Install 10gR2 RAC w/ iscsi chokes "filesystem too small for journal"

Following Jeff Hunter guide to install RAC on 10gR2 on Oracle Linux All has gone well to the point of:
[root@lin1 ~]# mkfs.ocfs2 -b 4k -C 32K -N 4 -L oracrsfiles /dev/sde1
mkfs.ocfs2 1.2.4
Filesystem too small for a journal
[root@lin1 firefox]# df -m
Filesystem 1M-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00 66272 1965 60941 4% /
/dev/cciss/c0d0p1 99 16 79 17% /boot
none 1 268 0 1268 0% /dev/shm
[root@lin1 ~]# uname -a
Linux lin1 2.6.9-55.0.0.0.2.ELsmp #1 SMP Wed May 2 14:59:56 PDT 2007 i686 i686 i386 GNU/LinGNU/Linux
Tried man mkfs.ocfs2 with the -J size=(various sizes in KB up to 100MB) (4MB is the min) but nothing takes. Certainly approx. 6GB free space is sufficient for journaling?? Any input very much appreciated.

Similar Messages

I just bought a new PC and I have re-installed my Adobe Creative Suite Standard on it. Software open fine. PROBLEM: The toolbars (menu stuff) appear extra-small, too small for me to read... I sent on the PC setting to try to change the display resolution.

I just bought a new PC and I have re-installed my Adobe Creative Suite Standard on it.
Software open fine. PROBLEM: The toolbars (menu stuff) appear extra-small, too small for me to read...
I went into the PC settings and tried to change the display resolution. This changes the size of all the icons (not only Adobe) but it does not solve the problem when I open an Adobe application (Photoshop or Illustrator)... The PC is run under Windows 8.1 and my display resolution is 3200x1800 (but again, when I change the settings for a smaller resolution, only the size of the icons is affected. Once I open the software, the problem is still there, extra-small toolbars...). Help!!!

Anything before CC is not high-DPI compatible. Feel free to continue to experiment with your system settings.
Mylenium

Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal

Hi All,
I am trying to implement Oracle 10g RAC on my laptop using vmware and openfiler software . But while executing the command
#mkfs.ocfs2 -b 4K -C 32K -N 4 -L oracrsfiles /dev/iscsi/crs11/part1
I am getting the error
Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal
Please anybody can help me to resolve this problem.
Thanks in Advance.

How large is the device that you are formatting?
The default journal size depends on the type specified. If none specified,
then it assumes "mail" which sets the default journal per slot to 256M.
If database type, default is 64M.
Use "-T database" to specify database type, etc.
BTW, one can always override the defaults. Say "-J size=16M" to make
a smaller journal.
man mkfs.ocfs2 and the user's guide has more.

Host Agent Service critical - Paging file is too small for this operation to complete

Hi all,
at the moment I have the problem that some of my hosts get in the errorstate critical in VMM 2012 SP1.
The error details in VMM are:
Error (2912)
An internal error has occurred trying to contact the hostname server: : .
WinRM: URL: [http://hostname:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/cimv2/Win32_Service], Filter: [select * from Win32_Service where Name="scvmmagent"]
The paging file is too small for this operation to complete (0x800705AF)
Recommended Action
Check that WS-Management service is installed and running on server hostname. For more information use the command "winrm helpmsg hresult". If hostname is a host/library/update server or a PXE server role then ensure that VMM agent is installed
and running.
On the host i cannot connect to FailoverCluster or Hyper.V Manager. After a restart of the host the Problem is gone and the System is working without any Problems for some days.
The paging file is set to 4GB and the OS is Server 2012.
The hosts have 192GB of RAM.
The configuration of the pagfile didn't change from Windows 2k8R2 to 2012.
I didn't find any Errors in the eventlog. Do you have any idea where to check for that?
Thanks,
Patrick

The hotfix didn't solve the Problem for me either. The WMI crash came again after a couple of weeks.
An additional problem with VDS was detected and the following hotfix was installed:
http://support.microsoft.com/kb/2884597/en-us
Also a problem with Clusterservice was found, sadly MS is tagging this handle leak as "won't fix".
Nevertheless one WMI Instance is still growing...
We are testing a hotfix that so far looks promising. Its a private hotfix only right now. But the file is listed as KB494704 you may want to ask your support engineer to look into it.

Azure + Sync Framework + Error: Value was either too large or too small for a UInt64

Hi,
We have an in-house developed syncronisation service built on the Sync Framework v2.1 which has been running well for over 2 years. It pushes data from a local SQLServer 2005 database to one hosted on Azure with some added encryption.
The service was stopped recently and when we try to re-start it, it fails with the error:
System.OverflowException: Value was either too large or too small for a UInt64.
at System.Convert.ToUInt64(Int64 value)
at System.Int64.System.IConvertible.ToUInt64(IFormatProvider provider)
at System.Convert.ToUInt64(Object value, IFormatProvider provider)
at Microsoft.Synchronization.Data.SyncUtil.ParseTimestamp(Object obj, UInt64& timestamp)
at Microsoft.Synchronization.Data.SqlServer.SqlSyncScopeHandler.GetLocalTimestamp(IDbConnection connection, IDbTransaction transaction)
I have found the Hotfix 2703853, and we are proposing to apply this to our local server, but we have found that running SELECT CONVERT(INT, @@dbts) on the local database returns 1545488692 but running the same query on the Cloud database returns -2098169504.
which indicates the issue is on the Azure side. Would applying the hotfix to our local server resolve the issue or would it need to be somehow applied to the Azure server?
Thanks in advance for any assistance!
Chris

Hi,
We have now applied the Sync Framework hotfixes to our server and re-provisioned the sync service. No errors were reported and the timestamp values were all within the required range. On re-starting the service the system worked as anticipated. It has now
been running for a week and appears to be stable. No further changes were required other than installing the hotfixes and re-provisioning the scope.
Chris

Vista & Outlook 2007: Sync with second XP & Outlook 2003 - The passed buffer is too small for the reply data

Dear Community,
I'm synchronising my T3 with two PCs. One with Vista & Outlook 2007 and the other with XP & Outlook 2003. Both with the latest conduit & Hotsync Manager versions installed for each OS based on the availability on the Palm Website.
My problem is that when I synchronise the T3 with either PC and then try to sync it with the other I'm receiving the following error message for the Calendar:
Outlook Calendar
The passed buffer is too small for the reply data.
OLERR:0D-0008
OLERR:0D-0004
OLERR:0D-0001
- Slow Sync
Outlook Calendar synchronization failed
The second time the sync is successful but takes a long time and the actual problem is that it creates duplicates for records previously changed on either PC - but with a sync in between those changes, i.e. no conflict in the sense that the same record was changed in both environments since the last sync. I have configured the conflict handling to establish a hierarchy PC1-T3-PC2 but try to avoid them by synchronising as often as possible.
Has anyone come across that problem or any ideas? Can you somehow adjust the buffer size for the sync? I have been using Lotus Organiser & then the various Outlook versions for a number of years.
Thank you
Rainer
Post relates to: Tungsten T3
Post relates to: Tungsten T3

As they say on TV, "Doh"!!!
I figured out the problem. I started the Sync tool, selected "Settings", then "Mcrosoft Outlook" tab and then "Select Folders" button. I browsed to the proper folders in Outlook (Calendar, Tasks, etc). Select OK enough times and retried the sync.
It worked.

How do I make icons bigger? All icons are way too small for speedy use. no matter what I do they remain too small. Is there a way of getting them the same size as previous versions?

All icons, such as refresh page, back, forward, stop and home etc; are just too small for comfortable use. For now I am uninstalling Firefox 4 and going back to 3.x. even the zoom page icons are too small.

"I had read that GarageBand or the Musical Typing there can sometimes not display properly when the resolution is changed."
Well, did you checked GB after you changed your resolution?
Which setting did you change to?
You & I have the same size iMac screen. My resolution setting is 1280x800. Everything fits perfectly in the windows & on desktop including the menu bar.
All info in my windows are showing. I did not need to adjust my browser font size settings. I am sure you are aware of the browser font size settings. I use FF & the settings are in Preferences>Content.
In the Finder window you can enlarge the icons & fonts also.
Finder>View>Show View Options.

All of a sudden the screen on my iMac 10,1 is too small for the image. Can't figure out how to reduce the size of the Finder or any of the Apps.

All of a sudden the screen is too small for the image. Hard to explain, but in order to see the entire Finder window, I must scroll the image up/down, left/right.
It's not just the Finder though, all of the apps are affected this way too.
It's probably got something to do with the fact that I have an HDMI cable running from the Mac to a Vizio 42" TV. It's been running this way just fine for over two months though.
Any ideas?

You probably accidently zoomed the screen. Hold down CNTL while scrolling down with the mouse or trackpad to unzoom. Cntl - scroll up to zoom.
Regards,
Captfred

"buffer too small for string or missing null byte" inserting CR in excel

I have created a Crystal Report based on below stored procedure.
DELIMITER $$
DROP PROCEDURE IF EXISTS `ww_test`.`PRD_Data_sp` $$
CREATE PROCEDURE `ww_test`.`PRD_Data_sp` (in cyear int, in cmonth int, in groupby varchar(20), in Inv_type varchar(4))
BEGIN
select
          CASE WHEN groupby='Date' THEN (p.FKDAT)
               WHEN groupby='SalesOrg' THEN CONCAT(p.VKORG,'_',p.VTWEG)
          END ,
          sum(p.QTYSAM),
          sum(p.CASESSOLD),
          sum(p.SOLDDOL)
          from ww_test.prd_data p
          where (month(p.FKDAT)=cmonth and year(p.FKDAT)=cyear) and
                 ((p.FKART) is null or not(p.FKART in ("FAZ","ZMBB","FAS",Inv_Type))) and
                 ((p.AUART) is null or not(p.AUART in ("ZMBB")))
          Group by
              CASE WHEN groupby='Date' THEN (p.FKDAT)
                   WHEN groupby='SalesOrg' THEN CONCAT(p.VKORG,'_',p.VTWEG)
              END
          Order by
              CASE WHEN groupby='Date' THEN (p.FKDAT)
                   WHEN groupby='SalesOrg' THEN CONCAT(p.VKORG,'_',p.VTWEG)
              END;
END $$
DELIMITER ;
I have used Add Command to create report based on this.
call ww_test.prd_data_sp({?Year},{?Month},{?GroupBy},{?InvType});
I am able to refresh the report in crystal and as well in Infoview without any problem.
But when i try to insert this report in Excel using Live Office it gives me error. I able to insert other crystal reports without any problem.
An error occurred while opening the report. The report does not exist; you have insufficient rights to open the report; or you cannot make a connection to the BusinessObjects Web Service. (LO 02010)
Failed to open report (LO 26619)
Cannot open report document
Buffer too small for string or missing null byte.
can anyone suggest where i am going wrong? Any input is appreciated.
Crystal Reports 2008
Live Office XI 3.1
BOEdge XI 3.1
Xcelsius 2008
Thanks ,
Madhavi

With the CurrentValue method
Crpt.ParamFields[3].CurrentValue := memo1.Text;
Is there another solution ?

Buffer too small for string - Crystal Report for Vs2010

Hello,
    I have recently upgrade my VS2010 project to Crystal Report for Visual Studion 2010.
    I have some reports that contains more than 512 characters in the Report Comments section.
    When I try to do a RptDoc.SaveAs(vPath, false) the following error is raised:
Buffer too small for string or missing null byte.
      at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.SaveAs in :line 0
      at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.SaveAs in :line 0
      at CrystalDecisions.CrystalReports.Engine.ReportDocument.SaveAs in :line 0
    This line SaveAs was working has expected with Crystal Report 2008. Any idea on why it is not working anymore.
Thank you.
Charles

Hello Don,
    I have start a little project to retest the behavior.
   I have create a new report in Crystal Report 2008 just by clicking New, Finish and Save.
   In a new Windows Application in Vs2010 ,I have added the following Crystal Report Reference.
    CrystalDecisions.CrystalReports.Engine, Version=13.0.2000.0
   CrystalDecisions.Shared, Version=13.0.2000.0
I have then try the following code and found out the limit of ReportComment is 511 but in the Crystal Report 2008 designer and runtime the limit did not apply.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
      Dim objRpt As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
      Dim i As Integer = 0
      Try
         objRpt.Load("c:\temp\empty.rpt", CrystalDecisions.Shared.OpenReportMethod.OpenReportByTempCopy)
         Do
            i += 1
            objRpt.SummaryInfo.ReportComments = New String("X", i)
         Loop
         objRpt.SaveAs("c:\temp\dfh_save.rpt", False)
      Catch ex As Exception
         MsgBox("i: " & i)
         MsgBox(ex.Message)
      End Try
End Sub
     I am able to put has many characters if I insert the report in the Vs2010 Solution.
     If you prefer I can send you my little project.
Thank you.
Charles
<code> should be
Edited by: Don Williams on Feb 4, 2011 12:47 PM

Paging file is too small for this operation to complete.

iTunes wont open. When I click on it, all it says is 'Paging file is too small for this operation to complete. Please help =)

Now it says Aplication Error - The aplication failed to initialize properly (0xc000012d)

Default text size in Compressor is too small for normal human eye

Is there any way to change the text size in Compressor 4 in the windows? I can't find any.
The normal default text size is way too small for any normal human being eye to read clearly.
Please, have mercy on us, whoever designed the tiny fonts! Not fair to the rest of us . . .

Well, guess we folk with not-too-good vision will simply have to keep on trucking the best we can, eh? We can't enlarge text, so as a result we can't use software like Compressor like the rest of the population. Sad to say, especially with a company like Apple . . .
Yeah, well I gave the Apple Compressor Team my feedback, just like I've done the last 3 months with other things, then of course the feedback from us all melts into the either, and we never really know if anyone reads it, like they say. Me thinks not. This is the only feedback I'll ever get, I'm afraid:
QUOTE:
Thank you for your feedback on Compressor.
We cannot respond to you personally, but please know that your message has been received and will be reviewed by the Compressor Team. If we need to follow up with you on your ideas for improving Compressor, we will contact you directly.
We appreciate your assistance in making Compressor better.
Compressor Team
Apple

How can I perform the conversion of pdf files in Cyrillic script to Word files in Cyrillic script. The pdf file is too small for me to read right now. Julyan Watts

How can I perform the conversion of .pdf files in Cyrillic script to Word files in Cyrillic script. The .pdf file is too small for me to read without a magnifying glass, and the document is more than one thousand pages.

This answer was not helpful. First of all, I could not find "tech specs"
anywhere on the Acrobat 11 homepage. And secondly I purchased this software
for the specific purpose of converting .pdf files to Word. It was only
after I had completed the purchase that I learnt that Acrobat does not
permit the conversion of .pdf files in Cyrillic to Word files in Cyrillic.
I feel that Acrobat should have provided this crucial information before I
allowed my credit card to be debited. That is why I am now asking for my
money back. But thanks for your attempt to solve my problem, even if it was
not successful.
Julyan Watts

Yosemite fonts too small for middle aged eyes

I just updated my desktop to Yosemite and am wishing I hadn't - the designers clearly don't have a clue what happens to normal eyesight in middle age. I am NOT vision impaired - just a little bit short-sighted (-1.5) and a little bit long-sighted (+1) and a little bit astigmatic, with up-to-date glasses that correct my sight properly. I am nonetheless finding using this new OS on my new 1920x1080 (non-Apple) monitor, which worked perfectly with Mavericks, absolute torture - all the text in menus, settings screens etc is just much too small for comfort, at least in the chosen font. In some apps I can use Cmd-+ to increase the font size, but there seems to be nothing I can do about the font sizes in Finder, Preferences etc
I have read the threads about the reasons and ways to mitigate the problem, and have increased contrast and reduced transparency in the Accessibility settings, and am considering running the script to change the default font back to Lucida Grande. But my point is that I have perfectly normal eyesight (for someone of 53) and have never had any screen problems before, so I shouldn't need to be using the Accessibility settings. I know it is fashionable among designers to create lots of blank white space, but white space doesn't compensate for illegibility!
I can see from all the threads on this topic that I am not alone. So please Apple, sort this out - usability must come first - and not just for the under 30s!

Even iBooks on MBP Retina !?
I love the iBooks app and use it specifically because of the "Night" appearance option, which turns the page background all black and the font white (similar to inverting the display). Fortunately books' font sizes remain adjustable as big as I want, but - I can no longer see page information (current page number and number of pages left to read) at the bottom of each page. The page information is barely visible (appears like small dark grey foggy font on a black background). This is very likely also the result of the Yosemite font fiasco. Not an issue when reading books in "Night" appearance on the iPad, (they didn't break it yet yet in iOS).
"Digital Books without page numbering information"!
A Huge design fiasco.

Trying to print a smiple 3 1/2 X 6 1/2 envelope and printer says too small for the job.I can print

Printer gives me an error message saying a 3 1/2 X 6 1/2 envelope is too small for job. However, I can print other envelopes with no problem. ex. 4 1/2 X 10. Printer model is a C6280.

Set-up a custom envelope with the size that you need.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Install 10gR2 RAC w/ iscsi chokes "filesystem too small for journal"

Similar Messages

Maybe you are looking for