Install 8.0.2 or wait?

Planning to install iOS 8.0.2 (7.1.2 right now) on iPhone 5 very very soon. What issues if any can be expected? Thanks.

Before installing you may want to download the IOS 8 manual - available for IPhone Ipad Ipod
so rare to find it in download - printable format - Apple must have expected issues --
go over all settings including any auto refresh settings before you update.
http://support.apple.com/manuals

Similar Messages

Can't see my installed app but only a waiting Icon

I tried to install Page on my iphone, but then because its size is over 20M, so my iphone paused it, then I installed Pages via Itunes, I can see boh the installed Pages icon and the waiting Pages from itunes, but on my iphone, only the waiting icon is there, and I tried many ways to delete the icon, reboot, enter air plane mode and etc, the waiting Page is still there, and I cant see the installed Page. anyone have the same issue?

Hi guys,
I personally figured it out on why this problem occur, well let me just hit to the point.
What happens is that the router of the wifi channel is being changed automatically or someone might accidentally changed it. MBP can't detect wifi from certain wireless channel. So, we have to change the channel of the router wifi channel that may be detectable by your MBP.
THE SOLUTION -
1. Connect to the wifi from a active device to the router wifi that your MB can't detect or use Ethernet cable to get connected.
2.Once connected, access to the router wifi menu by entering the ip address on your net browser, eg:192.168.2.1
3.Then go to wifi setup or menu, and you may come across the wireless channel.
4.Switch the channel from any numeric to numeric that the router wifi can make your MB detect it.
eg: Wireless Channel - 6 (change it to -->) Wireless Channel - 11
5.Save the settings for the router wifi, exit, restart your MB and HAVE FUN!

Silent install for patch release 3 waiting for carriage return

I'm trying to get Patch Release 3 (to take my 10.2.0.1.0 installtion to 10.2.0.4.0 on Linux RHEL 5/x64) to install using a ResponseFile so it can be scriptable.
The actual silent install works fine - the problem lies with the patch install - it waits for the carriage return to be pressed oce it has been installed. And since its waiting for the Return key to be pressed, the script hangs.
The command I'm running is
+/oracle/staging/10g/patch/Disk1/runInstaller -ignoreSysPrereqs -silent -responseFile /oracle/staging/10g/patch.rsp << EOF+
EOF
I'm not even sure where to start looking to solve this issue.
Can anyone point me in the right direction please...

Hi;
Did you follow patch 8.2 Installing the Oracle Database 10g Patch Set Noninteractively part?
Also see:
ERROR:Oracle 10.2.0.4 Patch Set Return Exit Code -1073741819 [ID 779582.1]
OUI reports a successful silent install when errors are present [ID 793510.1]
Regard
Helios

My ipad2 won't let me install apps , when I trie to install an app it says waiting but there is no loading circle on the top of my screen , please help ! ?

I tried to install the new update for minecraft pocket edition then all of a sudden it won't load ! It said "waiting" for almost an hour ! Nothing will load :( , then I tried to delete the app and re- install it , still the same problem :( . I turned my iPad off and on then restarted it still no hope ! . I thought it was just the app so I tried installing another 1 but it had the same problem . I was going to reboot it but that would mean loosing my stuff so I tried to back it up using iCloud but when I tapped "back up now " it won't load either !! Please help , I'll appreciate it loads thanks you !!

Rebooting will not make you lose any content. Rebooting is when you hold the home button and the sleep button down at the same time until the Apple logo appears on the screen.
You can these suggestions. One might work for you.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.

Install Windows 7 now or wait for Snow Leopard (bootcamp 3?)

What should I do? I just received my RTM copy of Win7 and I'm debating whether or not I should wait for the Snow Leopard release to install it.
I wonder if it will be better supported with bootcamp 3. Any (quick) advice would be greatly appreciated. Thanks!

I definitely agree with Hatter, it was the easiest installation with Bootcamp I've experienced with a Windows OS and I'm currently running Leopard.

Should I install my Leopard now or wait a few more weeks for an update

Realizing that no one posts to these boards UNLESS they have a problem, I still am wondering if it is smart to wait a few weeks for an update or two. What do the experienced folks here think?
I am running my back up as I write so will be ready to go as soon as it completes if I decide to go ahead now rather than later.
And as a second question do the experienced folks recommend doing an upgrade or an archive and install - I'm thinking that an archive and install is the best but there seems to be some question among users here.
Larry Nebel
Message was edited by: LarryHN
Message was edited by: LarryHN

+"carbon copy cloner ... I assume it is pretty self explanatory."+
CCC is what I use and yes, its "pretty self explanatory" and pretty easy too. Don't forget to make sure you use the correct partition type, GUID for intel Macs and Mac OS for PPS Macs. This should be done before making the clone. Also, "verify" the clone by booting it before you do anything else.
+"...am a bit weary of my lack of knowledge and experience..."+
Don't let that stop you. You can't really screw anything up since the whole thing is happening on a backup drive. The whole point of this is to keep your current system safe and intact until you choose otherwise. "Knowledge and experience" is just a simple way of saying that you have made more mistakes than the next guy. That's how you get the knowledge and experience in the first place!

Install iLife 06 now, or wait for my RAM?

I just bought iLIfe 06 and would like to install it onto my Mac right away, but I also just ordered 1 GB of RAM which could take up to 14 days to get here.
I really want to play around with iLife and try out all its fun new features (i'm upgrading from iPhoto 2 and iMovie 3, i don't think these apps were part of iLife back when I got my PB 3 years ago).
Can I install iLife right now (I am running with 384 mb RAM), or do I have to wait until I install my GB of RAM. I know it will run better with the RAM upgrade, but I just want to know if I have to wait to install it until my RAM comes. THANKS for your help!

Memtest is a very thorough memory tester, I'm not surprised it is taking quite a bit longer to test. I like to use the program rember, which wraps a nice graphical interface around the memtest program. Last time I used it, I fired up the test and let it run overnight. With rember (and I would assume native memtest), you can choose verbose logging, so you can watch the results as it tests the memory, or if you put it on multiple iterations overnight, you can read the test log in the morning.
You also have a memory test in your Apple hardware test program. Insert the OS X DVD that came with your system (it will say AHT Version x.x in small print on the DVD), reboot holding the option key down, choose Apple hardware test, and follow directions. When testing memory, choose the extended test.

TS1702 Can't install any application always show waiting. Never moves up to install

I am trang to install applications to my new iPad , but it doesn't work. It always shows "waiting " anyone ever face this problem. Pls advise me

Check iTunes and see if you have a pending/stalled download e.g. Podcast, Music or Movies. Finish off the download and apps should start downloading.
If there are no pending or stalled downloads, sign-out of account, reboot and sign-in again.

InDesign CS6 won't package fonts or package anything after installing OSx mavericks - Client is waiting

Pre-Mavericks I had zero problems packaging my INDD files in Adobe InDesign CS6 with all fonts and links intact. Now, when I go to package the same files I successfully packaged last year under Lion, InDesign tells me the fonts can't be packaged (and doesn't package anything else either). My client is becoming very frustrated so I would really appreciate some help from Adobe in solving this problem as soon as possible.

Thank you Willi for responding.
Which fonts are affected? - I'm assuming all of the fonts are affected since no fonts are able to be packaged.
Are all used fonts installed? - Yes
Did you have your fonts in a Document Fonts folder beside your old file and saved your new document on a different place? - Before I upgraded to Mavericks I was able to package everything for this exact same file so I do have fonts in the packaged folder (referring to my 2013 file) so even though the fonts aren't in a Documents folder (they are inside the package "Fonts" folder) so I think the answer to your question is yes.
Does your font folder have the same permession as the folder before? - I believe so because I never changed the permissions for the fonts
Do you use CS6 as part of the Creative Cloud and are you using TypeKit fonts? Or are you using the boxed version? - I am trying to avoid using Creative Cloud since I already have CS6 that I have already paid for. What I am reading on the internet, however, is that Adobe is forcing people to move over to CC when they upgrade to Mavericks due to problems like I am having now. I am not sure if this is true/untrue but I am definitely concerned. I can not afford right now to start paying a monthly fee (especially after I have already paid for CS6). I am using a boxed version of CS6 and I am not using TypeKit fonts.

Disk Utility Issues Wait to Install Leopard

Dear fellow Mac users,
Rather than a question, this is a recommendation to those who are wondering whether to install Leopard now or to wait until it gets really stable.
My experience in installing Leopard has not been positive and I chose to revert to Tiger. After discovering several issues and going to the "Genius Bar" of the local Apple Store, I fortunately have been able to restore all my previous settings.
The loss has been mostly time and money, and they frightened me up suggesting that I had to change my hard drive. For those who might experience similar problems, let me provide some details.
1. Installation of Leopard
After carefully making a bootable backup of my HD on an external drive, I installed Leopard choosing the Option "Erase and install." This occurred without visible glitch. After updating the system to its latest version, I migrated all my data and settings. The result was an incredibly slow system, completely useless. It cannot have been the results of my settings, because I also created a "clean" account called "Maintenance," with the same results. On the recommendation of the "Apple Genius" I also added 1 GB of memory, getting a total of 1.5 GB of RAM installed to the cost of $150. It did NOT improve the situation.
2. Disk Utility
Because I suspected problems with privileges, I tried to run the Disk Utility. The result was an endless spinning wheel. After waiting several hours, I had to force quit the application. Tried to run it from the install DVD of Leopard, with the same results. People at the Genius Bar also tried their disk utility after booting from an external drive, without any success. They diagnosed a probable failure of the hard drive and recommended that I replace it. Fortunately, I didn't trust this groundless recommendation and made a last attempt by erasing Leopard and reinstalling Tiger. Now it runs just fine, and there is not the slightest mechanical problem. Apparently, and I only discovered this today, the whole disk check procedure changed with Mac OS 10.5, and at this stage it is a complete mess, with enough bugs in Disk Utility to keep the developers busy for a couple of months. I came across discussions of this on the Mac FixIt Website.
Thus, my recommendation at this stage is that if you have Mac OS 10.4.11 running fine you JUST STICK WITH IT and be patient for a few more months. Upgrading at this stage amounts to loosing time, energy, and money. Of course, I am sure that Mac OS 10.5 has many promising features and look forward to using it in the future, but not now. I would be happy to hear contradictory opinions, if any.
Best wishes for patience.

Nerowolfe,
I have installed Leopard and have had nothing but problems as well. Perhaps you can help me. I am ready to roll back to Tiger. These are just a few:
1. I cannot mount my external firewire drives. I have separately tested each and they work fine, I booted with the Tiger disk and they mounted fine, I reset the firewire port and when I connected them they mounted on my desktop, but not in the finder window and when I tried to open one, it just hung. I have been unsuccessful after many attempts to mount one of them with Leopard.
2. I appear to get random hangs. I have a 160GB hard drive and 2GB memory. I have 42 GB space left on the hard drive....yet I continue to have random hangs, especially when I try to open disk utility
3. Spotlight just does not work, period
4. I keep finding locked folders. Right now my CS3 is locked and even after going into get info and unlocking it, it just locks back and I am unable to open the application. I am a photographer and have been unable to do any work for the past 2 weeks while I am messing around with my computer. Now I have Christmas photos to sort and can't access the photos on the external drives or even open CS3
I have searched the forums, tried many of the recommendations, but nothing is working for me....perhaps since you have been successful you could give me a hand with these issues.
I wait for help.......
Other than that, how do I uninstall Leopard and reinstall Tiger????

HT202159 An error occurred in the App Store. Try again later(13)..I wait for months!!! please help me! Can't download or update, install and buy! iMac 2008, OS X Lion 10.7.4 (11E53).

An error occurred in the App Store. Try again later(13)
Can't download or update, install and buy!
I wait for months!!! please help me!
<Email Edited by Host>

Disable anti virus software.
Turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall
If that doesn't help, open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
~/Library/Caches/com.apple.appstore/Cache.db
Click Go
Move the Cache.db file to the Trash.
Now here:
~/Library/Preferences
Click Go
Move these files from the Preferences folder to the Trash.
com.apple.appstore.plist
com.apple.storeagent.pllist
Now here:
~/Library/Cookies
Click Go
Move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Empty the Trash, try the App Store.

TS1702 I had updates for some apps I already had ,but the updates started installing ,and they have been in the waiting mode now for about a week. What do I do ?

I had some updates for several apps ,when I installed them they went to waiting ,and ,have been that way for about a week,What do I do now ?

If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

TS1702 I deleted the kindle app as it had frozen but it won't re-install it just says it's waiting what can I do???g to re-install and nothing happens - wha

I had kindle on my ipad 3 but it froze the other day and I couldn't turn pages or go to home page so I deleted it from the i pad - I've followed the instructions and I've been on to Amazon but the app won't re- install - it says it's waiting to install but nothing happens can anyone help with what I should do - thanks

Can any one help, any one? Please.

TS1717 I ordered wheel of fortune and it said it was installing it however It was not install completely on the iPad . The icon says waiting . It will not finished loading

I ordered wheel of fortune app and it started to install. It did not install and is staying on waiting mode. If I click on it ... Pause. Is the result. I have three other attempts to install other aps. All have the same lack of response. I don't know whether the payment went through or not but all of them remain frozen and I'm installed. I tried calling support to no avail. What o do ?

Rebooting will not make you lose any content. Rebooting is when you hold the home button and the sleep button down at the same time until the Apple logo appears on the screen.
You can these suggestions. One might work for you.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.

.ipa file will install in iTunes and copy to iPhone or iPad but shows as greyed out with "installing" or "waiting" underneath.

Hey All:
I have an .ipa file that is legit and "signed" (at least I think so) but for some reason will not work on any device. I basically drag the .ipa file into itunes app section and it will show there as a working app.
I select the button that says "install" so that when it syncs it puts it on my ipad or iphone. Once I move over to the iphone or ipad the icon is greyed out with the words waiting or installing under the icon.
Waiting for a half a day at one point before I finally gave up and deleted it from my devices.
Can someone point me in a direction as to what I might be doing wrong? The only thing I can think is that its' not io7.1 compatable but that is all I got.
Thanks
Paul

I am assuming you where generating the .ipa file using a UniversalDistribution Provisioning Profile with an iOS Developer Enterprise Account. If so I had the same problem - turned out it was a Certificate issue - what worked for me was when creating the Certificate which I did manually using Keychain Access I left the Common Name field blank and the .ipa installed properly on my devices. Hope this helps.

Install 8.0.2 or wait?

Similar Messages

Maybe you are looking for