Install 10.4.11 before installing 10.5?
I just got Leopard, and haven't had a chance to install it yet. Now that they've released 10.4.11, I'm wondering if I should upgrade to it before installing Leopard. I would prefer not to install it, just because OS upgrades always make me a bit nervous, so I would like to do as few as possible. My system seems to be working fine right now, and I would hate for something to go wrong before installing Leopard. But then again, I wasn't sure if installing Leopard on top of 10.4.11 would be "safer" than installing it on 10.4.10.
What do you guys think?
JJBaldwin7 wrote:
I just got Leopard, and haven't had a chance to install it yet. Now that they've released 10.4.11, I'm wondering if I should upgrade to it before installing Leopard. I would prefer not to install it, just because OS upgrades always make me a bit nervous, so I would like to do as few as possible. My system seems to be working fine right now, and I would hate for something to go wrong before installing Leopard. But then again, I wasn't sure if installing Leopard on top of 10.4.11 would be "safer" than installing it on 10.4.10.
What do you guys think?
I would install Leopard over 10.4.10. I think it's safer, but in either case backup everything before even thinking about either.
Similar Messages
-
My Macbook pro is running slow. Should I do a clean install before installing Mountain Lion?
My Macbook Pro has been taking forever to start up, and open windows, plus I get a lot of the spinning wheel of slow death when I'm working in my design programs. I HATE messing with my systems, because something always seems to go wrong.
Also, I have an iMac too. Can I install it on both machines if it is downloaded instead of a disk? Is that allowed?Fix your Machines BEFORE Upgrading the OS... Otherwise you will only compound your issues...
Basically... Make sure you have enough Free Hard Drive space for your Mac to Perform as expected...
Rule of thumb is about 25 GB +
This is what Apple has to say.
http://support.apple.com/kb/PH10798
More Info Here...
ds store > Why is my computer slow?
Thomas A Reed > Mac Performance Guide
wildehair wrote:
Also, I have an iMac too. Can I install it on both machines if it is downloaded instead of a disk? Is that allowed?
You can install it on any computer you own... Providing the System Requirements are met...
Install Mountain Lion on multiple Computers
Log into App Store on your other Computer(s), being sure to use the Apple ID that Originally purchased ML...
http://applelife.tv/2012/07/install-mountain-lion-on-multiple-macs/ -
Do I need to install CS3 on Windows 7 64 bit before installing CS5 Upgrade?
I am replacing a graphic designer's Windows Vista laptop with a Dell Precision T5500 desktop. Do I need to uninstall CS3 from the laptop and decommission the serial number? Then do I need to install CS3 on the new desktop before installing the CS5 upgrade? I was told I needed to decommission the installation, but I don't remember having to do that with other installations. Thanks in advance!
You should definetly deactivate any software before uninstalling. But you don't have to install CS3 in order to install CS5. Just have the serial number handy for verification. That said, depending upon the user's needs, you might want to leave CS3 available.
Bob -
After I install itunes on my windows 7 - 64 bit machine it will not reboot and I need to restore to a date before itunes was install. How do I fix this?
I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it. -
I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.
If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
Creating a backup before Leopard install
Is it possible to back up my entire 80gb imac startup drive to one of my firewire drives with assurance that I can go back to that system if my Leopard install goes haywire? My first attempt to install Leopard failed with some un-useful error message and I was concerned that I might have gotten too far to go back. It seems to have rebooted fine back to 10.4.10, but my other startup drive is 10.2.8 and I'd hate to have to startup from that
Make a bootable clone backup on the FW drive. I use LaCie Silverkeeper 1.1.4.
Most important! Test the bootable clone. Restart your computer with the Option key pressed and your external drive should appear as one of the bootable options. Select its icon and click on it. Only after you boot up and see that the clone is indeed a clone, do you really know that you are safe from any kind of installation problem.
I would also strongly suggest removing the external drive connectio from your computer before installing Leopard to be absolutely sure nothing can happen to it. -
Remote printer is recognized but message says can't find printer? It worked great before installing OSX Maverick?
Thank you for your response.
Unfortunately I have already rebooted the router and that did not fix the problem. The weird thing is that the computer is connected to the network, it just won't connect to my computer. I have printed the network configuration page to confirm this, and it says the wireless signal is strong.
I have not changed anything at all recently in terms of routers, networks, etc. The printer stopped working completely randomly.
Is there a part in the printer that like emits a signal which computers, phones, etc are supposed to detect? I don't know enough about the mechanics to really theorize about what is wrong, but it seems like that is the only thing that stopped working.
Do you have any other suggestions? -
I just recently got an iPod touch 5 and it won't let me download apps. It says they are free but when I install it , it keeps popping up saying before purchasing I must tap continue to verify my purchase something like that. Idk what to do. !!!!!
Yes. You can set the payment method to "None" once you log into iTunes on your PC/Mac. I have it set up this way.
-
Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
I am traveling with my macbook pro and I forgot to install final cut express and quicktime pro before I left. How can I in a way download them for free on my laptop from where I am? I need them and don't want naturally to buy them again!!!
Thank youAssuming you purchased QT Pro, you can always download it again at no extra charge by logging in to your Apple account.
Regarding FCE, there is no way to download & install the product. You need an original FCE install disk and your FCE serial number.
Final Cut Pro X (aka FCPX) can be purchased & downloaded from the App Store. -
Quicktime and itunes wont install. I have never had quicktime installed on my computer before
I recently bought an ipod touch 4g and realized that I needed itunes to activate it. After downloading itunes it wouldn't install, no error messages or anything, when I click on the installer it just doesn't do anything.
After downloading several versions of itunes (older versions) I finally found one that started to install. Then it told me that I need Quicktime on my computer in order for it to install. So I downloaded the latest version of quicktime and had the same problem, when I click on the installer, nothing happens. I tried downloading older versions of quicktime but still had the same problem.
I have never had quicktime or itunes installed on this computer before, so I know that it isn't an older version of the program hidden in my computer that is preventing the installation from happening.
My computer is running on Windows 7. I know that there wasn't a problem with downloading the software, the files weren't corrupted or anything. There are no error messages, the software doesn't even partially install. When I click on the installer, nothing happens. I have tried running the programs as an administrator and that doesn't change anything.
I have tried so many different things, but can't remember everything that I tried. Yesterday I spent nearly 10 hours trying to sort this out because I was determined to get my ipod running. I only stopped when my internet credit ran out and today after buying some more, I am trying again. Please help.I appreciate the quick response, thank you for that.
One thing I did try was windows cleanup utility and searched through the program files for all apple software, but had none. I even deleted the temp files on my computer, and on my internet browser, but nothing happened.
One thing that I didn't think of was deleting the installation files in my downloads folder, pretty silly of me but I didn't think it would make a difference. I also spent about 2-3gig on downloads yesterday and didn't want to delete the files but as a last resort I did and emptied my recycle bin, then downloaded a fresh copy of Quicktime and finally it installed!
Now I am in the process of downloading a fresh copy of iTunes, the download hasn't finished yet so I haven't had a chance to install it yet but I have a much better feeling about it this time after deleting all the old installation files from my downloads folder. If Quicktime worked after that, I am sure iTunes will.
I can't believe it was something so simple as deleting the installation files in my downloads folder and emptying the recycle bin. I had seriously gone through my entire computer looking for any little file that was related to Quicktime or iTunes. I didn't even think of the two most obvious places. I spent so much time and credit downloading multiple files and my computer even got a virus when trying to download a copy from an unauthorized source, I had no problem getting rid of the virus, but struggled with Quicktime and iTunes, that is why I got so frustrated! I feel like an idiot now :-P
Thank you for your help. I still havent installed iTunes yet, so fingers crossed. I think it will work now though. -
I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe product installing. I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked. I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues. Please help.
A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
Mylenium -
I am trying to install Photoshop Elements on my new Windows 8 computer (I recently upgraded my windows 7 computer where Photoshop was working fine on before). It says the serial number is invalid. Do older versionsnot work on Windows8, or do I need to uninstall it from my old computer first?
You are allowed to have two activated installations. If you happened to have one on this Windows 8 machine before, it is possible that the activation used for it was never deactivated (did you deactivate it before you upgraded Windows?). Talk to Adobe support thru chat. They might be able to resolve this with you:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
At first, after I re-installed the OS, nothing would happen when I clicked on an e-mail hyperlink. So I went to Folder Options in Control Panel and associated Firefox with the E-mail file type. Firefox then opened when I clicked on a hyperlink in an e-mail, but just opens to the Firefox start page ("Blank page"). Firefox does not open the URL in the hyperlink. I need guidance as to how to restore this function which worked perfectly before I had to re-install the OS due to a corrupted program installer. I have run the MS Office Detect and Repair function twice--both times indicating that everything is fine--but it does not make a difference in fixing the Firefox function.
NEW: An attempt to click on the link in Security Center to go to Microsoft Update brings up an error message that reads: "The requested lookup key was not found in any active activation context." I have no idea what this means, but I suspect it is related to the lack of ability to open Firefox to a link URL.
See the uploaded screen print(JPEG) below.
UPDATE: PROBLEM SOLVED!! Searched on error message on line, solution fixed problem. THANKS ANYWAY# Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
# Sign back in, and you will be asked to save the password you entered.
# This will save the password and autocomplete if you have this option turned on.
I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]] -
After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".
Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background' -
every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this? I don't want to lose my music and would at least want to save that.
Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086 and note to run as admin
Maybe you are looking for
-
Sound no longer working in 10.5.2
I've installed 10.5.2 on my PowerBook G4 15" 1.67GHz, and now, sound output no longer works. The "clicks" of the volume change don't work and neither does music playing in iTunes. Any ideas?
-
I'm using Premiere Elements with PS Elements. I was able to import to PS as a filmstrip (.flm) but when I return the .flm to priemier the video quality is drastically reduced. Is there a better way to do this without importing each of the 24 frames p
-
ITunes match storage full error on I devices
If I have iTunes match enabled on i devices it comes up with the message saying say storage is full. I haven't downloaded any songs at all I just stream it. I have never had this issue before until it was time to renew iTunes Match
-
I have a web site that I subscribe to and when I pulled it up Firefox asked me if I wanted to allow it or not. Accidently I pressed never allow for this site. Opps . . How do I undo this? I tried restarting and am now stuck as I can not access my web
-
Tags not importing with photos to new computer
Help! I just transferred 10,000 photos... all tagged beautifully in my previous computer..that are no longer tagged. I installed Elements 6 and imported the photos along with tags according the screen, but once the import is done less than 100 of t