped a lot of people from going completely nuts with iTunes problems: http://HowToUninstalliTunes.com

  • Cannot get Itunes 8 64-bit installed on Vista

    I'm having a heck of a time trying to install itunes. I recently got Vista 64 and I have an ipod shuffle I would like to sync up with my computer but Itunes 64-bit is not installing. It loads up the install progress bar but it instantly says it's finished installing, but nothing gets installed. This might be because I first accidetntally installed the 32 bit version of itunes, but I uninstalled it when I realized I needed the 64 bit version. The 32 bit version didn't work either. But I don't understand why the 64 bit version is not installing. I tried clearing out the temp folder but I'm just wondering if anyone else is having this problem because it seems like it works for everyone else. Please help, thanks.

    Thanks, I got it working... I deleted the temp files, restarted, and tried installing itunes, but at first it did the same thing, it skipped the installation and said it was finished. Then I remembered I read somewhere someone said try renaming the default directory so I renamed it to apple/intunes/ and tried installing and guess what, it worked fine! I have no idea why the directory name would be screwing up the install but I'm pretty sure that's what the problem was because that was the only thing that fixed it. Anyways, I'm happy now, itunes is working. Now I just need a Macbook pro with 8 gigs of ram and I'll be set.

  • Everytime I connect my iPod to USB, iTunes says the following: This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.

    I have the latest 64-bit version of iTunes on Windows 7 Ultimate.  Everything was fine until recently.  Now when I connect my iPod Touch to the USB to sync with iTunes, I get the following message:  "This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes"  I have removed, repaired, and installed the 64-bit version numerous times as well as disabled all antivirus / adware utilities.  Same message appears when I plug in my iPod.  Any help would be greatly appreciated.

    Did you try removing and reinstalling all the Apple software using these instructions:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

    Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
    Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

    Installation Guide
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Apple Boot Camp Support
    Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
    You need Apple drivers. And you then need to add on your own audio driver.
    You can run Assistant at any time to download and save a set of drivers.

  • HT2305 I have Widows 8 but my Itunes wont open I keep getting a message "Itunes software does not install on 64 bit operating system"

    I have a Widows 8 laptop. I cant open Itunes. I get a message "Itunes software does not install on 64 bit operating system" Can anyone tell me how to get it installed?

    If you are referring to Vista Support, It may be after the new year before it fully supports vista. I have not upgraded to vista yet but I was thinking about it!

  • Got error message this Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes and install the 64-bit version and already have latest version and 64

    Got error message :"This this Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes and install the 64-bit version"   This is on a new macbook.  I already have the latest version installed and 64 bit.  Help.

    Did you do what the message said?
    Also try using the Win 7/Vista link in the following:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • Having some Issues After Installing Windows Vista

    I just recently installed Windows Vista Ultimate 32 Bit SP1 on my Intel iMac running OS 10.6. I thought everything was good until I noticed 2 things. 1. I did not have a Boot Camp icon in the system try, nor could I find it listed in control panels. 2. When I tried connecting to the internet via Internet Explorer while in Windows, it told me that I did not have a internet or network connection. When I'm on the Mac OS X side my internet connection is fine. I tried reinstalling the drivers, but my only options were install CD/DVD or to connect my computer to another computer. I tried installing them manually but I noticed a yellow exclamation point on my iSight and Broadcom drivers. I can't update them because I can't connect to the internet. Can anyone help? Any assistance is greatly appreciated. I'm not a PC expert. Thanks!

    Hi Adeedo,
    Even I have the same kind of problem. After reading an update features list, I turned off and on the "Network Time Zone" button, its the same issue and its almost an hour its still saying that "Waiting for Network Time. After reboot the msg didn't appear but after turn off and turn on, same issue.
    Seems like the update broken this issue while fixing the part of not showing the city and country when the "Network Time Zone" option is turned on.
    I have got the 1.3.5 features info from the following link.
    http://www.everythingpre.com/forum/palm-webos/offi​cial-webos-1-3-5-update-discussion-25209.html
    ( Date & Time
    When the user has Network time zone enabled, a city and country are no longer displayed.
    I got this phone recently two week ago, and it was on WebOs 1.2.1 till i upgraded to 1.3.5 a week ago. 
    I am also having some other issues like Alarm. I have set two alarms one at 6.30 am and another at 6.45 am. It used to work fine, like getting buzzed for two alarms one after the other till before I update to 1.3.5. Today morning i observed that i got the buzz for first alarm, but i was waiting for the second one and it didn't come at all. I dismissed the first one. The phone was in charging using AC power.
    (Sprint Navigation
    A user can launch Sprint Navigation from an address in an open contact entry in Contacts
    Either this statement is wrong or the update is not working as it supposed to if this statement is correct. When i click the address from the open contact entry it takes me to Googles Page but not to Sprint Navigation launcher. Either i am doing wrong. Some one can help me how to launch Sprint navigation from the contact entry.

  • Partially solved my itunes 8 install on Vista 64

    So I was getting the problem that itunes 8 wouldn't finish the install on my Vista 64 system. It kept reverting back the changes and not installing itunes. This was with the latest available itunes864.exe available on the download page. Also I noticed that even though it said it was the 64 bit version, it was installing in the x86 program files section and not in the "correct" 64 bit folder. If I tried to change the install directory, the install automatically crashed.
    So I decided to try and install the normal 32bit itunes8 setup and voila! everything installed just fin and itunes works just fine... except for one tiny little thing: It won't recognize my iphone and says I have to install the 64 bit version in order to sync with it.
    I will try and install the 64 bit version over the 32bit and see if it maybe works now.
    It didn't work an it borked my old install. WTG Apple!
    Message was edited by: teebu

    yeah well, i too suffered another freeze. this time the restart corrupted the file system. that really ****** me off. i had to try various things over an hour to get my machine back online, all the while thinking i would have to reinstall everything from scratch and possibly face bad sectors on my raid 0 array.
    i will try one last time, this time with the 32 bit version of itunes. if i get the same problems, i am nixing itunes forever, never to use another apple product again.
    i am a power user, and before itunes7 and 8 x64 versions, this machine was running rock solid without a single hickup.

  • Shockwave won't install on Vista x64?

    When I try to install (both web and standalone EXE) on my
    Vista x64 system, I get the error
    "Could not load the DLL library
    C:\Windows\system32\Macromed\Shockwave 10\gi.dll". The application
    has failed to start because its side-by-side configuration is
    incorrect. Please see the application event log for more detail.
    Any ideas how I can get around this? Odd that it's trying to
    install a 32-bit app in system32 instead of the SysWOW64 directory
    like it should...

    Adobe doesn't care about you or your problems. Go away.
    To get around this problem you would probably have to
    disassemble the installer and then place the dlls into the correct
    folders yourself. Adobe appears uninterested in doing anything. I'm
    kind of pissed off, can you tell? On the plus side this is a great
    opportunity for a competitor to take advantage of Adobe's
    incompetence.

  • Can't Install 64bit Vista Ultimate

    Hi,
    When I turn my laptop on. I press f12 - so I could go to the boot manager (my vista ultimately 64bit dvd in the laptop). It gives me a message that reads: Attempting to load a 64-bit application, however, this CPU is not compatible with 64-bit mode 
    I have a T-60 and it has the sticker "Windows Vista Capable" - it currently has windows XP
    Could someone tell me what I need to do to install the 64-bit verison?
    Thanks a lot 

    Welcome to the forum!
    If your T60 has a first generation Core Duo CPU, as opposed to Core 2 Duo, it can't run a 64-bit OS, but will run 32-bit Vista.
    What's the 7-character model number of your ThinkPad?
    Good luck and let us know.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • How to install the Vista on Qosmio G30?

    hello,
    i have bought vista ultimate 32 bit and want to install it on my g30 notebook, is there somewhere a step by step instruction, how to install it without having any trouble? i did a forum search but only found problem specific threads.
    thanks in advance!

    Hi Christian
    You search for a step-by-step Vista installation instruction??
    You dont need it. The Vista installation is very easy.
    First of all you have to install an RAID driver (but only if your notebook supports RAID)
    After this installation perform further with the Vista setup.
    After the Vista installation choose and download theToshiba drivers from the Toshiba European driver page and install the Vista drivers in the right order. The right order you will find in the installation instruction txt file.
    By the way; please check exactly what Qosmio G30 notebook you have and choose then the right Vista drivers!!!
    Regards

  • How do I install Windows Vista on my New Macbook Pro

    I need to use DOS for work to fill out reports for my organization. I have the newest 15.4 macbook pro with intel core 2 duo. I want to know the exact steps to install windows vista on my computer?? please help me.

    It depends on what you want to use Windows for, are you going to work mainly in Windows or OSX? Will you need to cross between the two and if so will restarting your computer be a pain?
    I use Paralles, a copy of that is around $75 as far as I can remember.
    Personally I had a copy of Windows XP so that was the first Windows OS I used with Paralles, then Vista came out so I though I would get a copy as it was supposed to be * the * Windows OS, when I installed Vista I was so dissapointed with it. I would go as far as say it is one of the ugliest OS's I have seen, I actually prefer XP, it's like the old space programs when you look at the sets, they made an effort but you can see the budget was low, it looks like a really poor effort at copying OSX but they didn't spend the money on doing it right.
    Anyway, I just use XP so Vista for me was a waste of money. XP works faster and is more intuitive than Vista 'If Windows can be intuative that is'.
    I also read out there that security in Vista isn't what it is cracked up to be.
    Hope this helps.

  • Qosmio G20 Vista drivers? Not needed to install Windows Vista

    Hello,
    I am new at this forum. My name is Francisco and I live in Brazil. I own a Toshiba Qosmio g20_105 and it is running Windows Vista Ultimate EN RTM 6000 without problems.
    To do this, you must perform a fresh install of Windows Vista. The drivers for network (Intel PRO100),for audio (Soundmax), for TV (Toshiba PCI Tuner), modem (toshiba modem), Alps pointing device are installed directly from microsoft. You must install Toshiba nvidia display driver, Toshiba Bluetooth (monitor and stack), Toshiba texas flash media driver, toshiba RAID (driver and utilities), toshiba remote control manager and ConfigFree for Windows Vista.
    You must have the Toshiba RAID drivers to install from the windows Vista DVD. Otherway, Windows does not recognize Toshiba RAID 0 and RAID 1.
    Below some pictures of my G20 Desktop screen:
    http://www.rabayjr.com/vista/myqosmiog20screen1.jpg
    http://www.rabayjr.com/vista/myqosmiog20screen2.jpg
    http://www.rabayjr.com/vista/myqosmiog20screen3.jpg
    And here is an example of using deskscapes animated backgrounds with Windows Vista, called dreamscene.
    It is in paused mode
    http://www.rabayjr.com/vista/myqosmiog20screen4.jpg
    To perform a fresh install of windows Vista:
    Please, download the Toshiba RAID drivers from here:
    http://www.rabayjr.com/vista/drivers/raid.rar
    1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
    2. Insert your Microsoft Windows Vista Edition Bootable DVD.
    3. Power on your computer and press F12 to display the boot menu.
    4. Choose the option to boot from the CD/DVD drive.
    5. On the first setup screen, choose your language options then press "Next".
    6. Press "Install Now".
    7. Type in your Product Key then press "Next".
    8. Accept the license terms by checking the box then press "Next".
    9. When asked "What type of installation do you want", press "Custom (advanced)".
    10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
    11. Browse to the location you have copied the RAID drivers to then press "OK".
    12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
    13. Make sure the TOSHIBA RAID driver is selected then press "Next".
    14. Continue the installation of Windows Vista as normal.
    Now you will need the Toshiba drivers for your Qosmio G20:
    See the Device manager info:
    http://www.rabayjr.com/vista/qosmiodrivers1.jpg
    Drivers:
    1. SD memory controller
    http://www.rabayjr.com/vista/drivers/SD_memory.rar
    2. Bluetooth monitor and stack
    http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
    http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
    3. Nvidia display driver GeForce Go 6600
    http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
    4. Texas FlashMedia controller
    http://www.rabayjr.com/vista/drivers/flasmedia.rar
    And finally the Toshiba utilities:
    Toshiba Configfree
    Toshiba Assist
    RAID utilities
    Remote control manager
    Toshiba SD Memory utilities
    That's it...
    So I must tell to you that Toshiba Qosmio G20 is Windows Vista Ultimate capable, indeed.
    Hope this helps people who need and want to install Windows Vista Aero on their Qosmio G20 machines.
    Message was edited by: FranciscoJr

    UPDATED POST: On March 08, 2007
    This is a step by step guide for those of you with problems to get Windows Vista functional on your G20 Qosmios
    Use a Windows Vista English Version RTM Ultimate 6000 DVD for installation.
    1 Backup your personal files and important data to a removable device, CD, DVD, flashmedia, pendrive, etc...
    2.Check your Qosmio player installation. if nedeed, reinstall it with the latest version (multilanguage), posted on Toshibas site (download drivers section).
    3.Download and copy the Toshiba RAID drivers to a removable media
    Please, download the Toshiba RAID drivers from here:
    http://www.rabayjr.com/vista/drivers/raid.rar
    4.To perform a fresh install of Windows Vista, Follow the steps below
    -1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
    -2. Insert your Microsoft Windows Vista Edition Bootable DVD.
    -3. Power on your computer and press F12 to display the boot menu.
    -4. Choose the option to boot from the CD/DVD drive.
    -5. On the first setup screen, choose your language options then press "Next".
    -6. Press "Install Now".
    -7. Type in your Product Key then press "Next".
    -8. Accept the license terms by checking the box then press "Next".
    -9. When asked "What type of installation do you want", press "Custom (advanced)".
    -10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
    -11. Browse to the location you have copied the RAID drivers to then press "OK".
    -12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
    -13. Make sure the TOSHIBA RAID driver is selected then press "Next".
    -14. Continue the installation of Windows Vista as normal.
    5. Go to Microsoft update and download all important updates available. If you wish you can install your native language, if other than English, from the Microsoft site.
    let Windows install all the drivers found for your Qosmio G20.
    6. Reboot your machine and follow with the steps below.
    DRIVERS YOU MUST INSTALL:
    1. Alps pointing device driver (This is from Alps and working fine with your Qosmio G20)
    http://www.rabayjr.com/vista/drivers/alpsdriver.rar
    http://www.rabayjr.com/vista/qosmioalps.jpg
    During the installation, Windows will complain that you are installing an early device driver. Do not attempt to this, Install it anyway.
    This is because the Windows driver for this device is originally installed with a more recent date and version from that you are trying to install.
    But the driver posting here is the correct from the Alps for your Qosmio g20.
    2. Bluetooth monitor and stack
    http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
    http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
    3. Nvidia display driver GeForce Go 6600
    http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
    To install the nvidia 97.52, you must do it manually:
    open the Device manager
    look for the Video adapter/nvidia Gforce go6600
    Driver update options
    Look for a driver in computer
    Choose a list of device drivers in computer
    With disc...
    Lool for the place you've extracted the nvidia 97.52.rar
    Find the nvts.inf and open it
    You will come to the following screen:
    http://www.rabayjr.com/vista/qosmionvidiainstall.jpg
    From a list choose your video card (go6600) and install it.
    If you think it is difficult, please see the VIDEO Nvidiainstall.avi:
    http://www.rabayjr.com/vista/drivers/nvidiainstall.rar
    After the extraction, play it with Windows media Player
    4. Texas FlashMedia controller
    http://www.rabayjr.com/vista/drivers/flasmedia.rar
    5.SoundMAX integrated digital audio. Driver 5.12.1.5410
    http://www.rabayjr.com/vista/drivers/soundmax5.12.1.5410.rar
    run the setup.exe and at first remove the driver you have installed on your Qosmio G20.
    reboot the computer
    Run the setup.exe again and install the new driver. At some install point, Windows Vista will need a confirmation, if you trust Analog devices incorporated to goes on..
    http://www.rabayjr.com/vista/qosmiosoundmaxinstall.jpg
    Continue with the installation and after finishing the process, test the functionallity of the new driver
    OR
    If your G20 model is using the Sigmatel HD audio chipset, so you must install other driver than the Soundmax integrated digital audio
    It is the SigmaTel HD Audio Driver for Windows Vista Version: 6.10.0.5324
    link:
    http://www.rabayjr.com/vista/drivers/sigmatelhd.rar
    6.Intel PRO Wireless 2200BG Vista version 9.1.0.115, including the Intel chipset identification utility.
    http://www.rabayjr.com/vista/drivers/intel_wireless.rar
    And for the Utilities you can download them from here:
    1.Toshiba Configfree
    http://www.rabayjr.com/vista/drivers/configFree.rar
    2.Toshiba assist
    http://www.rabayjr.com/vista/drivers/assist.rar
    3.Raid utilities
    http://www.rabayjr.com/vista/drivers/raidutil.rar
    4.Remote control manager
    http://www.rabayjr.com/vista/drivers/rcm.rar
    5.Toshiba disk creator.
    http://www.rabayjr.com/vista/drivers/disccreator.rar
    6.Picture enhancement utilily.
    http://www.rabayjr.com/vista/drivers/picenhan.rar
    You can select your desired screen brightness and the monitor input settings:
    monitor-in (rca normal or S-VHS plug in) when using your Qosmio as a monitor in for your VCR, DVD, Playstation, etc.
    For using TV as monitor-in you also can switch from NTSC to PAL video system.
    For screen brightness: This adjust affects the image of your DVD player software or when watching your DVD via media Center 2005
    http://www.rabayjr.com/vista/qosmiopicenh.jpg
    After installation this utility appears into the Toshiba Assist Window, on Optimize category as shown in the picture above.
    As the Toshiba Media (Top) buttons are not working by now, you can use the HotKey (Fn+4) which is working 100% , to toggle from Normal screen input(4:3 aspect)
    to wide screen input (16:9 aspect).
    Press the Fn+4 once and your monitor video in is 4:3 mode, press again and the monitor video in is 16:9 mode, press once more and the image returns to your lcd normal. screen.
    7. SRS Audio Sandbox utility (enhancement) for you soundmax audio experience
    The sandbox will allow you to process any audio in your system with one of three SRS technologies:
    WOW HD: Provides enhanced width, bass and definition for music sources.
    TruSurround XT: Virtualizes multichannel content for listening on two speakers,
    with post-processing enhancements.
    CX Xtract: Provides enhanced multichannel virtualization by combining TruSurround XT
    with Circle Surround II.
    link to download:
    http://www.rabayjr.com/vista/drivers/srs.rar
    8.Toshiba value added package:
    About the Toshiba Value added package for the G30, you can install it on the G20, but only some of the items, otherwise you will have conflicts with Windows mobility center.
    Do not install the Toshiba energy control. Designed only for the G30 model.
    It Maintains the Windows mobility center funcionality and the Toshiba Buttons (FN + F1, F2, F3, etc...)will be OK.
    9.Toshiba extended Tiles for Windows mobility Center.
    http://www.rabayjr.com/vista/drivers/tileswmc.rar
    10.Microsoft photo info.
    http://www.rabayjr.com/vista/drivers/photoinfo.rar
    OBS: All the downloads are directly from my FTP server. 100% secure. No Virus. No spywares
    Francisco

  • Is it Possible to install ODDC 32 bit on Windows Server 2008 R2(64bit)?

    Hi All,
    Is it Support to Install ODDC 32 bit on Windows Server 2008 R2(64 bit).
    I am Posting this bcoz I did not found any ODDC related Blogs.
    Please help on this
    Thanks,
    Raj

    The certification matrix ( http://www.oracle.com/technetwork/middleware/webcenter/content/odc-cert-matrix-214688.pdf ) does not mention OS for ODDC Server, but as ODC is certified for Win Server 2008, R2, 32 or 64 bit, I believe the answer is yes.
    Make sure, however, that you ODDC clients run on a different OS (see Exceptions).

Maybe you are looking for

  • Price Determination (Pricing) Date Control - Purchase Order

    Hi, We are exploring the Price Determination (Pricing) Date Control in the Purchase Order. Clientu2019s requiring  is, correct me if it is a wrong requirement: We have created Tax Codes: C2 -  CST 2% valid from 01.04.2010 C3 -  CST 3% valid from 01.0

  • I accidentally deleted the 'Drafts' button in Mail. How do I get it back?

    The Drafts option is usually listed next to the 'Flagged' option, along with the buttons saying 'Hide,' 'Inbox,' and 'Sent.' I, on accident, click and dragged it away and then, POOF! How can I get it back??

  • 3D Embedded JavaScript Disabled in Acrobat X

    I usually work with Acrobat 9 (Reader/Pro) and have created a 3D PDF with a lot of javascripting at the document level and 3D annotation level.  I recently tried viewing the PDF in Acrobat X and discovered that all the functionality that I encoded in

  • How to change role tabs according to users?

    I'm sure somebody else asked this question before but I could not find any answer yet. I always design roles and check "Entry point" mark to make it one of portal main tabs. Sometimes what I need is creating restricted pages for some groups under the

  • How do I handle this in .htaccess?

    Hi guys, How would I go about setting up a .htaccess file that forwards all requests to the root of the .com to another url, while maintaining all the beyond-the-root urls right where they are? Example : test.com -> forwarded to target.com test.com/h