Install 250GB 7200RPM PATA [IDE, EIDE] HARD DRIVE into Mac G5
I have a 250 GB drive that I purchased in a LaCie Firewire enclosure that still works just fine, but won't mount from the external enclosure. We determined that the case's power supply is faulty. I want to install it into the open drive bay in my G5, but the cables are not compatible. Is there an adapter set that I can purchase to install this into the second SATA drive bay? it appears there might be several options on NewEgg, but I'm not familiar enough with the drive types to make an intelligent choice.
Any help?
Hi Jerry, there are IDE->SATA adapters, but they may not fit in the G5...
http://www.satacables.com/html/sata-acessories.html
Personally I'd go for a newer, faster, bigger drive ib the G5...
http://eshop.macsales.com/shop/hard-drives/3.5-SerialATA/WesternDigitalCaviar
Similar Messages
-
hello everyone. I have recently installed a Samsung SSD (solid state hard drive) into my destop PC. For some reason Lightroom does not see it ? So i cannot ingest photos from it, or copy photos from a card to it. It is not listed as a drive option. LR sees every other drive. My computer sees it fine, so i was able to create a catalogue there. Im running windows 8.1. Any ideas ? I will also add that this drive became corrupt and was repaired by Samsung. Maybe they didn't do a very good job.. ..
Yes pretty much that, but to clarify sorry
Opened Lightroom.
Create new catalogue.
This opened the Windows 8 file explorer window and Windows recognises the drive. So I was able to create a catalogue there and save.
I then inserted my memory card into my card reader which LR recognised. I selected it, chose all the photos within and then navigated to the right side of the Lr import dialogue window to locate this problem drive as on this occasion i want the RAW files on the same drive as the lrcat. However all my other drives are listed but not this Samsung SSD.
In addition this Samsung SSD is not listed a drive to import from in the same dialogue window. -
I have a 15" MacBook Pro with Mountain Lion installed. I have partitioned the hard drive into two partitions. Is it possible to install Snow Leopard on the second partition? If so how do I do it?
If your MacBook Pro had Snow Leopard on it at one time then sure. (Early 2011 or earlier)
How to erase and install Snow Leopard 10.6
Obviously choose the second partition to install into. It has to be OS X Extended journaled formatted in Disk Utility (BootCamp software makes it a MSDOS/FAT32 formatted partition if you used that to partition with)
If it's a Early 2011 or Late 2011 that came with 10.7, it's possible, but it's not easy.
https://discussions.apple.com/thread/3264421?start=0&tstart=0
If you can't install Snow Leopard, there is a thread over at MacRumors how to run Snow Leopard in a virtual machine program under 10.7 or 10.8 -
How to install hard drive into mac pro
how to install hard drive into mac pro
I recently bought a new 2TB internal sata drive for my Macpro.
The installation was easy, but I'm not sure what to do next.
For one, should I partition the drive?
My purpose for buying the drive was to use it as my go to drive for Parallels. I used to run my music studio on Windows based machines, and my older project files require a windows OS to recover. I installed Parallels so I can have my studio running Mac and Windows programs which will enable me to access my old project files and take them into my newer Protools system.
So now, I've installed my new hard drive, but I'm not sure if I should partition it....And!? I'm not sure how to designate that drive for my virtual pc on Parallels. I was able to allocate enough disk space to parallels in order to load my music software, but at this point, I'm not sure if I've just promised it disk space from my original partitioned drive (which only has about 350 GB left on it).
I would love to be able to make one internal drive available for Parallels, and the other available for the rest of my OSX. When I use Parallels, I still would like to save some extra information on the 2TB drive as well from my dekstop running OSX.
I hope this makes sense! Your help is much appreciated! -
Cant install mountain lion on a new hard drive 2011 mac pro 17"
for some reason I bought the infamous 2011 mac pro, and the hard drive kept having IN/OUT problems and after it destroyed half day of work, I decided to get a new hard drive, *blue WD 500g" but i have tried EVERYTHING and i just cant install mountain lion on it.
1.- i tried forcing the recovery mode so It would connect to the internet and download mountain lion but after 10 min or so i trows the -2002f error at me
2.- I tried to use the old hard drive that i put on a external hard drive reader so I could get the recovery partition but i just keep restarting the installation no reason given
3.- downloaded the mountain lion and tried to installing it on the system hard drive of the laptop trough a computer running snow leopard but dosn't let me.
4.- tried the same thing on target mode without success
5.- using the recovery partition I used disk utility to se of the partition was locked but it was not
6.- created a different partition to see if it would install it there didn't work.
i just don't understand why
any toughs?
if you answer this you would be a personal hero of mine
cheersMake Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this entire command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume
/Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time. -
Shall i put a 7200rpm hard drive into my black macbook for logic pro?
hi, i bought high spec black macbook refurbished which came with a 5400rpm drive inside it.
Im using logic pro, and its been running fine with small projects, but when i have a medium sized project using several vst instruments and exs24s using many audio samples, all of which are running off the internal.... i get error messages, system overload messages...and i am unable to bounce to audio file (in logic pro)
im thinking its the slow hard drive which is causing the main problems.
I have 2gb ram. It also takes sometimes over 5 mins to open this logic file. And then some!
Or is this poor performance par for the course, if using just ONE internal drive, for both system files and audio storage....... ?
Are there possible probs which may arise from taking out the 5400 drive and fitting a faster 7200 drive in to my macbook? I hear it will heat up more....so could this mess with other macbook componets?? the excess heat...... or are macbooks bulit to handle 7200rpm drives too??? dont remember is 7200 was an optional upgrade with my model or not......
2.4ghz intelcore2duo.
Anybody fitted a 7200 drive into their macbooks???? all running ok??
Would i simply put the new hard drive in..... and then boot up from boot dvds and my time machine backup....to have a full up to date system, all apps and file intact as they are now???? Im worried it will get messy and problems...... my current drive is packed to rafters with apps and files and work i have done......i dont want to lose a thing.....would it be a simple easy fool proof transition to faster hard drive????
And could i still use the current hard drive? With an enclosure??
Ive heard people have ripped out the opticla dvd drive and fitted ANOTHER hard drive into their macbooks, so the laptop housing two hard drives..... that sounds good...but crazy..... maybe later ill do that....as i hardly use the cd/dvd drive...... and you can always hook it up with wire if need be......
any tips or advice....would be most kind and helpful.
thankyou.I used Carbon Copy Cloner- do not use Time Machine for this- to make a bootable clone of the drive inside my Macbook Pro, and then installed the new, faster drive. I then booted from the cloned drive, and cloned that back into the fresh internal drive. That being said:
1) I only did this since I bought the laptop used, and didn't get the install OS discs. I would have started fresh and installed everything myself, but then again, it wasn't my laptop, and I didn't care about what was on it. You might.
2) You need to clone to an external Firewire drive if you want to make a bootable clone. Do not use USB. Do not use Time Machine, as its backups are not able to be booted from.
3) The whole replace the internal DVD drive with another sounds pretty iffy to me. Just use the Firewire drive you'll now be having at you disposal for a variety of things, including possibly recording to. I can advise once I know what your interface is, if any, and if you've got a Macbook or a Macbook Pro- I forgot to look.
You will get much better results with a 7200 RPM drive, by the way. You can certainly use the old drive in some sort of enclosure, although it's still a slow drive and all, so I wouldn't really invest much into it. Maybe put it in a USB enclosure and use it for backups, or for transporting material, or for cracking walnuts, maybe, if you have a walnut tree.
Even in this fancy computer age, there is still nothing better than a freshly roasted walnut or pecan. Good luck, L -
Trouble installing 10.4 on a new hard drive
My hard drive died, so I'm trying to install 10.4 on a new hard drive. I'm using the same disk that came with my laptop. I get as far as "select a destination" and the hard drive doesn't show up to choose. I saw another post that suggested partitioning the hard drive first, so I did that, and still no luck. Can anyone help?
Thanks for the welcome, and for the attempt to help. I'm starting to wonder if I got a bum replacement hard drive? I've just restarted twice, it now takes FOREVER for the apple and the little spinny thing to show up when I start up and hold down the C key, and now when I go to disk utility the hard drive doesn't show up in the list of choices at all. Do you think it's worth pulling out the hard drive and sticking it back in again? I have no idea if that will make any difference?
-
After installing Mountain Lion doesn't external hard drives mount or stay mounted.
I have tried resetting my Mac's PRAM but the problem still remains.
Even USB memory sticks are unmounted efter a few seconds.
Anybody else with this major problem?I have the same problem, although mine has not been solved by ESET update, finder settings, PRAM & SMC resets or anything else.
Don't get it, my external hard drive still works on both my housemates computers - one macbook pro (with snow leopard) and one dell, just not on mine with mountain lion.
Any ideas for me guys? -
Can I install a program on an External Hard Drive?
I have an 500 GB external hard drive that I attach to my MBP to store movies and my aperture picture libraries. When I first got it, I created three Mac OS Extended (journaled) partitions, one for movies, one for pictures and the other one for “extras”. I’d like to install Adobe Photoshop on my external hard drive, so I’d like to know if there is a way to make any one of my three partitions operate as if they were a system partition. Can I install an application in an external hard drive? Can I run an application from an external hard drive? Which formatting solution could help me achieve what I want? Is this even possible? Any suggestions?
There are many applications that are happy to be installed on a partition other than the boot partition. However, if the Adobe Photoshop installer does no present you with that option I wouldn't. You could always copy it across post-installation to see if it will work. Updating my present issues.
-
Can I install a 1TB Hard Drive into a late 2007 17" MacBook Pro?
Can I install a 1TB Hard Drive into a late 2007 17" MacBook Pro currently running a 160 GB Hard Drive?
It depends upon exactly what you want to do with your Mac. My old Late 2007 17" MacBook Pro only has 4GB RAM and it works fine. It is a little slow if I am doing anything involving heavy computing (rendering video, compiling programs, etc.) but it works just fine. In most cases, the increased RAM will help performance, but the cost can be fairly high with an older machine like you have.
-
How do I install Lion on a 2nd (SSD) hard drive?
I installed and formatted a 128 GB solid-state drive (SSD) on my Mac Pro. (My Mac Pro has four drives: a hard drive with Lion, a hard drive with Leopard for a legacy app, a hard drive for Time Machine, and the new SSD.) I went to the app store to download Lion to install on the SSD but I can't figure out how to download it. The download button says "Installed." Rebooting from the Leopard hard drive won't work because Lion can only be installed on a computer running Snow Leopard. (I tried to update the Leopard hard drive to Snow Leopard but for unknown reasons it won't let me.) I looked for the Lion Installer in my Downloads folder but I can't find it there. What should I do?
A good answer would be to return the SSD! I've spent hours trying to install this, to make my computer a couple seconds faster. The first 2.5" to 3.5" drive adapter didn't work because it was made for computers with cables, not for computers with sleds. Finding the right adapter was a challenge (and cost $40).You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
-
I have a 2007 Macbook Pro that is running 10.7.5 and I am trying to use a 10.6.3 DVD to install Snow Leopard to an external hard drive. I've followed every possible instruction on every which website. The problem is when I boot to Install disc, I am unable to choose which hard drive I'd like to install the OS on. It says that it is unable to Install and automatically takes me to Restore and suggests that I restore to Time Machine backups. Any and all help is appreciated.
lovinlife5959,
have you tried booting from the grey Mac OS X Install DVD that originally came in the box with your MacBook Pro? See if you can install its version of Mac OS X (either 10.4.9, 10.4.10, or 10.5.0, depending upon when it shipped from the factory) onto your external hard drive. If that works, boot from your external hard drive, run Software Update on it, and then try updating your external drive to 10.6.3 via the white Snow Leopard DVD. -
I have a Window 7 HP laptop. I want to install Snow Leopard on an external hard drive as the memory space on my laptop is very less. I have the original snow leopard disc and I think it's a retail version . Please guide me through the installation in details. Can you also please let me know about this boot camp.
You cannot. From a legal standpoint, the license agreement for OS X mandates that you run OS X only on Apple hardware. HP is not (yet) owned by Apple.
From a technical standpoint, your HP laptop doesn't use EFI, but rather an early predecessor called a BIOS. Apple is the only vendor of consumer computer hardware that uses EFI; other vendors reserve EFI for use in servers.
Secondly, Apple's operating systems support a rather limited number of configurations of video hardware and mainboard chipsets directly since they need only support those systems that they manufacture. You cannot use Windows software or drivers on OS X, so prior to installation, you would need to write your own hardware drivers for your laptop, create an OS X drive image on a Mac, and then modify that image with your drivers before putting it in the HP.
It will be simpler (and legal), to simply purchase a used Mac. Apple's online store has refurbished MacBook Airs starting at $850 and Mac Minis for $700. If you go to e-bay or craigslist, you'll find used Macs for considerably less. -
Can I install snow leopard on an external hard drive in order to run my quicken 2006, and install lion on the hard drive of my imac?
You don't need to erase the drive and repartition from scratch. You may be able to add a second partition on the fly. The caveat here is that once you do that you cannot create a Windows partition using Boot Camp. Of course if you have no plans for Boot Camp then it isn't relevant.
To create a second partition on your existing startup volume:
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Now, you cannot add a new partition that exceeds the amount of contiguous free space at the end of the drive. Disk Utility will fail to add the partition if it cannot find sufficient contiguous free space. If that's the case then you will need to follow your state outline - backup, boot from clone, erase internal, repartition internal, restore backup to one of the partitions (or both in your case.) -
hi, i had to re install my itunes library from a hard drive to my new laptop. Now itunes thinks i am trying to add new albums and saying there isnt enoug space. should i restore or is there a better way.
Have you tried exporting a 10 second section of the footage to see if the issue shows up once the seqeunce is actually exported from the timeline. I edit on CS5 with windows 7 pro at work quite often and have no issues so I assure you that isn't the issue. I also edit with AVCHD footage when at home and work quite freqeuntly as well so I'm positive that isn't the issue. It sounds like a GPU driver has been corrupted in the way it interacts with premiere pro. What type of GPU do you have? If it supports MPE's GPU acceleration have you tried turning it off and seeing if that makes any difference?
Anyways though try to export a 10 second test section of your timeline to see if when the clip is exported from premiere it will play normally in windows media player or vlc or w/e media player you want to use. If it exports fine then you can almost be positive it's a corrupted video card driver. If that's the case I'd re-install your GPU's driver and also check your gpu makers website to see if they have a updated driver avaiable.
Maybe you are looking for
-
IMovie '09 & Canon's VIXIA HF S10 Camcorder
Does anyone know if I will be able to use Canon's VIXIA HF S10 Camcorder with iMovie '09 without running into any issues when it comes time to output my video at it's highest resolution? I ask only because this particular camcorder is Canon's newest
-
How can i change the language of the creative cloud?
I already changed the settings in the application manager, restarted every app and the application manager, rebooted my computer but the only app that changed language is photoshop... I want all my apps to be in english! Do i need to reinstall all of
-
Escape characters such as \n dont work??
Im taking a string eg "Hello \n World" from an xml file. However when I system out the resulting string I get Hello \n World whereas I'd expect Hello World Anyway round this?? I'd appreciate any input.
-
I have my TC in my Bedroom, So the light can be bright. Is there any way to turn the light off?
I have my TC in my Bedroom, So the light can be bright. Is there any way to turn the light off?
-
Unfortunately, I keep getting the error "can not connect to iTunes. Code:0" I've tried rebooting, signing out of my apple ID, can someone please help or advise me on what to do? Many thanks, Ryan