Install 46D EXT2 on Windows x64 and Oracle 10g

Hello,
When i try to install a SAP 4.6C system on Windows ORACLE 10.2.0.2 and Windows AMD_64 (x64).
I've got an error in the creation of the database (see below). The Centrale instance wae created successfully.
I've changed KERNEL CD to the 46DEXT2 (INSORA102_0.SAR) version and also applied OSS Note 976457 to update various Windows DLL .
The problem is when launching R3SETUP, it goes to subdirectory ZSAPORAICL like you can see.
Why ? Is there's an error on 46D Kernel CD ?
Do you have any idea ? Already had the same problem ?
Thanks for your help
Best regards
Gaël
INFO 2008-10-31 11:13:09
    Creating Database Instance
INFO 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA SyCoprocessCreate:931
    Creating coprocess C:UsersproadmInstallZSAPORAICLBINORADIM
INFO 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA ExecuteDo:0
    DIM-00019: Message 19 not found; No message file for
    product=RDBMS, facility=ORADIM
    O/S-Error: (OS 1073) The specified service already exists.
INFO 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA ExecuteDo:0
    RC code form SyCoprocessWait  = 19 .
ERROR 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA ExecuteCheck:0
    Exit code from C:UsersproadmInstallZSAPORAICLBINORADIM: 19.
ERROR 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA InternalInstallationDo:0
    Phase failed.
ERROR 2008-10-31 11:13:09 DBCREATEINSTANCE_NT_ORA InstallationDo:0
    Phase failed.
ERROR 2008-10-31 11:13:09 InstController Action:0
    Step DBCREATEINSTANCE_NT_ORA could not be performed.
ERROR 2008-10-31 11:13:09 Main
    Installation failed.
ERROR 2008-10-31 11:13:09 Main
    Installation aborted.

Hi.
You will get the detail installation of "Oracle Policy Manager" in the following link.....
http://www.oracle.com/technology/obe/obe10gdb/install/lsinstall/lsinstall.htm#t3
Regards
Shweta.
DBA
IBCS-PRIMAX Software(Bangladesh) Ltd.
[email protected]

Similar Messages

  • OS/DB Migration to Windows X64 bit /Oracle 10G from OS400/DB4 V5R4

    Hi,
    We need to do the OS/ DB migration in BI servers .. Kindly guide me .. what are the prerequesties ?
    I think we can achieve this throught Heterogeneous system copy .
    Source system    Target system
    NW2004 -BI 7.0   NW2004 -BI 7.0
    DB4 V5R4           Oracle 10G
    OS400               Win2003 x64
    SAP kernel 700    SAP Kernel 700
    Thanks in advance ..
    gnanaprakasam

    Hi
    You need perform a heterogeneus system copy with sapinst
    Chose the sap system->Software Life-Cycle options->system copy->database
    And perform in tree steps
    export preparation
    table splitting preparation
    database istance export
    It create a export database, and with the sapinst you import in Target system
    More info
    http://service.sap.com/instguides
    Heterogeneous system copy
    Regards
    William Neira

  • Install Oracle 11i Suite and Oracle 10g on same Server

    Hi
    We are an Educational firm planning to launching Oracle 11i and 10g.
    Can I install both the Oracle 11i E-Business Suite and Oracle 10g on the same Server? If it can What is best configuration for the Server that can I bought?
    provide Configuration too.
    thanks

    "However, I do not suggest any windows platform for 11i as that is not so good os for 11i. You may either go far unix or linux" - 140042
    That's absolutely right. It is better to have at least two linux/unix machines:
    # 1 machine for application server - admin, web, form, concurrent services
    # 2 machine for DB server
    If you want, you may integrate Oracle apps 11.5.10 (on #1 and # machines) with OracleAS 10g (# machine).

  • Installing XE Client en Windows 7 and using OLEDB

    Hello,
    I'm trying to use XECLient with OLEDB on Win 7 but when installing XE client on Windows 7, the "Oracle Provider for OLE DB" doesn't appear in the Providers List (ex : in a udl file).
    I've tried to do this "regsvr32 OraOLEDB10.dll" and this is ok (dll registered successfully). But still no Oracle Provider !
    I need help please !
    Thanks.

    Hi there !
    I have the same problem On Windows 7 Professional 32bits (on several PC).
    After installing XEClient as an Administrator.
    I can't connect to my server with OLEDB (MS Access 2010).
    I have error message "provider not found" or sometimes it will just crash without going to VBA error handler !
    If I "regsvr32 OraOLEDB10.dll" sometimes it works an sometimes it does not.
    But anyway it won't help for the connexion.
    Sometimes launching sqlplus will crashes also ! But will work if I launch it as a Administrator.
    There is a workaround : installing OracleXE (the database) on the same machine will resolve the problem..
    Then we can just stop the unused Oracle services with MSConfig.
    When I install OracleXE.exe I see that my user get the ORA_DBA groupe...
    If someone can help finding a better solution...
    Thx all !

  • Problems with Windows x64 and Sound blaster l

    Hey, I have this issue with my sound blaster li've. I've just recently installed Windows x64 and now I'm having issues with my sound. It creates this weird echo sound with a small static sound everytime a game. Prior to loading any applications, the sound is just fine. I had this issue when I had Windows XP but I installed the Li've applications and was able stop that. But I can't install that application for Windows x64. Is there any solution to this? Thanks in advance.

    kennydo you have aim or msn or anything where we can talk, because i have relati'vely same stuff as you. Thanks very much

  • HT1926 iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

    iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

    Many thanks.
    Error 7 (Windows error 127)
    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Should I use HPSA application to install recommended HP updates, windows updates and tune-ups?

    Should I use HPSA application to install recommended HP updates, windows updates and tune-ups?  I understand you can select the updates that you want to install but I always select and install the recommended updates through HPSA.
    Thanks.
    This question was solved.
    View Solution.

    Yes you can except for BIOS update. Rest if you like, you could confirm if the version and date of the driver notified is that which is given in your HP support page.
    You can follow the suggestions given in your other thread: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-Support-Assistant-gt-HP-Upda...
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • I have installed LR 6 for windows (win7) and LR will not start but hangs up

    I have installed LR 6 for windows (win7) and LR will not start but hangs up. I have uninstalled the software and re-installed it, Tried to open it as Administrator and it still hangs up with the Adobe banner (the picture) being displayed. Nothing happens. When I click on anything I get the message that Lightroom is not responding. I have asked to have a new catalog created for Lightroom 6............Please help.
    Thank you. Leo

    hbereth,,
    It is Ideal to install Creative Cloud app , if you are using Adobe apps.
    Creative Cloud is nothing but an updated version of Adobe Application manager. Adobe Application Manager is required for different purposes like Activation, Update.process and installation processes.etc
    Adobe application manager must be up to date , that brings to Creative Cloud application which is the updated version .
    No need to Sign in and all , just keep it install, if you are not okay with installing Creative Cloud app. it's okay , you can still have Adobe Application Manager only.

  • Integration b/w uccx7.0 and oracle 10g

    hi,
    currently i am doing integration b/w uccx7.0 and oracle 10g. i have installed the oracle client 10g . and i added the DSN in ODBC and also the test connection is succesful.. but when i mention the DSN in app admin page (Subsytem> Database). it is showing me error that some of the information is incorrect for the connection. and is not allowing me to add DSN in appadmin page of uccx 7.0.. even though i am using the same information in sqlplus to query the database from ipccx. Do i need to mention sth to make it work.
    Regards
    Nareh

    Hi there
    A few things you have to watch out for.
    Firstly if you have create the DSN and able to connect to it via the ODBC its more likely that the driver was not loaded correctly.
    - Remove the Driver and DNS
    - Install the driver again and create the DSN and test if it works
    - Reload the whole windows <----- was working on a case for 3 hours UCCX just wasn't loading the new 10g drivers reload fixed this
    Now create the database connection and test.
    Should this not work you can try the following:
    CSCtb80893

  • How to install patch GridControl_10.2.0.4_Win32 on oracle 10g r2

    Hi
    How to install GridControl_10.2.0.4_Win32 on windows 2003 for Oracle 10g r2.
    If any one has steps ,please send me.

    Hi
    You will have to install each components for your grid controller
    - Management Server (OMS): Middle tier server that handles communication with the intelligent agents. The OEM Console connects to the management server to monitor and configure the Oracle enterprise.
    - Database repository
    - Agent repository
    - Agents on all the servers
    Please dedicated specific homes for each components.
    Enterprise Manager is installed on multiple Oracle homes within the Oracle base directory. This means that a typical Enterprise Manager Grid Control installation creates three Oracle homes in different Oracle home directories. For example, oms10g, db10g, and agent10g.
    Please read also that : http://download.oracle.com/docs/cd/B19306_01/em.102/b40103/pre-installation_requirements.htm#BABFEAIA
    Full Documentation
    http://download.oracle.com/docs/cd/B19306_01/em.102/b40103/pre-installation_requirements.htm
    Hope this helps.
    p.s
    DBConsole:
    emctl start dbconsole
    emctl stop dbconsole
    Grid Control:
    emctl start oms
    emctl stop oms

  • Oracle 9i and Oracle 10g in same machine

    I have Oracle 9i in a machine. I wanted to install Oracle 10g in the same machine.
    I tried installed, and Oracle 10g worked ok.
    I have the following problems:
    1. Oracle 9i is not starting up. {Oracle 9i Intelligent Agent Failure on startup}
    2. I need to use Oracle 9i and Oracle 10g simultaneously.
    If any one have experianced this please help to resolve the issue.
    Thanks in advance.
    Srini

    You must use 2 different homes, and later you have to take care of your environment variables, and you must use only one listener in this case the highest version that is 10g.
    Tell us: did you install in the same ORACLE_HOME?
    Give us details.
    Pao.

  • Our Java application is built with java 1.4 version and oracle 10g

    Our Java application is built with java 1.4 version and oracle 10g version database, is it possible to upgrade oracle database to 11g?

    is it possible to upgrade
    Yes. SE and the other editions have a migration/upgrade utility, not seeing any mention of that program in the XE license docs. To upgrade to 11gR2 from 10g, the 10g instance must be at patch 10.2.0.2 or higher.
    So if you're a GUI dba, might be out of luck. But the the XE install has the catalog upgrade scripts that need to be run, there is a MOS note explaining the manual upgrade steps.
    Or set up a brand new 11g database instance and datapump your user schema(s) from the 10g instance to the new 11g instance. The database doesn't care what java version you're using, it just does what its told with the data. DDL, DCL, DML ... its not much different. Quite a few new features in 11g.
    But if you're after JVMs that piece is not supported with XE.

  • Oracle Streams b/w MS-Access 2007 and Oracle 10g.

    Can we set up Oracle Streams between MS-Access 2007 and Oracle 10g? Ms-Access as source and Oracle 10g as destination database. If so, can any one please give me little heads up with supported doc's or any source of info.

    Help Help....!!!

  • Using Clob with TopLink 9.0.4.5 and Oracle 10g RAC

    I am trying to store an XML file in a Clob type field of a DB table using TopLink 9.0.4.5 and Oracle 10g RAC and need some guidance about how to do it. I got some directions to start it with the Tip "How-To: Map Large Objects (LOBs) to Oracle Databases with OracleAS TopLink" but still need some more helps.
    When using the Oracle JDBC OCI driver, the tip gives the code block for a Clob field:
    DirectToField scriptMapping = new DirectToField();
    scriptMapping.setAttributeName("script");
    scriptMapping.setFieldName("IMAGE.SCRIPT");
    descriptor.addMapping(scriptMapping);
    As I understand, TopLink creates instances of the Descriptor class at run time for each of the descriptor files and stores them in a database session, where is the proper place (in SessionEvent of TopLinkSessionEventHandler?) for me to get a reference to such an instance of my Descriptor class in Java code so that I can add the above mentioned additional Mapping? Are the above String values of "script" and "IMAGE.SCRIPT" predefined in TopLink API? Can I accomplish the same thing just using the TopLink Workbench tool instead? If yes, please advise the detailed steps to do so.
    The tip also states to call the following code in case of using Clob:
    DatabaseLogin login = session.getLogin();
    login.useStringBinding();
    Should the above 2 lines of code be called after the following lines of code?
    SessionManager sessionManager = SessionManager.getManager();
    Server serverSession = (Server)sessionManager.getSession("MY_SESSION_NAME");
    Besides the above extra coding for the Session and Descriptor Mapping, is there any special handling in between Data model and DB table mapping? Can I map a Java String type to a DB Clob field using the Direct-to-field mapping?
    Appreciate any help.

    Never mind ....... I had already figured it out .....

  • Help building an e-commerce site using DreamWeaver MX 2004 and Oracle 10G

    I'm new to using Oracle 10G. After reviewing several rdms's I've picked Oracle 10G as my rdms. I'm trying to build an ecommerce site using DreamWeaver MX 2004 and Oracle 10G. The website will be selling hardware and software products. I have a choice in DreamWeaver to go for a .asp or .jsp setup. I have several questions, here goes:
    1. Is there any book/tutorial/whitepaper out there that describes building an ecommerce site using Oracle 10G/9I/8I? Just some examples as how to make the datamodel regarding the shopping basket etc.
    2. I prefer DreamWeaver as it let's me make nice looking css style based pages without throttling too much through the code. Are there Oracle tools which allow me to make an advanced nice looking ecommerce site?
    I hope some of you can help me get started. Any effort is appreciated.
    Cheers

    I'm new to using Oracle 10G. After reviewing several rdms's I've picked Oracle 10G as my rdms. I'm trying to build an ecommerce site using DreamWeaver MX 2004 and Oracle 10G. The website will be selling hardware and software products. I have a choice in DreamWeaver to go for a .asp or .jsp setup. I have several questions, here goes:
    1. Is there any book/tutorial/whitepaper out there that describes building an ecommerce site using Oracle 10G/9I/8I? Just some examples as how to make the datamodel regarding the shopping basket etc.
    2. I prefer DreamWeaver as it let's me make nice looking css style based pages without throttling too much through the code. Are there Oracle tools which allow me to make an advanced nice looking ecommerce site?
    I hope some of you can help me get started. Any effort is appreciated.
    Cheers

Maybe you are looking for