Install 10gr2 ASM on single node, need clusterware installe first?
Install 10gr2 ASM on single node, Do I need install clusterware first?
When I install clusterware on single node, it shows " the specified nodes are not clusterable"
Thanks.
ASM and clusterware are two separate things. Clusterware is required only if you are setting up a RAC environment, is this your case? If you are just planning to use ASM then proceed with the RDBMS (database disk) install and use the DBCA to perform ASM configuration. It is assumed you have the raw devices ready to setup the ASM instance. Once the ASM instance is ready you can create the database to use the ASM disks.
~ Madrid
http://hrivera99.blogspot.com/
Similar Messages
-
Clone multi-node RAC and ASM to single node
Hi everyone.
I need clone system with 3 application server and 2 oracle database RAC and ASM to single-node. The operating system is RHEL 5.
I see some metalink notes, but we can't found nothing. I find notes with multi-node to single-node, but nothing with RAC to non-RAC.
The eBS version is 11.5.10.2 and database version is 10.2.0.3
Is possible this clone?
Thanks very much.Hi User;
Please follow below and see its helpful:
EBS R12 with RAC and non-RAC
Re: RAC to single instance ebs R12
Re: Clone Oracle Apps 11.5.10.2 RacDB to Non-RAC DB
Re: CLONING R12 RAC to NON RAC CLONING giving error RMAN-05517 temporary file
[b]Migrating the DB-Tier (DB and CM) to Two node non RAC cluster[/b]
Also check:
http://www.oracle.com/technology/pub/articles/chan_sing2rac_install.html
Regard
Helios -
Install RAC OBS on single node using VMWare
Re: How to install Muti_node R12 using VMWARE
Mine is a little different.
I have the Test server which has OEL5 and one OAS 10g(Oracle application Server) with 10g database.
I want to install RAC OBS on this server by installing VMWare for the single node. I do not want to wipe out the OAS, reinstore OSL5 and start from a blank machine.
Can I keep what I have on the server and install RAC OBS by installing VMWare, configuring the virtual sharing disks, and install RAC OBS using ASM?Hi,
Can I keep what I have on the server and install RAC OBS by installing VMWare, configuring the virtual sharing disks, and install RAC OBS using ASM?Yes, you can. Just make sure you have sufficient resources on this machine.
Note: 388577.1 - Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388577.1
Regards,
Hussein -
ASM in single node,windows32bit
Hello Experts,
I am new to oracle.
is it possible to implement ASM(oracle10g) in single node 32bit windows server?
thanks ,
Raju
Edited by: user4487322 on May 2, 2010 1:53 AM
Edited by: user4487322 on May 2, 2010 1:55 AMHi,
Please refer to below doc for better understanding
http://www.idevelopment.info/data/Oracle/DBA_tips/Automatic_Storage_Management/ASM_10.shtml
- Pavan Kumar N -
Root.sh fails on second node during clusterware installation
I am setting up a test instance of OEL 5.4 using VMware.
I am running the clusterware install and it is failing only on node2. See below.
I followed note 414897.1 on metalink for raw device setup.
Any help would be greatly appreciate.
2010-09-01 11:58:21.084: [ default][1275584]a_init:7!: Backend init unsuccessful : [22]
2010-09-01 11:58:21.091: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]ibctx:1:ERROR: INVALID FORMAT
2010-09-01 11:58:21.091: [ OCRRAW][1275584]proprinit:problem reading the bootblock or superbloc 22
2010-09-01 11:58:21.097: [ OCRRAW][1275584]propriogid:1: INVALID FORMAT
2010-09-01 11:58:21.139: [ OCRRAW][1275584]propriowv: Vote information on disk 0 [u01/app/oracle/oradata/ocr] is adjusted from [0/0] to [2/2]
2010-09-01 11:58:21.191: [ OCRRAW][1275584]propriniconfig:No 92 configuration
2010-09-01 11:58:21.192: [ OCRAPI][1275584]a_init:6a: Backend init successful
2010-09-01 11:58:21.299: [ OCRCONF][1275584]Initialized DATABASE keys in OCR
2010-09-01 11:58:21.555: [ OCRCONF][1275584]Successfully set skgfr block 0
2010-09-01 11:58:21.557: [ OCRCONF][1275584]Exiting [status=success]...Oracle 10gR2 RAC Installation in RedHat 5 Linux Using VMware.
Important points to install 10gR2 oracle RAC in linux5.
1.LINUX 5(Redhat 5) doesn't have /etc/sysconfig/rawdevices file. so we have to configure it.
2. Edit the /etc/redhat-release version to redhat-4 and and to invoke the runInstaller use the command
$runInstaller -ignoreSysPrereqs. //this will bypass the os check //
3. Next during clusterware installation at the end of root.sh in node 2 end with error message.So we have adjust the parameters in vipca and srvctl files.
4. vipca will fail to run. so we have to adjust some parameters and configure it manually.
refer the link, it will be useful to you to complete your installation.
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html -
Moving RAC/ASM to single-node non-rac SET NEWNAME not working
Good morning,
I'm trying to restore a rac/asm database to a non-rac environment to simulate disaster recovery under worst-case circumstances.
Here is as faras I have been able to get
1) Restored pfile
2) modified pfile to remove references to RAC settings (note, did not set db_file_create_dest, db_file_name_convert, etc)
3) Restored controlfile successfully
4) Mounted database
At this time I run the following rman script which covers all temp and datafiles (there's some skipped numbers where datafiles have been removed previously)
run {
set until time "to_date('2009/11/29 03:00:00','YYYY/MM/DD HH24:MI:SS')";
set newname for tempfile 1 to '/mnt/data/oradata/pmi/temp_1.dbf';
set newname for datafile 1 to '/mnt/data/oradata/pmi/system_1.dbf';
set newname for datafile 2 to '/mnt/data/oradata/pmi/undotbs1_2.dbf';
set newname for datafile 3 to '/mnt/data/oradata/pmi/sysaux_3.dbf';
set newname for datafile 4 to '/mnt/data/oradata/pmi/undotbs2_4.dbf';
set newname for datafile 5 to '/mnt/data/oradata/pmi/undotbs3_5.dbf';
set newname for datafile 6 to '/mnt/data/oradata/pmi/users_6.dbf';
set newname for datafile 7 to '/mnt/data/oradata/pmi/atend1_7.dbf';
set newname for datafile 8 to '/mnt/data/oradata/pmi/atendidx1_8.dbf';
set newname for datafile 9 to '/mnt/data/oradata/pmi/cwmlite_9.dbf';
set newname for datafile 10 to '/mnt/data/oradata/pmi/datafeedsidx1_10.dbf';
set newname for datafile 11 to '/mnt/data/oradata/pmi/drsys_11.dbf';
set newname for datafile 12 to '/mnt/data/oradata/pmi/dynamic1_12.dbf';
set newname for datafile 13 to '/mnt/data/oradata/pmi/dynamicidx1_13.dbf';
set newname for datafile 14 to '/mnt/data/oradata/pmi/intermedia_14.dbf';
set newname for datafile 15 to '/mnt/data/oradata/pmi/notesidx1_15.dbf';
set newname for datafile 16 to '/mnt/data/oradata/pmi/odm_16.dbf';
set newname for datafile 18 to '/mnt/data/oradata/pmi/pacific_data_large_18.dbf';
set newname for datafile 19 to '/mnt/data/oradata/pmi/pacific_data_medium_19.dbf';
set newname for datafile 20 to '/mnt/data/oradata/pmi/pacific_data_small_20.dbf';
set newname for datafile 21 to '/mnt/data/oradata/pmi/pacific_data_xlarge_21.dbf';
set newname for datafile 22 to '/mnt/data/oradata/pmi/pacific_index_large_22.dbf';
set newname for datafile 23 to '/mnt/data/oradata/pmi/pacific_index_medium_23.dbf';
set newname for datafile 24 to '/mnt/data/oradata/pmi/pacific_index_small_24.dbf';
set newname for datafile 25 to '/mnt/data/oradata/pmi/pacific_index_xlarge_25.dbf';
set newname for datafile 26 to '/mnt/data/oradata/pmi/pmi_data_large_26.dbf';
set newname for datafile 27 to '/mnt/data/oradata/pmi/pmi_data_medium_27.dbf';
set newname for datafile 28 to '/mnt/data/oradata/pmi/pmi_data_small_28.dbf';
set newname for datafile 29 to '/mnt/data/oradata/pmi/pmi_data_large_29.dbf';
set newname for datafile 30 to '/mnt/data/oradata/pmi/sysaux_30.dbf';
set newname for datafile 31 to '/mnt/data/oradata/pmi/pmi_data_xlarge_31.dbf';
set newname for datafile 32 to '/mnt/data/oradata/pmi/pmi_index_large_32.dbf';
set newname for datafile 33 to '/mnt/data/oradata/pmi/pmi_data_medium_33.dbf';
set newname for datafile 34 to '/mnt/data/oradata/pmi/pmi_index_medium_34.dbf';
set newname for datafile 35 to '/mnt/data/oradata/pmi/pmi_index_small_35.dbf';
set newname for datafile 36 to '/mnt/data/oradata/pmi/pmi_index_xlarge_36.dbf';
set newname for datafile 38 to '/mnt/data/oradata/pmi/portal30_38.dbf';
set newname for datafile 39 to '/mnt/data/oradata/pmi/portal_app_helpdesk_39.dbf';
set newname for datafile 40 to '/mnt/data/oradata/pmi/static1_40.dbf';
set newname for datafile 41 to '/mnt/data/oradata/pmi/staticidx1_41.dbf';
set newname for datafile 42 to '/mnt/data/oradata/pmi/tools_42.dbf';
set newname for datafile 43 to '/mnt/data/oradata/pmi/xdb_43.dbf';
set newname for datafile 44 to '/mnt/data/oradata/pmi/pmi_index_small_44.dbf';
set newname for datafile 46 to '/mnt/data/oradata/pmi/pmi_index_medium_46.dbf';
set newname for datafile 47 to '/mnt/data/oradata/pmi/pmi_data_small_47.dbf';
set newname for datafile 48 to '/mnt/data/oradata/pmi/pmi_index_large_48.dbf';
set newname for datafile 49 to '/mnt/data/oradata/pmi/pmi_index_xlarge_49.dbf';
set newname for datafile 50 to '/mnt/data/oradata/pmi/system_50.dbf';
set newname for datafile 52 to '/mnt/data/oradata/pmi/pmi_data_xlarge_52.dbf';
set newname for datafile 54 to '/mnt/data/oradata/pmi/pmi_index_medium_54.dbf';
set newname for datafile 55 to '/mnt/data/oradata/pmi/acctdb_data_55.dbf';
set newname for datafile 56 to '/mnt/data/oradata/pmi/acctdb_index_56.dbf';
set newname for datafile 57 to '/mnt/data/oradata/pmi/pivot_data_57.dbf';
set newname for datafile 58 to '/mnt/data/oradata/pmi/pmiaudit_data_58.dbf';
set newname for datafile 59 to '/mnt/data/oradata/pmi/pmiaudit_indx_59.dbf';
allocate channel D1 device type disk;
restore database;
switch datafile all;
release channel D1;
When I run this I get the following:
creating datafile fno=3 name=/mnt/data/oradata/pmi/sysaux_3.dbf
released channel: D1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/09/2009 09:32:33
ORA-01119: error in creating database file '+PMI2'
ORA-17502: ksfdcre:4 Failed to create file +PMI2
ORA-15001: diskgroup "PMI2" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
I noticed that it's trying to create the datafile. Shouldn't it be giving me a "Restoring datafiles from backup piece" clause? Also it appears to be trying to recreate the datafiles in their old location. Any thoughts on how to get around this.
Using the db_file_name_convert does allow me to restore files to the filesystem, but they use names such as "omf_*" and I'm not sure if it's converting the files properly from ASM format.
Thanks!Hi,
I assume your problem is either in your pfile ( but you indicate you have removed all RAC settings), or in your control file.
I would recommend to remove the control files and create them later as soon as the datafiles have been restored, using the commands:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "OMST01" NORESETLOGS FORCE LOGGING NOARCHIVELOG
-- SET STANDBY TO MAXIMIZE PERFORMANCE
MAXLOGFILES 100
MAXLOGMEMBERS 2
MAXDATAFILES 1024
MAXINSTANCES 8
MAXLOGHISTORY 10210
LOGFILE
< your logfiles >
DATAFILE
< your datafiles >
CHARACTER SET <your character set>;So the steps are
Startup nomount with the pfile
Restore the datafiles using rman
Shutdown the database
Use above script to create the control files
It is possible you need to use the RESETLOGS option instead of the NORESETLOGS
HTH -
Installing full LR3 after Trial Version; need to uninstall first?
I'm currently running LR3 Trial version on my Mac but I decided to buy the full version. Do I need to uninstall the trial version before installing the full version?
Thanks.All you need to do is enter the serial number into the trial version. In fact if you purchased a boxed set with a CD, do not bother to load LR3 from the CD as it will most likely not be the most current version (3.7)
John
John G. Blair Studio
Occidental, California -
How to clone a 11.1.0.7 oracle single node db with asm instance
We need to clone a 11.1.0.7 environment with single node db plus asm storage used.
I googled everywhere , and a lot notes on ASM with RAC cluster clone provided but no document for ASM with single node.
Please help.
Thanks9233598 wrote:
We need to clone a 11.1.0.7 environment with single node db plus asm storage used.
I googled everywhere , and a lot notes on ASM with RAC cluster clone provided but no document for ASM with single node.
Please help.
Thanks
9233598 wrote:
We need to clone a 11.1.0.7 environment with single node db plus asm storage used.
I googled everywhere , and a lot notes on ASM with RAC cluster clone provided but no document for ASM with single node.
Please help.
Thanks
RMAN> DUPLICATE DATABASE -
GI installation on a single-node cluster error.
Hello, I am trying to install GI on a single-node cluster (Solaris 10 / Sparc) but the root.sh script fails with the following error (this is not a GI installation for a Standalone Server :
root@selvac./dev/ASM/OCRVTD_DG # /app/oracle/grid/11.2/root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /app/oracle/grid/11.2
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /var/opt/oracle/oratab file...
Entries will be added to the /var/opt/oracle/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /app/oracle/grid/11.2/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
ACFS-9200: Supported
ACFS-9300: ADVM/ACFS distribution files found.
ACFS-9312: Existing ADVM/ACFS installation detected.
ACFS-9314: Removing previous ADVM/ACFS installation.
ACFS-9315: Previous ADVM/ACFS components successfully removed.
ACFS-9307: Installing requested ADVM/ACFS software.
ACFS-9308: Loading installed ADVM/ACFS drivers.
ACFS-9327: Verifying ADVM/ACFS devices.
ACFS-9309: ADVM/ACFS installation correctness verified.
CRS-2672: Attempting to start 'ora.mdnsd' on 'selvac'
CRS-2676: Start of 'ora.mdnsd' on 'selvac' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'selvac'
CRS-2676: Start of 'ora.gpnpd' on 'selvac' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'selvac'
CRS-2672: Attempting to start 'ora.gipcd' on 'selvac'
CRS-2676: Start of 'ora.cssdmonitor' on 'selvac' succeeded
CRS-2676: Start of 'ora.gipcd' on 'selvac' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'selvac'
CRS-2672: Attempting to start 'ora.diskmon' on 'selvac'
CRS-2676: Start of 'ora.diskmon' on 'selvac' succeeded
CRS-2676: Start of 'ora.cssd' on 'selvac' succeeded
ASM created and started successfully.
Disk Group OCRVTD_DG created successfully.
The ora.asm resource is not ONLINE
Did not succssfully configure and start ASM at /app/oracle/grid/11.2/crs/install/crsconfig_lib.pm line 6465.
/app/oracle/grid/11.2/perl/bin/perl -I/app/oracle/grid/11.2/perl/lib -I/app/oracle/grid/11.2/crs/install /app/oracle/grid/11.2/crs/install/rootcrs.pl execution failed
I also found the "PRVF-5150: Path OCRL:DISK1 is not a valid path on all nodes" error but as I have read it is a bug I Ignored it. But...
I think my ASM_DG OCR and voting is ok, accessible by grid user and 660. It seems ASM does not start or does not start in time.
Any help is wellcome.
Thanks in advance.Thanks a lot for the hint. I had already checked this doc. but I think it is not the problem. Actually de error ora.asm is not online is not correct. After failing root.sh, ora.asm is ONLINE:
root@selvac./app/oracle/grid/11.2/bin # ./crsctl check resource ora.asm -init
root@selvac./app/oracle/grid/11.2/bin # ./crsctl stat resource ora.asm -init
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=ONLINE on selvac
The last part of the /app/oracle/grid/11.2/cfgtoollogs/crsconfig/rootcrs_selvac.log file reads :
>
ASM created and started successfully.
Disk Group OCRVTD_DG created successfully.
End Command output2011-04-14 13:24:16: Executing cmd: /app/oracle/grid/11.2/bin/crsctl check resource ora.asm -init
2011-04-14 13:24:17: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:17: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:17: Checking the status of ora.asm
2011-04-14 13:24:22: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:22: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:22: Checking the status of ora.asm
2011-04-14 13:24:27: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:28: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:28: Checking the status of ora.asm
2011-04-14 13:24:33: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:33: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:33: Checking the status of ora.asm
2011-04-14 13:24:38: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:38: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:38: Checking the status of ora.asm
2011-04-14 13:24:43: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:43: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:43: Checking the status of ora.asm
2011-04-14 13:24:48: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:49: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:49: Checking the status of ora.asm
2011-04-14 13:24:54: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:54: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:54: Checking the status of ora.asm
2011-04-14 13:24:59: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:59: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:59: Checking the status of ora.asm
2011-04-14 13:25:04: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:25:04: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:25:04: Checking the status of ora.asm
2011-04-14 13:25:09: The ora.asm resource is not ONLINE
2011-04-14 13:25:09: Running as user grid: /app/oracle/grid/11.2/bin/cluutil -ckpt -oraclebase /app/grid -writeckpt -name ROOTCRS_BOOTCFG -state FAIL
2011-04-14 13:25:09: s_run_as_user2: Running /bin/su grid -c ' /app/oracle/grid/11.2/bin/cluutil -ckpt -oraclebase /app/grid -writeckpt -name ROOTCRS_BOOTCFG -state FAIL '
2011-04-14 13:25:10: Removing file /var/tmp/mbahSaGPn
2011-04-14 13:25:10: Successfully removed file: /var/tmp/mbahSaGPn
2011-04-14 13:25:10: /bin/su successfully executed
2011-04-14 13:25:10: Succeeded in writing the checkpoint:'ROOTCRS_BOOTCFG' with status:FAIL
2011-04-14 13:25:10: ###### Begin DIE Stack Trace ######
2011-04-14 13:25:10: Package File Line Calling
2011-04-14 13:25:10: --------------- -------------------- ---- ----------
2011-04-14 13:25:10: 1: main rootcrs.pl 322 crsconfig_lib::dietrap
2011-04-14 13:25:10: 2: crsconfig_lib crsconfig_lib.pm 6465 main::__ANON__
2011-04-14 13:25:10: 3: crsconfig_lib crsconfig_lib.pm 6390 crsconfig_lib::perform_initial_config
2011-04-14 13:25:10: 4: main rootcrs.pl 671 crsconfig_lib::perform_init_config
2011-04-14 13:25:10: ####### End DIE Stack Trace #######
2011-04-14 13:25:10: 'ROOTCRS_BOOTCFG' checkpoint has failed
So this must be a bug. During root.sh execution ora.asm is OFFLINE but after failing it is ONLINE. It maight be a question of waiting/repeating or timeout as I see the "Checking the status of ora.asm" command is repeated several times during root.sh, but not enough perhaps. Now root.sh is failed, installation halted but ASM is ONLINE.
Any other Idea?
Thanks again. -
Oracle Single Node RAC - Oralce Clusterware Install
Hi
I want to install Oracle Clusterware to perform Active / Passive failiver for a 2 node cluster
I plan to use Oracle Single Node RAC for this and have Oracle Clusterware control the active passive failover.
However - I do not want to use ASM in any of my set-up.
We have a NetApp filer and are using NFS / NetApp technologies to control backups (Oracle snap manager).
Is this possible?
All the documents I have include reference to ASM
If I try and install Grid - I am also asked for ASM information.
I find ASM an un-necessary overhead given the storage we have and do want to use it,
Can anyone help?Hi,
no you don't need ASM to have RAC One Node. OCR and Voting disk can be on NFS, simply use Shared Disk location during installation, and you won't get asked about ASM.
http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDECEBGH
Especially http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDEDAHGB
What you should use in conjunction with NFS however is dNFS.
Regards
Sebastian -
Hi
I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit
I am following Oracle metalink document note id 466649.1 . My 11.2.0.3 clusterware is already setup correctly and working fine as per document E24614-03.
However I am currently stuck in section 3.3:Configure TNS listener (Doc id : 466649.1) . The netca is unable to start the listener and failing with error as below.
However when I start the same locally from lsnrctl command listener starts.
trace_OraDb11g_home1-1212159AM174.log
====================================
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:144] runCommand: process returns 123
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:161] RunTimeExec: output>
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr`
on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] CRS-2632: There are no more servers to try to place resource 'ora.jxn-ux-e
bs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:170] RunTimeExec: error>
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173] CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr'
has placement error.
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173]
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1221] signed exit value = 123
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1258] set status HA_RES_RELOCATE_ERR
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:84] Returned from executing the HA Operation
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q
.lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on m
ember `jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.
lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on me
mber `jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> CRS-2632: There are no more servers to try to place resource 'ora.jxn
-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:893] [HAStartOperation.run:95] ERROR> CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.l
snr' has placement error.
[AWT-EventQueue-0] [18:34:31:893] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
[AWT-EventQueue-0] [18:34:31:893] [HAOperationResult.getOutputAll:114] outLine is [CRS-2632: There are no more servers to try to place re
source 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy]
[AWT-EventQueue-0] [18:34:31:894] [HAOperationResult.getOutputAll:115] errLine is [CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_
JXN-UX-EBS1D1Q.lsnr' has placement error.]
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getNodeNameIndex:-1] getNodeNameIndex: Matching LISTENER_EBSQA_JXN-UX-EBS1D1Q
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getListenerRootName:-1] ListenerName is LISTENER_EBSQA
The crsctl has details as below:
=====================
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE jxn-ux-ebs2d1q
ora.LISTENER_SCAN2.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.LISTENER_SCAN3.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.cvu
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
1 ONLINE OFFLINE
ora.jxn-ux-ebs1d1q.vip
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs2d1q.LISTENER_EBSQA_JXN-UX-EBS2D1Q.lsnr
1 ONLINE OFFLINE
Not sure how to fix this .
Regards
RamI am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit You don't need to create listeners, after installing 11203 cluster there will be LISTENER running from $GRID_HOME
along with SCAN_LISTENERS -
How to migrate DB from single node 10gR2 to RAC 11gR2 on diff platform?
How to migrate DB from single node 10gR2 to RAC 11gR2 on different platform with possible minimum downtime? We have a situation of upgrade/migrate oracle 10gR2 single instance DB to 2-node RAC 11gR. The source OS is Solaris 10 on SPARC and the target OS is Linux (the target servers could be changed to Solaris 11 x86 if needed). What is the best solution on that?
Thanks,Technically, can do the following for upgrading and migration?
1. Create 11gR2 oracle home on the same server and upgrade the database from 10gR2 to 11gR2 by running conversion (2 hour down time?)
2. Set up Heterogeneous Primary and Physical Standbys by RMAN. The standby is the RAC with ASM. No need down time. (from Solaris Space to Linux - this may be a problem)
3. At the cutoff time, activate the standby DB from the RAC ASM.
If feasible, do we have some detail guild line for each step? -
Can ASM be used in single node 11g?
I tried to create DB in 11g using ASM, but I was asked to create oracle CSS services (which is for RAC). of course it failed. My platform is oracle linux 5. As I remember 10g can use ASM (in Solaris), any one has idea about 11g? how to use ASM (not RAC)? (I already used ASM in RAC 11g)
Thank you in advance.Although this is for Oracle 10gR2, here's a web page that might shed some light on your situation: Note that is says CSS is created automatically even if you don't use it.
http://download-west.oracle.com/docs/html/B10130_02/deinstall.htm#BCFBEEAJ
6.2 Removing Oracle Cluster Synchronization Services (CSS)
The first time you install Oracle Database, Oracle Universal Installer configures and starts a single-node version of the Oracle Cluster Synchronization Services (CSS) service. The CSS service enables synchronization between an Automatic Storage Management (ASM) instance and the database instances that rely on it for database file storage. It is configured and started even if you do not choose Automatic Storage Management as a storage mechanism for database files.
If you do not choose Automatic Storage Management as a storage option, you can delete OracleCSService. To delete this service without deleting the Oracle home, perform the following: -
Install 10gR2 on SLES9 w/ RAC/ASM
Hello,
I am going to install 10gR2 on SLES9 w/ RAC/ASM. Is there any step-by-step guide for it? Does 10gR2 ASM still need the voting disk and OCR disk though 10gR1 needs them? What kind of best remote access client to the server can you recommend?
Thanks in advance.My question "Does 10gR2 ASM still need the voting disk and OCR disk " actually is that "Does 10gR2 Clusterware still need the voting disk and OCR disk?".
Thanks. -
How best to slice disk drives? Single Node install on a Sun V480 (2 cpu's @ 900mhz, 2 disk drives @ 36gb each), solaris operating system. For my test server I will install all 10g components. How best to distribute the 10g load (oraInventory, appserver, infrastructure, Metadata Repository) between the two disk drives?
Part of the installation involves the installer installing CRS software on the other nodes, creating the ASM and RAC instances and so on.
All this is done in an automated fashion - requiring each node to be prepped accordingly, ssh keys generated, public keys distributed and added to authorised keys and so on.
None of these installation steps (all critical) will be part of a "single node" RAC install.
In fact, the prepping part is even more critical and complex than the actual installation - if done properly the installation will be smooth and painless. If not... you will run into all kinds of problems. And this is often the case as one has to deal with getting the shared devices to be seen by all nodes, ensure consistent device mappings across all nodes, ensure that multipath (load balancing) I/O works, etc.
For this at least 2 nodes are required. For actual proper RAC testing itself, even 2 nodes do not suffice and at least 3 are needed.
IMO you are pretty much wasting your time as no real practical RAC installation lessons will be learned mucking about with RAC and a single VM.
Maybe you are looking for
-
I need an example of CXF webservice to deploy on Weblogic 10.3.2 Portal Server
Hi All, I was struggling to deploy a simple CXF Webservice over WeblogicPortal 10.3.2. Can someone give steps using maven? Regards, Swaroop Kunduru.
-
How i can copy the script from one language to other language
dear all, how can i copy script i.e i changed =in EN, but i want copy convert same effects in DE (from one language to other language but not all language)
-
BT stack disappears after restart.
In a Portege M200 I downloaded the toshiba BT stack last version (3.10). Everything is ok during installation. BT devices are working properly (at least the headset). When I Power on again the pc, all BT stack files disappear(seems correctly unistall
-
Inserting integers in a Linked list/List in Java
Please solve the following problem using Java. Problem: Write a program that inserts 25 random integers from 0 to 100 in order in a linked list object. The program should calculate the sum of the elements and the floating-point average of the element
-
Final Cut Pro, Flash Video Encoder & Flash Player
Well, let's get started.... I'm getting real frustrated with Adobe. I emailed them about this problem two months ago and NEVER got a response. This is extremely unacceptable product support. We just purchased the Creative Suite Premium two months ago