Install 5.7 installer wants 5.3

This has probably been asked several times, so I apologize, but I couldn't find a solution.
I have installed 5.7 on two other systems with NO PROBLEMS. But I am unable to install the update on one, and I have tried several times. Hopefully someone has the magic!
Windows 7 64bit. All updates from Microsoft. 5.3 is installed on drive S:\Program Files\Adobe\Adobe Photoshop Lightroom 5.3
During the install of 5.7, first it cannot find Adobe_Lightroom_x64.msi, so I browse to the appropriate folder.
Then I get:
The file ...Adobe_Lightroom_X64.msi is not a valid installation package for the product Adobe Photoshop Lightroom 5.3 64 bit. Try to find the installation package... from which you can install Adobe Photoshop Lightroom 5.3 64 bit..
I KNOW I am using the correct installer - the is no other Adobe installer on the system (I searched for .msi files), and the Adobe installer has a current date and time on it.
Any solutions?? 5.3 is working fine. I am reluctant to uninstall it, because then I would have to start ALL OVER.
Thaink!!
Al

uninstall whatever lr you're trying to update and directly install lr 5.7.1:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Similar Messages

If I already have the android SDK and AVD installed from prior installation for eclipse do I have to

If I already have the android SDK and AVD installed from prior installation for eclipse do I have to do it again for dreamweaver if I want to develop for android ?
Also, if I'm developing for android, ipad, and iphone and I want them all to be the same can I do it by only making one site or I have to make a different site location for each?

Inquire of whom? Apple? Seems to me your carrier is giving you the run-around. They are the ones who provide the service, so they should be able to tell you the plan specifics. Get on the phone again with them and insist on an answer.

Installing MSCS cluster installation

HI Guru,
I want to installing MSCS cluster installation on win 2003 ENT.with sql server 2005 .
Choosing High availability (ABAP)
Please Guide me prerequisite & partation on local & shared disk.
Its Urgent.
Personal mail ID is [email protected]
Regards
Amol kulkarni

Hi,
You know what ?
Step by step installation is different in every company because each company has a different usage of SAP software.
It is precisly your job as a SAP sys admin, to study the problem, to solve it and to write the step by step documentation.
In my company, it took me one month and my documentation is 250 pages long.
You will not get someone else doing YOUR job instead of you.
The standard SAP documenation is perfectly enough to study your particular case...
Good luck !
Olivier

Lion Install Failed "The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."

Not a comforting message to see...
Here are the errors just before the above message is emitted and the install ends.
Jul 26 05:33:33 localhost OSInstaller[344]: PackageKit: Extracting file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/Essentials.pkg (destination=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, uid=0)
Jul 26 05:34:51 localhost OSInstaller[344]: PackageKit: Got copier error 2 extracting to path ./usr/lib/zsh/4.3.11/zsh/zselect.so: Read-only file system
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/DataPool.c:135: Error: finished pool without filling it
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/commonUtils.c:360: Error: fh_pread -1
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/StreamCompressor.c :294: Error: pread failed for /Volumes/i7Mac/.OSInstallSandbox-tmp/Root//usr/lib/zsh/4.3.11/zsh/zselect.so: Undefined error: 0
Jul 26 05:34:51 localhost Unknown[329]: /SourceCache/AppleFSCompression/AppleFSCompression-37/Common/StreamCompressor.c :928: Error: returning errno 22 from FinishStreamCompressorQueue
Jul 26 05:35:33 localhost OSInstaller[344]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “Essentials.pkg”." UserInfo=0x7f83610395f0 {NSLocalizedDescription=An error occurred while extracting files from the package “Essentials.pkg”., NSFilePath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, NSURL=Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg, PKInstallPackageIdentifier=com.apple.pkg.Essentials, NSUnderlyingError=0x7f8360d42420 "The operation couldn’t be completed. FinishStreamCompressorQueue error"} {
         NSFilePath = "/Volumes/i7Mac/.OSInstallSandbox-tmp/Root";
         NSLocalizedDescription = "An error occurred while extracting files from the package \U201cEssentials.pkg\U201d.";
         NSURL = "Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg";
         NSUnderlyingError = "Error Domain=BOMCopierFatalError Code=1 \"The operation couldn\U2019t be completed. FinishStreamCompressorQueue error\" UserInfo=0x7f8360d47220 {NSLocalizedFailureReason=FinishStreamCompressorQueue error, offset=2847022, type=BOMCopierFatalError, sourcePath=/Volumes/Mac OS X Install DVD/Packages/Essentials.pkg, destinationPath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root}";
         PKInstallPackageIdentifier = "com.apple.pkg.Essentials";
Jul 26 05:35:33 localhost OSInstaller[344]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "An error occurred while extracting files from the package “Essentials.pkg”." UserInfo=0x7f83610395f0 {NSLocalizedDescription=An error occurred while extracting files from the package “Essentials.pkg”., NSFilePath=/Volumes/i7Mac/.OSInstallSandbox-tmp/Root, NSURL=Essentials.pkg -- file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/Packages/OSInstall.mpkg, PKInstallPackageIdentifier=com.apple.pkg.Essentials, NSUnderlyingError=0x7f8360d42420 "The operation couldn’t be completed. FinishStreamCompressorQueue error"}
Jul 26 05:35:34 localhost OSInstaller[344]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
If I boot to the "Recovery HD" I get a message "Installation Failed, Try re-intalling" Which would be a fine idea, but I can't because if I re-start installation from the hard drive I get the above errors.
I've burned the "InstallESD.img" to a DVD, but it also doesn't seem to work. Comes up as though I'm in the Reco

Jen,
Here's what I did to get Lion installed:
Burn the installer to a DVD and install from there. It worked for me. Here's what you need to do:
First you need another computer running at least 10.6.8.
1. On the other computer go to 'App Store' (make sure you're logged in to the App Store with the AppleID you used on the troubled computer)
2. Click on 'Purchased' in the 'App Store' window's toolbar
3. If you are on 10.6.8, and haven't downloaded Lion on that computer just click "Install" to download the installation application.
3. a, if the other computer is already running Lion, you'll need to re-download the installer.
3. b. Hold down 'Option' when selecting 'Purchased' then you click "Install"
4. When the Lion Installer starts up, just quit it. You want to work with the Installer application.
5. Find the "Install Lion OS X" application in the 'Applications' folder.
6. Hold down 'Control' and click on the application and select 'Show Package Contents'
7. Find 'InstallESD.dmg' which is in the "Shared Support" folder and copy it to your desktop.
8. Burn 'InstallESD.dmg' to a DVD ('Disk Utility' is simplest to do this).
9. Put the new install DVD into the computer that has Lion partially installed and reboot holding down the "C" key.
10. run the installer as normal, selecting your harddrive as the target.
In my case, when it rebooted to the harddisk the Lion installer started AGAIN. If this happens, let it run. Then you should be done.
Hope this helps.

After downloading and installing PS CC2014 i wanted start the application but got a message "Impossible d'initialiser Photoshop en raison d'une erreur du programme", in english sth like unable to initiate PS due to a programe error. I did an uninstall and

After downloading and installing PS CC2014 i wanted start the application but got a message "Impossible d'initialiser Photoshop en raison d'une erreur du programme", in english sth like unable to initiate PS due to a programe error. I did an uninstall and a new download, but the problem's always there

Try this: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

When installing iTunes the installer tries to put it in the wrong drive

When installing iTunes the installer tries to put iTunes in a network drive instead of the "C" drive.

Yes, I thought it would do that too, but it keeps coming back with a drive error for a network drive that I am not connected to and don't want it there.

INSTALL ARCHLINUX (new installation system by Arch Install Script)

After many failed installations, I've resolved and written a mini-guide how to do an easy installation of Arch Linux. I've added it to Manualinux on point 44b.
However, I report it below, maybe could be useful to someone:
44b)INSTALL ARCHLINUX (new installation system by Arch Install Scripts)
Choice if install ArchLinux 32 or 64 bit, following type these commands:
-loadkeys it (choice your language)
-Use cfdisk to create your partitions
cfdisk /dev/sda o /dev/sdx
-Format Partitions Using mkfs and Create Swap
mkfs.reiserfs /dev/sda1
or
mkfs.ext4 /dev/sda1
mkswap /dev/sda2
-Reboot system with installation cd
reboot
-Mount Partition:
cd /
mount /dev/sda1 /mnt
-Make and mount swap partition:
swapon /dev/sda2
-Active wireless or ethernet connection
wifi-menu (choice your wireless connection, I suggest your to disable temporarely your password on router-modem)
dhcpcd (attach ethernet wire)
-Install Base System:
pacstrap /mnt base base-devel
-Install Grub2:
pacstrap /mnt grub-bios
-Install Syslinux:
pacstrap /mnt syslinux
-Generate fstab:
genfstab -p /mnt >> /mnt/etc/fstab
-Login to arch-chroot:
arch-chroot /mnt
-Install package wifi-select
ip link set wlan0 up
pacman -S wifi-select
-Configure Network:
vi /etc/rc.conf
add interface="eth0"
add interface="wlan0"
-Edit Hostname:
vi /etc/hostname
and add desired hostname
-Set Timezone:
ln -s /usr/share/zoneinfo/Europe/Rome /etc/localtime
-Generate Locale:
vi /etc/locale.gen
enable:
it_IT.UTF-8 UTF-8
it_IT ISO-8859-1
it_IT@euro ISO-8859-15
-Execute locale-gen on shell:
locale-gen
-Configure Kernel:
mkinitcpio -p linux
-Configure Bootloader:
grub-mkconfig -o /boot/grub/grub.cfg
grub-install --recheck /dev/sda
-Set root password:
passwd root
-Exit from arch-chroot:
exit
-Unmount Partition:
umount /mnt
-Reboot your system
reboot
-If ethernet wire is attached:
dhcpcd
-If you want configure wireless network:
ip link set wlan0 up
wifi-select (if you have not password on router-modem)
pacman -Syu kde wicd wicd-gtk (insert kdm wicd in /etc/rc.conf)
reboot system and configure your router wireless/wifi connection
Reinsert wireless password on your router/modem
Last edited by Pantera (2012-09-17 20:14:31)

You don't need to install both grub and syslinux. You configure grub in "Configure Bootloader" so this step is unnecessary:
-Install Syslinux:
pacstrap /mnt syslinux
This next step doesn't configure the kernel, it creates an initramfs (see the Beginners' Guide):
-Configure Kernel:
mkinitcpio -p linux
Last edited by 2ManyDogs (2012-09-17 20:28:58)

After installing Firefox again, I wanted to get back my settings, bookmarks etc. by syncronising with Firefox Sync but accidentaly settings from a fresh browser

After formatting the partition and installing Firefox again, I wanted to get my settings, bookmarks etc. back by syncronising with Firefox Sync but accidentaly settings from a fresh browser was uploaded and now I cannot have the browser the way I used to have. Is there any way to reverse this changes?

Hi zoomy,
First check that you still have data in your sync account.
Firefox button > Options > Sync > Manage Account
It should tell you how much data is stored in the account. Is there any?
If there is still data in the sync account then you can follow the instructions in this article [[What is Firefox Sync?]]. Refer to the 'How much of my data is synced?' section. Change the option to 'Replace all data on this computer with my Sync data'.
I hope that works for you.
If there is no data in your sync account you will be able to get it back by syncing from another computer. Just make sure that the settings on that computer are not replaced by the blank account again. You can use the 'Replace all other devices with this computer's data' option to prevent this.
Please note that Firefox Sync is designed only to sync details between devices not as an online backup tool. If you are formatting a partition it is generally best to backup your profile folder along with any other data. See [[Managing profiles]] for more detail.
--Edward

2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033, error message something similar to bootcamp doesn't support this Win

2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033 (both on the mac/windows partitions (actually using a parallel to run Windows)), error message something similar to bootcamp doesn't support this Windows
So the question is am I doing something wrong? Should I just try and install windows 8 through my windows 7 partition and see if I can use the bootcamp 5.05033. Or do I solely have to use the bootcamp to install Windows 8? I'm not too familiar with bootcamp and how it runs.

if you're using parallels and full bootcamp then you're making it 100% more troublesome for youself then it needs to be
bootcamp is running windows directly on the hardware this give full memory and cpu and 3d video game power
running windows in parallels is running a virtual machine where one can't run powerful games and the like but one can have it in a window and change fast between osx and windows
parallels as the only virutal machine (as far as I know) support not have the operating system as a file on the osx harddisk but can access a bootcamp parition as virtual machine but without the benefits bootcamps provides
it's a service parallels provide for those who want both to play games in normal bootcamp and sometimes use windows in a virutal machine
just install it like a normal virtual machine and you need not worry about bootcamp drivers and the likes
plus it would mean that the windows part would be a part of the timemachine bacup of osx
which it is not when it's in bootcamp

I have a mac computer. I am trying to install flash player but get the message "install adobe flash player wants to make changes. Type your password to allow this." I do not use a password to open the computer.

I have a mac computer that uses no password. When installing flash player I get the message "Install adobe flash player wants to make changes Type your password to allow this. I can't get past this message.

Hi,
To change your password you will need to open System Preferences, then open Users & Groups, click on Change Password. Change your password to a temporary one, then when you have finished you do the same procedure to change it back, by typing in the temp password then leaving the new password blank. Hope this helps.

I purchased and downloaded Acrobat Pro XI and have installed it. I want to create a reinstall disk should I ever need it. I planned on using a DVD. I'm running Win 7 Pro w/SP1.

I purchased and downloaded Acrobat Pro XI and have installed it. I want to create a reinstall disk should I ever need it. I planned on using a DVD. I'm running Win 7 Pro w/SP1.

Hi halb10567672,
You can download the setup file again from this Link (Download Acrobat products | Standard, Pro | XI, X ) and Burn it to a DVD Disc using Windows Explorer.
Please revert back for any further query or assistance.
Regards,
Rahul

I have a new-in-box version of Audition 3.0 that I purchased about 6 years ago; for a variety of reasons it's been sitting on the shelf all that time. I now need to install it; It installs fine on my system but I can't get it to activate. I'm trying to us

I have a new-in-box version of Audition 3.0 that I purchased about 6 years ago; for a variety of reasons it's been sitting on the shelf all that time. I now need to install it; It installs fine on my system (Win XP) but I can't get it to activate. I'm trying to use phone activation because the machine I will be using is not net-connected. How can I activate this s/w?

You won't be able to. You will need to acquire a special copy. See the following:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Hi, Im trying to install the CC installer on my new MacPro. When the installer loads it says there's a "Download Error" and can't get beyond that. Everything work fine on my old Mac. Any Ideas?

Im trying to install the CC installer on my new MacPro. When the installer loads it says there's a "Download Error" and can't get beyond that. Everything work fine on my old Mac. Any Ideas?

Chasel please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve download errors.

When i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

when i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

Hi Kashmore,
Seems like the downloaded file was corrupt that could be because of either network restriction or the anti virus might have blocked it. My suggestion would be to try and download the product either by turning off the Antivirus or try a different network.
Cheers,
Kartikay Sharma

Trying to download the free trial of Adobe Acrobat XL Pro. I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I've repeatedly tried g

Trying to download the free trial of Adobe Acrobat XL Pro. I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I've repeatedly tried getting a new installer file, but get the same message every time.

K_don52 and Ande8135 please remove your current installation of the Adobe Download Assistant and reinstall. You can find more details in the known issues section of Troubleshoot Adobe Download Assistant.

Install 5.7 installer wants 5.3

Similar Messages

Maybe you are looking for