Install 11.5.10 on USB portable hard disk media

can 11.5.10 be installed on a USB portable hard disk connected on a notebook/laptop computer. did any one do this? does it works with out problems?
these are some of the doubts i need to clarify.
any response to this will be appreciated
thanks

I had a friend that did that. I had to do a media recovery on the database when they lost power. The laptop went to battery, but the external USB drive crashed. Shortly afterward, they compressed their laptop drives and put 11i on the primary internal drive. On a 7200 rpm drive, it will be plenty fast for single user mode, even with compression.

Similar Messages

  • Portege M200 - Boot and restore ghost image trough USB Portable Hard disk

    Hi,
    I work in a company with several M200.
    I want to boot from a USB portable hard disk, and run a ghost image.
    How to recognize the usb hard disk and boot from it?

    Hello
    Im not sure but as far as I know its not possible to boot from USB HDD
    According the user manual you can boot from:
    -Built-in HDD
    -CD-ROM
    -FDD (or SD memory card)
    -Network (LAN)
    -PCA (ATA) card boot

  • Cannot open files in portable hard disk using USB 2.0

    My friend using a 20G Portable Hard disk and told me that he could not open files on it when he connected it to his iMac G5 with the USB 2.0 cable. He gave it to me and I found the same result with my iMac G5 2.0. I have tried using Disk Utility's repair but found the rainbow ball rolls on and on. Whenever I tried to open any files with Finder, the rainbow ball appears again.
    The portable hard disk is fine with PC and my friend said his G4 is alright with it too.
    Is the problem due to iMac?

    Also, try connecting the drive directly to a USB port on the iMac. The USB ports at the back of the keyboard are convenient but slow, since its built-in hub is USB 1.1. It supplies a total of 500 ma, the same "juice" as other hubs, but the Apple Pro Keyboard uses half of that.
    The ports on the iMac itself each supply the standard 500 ma, and are high speed USB 2 ports, so they are the preferred choice.

  • Verbatim 320GB FireWire/USB Portable Hard Drive Won't Mount

    Hello ... I have a Verbatim 320GB FireWire/USB Portable Hard Drive that won't mount. The drive has only been used a handful of times ... it is self powered. I accidentally disconnected the drive without dragging it to the trash first .... so I got the "improper disk removal" error. Now the drive won't mount at all. Is it dead or in some kind of frozen state? Any ideas how I can get it back up and running??
    Thanks

    Might try Data Rescue II...
    http://www.prosofteng.com/products/data_rescue.php
    (Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
    Or FileSalvage...
    http://www.subrosasoft.com/OSXSoftware/index.php?%20mainpage=product_info&productsid=1
    to recover what you can.

  • How can i download movies from my portable hard disk or usb to my Ipad2 ?

    how can i download movies from my portable hard disk or usb to my Ipad2 ?

    Import them into iTunes, then sync to your iPad. Movies may need to be converted to an iTunes compatible format. There are any number of utilities for that such as HandBrake 0.9.5.
    Please get the iPad iOS 4 user guide.

  • I would like to use removable hard disk drive (portable hard disk) for iphone because of many data, report and so on. I want to receive data for e-mail, so the iphone holds large amounts of data for a long time, and i want to use its at any time

    nowadays, people use removable hard disk drive (portable hard disk) & usb flash drive at computer because of usability, easy to carry around.
    so, i would like to use these functions for iphone. i want to develop mini portable hard disk for the use of iphone like computer

    Not a feature of iphone.

  • HT201250 i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. do i keep my files in the portable hard disk when I connect it again with the macbook or the time machine will era

    i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
    I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard drive

    Welcome to Apple Support Communities
    Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
    If you want more information about Time Machine, read the Pondini's site > http://pondini.org

  • How to save iPhoto file in a separate portable hard disk drive?

    How to save iPhoto file in a separate portable hard disk drive?

    You want to move the iPhoto Library?
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Portable Hard Disk Drive

    Hi All,
    I am in the market to purchase a Portable Hard Disk Drive, as I had purchased an EZQ drive that is now DOA. I am interested in the LaCie Rugged line, but I was looking for more storage space for a good price. Any suggestions or help would be greatly appreciated.
    Thanks,
    Drew

    I am a huge fan of the Mercury Elite Pro drives from OWC found HERE. They are very reliable due to their use of the Oxford 911 chipset.
    If you are looking for a more portable drive, then take a look at their Mercury On-The-Go drives HERE. They feature the same Oxford chipset and are bus powered, meaning no power adapter is required.

  • Portable Hard disk too slow

    Hi
    I was using protable harddisk to watch movies. Suddenly one day when i connected to mac it became slow. Its **** very slow.
    Its 1 tb. So i really cant format as its collection of movies. So, anyway to recover the slowness of the protable hardisk with some mac software without deleting any files in the Portable hard disk.
    I really appreciate if somebody helps me over this. I really want to save my movies in my protable hard disk.
    Thanks a lot.

    varundev wrote:
    Can anybody have any windows software so that i can copy these files from the corrupted hard disk
    Now you have introduced a new element.  Is this external HDD in a Windows format?  If so, I would try to copy the data to another external HDD on a PC.
    Ciao.

  • USB & Portable Hard Drive problems

    HI!
    two questions....
    1) i have a portable hard drive where i have stored books / photos etc - it shows up on my macbook pro but if i connect up to my old toshiba laptop it does not even register it is there, and i have another portable hard drive which i used on my old laptop which actually shows on the mac but i can only acces the files (pics) to view it does not actaully let me copy or delete anything - why is this and can i get them to read/change on both?
    2) similar to the above portable hard drives i have a flash drive that now wont register on my old laptop, but another usb which i had ebooks on i wanted to transfer them onto the mac.I would have to unzip some files (sometime on the mac and sometimes on the tosh laptop) and then copy over to the mac. this was working fine but i noticed that as i deleted the copied files off the usb to make way for more unzipped files the amount of space wasnt adjusting accordingly. i now find that out of a 16G usb i only have approx 300MB of space left. Yet when i check what is ont he drive there is nothing on it - how can this be?

    It appears that you are trying to use  external drives/USB flash drives that are formatted for a specific operating system with another operating system. For example you have a drive formatted for OSx and you are trying to use it with a Windows computer.
    If you format all your external drives and USB sticks to FAT32 or ExFat then both OSx and Windows will be able to read/write to these drives.
    If you select ExFAT, then use your Windows computer to format the drives/USB drives. There is an issue with drives formatted to ExFat using OSx.
    Make sure you make a back up of your data before you do any formatting. Formatting the drives will remove all the data on them.

  • [SOLVED] usb install of arch can't find internal hard disks

    I installed arch to a 4gb usb flash drive and it works great.  Keeping it bare bones for now without a GUI to force myself to learn more about linux and how it works.  However, I would like to mount and access the internal hard drives of the "host" computer that i'm booting the usb on, and I can't seem to find them.
    ls /dev/disk/by-anything only shows the usb device that arch is installed to and udev and something else I can't remember right now.  Same results when I enter df -h.
    I know that this is possible somehow, because I also have a live usb of Ubuntu 10.10 on another usb stick that can access the internal disks.  However, my ubuntu stick also has a gui, Hal, etc and is a persistent live-disk-to-usb rather than an actual usb stick installation.  Does that affect things?
    I apologize if this is already covered somewhere.  I am a super n00b with arch and I did my best to search both google and the forums.
    Thank you in advance, and I look forward to being a part of the arch community!
    Last edited by williamkray (2010-11-07 22:53:18)

    skunktrader wrote:Perhaps the bios disables the internal disk drive when you boot from USB.  Look through the kernel log to see whether the drives are detected during boot.
    i've looked through the kernel log, and realize that i've never looked at one before and don't really know what i'm looking for.  if i haven't lost your interest yet, here's a pastebin of a recent boot... the PNY is the usb stick that arch is installed to.  http://pastebin.com/D7nzkaaq
    phaedrus wrote:If you do a "cat /proc/partitions" you can see what partitions the kernel is aware of at any time... if your drive is connected and not throwing a tantrum, it should appear in that list. If it's not showing up in the list, check the cables/connections, if it still doesn't show up... panic
    i will do this next.  i'm pretty sure that the cables are connected properly, seeing that i can boot the computers in question without the usb stick and have full access to available drives.
    thank you everyone for all your responses so far!
    EDIT:  alright, i looked at /proc/partitions and this is what it says:
    major minor  #blocks  name
       8        0    3915776 sda
       8        1    3915744 sda1
       3        0   39070080 hda
       3        1    4883728 hda1
       3        2          1 hda2
       3        5     473886 hda5
       3        6   33350877 hda6
    so it looks like my internal drive is recognized somehow.  my new question would be, what exactly is the difference between /proc/partitions and /dev/disk/ ??  and how do i find out more identifying/location information about hda to mount it into an accessible location in my file system?
    Last edited by williamkray (2010-11-07 22:13:29)

  • Install on a new PC after a hard disk failure on original install?

    I lost the hard disk on my desktop, with Adobe X Pro installed (an update).  Purchased a new desktop, and installing my applications.  I can't access the failed hard disk, now only useful as a doorstop.  What are the correct steps to follow to get my license for X Pro up and running on the replacement desktop?  

    Did you get it installed? Do you have the license key? Did you make a backup DVD/CD of Acrobat? We have no clue where you are coming from. Adobe can help you with clearing the activation issue if that is the problem, but you need to have proof of purchase or such. You might see if you can log back in where you downloaded and see if you can get it again. It also helps if you have registered Acrobat.

  • Problem with USB External Hard Disk Drive

    I have similar problem with hard disk MK6025GAS in Sweex casing connected via USB as Raistlfiren in this post but I am not sure if it has something to do with kernel. The problem is that when I plug the hard disk via USB it is not even shown with in /dev/ or by fdisk -l. I had similar problems with the drive before but it was always shown in /dev.
    I got same output from dmesg as Raistlfiren in the post before
    # dmesg | tail
    sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
    sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
    Info fld=0x0
    I was browsing net for a lot of time to find a solution but nothing helped a lot. The problem is closes to the one described on Gentoo Forum
    I can see that it is recognized by computer since it is shown with lsusb
    # lsusb
    Bus 001 Device 005: ID 13fd:0540 Initio Corporation
    # lsusb -d 13fd:0540 -v
    Bus 001 Device 005: ID 13fd:0540 Initio Corporation
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    idVendor 0x13fd Initio Corporation
    idProduct 0x0540
    bcdDevice 0.00
    iManufacturer 1 Initio
    iProduct 2 MK6025GAS
    iSerial 3 0010100500000000
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 32
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xc0
    Self Powered
    MaxPower 2mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 2
    bInterfaceClass 8 Mass Storage
    bInterfaceSubClass 6 SCSI
    bInterfaceProtocol 80 Bulk (Zip)
    iInterface 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x81 EP 1 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x02 EP 2 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 1
    Device Qualifier (for other device speed):
    bLength 10
    bDescriptorType 6
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    bNumConfigurations 1
    Device Status: 0x0001
    Self Powered
    From the beginning I though and I still think that the partition table is screwed up but the programs like TestDisk and fixdisktable work only with disks shown in /dev/
    Additionally, I have checked the content of /var/log/kernel.log
    Sep 16 22:03:58 hramat kernel: usb 1-2: new high speed USB device using ehci_hcd and address 5
    Sep 16 22:03:58 hramat kernel: usb 1-2: configuration #1 chosen from 1 choice
    Sep 16 22:03:58 hramat kernel: scsi4 : SCSI emulation for USB Mass Storage devices
    Sep 16 22:03:58 hramat kernel: usb-storage: device found at 5
    Sep 16 22:03:58 hramat kernel: usb-storage: waiting for device to settle before scanning
    Sep 16 22:04:03 hramat kernel: scsi 4:0:0:0: Direct-Access Initio MK6025GAS 2.23 PQ: 0 ANSI: 0
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: Attached scsi generic sg4 type 0
    Sep 16 22:04:03 hramat kernel: usb-storage: device scan complete
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Write Protect is off
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Mode Sense: 86 0b 00 02
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
    Sep 16 22:04:03 hramat kernel: sdd:<6>sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
    Sep 16 22:04:03 hramat kernel: Info fld=0x0
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] ASC=0x0 ASCQ=0x0
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Sense Key : 0x0 [current]
    and /var/log/errors.log
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
    Sep 16 22:04:03 hramat kernel: sd 4:0:0:0: [sdd] Assuming drive cache: write through
    Sep 16 22:07:35 hramat kernel: INFO: task async/0:3957 blocked for more than 120 seconds.
    Sep 16 22:07:35 hramat kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    The only thing I understand from these logs is that the disk is blocked, therefore not listed in /dev.
    Assuming the newer kernel problems I could try to use some older live linux CD to see if that would work. I am also thinking of connecting this hard drive directly to my laptop, using live linux CD and maybe check the output of hdparm. Is there anything else I could check or try?
    Thank you for any help or suggestions
    Matej

    Thank you nTia89 for response. Sorry for not providing enough information.
    I believe the problem is not system dependent. I have dual boot with windows and there the disk has also problems. However, I do have Arch32 with Kernel 2.6.30, using Gnome. hal and dbus are also running.
    I did not tried to connect the disk to the computer directly, I will try it today.
    Yesterday I have used SystemRescueCD 0.4.1 with Kernel 2.6.22. I wanted to see if it will be recognized by the system and placed in /dev/. Yes it was. This means that the problem highlighted in Gentoo forum can be true, but it doesn't solve my problem. I have tried to connect the drive several times to Arch and it was not shown in /dev/sd*, in SystemRescueCD it was placed as /dev/sdb. Now I am sure that the partition table is screwed up.
    So I have started to play with the drive in SystemRescueCD with TestDisk and FixDiskTable but without success.
    % fdisk -l
    Disk /dev/sda: 100.0 GB, 100030242816 bytes
    255 heads, 63 sectors/track, 12161 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 1530 12289693+ 7 HPFS/NTFS
    /dev/sda2 1531 6672 41303115 7 HPFS/NTFS
    /dev/sda3 6673 12161 44090392+ f W95 Ext'd (LBA)
    /dev/sda5 * 6673 11908 42058138+ 83 Linux
    /dev/sda6 11909 12161 2032191 82 Linux swap / Solaris
    Disk /dev/sdb: 60.0 GB, 60011642880 bytes
    64 heads, 32 sectors/track, 57231 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
    Disk /dev/sdb doesn't contain a valid partition table
    Manufacturer disk geometry: Heads: 16; Cylinders: 16383; Sectors: 63; Logical Blocks (LBA): 117210240
    TestDisk found only Linux partitions with 43Gb while disk had only one 60Gb partitioned with FAT32/NTFS.
    Also recognized 64 heads, 57231 cylinders and 32 sectors (same as from fdisk -l), which obviously differs from manufacturer disk geometry.
    testdisk.log:
    Thu Sep 17 19:09:26 2009
    Command line: TestDisk
    TestDisk 6.8, Data Recovery Utility, August 2007
    Christophe GRENIER
    Linux version (ext2fs lib: 1.40.2, ntfs lib: 9:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: none)
    Using locale 'C'.
    Hard disk list
    Disk /dev/sda - 100 GB / 93 GiB - CHS 12161 255 63, sector size=512
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32, sector size=512
    Disk /dev/sdb - 60 GB / 55 GiB
    Partition table type: Intel
    Interface Advanced
    New options :
    Dump : No
    Cylinder boundary : Yes
    Allow partial last cylinder : No
    Expert mode : No
    Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57231 64 32
    Current partition structure:
    Partition sector doesn't have the endmark 0xAA55
    Ask the user for vista mode
    Computes LBA from CHS for Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Allow partial last cylinder : Yes
    search_vista_part: 1
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Search for partition aborted
    Results
    interface_write()
    No partition found or selected for recovery
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Search for partition aborted
    Results
    interface_write()
    No partition found or selected for recovery
    simulate write!
    write_mbr_i386: starting...
    Store new MBR code
    write_all_log_i386: starting...
    No extended partition
    Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Current partition structure:
    Partition sector doesn't have the endmark 0xAA55
    Ask the user for vista mode
    Allow partial last cylinder : Yes
    search_vista_part: 1
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Results
    interface_write()
    No partition found or selected for recovery
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    NTFS at 8956/63/32
    heads/cylinder 255 (NTFS) != 64 (HD)
    sect/track 63 (NTFS) != 32 (HD)
    filesystem size 24579387
    sectors_per_cluster 8
    mft_lcn 1024141
    mftmirr_lcn 1650676
    clusters_per_mft_record -10
    clusters_per_index_record 1
    NTFS part_offset=9392094720, part_size=12584646144, sector_size=512
    NTFS partition cannot be added (part_offset<part_size).
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34129 1 1 75201 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=69896224, size=84116272, end=154012495, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34632 2 1 75704 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=70926400, size=84116272, end=155042671, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34668 0 1 75740 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=71000064, size=84116272, end=155116335, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34673 1 1 75745 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=71010336, size=84116272, end=155126607, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34699 2 1 75771 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=71063616, size=84116272, end=155179887, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 34708 2 1 75780 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=71082048, size=84116272, end=155198319, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 36338 0 1 77410 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=74420224, size=84116272, end=158536495, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 36367 0 1 77439 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=74479616, size=84116272, end=158595887, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 36401 2 1 77473 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=74549312, size=84116272, end=158665583, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 36414 2 1 77486 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=74575936, size=84116272, end=158692207, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 37949 1 1 79021 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=77719584, size=84116272, end=161835855, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 37955 1 1 79027 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=77731872, size=84116272, end=161848143, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 37989 1 1 79061 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=77801504, size=84116272, end=161917775, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 38404 0 1 79476 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=78651392, size=84116272, end=162767663, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 39636 2 1 80708 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=81174592, size=84116272, end=165290863, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 41263 1 1 82335 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=84506656, size=84116272, end=168622927, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 41266 1 1 82338 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=84512800, size=84116272, end=168629071, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 41660 0 1 82732 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=85319680, size=84116272, end=169435951, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 42898 0 1 83970 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=87855104, size=84116272, end=171971375, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 43244 1 1 84316 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=88563744, size=84116272, end=172680015, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 44870 2 1 85942 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=91893824, size=84116272, end=176010095, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 44930 2 1 86002 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=92016704, size=84116272, end=176132975, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 46961 0 1 88033 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=96176128, size=84116272, end=180292399, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 47312 0 1 88384 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=96894976, size=84116272, end=181011247, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 48393 2 1 89465 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=99108928, size=84116272, end=183225199, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 49633 2 1 90705 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=101648448, size=84116272, end=185764719, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 50767 1 1 91839 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=103970848, size=84116272, end=188087119, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 51150 1 1 92222 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=104755232, size=84116272, end=188871503, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 51941 1 1 93013 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=106375200, size=84116272, end=190491471, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 52759 0 1 93831 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=108050432, size=84116272, end=192166703, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 53069 1 1 94141 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=108685344, size=84116272, end=192801615, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 53768 0 1 94840 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=110116864, size=84116272, end=194233135, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54287 0 1 95359 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=111179776, size=84116272, end=195296047, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54493 2 1 95565 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=111601728, size=84116272, end=195717999, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54861 1 1 95933 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=112355360, size=84116272, end=196471631, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54890 2 1 95962 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=112414784, size=84116272, end=196531055, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 54953 2 1 96025 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=112543808, size=84116272, end=196660079, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 56330 1 1 97402 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=115363872, size=84116272, end=199480143, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 56334 0 1 97406 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=115372032, size=84116272, end=199488303, disk end=117211136)
    recover_EXT2: s_block_group_nr=0/320, s_mnt_count=31/34, s_blocks_per_group=32768
    recover_EXT2: boot_sector=0, s_blocksize=4096
    recover_EXT2: s_blocks_count 10514534
    recover_EXT2: part_size 84116272
    D Linux 57203 0 1 98275 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    This partition ends after the disk limits. (start=117151744, size=84116272, end=201268015, disk end=117211136)
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Check the harddisk size: HD jumpers settings, BIOS detection...
    The harddisk (60 GB / 55 GiB) seems too small! (< 103 GB / 95 GiB)
    The following partitions can't be recovered:
    D Linux 34129 1 1 75201 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34632 2 1 75704 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34668 0 1 75740 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34673 1 1 75745 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34699 2 1 75771 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 34708 2 1 75780 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 36338 0 1 77410 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 36367 0 1 77439 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 36401 2 1 77473 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 36414 2 1 77486 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 37949 1 1 79021 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 37955 1 1 79027 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 37989 1 1 79061 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 38404 0 1 79476 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 39636 2 1 80708 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 41263 1 1 82335 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 41266 1 1 82338 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 41660 0 1 82732 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 42898 0 1 83970 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 43244 1 1 84316 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 44870 2 1 85942 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 44930 2 1 86002 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 46961 0 1 88033 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 47312 0 1 88384 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 48393 2 1 89465 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 49633 2 1 90705 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 50767 1 1 91839 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 51150 1 1 92222 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 51941 1 1 93013 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 52759 0 1 93831 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 53069 1 1 94141 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 53768 0 1 94840 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54287 0 1 95359 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54493 2 1 95565 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54861 1 1 95933 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54890 2 1 95962 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 54953 2 1 96025 27 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 56330 1 1 97402 26 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 56334 0 1 97406 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    D Linux 57203 0 1 98275 25 16 84116272
    EXT3 Large file Sparse superblock Recover, 43 GB / 40 GiB
    Results
    interface_write()
    No partition found or selected for recovery
    simulate write!
    write_mbr_i386: starting...
    Store new MBR code
    write_all_log_i386: starting...
    No extended partition
    Interface Advanced
    Disk /dev/sdb - 60 GB / 55 GiB
    Partition table type: Intel
    Disk /dev/sdb - 60 GB / 55 GiB
    Partition table type: Intel
    New options :
    Dump : No
    Cylinder boundary : Yes
    Allow partial last cylinder : No
    Expert mode : No
    New options :
    Dump : No
    Cylinder boundary : Yes
    Allow partial last cylinder : No
    Expert mode : No
    Analyse Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Current partition structure:
    Partition sector doesn't have the endmark 0xAA55
    Ask the user for vista mode
    Allow partial last cylinder : No
    search_vista_part: 0
    search_part()
    Disk /dev/sdb - 60 GB / 55 GiB - CHS 57232 64 32
    Search for partition aborted
    Results
    Can't open backup.log file: No such file or directory
    interface_load
    interface_write()
    No partition found or selected for recovery
    simulate write!
    write_mbr_i386: starting...
    Store new MBR code
    write_all_log_i386: starting...
    No extended partition
    TestDisk exited normally.
    fixdisktable first output:
    % ./fixdisktable -d /dev/sdb
    Getting hard disk geometry
    cylinders=57231, heads=64, sectors=32
    end_offset: 2147482624
    FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
    EXT2 partition at offset 56832, length=(41072.398 MB) 43067531264
    Sectors: start= 111, end= 84116382, length= 84116272
    Hd,Sec,Cyl: start(3,16,0) end(28,31,41072)
    Done searching for partitions.
    Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
    1 80 3 16 0 63 32 1023 111 84116273 83 (Interpretted)
    1 80 3 16 0 63 224 255 111 84116273 83 (RAW)
    1: 8003 1000 833f e0ff 6f00 0000 3183 0305
    2: 0000 0000 0000 0000 0000 0000 0000 0000
    3: 0000 0000 0000 0000 0000 0000 0000 0000
    4: 0000 0000 0000 0000 0000 0000 0000 0000
    Do you wish to write this partition table to disk (yes/no)? no
    fixdisktable second output:
    % ./fixdisktable -d -r -v /dev/sdb
    Getting hard disk geometry
    cylinders=57231, heads=64, sectors=32
    end_offset: 2147482624
    FfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSsNnBbUuFfEeSs
    NTFS partition at offset 17483776, length=(17592186043512.582 MB) 184467440727622 49216
    Sectors: start= 34148, end=36028797017147916, length=36028797017113768
    Hd,Sec,Cyl: start(43,5,16) end(16,12,2096265)
    Done searching for partitions.
    Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID
    1 80 43 5 16 63 32 1023 34148 -1850199 07 (Interpretted)
    1 80 43 5 16 63 224 255 34148 -1850199 07 (RAW)
    1: 802b 0510 073f e0ff 6485 0000 a9c4 e3ff
    2: 0000 0000 0000 0000 0000 0000 0000 0000
    3: 0000 0000 0000 0000 0000 0000 0000 0000
    4: 0000 0000 0000 0000 0000 0000 0000 0000
    Do you wish to write this partition table to disk (yes/no)? no
    This string "FfEeSsNnBbUu" was repeating there for longer time and it was most probably related to debugging or a verbose mode of fixdisktable
    As I have mentioned I will try to connect the disk directly to the computer and see what will happen.
    Shall I try to correct the disk geometry to the one specified by manufacturer? Is it possible?
    Any suggestions?

  • Can I install and use any 2.5" SATA hard disk on my Mac Mini (Late 2012)?

    I have a Mac Mini (Late 2012) which is currently housing a 500GB SATA hard disk. Unfortunately read errors have been detected and it seems to be slowing down. I want to replace this with another 500GB SATA hard disk and I was wondering whether any notebook (2.5") hard disk would work or whether I have to look for one with specific specs (such as RPM, SATA version, etc).
    Any help would be greatly appreciated.

    Any 2 1/2 inch STA HD will work as long as the height is 9.5 mm or less. All most all meet this requirement except very larger capacity ones
    I would opt for a SSD since those are a lot faster than a 2 1/2 HD and now they are very reasonably priced.
    You can consider installing a second disk to using:
    http://eshop.macsales.com/item/OWC/DIYIMM11D2/

Maybe you are looking for

  • Synch problems after upgrade from Office 2010 Beta

    I updated from the beta version of Office 2010 to the pro version. Now I can not synch my calendar. I get the message "no supported calendar application can be found" on the info page of my device in Itunes (seems it can not find Outlook 2010), even

  • Is Apple TV going to get Amazon Prime?

    Is Apple TV going to get Amazon Prime?

  • KM Reporting

    Hi, I had a few reporting needs from the client on the documents uploaded in the CM repository. Is it possible to find how many times a user has accessed a folder or a document? When did the user last access the folder/document? I know that the resou

  • Reports 9i BUGGY?

    I've installed Reports 9i (9.0.2.0.1) on Windows XP Professional on a Dell Dimension 8200. I've encountered a number of bugs. For example, in Query Builder tring to set the sort order causes Reports to crash every time. I also crashed while trying to

  • Flash Player won't install (trying to install the most recent version)

    I tried to install flash the most recent version but it just disappears from the area where i downloaded it and have to end the process. Or I will get incorrect certificate error and nothing happens won't install. I had to revert to prevous version I