Install 2 OraMTS on the same DB ?

Hi,
I have installed an Oracle Service for MTS on my Internet Web Server in my company.
Everything work well with my application.
My problem is that if I try to install another Oracle Service for MTS on my developement computer, targetting the same database, this service shut down each 5 seconds. That means that I cannot continue to developp my application on my computer.
Is it possible to install 2 OraMTS on different computer targetting the same DB ? If not, how can I use the one of my web server from my dev computer ?
Thanks for your help
Yves

Vivek,
Thanks for this indication : just one OraMTS is needed. T
he problem now is that I get a "New transaction cannot enlist in the specified transaction coordinator" if I call a COM+ component that REQUIRED transaction. If I change its Transaction properties to DISABLED it's work.
I have traced the OraMTS after a new start :
160501729: [2216] Main Listener Thread - Start.
160501729: [2216] Main Listener Thread - Success: Listener started (20, 2, PSPIPE1718, SVRWEB0).
160501729: [2216] OracleMTSService - Accepting new enlistment requests.
It seems OK.
If I call my Web application on SVRWEB0 (where the OraMts is installed) everything is OK. If I call the same site on my development computer, the com+ component with transaction required give me this "new transaction..." error.
I'm sure you have a good explanation to provide to me.
Thanks in advance
null

Similar Messages

I need to uninstall downloaded version of Elements 12 on a computer, then install Elements 12 on the same computer directly from a disk. Elements 11 was previously used on same computer, and the albums and library had been moved to the first installation

I need to uninstall downloaded version of Elements 12 on a computer, then install Elements 12 on the same computer directly from a disk. Elements 11 was previously used on same computer, and the albums and library had been moved to the first installation of 12, which I am removing. How do I correctly unstall the old Elements 12, and install the new elements 12 from disk, and retain all albums and libraries from the old Elements 12?

You're welcome. It was not an answer, it was a question, and it could lead to being helpful if you explain why you think you need to uninstall.
As far as uninstalling goes, you will uninstall it like you do for any program, which depends on what kind of operating system you have. If you wish to retain albums and whatnot, maybe the following link can provide some guidance.
Photoshop Elements Help / Use Backup, Restore to move catalog | Organizer | Elements 6 or later
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html#ma in_Special_notes_if_you_restore_a_catalog_from_a_previous_version_of_Photoshop_Elements

How to install forms 6i on the same machine oracle8i installed

I have oracle8.1.6 release 2 installed on microsocft windows 98. How do I installed forms 6i on the same machine. when I installed forms6i, it has overwritten the resgistry settings and I cannot run database any more. Please give me some ideas how to install all these on the same machine on windows 98 , operating system DOS.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Simon Jennings ([email protected]):
You need to use seperate Oracle homes.<HR></BLOCKQUOTE>
You have to install Forms6i on a different Oracle_Home not Default_Home, which I believe is where you installed Oracle8i.

Firefox will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

Can you attach a screenshot or link to the instructions you are following?
You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

I cant install itunes it says msvcr80 is missing and I keep trying to re install but it said the same thing

what do i do im really confused I keep trying to install but it does the same thing

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99905)

I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

Adobe admits to a Flash problem here:
http://forums.adobe.com/message/6285851#6285851
YOu can apply the fix they show and tehn wait for them to fix the problem

Installing multiple copies of the SAME service on a BOX

This is a "Best Practice" question for BOE-XI (3.x).
I have dug through the 3.1 DEPLOYMENT training, Admin and Pattern documents, but none of them clearly discuss anything around installing multiple copies of the SAME service (eg. CMS, ReportJob) on the same physical server if it has more that 1 CPU.
The documents detail the "per CPU" limits of a service, but don't detail if we should install multiple services to take advantage of the multiple CPUs available on a specific Physical Server.
For example - the Crystal Report Job Server can support five (5) simultaneous report jobs per CPU by default.
If we have a 2 CPU machine, do we run one (1) CRJS service - but increase the "Maximum Jobs Allowed" setting to Ten (10), or do we install two (2) CRJS services each with a default limit of Five (5)...?
Does this rule apply to all services including the One (1) CPU for One-Hundred (100) simultaneous requests sizing-limit on the CMS..? That doesn't appear to be a setting we can control within the CMC.
Can you run more than one CMS service on a specific Physical Server...?
Thanks in advance for the advice.

I personally have run 20 jobs per Crystal Job server and most were dual processor dual core. I had over 1000 jobs a night, but not all at 1am...although most were within 2 hours of the same time.
I was able to get through them. However, I had 4 Crystal Job servers. Its all about your hardware being taxed.
I broke off my CMS away from the processing tier. So I could have multiple Crystal Job servers.
We had 3 processing tier servers all doing Crystal Jobs and Webi jobs. I had 60 running at one time for Crystal. 20 per job server.
i could have added the Crystal job servers to the same server, but the hardware was getting busy.
I would have at least 2 CMS's as they support 500 concurrent users (Sessions?) each.
This helped us - and we had over 8k reports in our repository. We were getting bound by memory constraints.
Once you get to 64 bit OS and App, (BO XI 4.0 sometime in 2010) it will help with this problem.
The only other way in the 32 bit environment is to add servers, even VM's if you have to as long as they are different hosts, but that adds expensive BOE CPU licenses - the big caveat to that.
That's how we solved the problem...

I recently downloaded / installed FCP X before reading to NOT install it on a volume containing a previous version of FCP. I installed FCP X in the same Applications folder as FCP v6. I have moved FCP 6 to the trash, but now, should I reinstall FCP X?

I recently downloaded / installed FCP X into the same folder as a previous version of FCP before reading to NOT do that. I've trashed the older version of FCP, but now what? Has there been damage done? Should I trash FCP X and reinstall it?

Paulbernard wrote:
Hi Andy, You say that when installing FCP X the old FCP should move to a new folder called Final Cut Studio. I have just installed FCP X Trial and checked in the applications folders and nothing has changed. Final Cut Pro is where it has always been.
Hmm. I din't have experience of the trial version - maybe it doesn't move legacy FCP.
Make a new folder (Final Cut Studio) in the Applications folder, and drag FCP there.
I have also found that the sound effects in FCP X keep disappearing and I need to re start FCP X for them to appear again. This has happened several times today.
This could be a case of a conflict with Final Cut Pro. What do you think?
I doubt it, but FCP X is a fickle application.
If moving FCP doesn't fix it, post a new topic to ask about this.
Andy

I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

I have an older Macbook with OS/X. Tried to download iTunes 10 a few times now, but when installing I always get the same error message: Run Preinstall Script for Apple Mobile Device Support. What can I do to finalise the installation?

Thanks. Short of the sort of "generic" suggestions of restaring your system, if you haven't, and repairing disk permissions and verifying the disk, I don't have any advice right now. I'll do some research and see if I can come across anything. Meanwhile, someone else may have an idea.
Regards.

I have elements 5 on a vista pc. Elements will not open I receive the message "Attempt to access invalid address". Ihave re-installed but still receive the same message. Any ideas please.

I have elements 5 on a vista pc. Elements will not open I receive the message "Attempt to access invalid address". I have re-installed but still receive the same message. Any ideas please.

Make sure your user account has full administrative permissions. Then, at this stage of the game, I would take the following steps:
- Re-create the Preferences file following these instructions:
Re-create the Photoshop Elements preferences file to eliminate problems that a damaged preferences file might cause.
Note: When you use this solution, Photoshop Elements will create a new preferences file and you will lose custom settings associated with your current preferences file. However, the file you rename in step 2 is your original preferences file. If you determine that the preferences file is not causing the problem, then you can restore your custom settings by undoing the instructions below.
To re-create the Photoshop Elements preferences file:
Quit Photoshop Elements.
Locate the Adobe Photoshop Elements preferences files. In Photoshop Elements 5.0, there are two preferences files, one for Organizer and one for Editor:
Users\[ user ]\AppData\Roaming\Adobe\Photoshop Elements\5.0\Organizer\psa.prf
Users\[ user ]\AppData\Roaming\Adobe\Photoshop Elements\5.0\Editor\Photoshop Elements 5 Prefs.psp
Rename the extension for the files (for example, to psa.old).
Start Photoshop Elements. Photoshop Elements creates a new preferences file.
I doubt that this will fix your problem, however, it is always the first thing to try. If it does not, take these steps:
- Uninstall Photoshop Elements
- Run the Windows Installer CleanUp Utility (http://support.microsoft.com/kb/290301)
- Reinstall Elements
- Reinstall the 5.0.2 patch
Good luck,
Juergen

How to install several instances of the same application on a computer?

Hej,
I have an application in LV 2009, where I have created an installer. The installer installs to a directory called \Receiver relative to the Program Files directory. If I install this once to a computer, everything is OK.
However, I want to install the same application twice on the same computer. There should be no conflicts between the two applications, since I can configure them to work on different directories and ports. But if I call the installer again, and selects another directory, nothing is installed and I get the message "Installation Summary - No software will be installed or removed". It seems like the installer ignores that I have selected another directory, and just uses the default directory, relative to the Program Files directory.
Anyone knows the trick, how to install several instances on the same computer ?
BR, Jan
Jan Nielsen
Freelance system analyst and LabVIEW programmer

Hi Jan,
This is so because each installer has a GUID that is used to check whether the application needs to be upgraded or not. (It's a Microsoft function).
What you can do is create a new installer with a different GUID (copy the installer in the projects), and check witha text editor whether this GUID has changed.
But any specific reason you need two seperate installs? You can run the application twice with a specific INI token:
allowmultipleinstances=True
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Hi, I have been using CS5 for a while now, but had to wipe my computer clean last night and now am unable to re-install my adobe on the same computer. Help please.

Hi, I have been using CS5 for a while now, but had to wipe my computer clean last night and now am unable to re-install my adobe on the same computer. Help please.

Can you describe more about what you summarize as "unable to re-install my adobe on the same computer." ? What actions do you take and what results? What messages do you get? Are you able to install it on a different computer?
Since you use the word "same", it might be a case that you do have another machine that the install is functional on. If so, or even if you installed a couple of times on the same machine, it might be a case where your activation allowance has been used up and you need to have them reset. If you contact Adobe Support thru chat you can ask them to reset your activations so that you have the two allotted to you available again.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

When firefox updates, I cannot re-open it. It appears in the dock at the bottom, then disappears. I uninstall, re-install, but it does the same.

When firefox updates, I cannot re-open it. It appears in the dock at the bottom, then disappears. I uninstall, re-install, but it does the same.
It opens after initial install of 3.6.8, but as soon as I add the roboform and downthemall add-ins it restarts and won't open again.
I have had these add-ins for awhile without issues, but for the past two days, I have had to reinstall it twice, and this time it won't work.

hello leehuiling, what kind of security software are you using on the computer?

Can I install to instance of the same LabVIEW version

Hi,
I 'd like to know if I it is possible to install 2 instance of the same version of LabVIEW on the same computer.
because my LV8.5 licence has expired i'd like to install a demo LV8.5 version and I 'd like to know if I can install both onmy computer
Thanks
Olivier

Probably not, because they are both the same thing and just differ in the activation state.
LabVIEW Champion . Do more with less code and in less time .

Dear Sir or Madam, I installed Window 8 on the same Notebook where a working version of DreamWeaver

Dear Sir or Madam, I installed Window 8 on the same Notebook where a working version of DreamWeaver was installed. After then, when I start DreamWeaver I receive the Message: Activation limit reached”. What can I do? Thank You for your answer. Ovidio

Before upgrading your Operating system, you have to de-activate and un-install the software.
As you have just un-installed the software, your receiving the above error, please contact Phone Support or Live Chat for reset activation.
However, you can install the Software on the third Computer by de-activating the Software from one of the older one and then install it on the new one so that you can avoid any error message while activating the Software.

Install 2 OraMTS on the same DB ?

Similar Messages

Maybe you are looking for