Install 10.9.1 over developer seed
I have participated in the 10.9.1 seed program, and therefore have a previous, pre-final release version of 10.9.1 on my MacBook Air. Can I update to the final version in the usual way, through the App store update?
I do not have posting privileges on that forum. I did use the forum to send a message to Apple but have not got a reply yet.
Similar Messages
-
Problems Installing Designer 6.0 over Oracle 8i (Linux SUSE 8.0)
I have problems installing Designer 6.0 over Oracle 8i (Linux SUSE 8.0). When I try to create the repository the installation hang up. I try over Oracle 8i (WIndows 2000) and the problems remain.
Please any body can help?
Is it possible to install Designer 6i and generate forms 6.0 (I mean for using Developer 6.0 (NOT 6i))?
Best regards,
JAGCMarcel,
I had the same problem. Oracle gives as an answer that Designer 6.0 is not supported against 8.1.7. In the specified package a statement is issued which is a problem for 8.1.7. I changed that package and now it works fine.
Comment as below and replace with the delete statement, then it compiles fines.
I don't know if any problem can occur after that, but a Migration from a 1.3.2 repository to 6i works fine through this repository. Hope this helps.
Kind Regards
Jan Boersma
Email: [email protected]
see here:
-- Remove Reserved Names entry and comment
-- delete from sdd_reserved_names
-- where (rn_res_name, rn_type) in ((upper(view_name), 'VIEW')
-- ,(upper(pack_name), 'PACKAGE')
-- ,(upper(pack_name), 'PACKAGE BODY')
-- ,(upper(app_view_name), 'VIEW BODY'));
delete from sdd_reserved_names
where ((rn_res_name = UPPER(view_name) AND rn_type = 'VIEW') OR
(rn_res_name = UPPER(pack_name) AND rn_type = 'PACKAGE') OR
(rn_res_name = UPPER(pack_name) AND rn_type = 'PACKAGE BODY') OR
(rn_res_name = UPPER(app_view_name) AND rn_type = 'VIEW BODY'));
null -
Error while Installing and Starting SAP Widget Development Tools
Hi All,
I have downloaded Eclipse: eclipse-SDK-3.3.2-win32.zip from http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops/R-3.3.2-200802211800/eclipse-SDK-3.3.2-win32.zip
I am following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc
for Installing and Starting SAP Widget Development Tools as an Eclipse Plug-in
I am very new to it, So I was following Step by Step procedure.
On the 16th step I am getting an error:
AP Widget Templates (0.12.0.1167) requires feature "org.eclipse.gef (3.3.0)", or equivalent.
I had download the SAP Widget Development Tools.zip file from https://www.sdn.sap.com/irj/sdn/downloads?rid=/webcontent/uuid/b03b6544-c741-2a10-8999-ed04eb2b2c71
While unzipping the eclipse-SDK-3.3.2-win32.zip, there were two errors:
The System cannot find the file specified &
The file name or extension is too long.
I ignored them and continued the unzipping.
Please guide me as to how we can solve this error.
Ankur
Is it because I am using Eclipse 3.3.2 and not 3.3.0? If yes from where I can download Eclipse 3.3.0
Edited by: ankur malhotra on Jul 25, 2008 7:36 AMHi Ankur,
This happens sometimes because of the Eclipse that you use. Download the Eclipse JEE Version. When you go to eclipse.org and try to download eclipse you can do a comparision of the versions there, You download the version which supports all the web features.
http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/ganymeder
Check the above link you will be able to see the package details. Please download this Java IDE for EE developers and try installing the SAP widgets foundation then, If you are facing any problems in installing the plugins thru local archived site please let me know.
Regards,
Sai -
Can i install windows 8.1 over xp in bootcamp
Can I install windows 8.1 over xp in bootcamp?
Is it on the system drive? on its own drive or is it large enough?
Windows 8.1 will run even without Apple's drivers just fine except for a couple items.
Boot Camp forum probably is best place.
Boot Camp is software (and a forum) as in drivers and Boot Camp Assistant.
You have to do a "custom" clean install, you can't upgrade from within XP, you should of course be using 64-bit and Pro for supporting two cpus. -
Cannot install SQL Server 2008 R2 Developer on Windows 8.1
I am unable to install SQL Server 2008 R2 Developer edition on Windows 8.1 Enterprise evaluation and about 3/4 of the way through the installation I get this error msg:
TITLE: SQL Server 2008 R2 Setup
The following error has occurred:
Attempted to perform an unauthorized operation.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0&EvtType=0x88792597%25400xBB814387
This is my log file:
Overall summary:
Final result: User cancelled
Exit code (Decimal): 0
Exit message: User cancelled
Start time: 2014-04-23 23:49:10
End time: 2014-04-24 00:03:44
Requested action: Install
Machine Properties:
Machine name: PC
Machine processor count: 2
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: F:\My Files\My Downloads\EXISTING\SQLServer2008R2Dev\SQLFULL_ENU\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP: <empty>
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: NT AUTHORITY\SYSTEM
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: PC\computername
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140423_234604\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,OCS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: PC\computername
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140423_234604\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Analysis Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Integration Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Connectivity
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools SDK
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Business Intelligence Development Studio
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Books Online
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140423_234604\SystemConfigurationCheck_Report.htm
I tried installing as adminstrator and in compatability mode with Windows 7/Vista but that didn't work. Trying to install from the dvd or from the extracted files in my drive made no difference.
I am now wondering if there is a download link for SQL Server 2008 R2 Developer edition with SP2 included (i.e. not just SP2 but the whole application (5GB+) otherwise I am not sure how to install this.Hello,
1. Please refer to solution provided in below thread
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/61d56f64-2575-4a58-9503-84579476afaf/sql-server-2008-setup-error-attempted-to-perform-an-unauthorized-operation?forum=sqlsetupandupgrade
2. Make sure you stop antivirus services during running the setup.Make sure you Right click on setup.exe file and select run as administrator.
If above does not works include below as well
3. Please verify WMI service is started.
If WMI is started, consider to repair WMI.
http://windowsxp.mvps.org/repairwmi.htm
Reference
Link
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Error in installing SAP Netweaver 2004s SR2 Developer Workplace
Hi,
I am installing "SAP Netweaver 2004s SR2 Developer Workplace". Got the below error :
CJS-30005 Cannot change SAPDrive for system JP1 from D: to C:: share saploc exists.
ERROR 2007-03-08 09:35:06
FCO-00011 The step createFirstSystemDirectories with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|6|0|createFirstSystemDirectories was executed with status ERROR .
Can anybody know the reason for this. and how to resolve this error.
Thanks.Was able to move to next step by removing all the registry entries related to previous intallation.
-
How to install the EUL5 Business Area and seeded reports for Ora Apps 11i
Hi All,
We have to install the EUL5 Business Area and seeded reports for Ora Apps 11i.
I think there are scripts which need to be executed to create the BA and the Disco seeded reports. I am kind of confused about the whole think. Any pointers as to where to look foe the scripts would be really appreciated.
I am using disco version 10.1.2.48.18.
Thanks.Hi,
You need to work though Metalink Note 313418.1.
Rod West -
Able to install Acrobat 9.1 over the pre-release build
I am able to install Acrobat 9.1 over the pre-release build, however, the release notes say otherwise i.e. to un-install the pre-release build before installing the 9.1 release. Let me know whether to log a bug for the same.
I do not have posting privileges on that forum. I did use the forum to send a message to Apple but have not got a reply yet.
-
I get the message that another version of LabVIEW 6.0 is already installed and it won't let me install 6.0. How do I get rid of the evaluation version?
I don't have LabVIEW in my Add/Remove Programs. I may have at one time, but
can't remember. The removal must have been incomplete becasue LabVIEW 6.0
says "Another version of this produce is already installed." The same thing
happens if I try to reinstall the evaluation version.
Ron
JeffD wrote in message
news:AJSO6.29900$[email protected]..
> Do you get an error when you try to un-install the eval version? I am able
> to successfully remove it, via Add/Remove Programs in Control Panel.
>
> Jeff
>
> "Raytheon Ron" wrote in message
> news:[email protected]..
> > How do I install LabVIEW 6.0 over the evaluation version? I can't
> > un-install the evaluation version.
> >
> > I get
the message that another version of LabVIEW 6.0 is already
> > installed and it won't let me install 6.0. How do I get rid of the
> > evaluation version?
>
> -
I am trying to install Lion OS X over Mac OS X Snow Leopard 10.6.8
I am trying to install Lion OS X over Mac OS X Snow Leopard 10.6.8
I get an error message: "There are currently other logged in users who must be logged out before you install Mac OS X".
I switch to log out other users and deleted everyone listed. It still says: ....
There is no one else left. I don't know what to do now.
BillI don't know what you mean by "I switch to log out other users and deleted everyone listed" -- if other user accounts are on your Mac you just need to log them out, not delete anything -- but it may be that there are other user accounts you aren't aware of on the Mac.
Are you an admin user? Did you originally set up this Mac? -
Install iTunes 10.7 over iTunes 11?
greetings,
my question is:
how does one install iTunes 10.7 over iTunes 11 if one has iTunes 10.7.dmg?
here's where i am now:
this mac has OSX 10.7.5. i tried iTunes 11 a month ago on an older mac that i'm getting rid of. it has a bad bug and doesn't work right with my 120Gig iPod. so i can't use it. haven't had time to report the bug yet, but it's on my list to do...
somehow iTunes 11 showed up on my work MBPro yesterday without running software updater. i always decline installing iTunes 11. i used iTunes 10.7 tues night. and last night (wed) when i plugged in my iPod, i got the new software license screen "accept/decline" etc. i checked get info on iTunes in /Applications, and sure enough, it shows version 11.0.1 and a modificaiton date of wed morning (?). i was in meetings most of the day and software NEVER ran... but i digress...
regardless of how this happened, i'm trying to fix this and reinstall the previous version...
i found and downloaded iTunes 10.7 installer on apple's website. but when i run the installer, i get a message "iTunes can't be installed on this computer because a newer version is already installed"... never seen this before...
so i tried deleted iTunes 11.0.1, and get a message "iTunes can't be modifed or deleted because it is required by OSX"! ??
i've never seen this before either.
so i assumed i need to boot from an external drive so that i can delete iTunes... we have no "boot" dvd anymore. but i have an exteral drive with the complete OS and various utilites so that i can boot from an external disc in case i can't boot from the internal drive or need to run a utility like diskwarrior... but my company has forced a third party disc encryption software. so this prevents me from mounting the internal drive when i've booted from my external drive. there goes all of my repair and recovery tools, but i digress...
this is a new MBPro. it took me forever to configure and get software installed because of the shenanigans of the companies IT department and the lack of physical media from Apple and other software vendors. i just finished the same day i had to leave on a trip.
so i'm trying to figure out how to install iTunes 10.7 if iTunes 11 is already installed.
i'd appreciate any suggestions.ok, found a way to delete iTunes from terminal
sudo -rf /Applications/iTunes
then i can run the installer for iTunes 10.7... -
Okay, running kuler Desktop on my Mac, G5 PPC running 10.5.8 OS.
I downloaded kuler Desktop, figured it looked like an awesome way to speed up my using this online tool and even bring swatches directly into my CS3 apps.
However, I have AIR installed, kuler Desktop, and when I went to use the Photoshop or Illustrator import options, it immediately popped up saying I had to install Switchboard. Fine. I downloaded it, installed it, restarted kuler Desktop.
It did it again. Okay, fine. I dumped everything, including kuler Desktop, re-installed everything, even restarted the whole computer. But when I go to do anything other than download it to the desktop, when I go to bring it into any of the CS3 apps, I keep getting the same "You must install Switchboard" option. And yes, I've tried dumping the plist and preferences files as well, to no avail. And yes, the applications I've tried have been open at the time. I did some searching and reading on this before posting about it, to try and find if someone had reported a similar issue. But nobody mentioned the Switchboard install thing coming up over and over again, just that the feature wasn't working, so I thought I'd post specifically about this to see if it's the same issue or if there's as yet a solution for it so it works properly.
What's going on? Is kuler Desktop for Mac just fundamentally not yet working right or what?
I really want to use this app, but if all I can do with it is download the straight ASE files to my desktop, I might as well dump it and go back to using the online version since that at least is a bigger display. I like the desktop version because it's fast, directly on my computer, and has this advertised import-into-CS3 option that would save me some time if it worked. I've attached a screen capture so you can see exactly what I keep getting when this happens.
Any help to clarify this or correct it would be greatly appreciated. Thanks!Reboot your computer, then try to log in.
-
Somehow after upgrading to OSX Maverick I downloaded new pages version and loved it. Somehow l LAST WEEK I downloaded the old version of
pages and now the new pages files wont open? How do I uninstall the old pages?You should be able to reinstall the new version.....
Out of curiosity, how did you install the old version over the new? I would have thought that was impossible.
Barry -
Can I install Snow Leopard directly over Tiger?
Running iMac 7,1 on Tiger (10.4.11). Have 1 GB RAM and a 2 GHz Intel Core 2 Duo processor. Can I install Snow Leopard
directly over Tiger?Yes, you will be upgrading your system, take a look at this link, http://support.apple.com/kb/HT4949
-
I just installed lihtroom CC, and in develop module, the picture is blue. when I used the before after, the picture before is normal, and the after appears still blue.
I don't know what to do?Refer below link :
https://forums.adobe.com/thread/1823307
Lightroom 6 is displaying a blue screen with a white X through it in the Develop module for all my photos
Maybe you are looking for
-
IPod Not Recognized by my Computer?
I am using a Windows 7 computer and my iPod is no longer recognized by my computer, or iTunes. It will charge, but not show up on iTunes or even make a sound that shows iTunes knows it's there. So all I get is the charging "ping". I have updated iTun
-
How to go back to a previous version of NI Motion
Has anyone tried going back to an older version of NI Motion? Specifically I loaded labview 8.5 and NI Motion 7.6 on to my computer after having run Labview 6.1 and NI Motion 5.1.1 successfully for seven year. The newer version is not compatible wi
-
Hi Gurus, I created a purchase order for a particular quantity of 15000 No.s and after that when GR is made using MIGO trans code system displays "Document xxxxxxx does not contain any selectable items". Although the PO is made fresh, why GR is not a
-
EIS 9.3.1 Software
Hi All - Can you please provide me the link to download EIS server/client 9.3.1 version? I just want to test some drill through reports for my company and if it works as expected, we may buy the licenses. Thanks in advance!!
-
Class to run standard SAP Query
Hi, Could you help me with finding standard SAP class to run query created in SQ01? Thank you