Install 11gR2 on Rehat5 64bit

Hi,
I try to install 11gR2 on Redhat5 64 bite.
So I create a new vmware session in my server
I install Redhat5 64bit I add thes packages for Oracle
I create ORACLE user I download the files from OTN.
When I run the "runInstaller" I get the first screen "Configuration Security Update" when I click on Next butom the screen hangs...and Idon't have any message!!.
Can you help please?

Pl confirm that are following all of the steps in the Install Guide - http://download.oracle.com/docs/cd/E11882_01/install.112/e24321/toc.htm
Pl post the last 100 lines from the install log - http://download.oracle.com/docs/cd/E11882_01/install.112/e24321/app_ts.htm
HTH
Srini

Similar Messages

Install Windows 8.1 64bit on a Macbook Pro Late 2008 (using bootcamp 4.0.4033)

Hi everyone, I just tried to install windows 8.1 64bit (x64) on my MacBook Pro 15'' Late 2008 (Core 2 Duo 2.4Ghz - 4GB RAM - Nvidia 9600M GT 512Mo), running Mavericks (10.9.5), and successed it with bootcamp 4.0.4033.
I installed it from scratch (new partition, no update from windows 7), in less than 1h following these very simple steps :
Step "0" :
- You'll need an two-button usb mouse plugged
- Make sure your 64bit kernel is activated by typing this line of command in the terminal :
sudo systemsetup -setkernelbootarchitecture x86_64
If you need to cancel it, simply type this :
sudo systemsetup -setkernelbootarchitecture i386
I don't really know if this activation is necessary, but I did it 6 months ago for After Effects and maybe this activation has an effect on what happens next.
Step 1 : download the contents of bootcamp 4.0.4033 on a USB key, downloadable here : Boot Camp Support Software 4.0.4033
After the download, you'll need to unzip this file in your usb key.
NB : This bootcamp only works from XP to windows 7, but it will be enough for your old-timer laptop.
Step 2 : Create a new NTFS partition on your HDD (using the disk utility)
Windows 8.1 64 bit needs at least 20GB, so I recommend a 100GB partition as a minimum for a correct running OS (the "15%" rule).
NB : Windows 8.1 will run over a NTFS partition and nothing else.
Step 3 : Insert your bootable windows 64bit 8.1 (CD or USB key).
Step 4 : Reboot your laptop, and keep pressed the Alt key just after the boot bell sound.
The OS selection screen loads. Once appeared, you can release the Alt key.
Step 5 : If your bootable device is working, the OS selection screen will display a "Windows 8.1" HDD or CD icon. Click on it and presse "enter".
Maybe you'll see a "UFI Windows" or "UFI Boot" or "UFI something...", this doesn't work.
After pressing "enter", the windows 8.1 installation process will start.
Step 6 : During the installation process, you'll have to chose the destination partition for your OS.
Select the partition you've created earlier (step 2)
Following the windows 8.1 steps are very simple.
NB : Don't forget to press the Alt key when windows 8.1 tries to restart!
Step 7 : Eject your windows 8.1 CD/usb key, then reboot holding Alt key, and select your freshly installed windows OS in the selection screen
Step 8 : After windows 8.1 is loaded, insert your usb key with Bootcamp 4.0.4033, open the "bootcamp" folder, right-click on the bootcamp setup, and click on "properties".
Select the "compatibility" tab
Check the box "run this program in compatibility mode for"
In the list below this box, select "Windows 7"
Click "Apply" then "Ok"
Now launch this boot camp setup (press "enter" or double-click)
Step 9 : Complete the BootCamp installation process, then restart (like step 7)
Don't forget to hold the Alt key after the bell sound
Step 10 : Enjoy your freshly installed windows 8.1!
You can acces your bootcamp parameters from the task bar (click on the tiny booycamp icon to open the quick menu and then click on the parameters/configurater). Here you can set your keyboard preference, your trackpad preference (multi-touch works), etc.
Following this procedure, I can use the built-in Apple-maped keyboard of my MBP. Every function keys works (Volume, luminosity, etc.)
Coming from Windows XPSP3, I was very surprised by the speed of the windows 8.1 installation (using an external USB super drive), and more surprised by this OS running flawlessly on my undying MBP!
The only issue I have is that my ethernet port isn't recognized, but it's a minor problem and i'm gonna found it quickly. I think it's due to my installation which wasn't perfectly clean (I try to run manually bootcamp 5.0.1 first, so there is some crap drivers somewhere).
So in order to confirm this procedure, i'm gonna re-install windows 8.1 from scratch very soon, because it take less time to do it (from step 1 to step 10) than write this article!
Message was edited by: Lud@l

And I used this method:
1. Install Windows 8.1
2. Download BootCamp 5 and unzip to folder BootCamp5 of a USB drive
3. Start CMD as Administrator
4. Install BootCamp 5 by entering the following commands
D: (Assuming the USB drive is assigned to letter D
CD BootCamp5\BootCamp\Drivers\Apple
BootCamp.msi
No need for InstEd might be considered by some as even more elegant as bezodziu's method

Java.lang error while installing 11gR2 Grid Infrastructure on HPUX 11.31

Hi,
I am installing 11gR2 Grid Infrastructure on HPUX 11.31 Itanium server for installing RAC database.
I do not get any error during the installation of the software but while running the root.sh I am getting following error..
# /opt/oracle/app/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /opt/oracle/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-04-23 15:09:28: Parsing the host name
2010-04-23 15:09:28: Checking for super user privileges
2010-04-23 15:09:28: User has super user privileges
Using configuration parameter file: /opt/oracle/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
stty: : Not a typewriter
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'bmblade-91'
CRS-2672: Attempting to start 'ora.mdnsd' on 'bmblade-91'
CRS-2676: Start of 'ora.gipcd' on 'bmblade-91' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'bmblade-91' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'bmblade-91'
CRS-2676: Start of 'ora.gpnpd' on 'bmblade-91' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'bmblade-91'
CRS-2676: Start of 'ora.cssdmonitor' on 'bmblade-91' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'bmblade-91'
CRS-2672: Attempting to start 'ora.diskmon' on 'bmblade-91'
CRS-2676: Start of 'ora.diskmon' on 'bmblade-91' succeeded
CRS-2676: Start of 'ora.cssd' on 'bmblade-91' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'bmblade-91'
CRS-2676: Start of 'ora.ctssd' on 'bmblade-91' succeeded
Error occurred during initialization of VM
java.lang.Error: Permission denied
sh: 10154 Abort
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2500: Cannot stop resource 'ora.asm' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-2673: Attempting to stop 'ora.ctssd' on 'bmblade-91'
CRS-2677: Stop of 'ora.ctssd' on 'bmblade-91' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'bmblade-91'
CRS-2677: Stop of 'ora.cssdmonitor' on 'bmblade-91' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'bmblade-91'
CRS-2677: Stop of 'ora.cssd' on 'bmblade-91' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'bmblade-91'
CRS-2677: Stop of 'ora.gpnpd' on 'bmblade-91' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'bmblade-91'
CRS-2677: Stop of 'ora.gipcd' on 'bmblade-91' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'bmblade-91'
CRS-2677: Stop of 'ora.mdnsd' on 'bmblade-91' succeeded
Initial cluster configuration failed.
Do anybody came accross this issue? I had 11gR2 Grid Infrastructure installed on this server, but for demostration to other team members, I removed the earlier installation using Metalink Note :942166.1. I will appreciate your input.
Regards
Shailandra

Hi,
One of the recommended solution for this issue by Oracle.
Have the DISPLAY variable set when running root.sh. This is the th recommendation by oracle to a SR opened by another vendor for this issue.
Regards

Some issues after clean installing windows 7 pro 64bit

Hi,
I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine. What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
Can anyone help me? Never had to deal with these issues.
Thanks in advance
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

Hello,
Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI? If so, did that work?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

HP C309 G AIO can't install in Windows 7 64bit running under BootCamp

HP C309 G Printer wont install in Windows 7 64bit running under BootCamp on a new iMac
Just bought a new iMac. Installed HP C309 all in one without incident on the Mac side. I am also running Windows 7 on iMac through a program called Bootcamp. When I boot to Windows 7 and try to install the newly downloaded software for windows 7 from the HP site, it begins to load then stops, giving me two error messages. They are both essentially the same except one says software and the other says hardware. The software one says: This computer does not have the necessary USB software support to allow completion of a USB installation. The printer plugs directly into the monitor in one of four usb ports. All the usb ports work on the system when using Windows 7. I have other devices working and plugged into the usb ports while in Windows 7. It is almost like the printer software is unable to find the usb software or hardware. Any ideas

Well, you have a full Window's 7 install so you would really have to go to HP and/or Microsoft to see what is going on. Bootcamp basically is only involved with "booting" and just installs Apple product drivers and such. Just treat the Window's side as if you are using it on a "normal" Window's PC. (As far as problems, crash's, updates, or any other Windows, HP, etc, problems you may have.)
"Installed HP C309 all in one without incident on the Mac side."
So,,, that means the printer "works" (prints) on the Mac or the installer just worked? Make sure the Printer actually prints in the Mac side as you may have a dead USB port on the Printer. It happens.
If your HP works fine (prints) in the Apple environment you know it's not the USB ports on either the printer or the computer.
You said you already downloaded the newer versions, have you tried using the drivers on the install disk and then update them to the newer ones? Also if you haven't yet, make sure the drivers are for the 64bit version, just a thought.
That's about all my brain cells have so good luck.......

Bootcamp 2.1 won't install on Windows 7 64bit

I downloaded the 64bit Bootcamp and tried to install on Windows 7 64bit Retail Edition (RTM) and Bootcamp won't run. I tried compatability mode for Windows Vista 64 bit with and without SP2.
I need sound drivers. Everything else works on my Mac.
HELP

Install RealTek drivers for sound.
Maybe the 2.0.x Boot Camp drivers didn't get installed. You have to have those first.
Also.... 2.1 is OLD as the hills and was only for SP3 really, nothing there to improve on W7 or Vista SP1/2.

Update KB2685811 fails to install on Windows 7 64bit

Update KB2685811 fails to install on Windows 7 64bit FROM WINDOWS 8.1

Hi,
Based on my research, this update package only applies to Windows 7 and Windows server 2008 R2. Windows 8.1 doesn't support this update.
If you need any further assistance, please feel free let us know.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Unable to install windows 8 Pro (64bit) on R61, 7755jm1

I have an old thinkpad, the R61 series, model 7755JM1.
And I tried to install windows 8 pro (64bit) on it, hoping to have a taste of the new OS's touch features through remote control on my tablet.
However, the installation has never been successful.
I was able to finish the installation process. Yet whenever it starts to "setup my device", it was never able to finish, and it usually stopped at 65% or 84%.
then my thinkpad would restart on its own, and threw an error message telling me my computer is restarted unexpectedly and the installation is not succeful, also suggesting me try to install again.
This is very frustrating. I have checked on intel's website and other online sites that my CPU (core 2 dual process T8100) supports intel64, and execute disable bit (in my BIOS I think it is by name of "execution prevention"), and sse2, sse3.
In my BIOS, I enabled execution prevention, set SATA mode to "AHCI", and enabled "extended memory test". I format the partition every time I tried to install.
I have installed windows 7 pro on my thinkpad before, and it was just fine.
Do anybody have any idea what is going and how should I solve this?
Many thanks.
Lee.

Hello,
According to the Lenovo, the specs for your R61 (MT: 7755-JM1) as it shipped are as follows:
T8100(2.1GHz), 1GB RAM, 160GB 5400rpm HD, 14.1in 1400x900 , 128MB nVIDIA Quadro NVS 140M, CDRW/DVDRW, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ether, UltraNav, Sec Chip, FPR, Camera, 4c Li-Ion, WinVista Home Basic 32.
As you pointed out, the T8100 is a 64-bit CPU, so there should be no problems with that. I did notice that the unit originally shipped with 1GB of RAM, though.
From looking at Microsoft's Windows 8 System Requirements page, I see that 2GB of RAM are required for the 64-bit edition of Microsoft Windows 8, so if your R61 only has the original 1GB of RAM in it, it will need to be upgraded..
The R61 officially supports 4GB of RAM in the form of two 1GB PC2-6400 800MHz DDR SO-DIMM modules, and apparently can unofficially be upgraded to 8GB using two 4GB modules with the same characteristics.
If you already have 2GB (or more) of RAM installed, the other suggestion off the top of my head is to make sure you have the latest version of the BIOS firmware installed:
Name: BIOS Update Bootable CD for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP, 2000 - ThinkPad R61, R61i 14.1 inch widescreen with IEEE 1394, ThinkPad T61, T61p
URL: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013943
Version: 2.30-1.08
Released: 02 Apr 2012
If the issue still occurs, please let us know and we can try and help you troubleshoot it further.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Installing 11gr2 in Oracle Linux 6.3 (./runInstaller - permission denied)

Whenever i try to run ./runInstaller in terminal,
i get the error as Permission denied ,
While installing oracle linux 6.3 , i have given root password and in terminal ,
even though being a root user, can't install the Oracle Database 11gr2.
I know, there are many tutorials about installing 11gr2, i followed almost all from different sites, but stuck with Permission denied.
Pls help me anyone, as am a beginner in the field of Linux environment.
Thanks...
Edited by: flixblixclix on Jan 1, 2013 10:51 PM

979352 wrote:
Whenever i try to run ./runInstaller in terminal,
i get the error as Permission denied ,
While installing oracle linux 6.3 , i have given root password and in terminal , trying to install as root is a clear indication that you either haven't read the Installation Guide, or you are choosing to ignore it. If you missed or chose to ignore the point that the installation should not be done as root, who knows what else you missed or chose to ignore.
From Oracle® Database Installation Guide
11g Release 2 (11.2) for Linux ( http://docs.oracle.com/cd/E11882_01/install.112/e24321/inst_task.htm#BABJGGJH)
4.5.1 Running Oracle Universal Installer
For any type of installation process, start Oracle Universal Installer and install the software, as follows:
Logon as the Oracle software owner user (typically, oracle) to the computer on which you want to install Oracle components.
even though being a root user, can't install the Oracle Database 11gr2.
I know, there are many tutorials about installing 11gr2, i followed almost all from different sites, but stuck with Permission denied.
Pls help me anyone, as am a beginner in the field of Linux environment. Read the Installation Guide. Read all of it. Believe it.
>
Thanks...Edited by: EdStevens on Jan 1, 2013 8:24 AM

Can't re-install iTunes on Windows7 64bit PC.

Can't re-install iTunes on Windows7 64bit PC. Tried uninstalling Apple programs in correct order and starting again with new download but I can't install Apple App support which means iTunes won't work. May be something to do with microsoft visual c++ redistributable package x86 which I cannot repair.
Help please!
Thanks
Mike

A hint from another thread suggests that temporarily disabling the Windows Firewall may help with the installation of the C++ Redistributable components.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Installing 11gr2 release 11.2.0.2 database in Windows 7 32 bit

Hi everyone,
I want to Install 11gr2 release 11.2.0.2 database in Windows 7 32 bit.
I have searched on download.oracle.com but i was not able to findout proper database compatible with windows 7. They had 11gEX db but i want to install simple 11gr2.
Please help me to download and configure database on windows 7 32 bit.
Thanks in advance.
Nish

11.2.0.2 is only available from My Oracle Support (https://support.oracle.com), access to which requires a paid support contract with Oracle
11.2.0.1 can be downloaded from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Install Guide is at http://docs.oracle.com/cd/E11882_01/install.112/e24186/toc.htm - you will need Win 7 Professional or higher - Home version is not supported.
HTH
Srini

Linux: error in invoking 'ntcontab.o' of makefile while installing 11gr2

Hey all,
I installed Oracle Linux 6.1 under VirtualBox (hosted on a Windows 7 box).
All is well and I began to install Oracle 11g for Linux, but ran into this error:
Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile '/home/Roy/app/oracle/product/11.2.0/dbhome_1/network/lib/ins_net_client.mk'. while installing 11gr2 client on Linux x86-64 bit serverWhen I dug into the logs, the error was this:
INFO: mv: cannot stat 'ntcontab.o'
INFO: : No such file or directoryCan anyone provide a link to resolution?
Thanks

You are using an unsupported OS - pl try with a supported OS version.
http://download.oracle.com/docs/cd/E11882_01/install.112/e24321/pre_install.htm#CIHFICFD
HTH
Srini

Can't install itunes on my 64bit windows 7 laptop

Can't install itunes on my 64bit windows 7 laptop. Says there was a problem with the windows installer package and a program required for this install to complete could not be run..
I have uninstalled and re-installed several times now already using the add/ remove programs under control panel..

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

My iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

my iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

It won't pass 10.3.
What does this mean?
I figured it out. Thanks!!!
What did you figure out? How about posting how you resolved it?

I just recently installed windows 7 enterprise 64bit on my dv3-2080eo.

I just recently installed windows 7 enterprise 64bit on my dv3-2080eo. Everything is brilliant except for the fingerprint reader which does not work. It shows up in device manager as being installed correctly, but digital persona and windows say its not connected. I've tried a few reinstalls of software and drivers but to no avail. And when I look for software, the results are pretty sparse. HP tries to convince me that im using a beta software and support will show up soon, but this is not a beta copy of anything. Has anyone done what ive done and sorted it out?
the reader model is vfs301
Thanks all.

Try my solution at http://forum.notebookreview.com/showpost.php?p=6007580&postcount=838

Install 11gR2 on Rehat5 64bit

Similar Messages

Maybe you are looking for