INSTALL 9i ON WINDOWS SERVER 2003

Hi
I went to this url (http://www.oracle.com/technology/software/products/oracle9i/index.html) as usual to download the correct version of Oracle for my Windows 2003 server.
I see that you have version for xp/nt/2000 and windows2003 server.
But when i choose the version for windows203 server, i have not the good files, it's a patch to go on 9.2.0.3.
So is it because there is no special version for Windows2003 and i can take the cp/nt/2000 version or just because there is a problem with the link ?
Thanks in advance

Hi,
On Windows 2003 server you should first install Oracle 9i R2 9.2.0.1.0 then install Oracle 9.2.0.3 patch so your oracle version will be certified on windows 2003.
Without this patch Oracle 9i R2 can be installed, but will not be certified, and you may encounter some problems on functionalities.
Install 9i R2 and apply 9.2.0.3 patch.
Tony Garabedian

Similar Messages

HT203175 How do I install iTunes on Windows Server 2003?!? I get an error every time!!

I am having trouble installing any version of ITunes 10.5 or later
on my Windows 2003 Server PC. I receive the following error
every time I try to install it...
"Apple Mobile Device Support requires that your computer is running Windows XP SP2 or newer"
I anyone has had this same problem I would appreciate any help!!!
Thank you!!!

I've googled my problem with many hits stating Itunes can indeed be installed
by making changes to the msi packages and I believe a few
registry hacks. It sounds like it can be done, but before experimenting with
those suggestions I thought looking to the Apple community on the official site
might glean a better remedy.
I'm just surprised Apple doesn't support any Windows Server applications
even though Windows Server 2003 came out after Windows XP,
(Server 2003 - 2003____XP - 2001)

Error installing 10g on Windows Server 2003

I am trying to install Oracle 10g on a Windows Server 2003 box. I'm following the instructions listed here: http://www.oracle.com/technology/obe/10gr2_db_single/install/wininst/wininst_otn.htm
Everything seems to go fine up until step 8. My Oracle Net Configuration Assistant fails. I get an error dialog titled "java.exe - Entry Point Not Found" the error message is "The procedure entry point longjmp could not be located in the dynnamik link library orauts.dll."
Does anyone have an idea what's wrong here?
Thanks,

The OUI 10.2.0.1 of the base release software distribution was used to install the new
component from the base release on top of the 10.2.0.2 Oracle Home.
The OUI 10.2.0.1 is not compatible with the 10.2.0.2 orauts.dll installed under the Oracle Home. OUI 10.2.0.1 and 10.2.0.2 are using different versions of orauts.dll. The OUI 10.2.0.2 located under %ORACLE_HOME%\oui\bin should be used for installing any new component (from the base release):
1. Run the setup.exe program located under %ORACLE_HOME%\oui\bin
2. Select the "products.xml" from the 10.2.0.1 DVD under database\stage or under the staging area
3. Select the component to be installed
4. After installing the additional component from the base release software distribution,
re-apply the current patchset, e.g. 10.2.0.2
~ Madrid.

Installing Essbase on Windows Server 2003 64bit

Hi,
A few weeks back, I ran into trouble with Essbase on my Windows 7 64 bit machine. Somone suggested I try installing on Windows Server 2003 which I am trying to do. Is there a reason why nothing happens when I double click the Installtool.cmd icon on Server 2003? Its the same installation files as the one I installed on Windows 7?
Much appreciated.
Sam

Hi John,
I've got Service Pack 2 installed and I am pretty sure I extracted all the files correctly because I just copied over the folder. A command window does open but no error message is displayed. Could the location have anything to do with it because I once had the same issue when I placed the installation folder in MyDocuments and when I moved it to the C drive it fixed the problem. Only problem this time is it doesn't work.
Sam
Edited by: user10048105 on 18/05/2011 01:13

I think I may have discovered the solution to installing CFMX7 on Windows Server 2003 SP1

I have not tried to reproduce this method so it may not be a
solution, but it worked for me. After many hours of trying to get
CFMX7 to install on a new server with a fresh install of Windows
Server 2003 with SP1, I stumbled across this and it actually
worked. Using the coldfusion-702-win.exe installer, I right clicked
on the .exe and even though I was logged in as an administrator I
received the option to Run as, so I decided to give it a shot. I
chose the option to run as Current User, but I unchecked the box
'Run this program with restricted access'. After I did this, the
install went through error free.

I have not tried to reproduce this method so it may not be a
solution, but it worked for me. After many hours of trying to get
CFMX7 to install on a new server with a fresh install of Windows
Server 2003 with SP1, I stumbled across this and it actually
worked. Using the coldfusion-702-win.exe installer, I right clicked
on the .exe and even though I was logged in as an administrator I
received the option to Run as, so I decided to give it a shot. I
chose the option to run as Current User, but I unchecked the box
'Run this program with restricted access'. After I did this, the
install went through error free.

Install fails on Windows Server 2003

Windows Server 2003 SP2
Installation disappears after the copying step is completed and then the "*Publishing Product Information*" step begins
In the log file, after the following line, the copied files are deleted and the registry entries are removed.
InstallFinalize. Return value 2.
Anybody have an idea how to get around this? We tried granting the "Impersonate a Client After Authentication" privilege to the Local user in the Administrators group doing the installation, to no avail.

After the user logged off and then back on the "Impersonate" privileges took effect and the install completed successfully.

Quicktime 7.1 won't install with MS06-015 on Windows Server 2003

Quicktime 7.1 will not install correctly on Windows Server 2003 with MS06-015 - Vulnerability in Windows Explorer Could Allow Remote Code Execution installed.
We have tried this on at least 6 machines. All fail at the last step in the install process with the following error:
"Unhandled Exception:
Error Number: 0x80040707
Description: DLL function call crashed: QTInstallCode.QuickTimePostInstallProc
Setup will now terminate"
This leaves Quicktime (and iTunes if installed) broken.
Removing MS06-015 allows Quicktime 7.1 to be installed but leaves the gaping holes fixed by MS06-015 wide open - not a good place to be.
It's more than likely that this is caused by Quicktime 7.1 being blocked by Verclsid.exe which is installed by MS06-015. See this Knowledge base article - You may experience problems in Windows Explorer or in the Windows shell after you install security update MS06-015 for more information.
Can anyone else please confirm this or better still can this please be fixed?
Cheers,
Sim

G'day Sam
First I gonna tell you don't try this at work Server...
I had try this on Windows Server 2003 Standard Edition and it work fine/___sbsstatic___/migration-images/migration-img-not-avail.png/___sbsstatic_ __/migration-images/migration-img-not-avail.png
After I had been test and test..... Look like QT-7.1 doesn't like(Shell32.dll Ver. 6.00.3790.2662).
There is way to fix this problem.
1. Send me an email, I will send you back (Shell32.dll Ver.6.0.3790.2534)<< This version working with QT-7.1 after I uninstall all the HotFix Update that relate to Shell32.dll.
How to replace this dll file
Don't use Search to find this file.
Click into C:\ and type in the Address bar C:\windows\system32\ then find the current Shell32.dll > Rename it to some thing else, just incase if it not working for you, so you still have the orignal file.
Then copy the file I send you to the System32 folder.
Restart you PC and try to install again....
Good Luck
Let me know if it not working...
Cheer...

Error installing Oracle SOA Suite on Windows Server 2003

Hi
I have installed SOA Suite 10.1.3.1 on WIndows XP with no problems. I'm trying to install it on Windows Server 2003 and in the Oracle Web Service Configuration Assistant I get:
Output generated from configuration assistant "Oracle Web Services Inspection Language Configuration Assistant":
Files\Java\j2re1.4.2_06\lib\ext\QTJava.zip""=="" was unexpected at this time.
Configuration assistant "Oracle Web Services Inspection Language Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Web Services Inspection Language Configuration Assistant" (attempt 2):
Files\Java\j2re1.4.2_06\lib\ext\QTJava.zip""=="" was unexpected at this time.
Configuration assistant "Oracle Web Services Inspection Language Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Web Services Inspection Language Configuration Assistant" (attempt 3):
Files\Java\j2re1.4.2_06\lib\ext\QTJava.zip""=="" was unexpected at this time.
Configuration assistant "Oracle Web Services Inspection Language Configuration Assistant" failed

Hi All,
I am facing the following exception while installing SOA suite.I am trying in XP env and from that machine i reacently de install the BPEL Installer and Oracle Since i am facing followuing exceptions.
Pleas give me some suggenstion how to resolve the issue
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x3133784
Function=Java_sun_awt_font_NativeFontWrapper_registerFonts+0x14C0
Library=C:\Documents and Settings\Murali\Local Settings\Temp\OraInstall2007-04-06_06-23-04PM\jre\1.4.2\bin\fontmanager.dll
Current Java thread:
at sun.awt.font.NativeFontWrapper.registerFonts(Native Method)
- locked <0x162d7d30> (a java.lang.Class)
at sun.java2d.SunGraphicsEnvironment.addPathFonts(Unknown Source)
at sun.java2d.SunGraphicsEnvironment.registerFonts(Unknown Source)
at sun.java2d.SunGraphicsEnvironment.access$200(Unknown Source)
at sun.java2d.SunGraphicsEnvironment$2.run(Unknown Source)
at java.security.AccessController.doPrivileged (Native Method)
at sun.java2d.SunGraphicsEnvironment.loadFonts(Unknown Source)
- locked <0x107b8fe8> (a sun.awt.Win32GraphicsEnvironment)
at sun.java2d.SunGraphicsEnvironment.mapFontName(Unknown Source)
at java.awt.Font.initializeFont(Unknown Source)
at java.awt.Font.<init>(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.<clinit>(Unknown Source)
at oracle.ewt.laf.oracle.OracleLookAndFeel._initCommonFixedDefaults (Unknown Source)
at oracle.ewt.laf.oracle.OracleLookAndFeel._getCommonDefaults(Unknown Source)
at oracle.ewt.laf.oracle.OracleLookAndFeel._getIndexedDefaults(Unknown Source)
at oracle.ewt.laf.oracle.OracleLookAndFeel.getDefaults (Unknown Source)
Thanjks in Avance,
Murali
[email protected]

Windows Server 2003 and Microsoft Assessment and Planning tool (MAP)

Preparing for the end of support for Windows Server 2003 (4/2015) and the need to migrate from Windows Server 2003, I have been directed on several sites run the Microsoft Assessment
and Planning tool (MAP) to aid in identifying any software and hardware issues. Apparently this tool has been recently updated (7/2014) and cannot be installed on a Windows Server 2003 system. As it requires .NET Framework 4.5 to run. Unfortunately,
.NET Framework 4.5 cannot be installed on a Windows Server 2003 as it only supports .NET 4.0.x versions. All older version links to the MAP tool have been updated to link directly to version 9.1. Where can I get a MAP tool version that will run
on Windows Server 2003?

Hi,
Yes, i would agree with arnavsharma
After the environment scan has been completed in Windows Server 2008r2 or another supported OS, MAP looks at computers running earlier versions of Windows.
http://technet.microsoft.com/en-us/magazine/ee677580.aspx
Meanwhile, for the MAP related issue, you'd better ask in MAP forums:
https://social.technet.microsoft.com/Forums/en-US/home?forum=map
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Acrobat 9 pro support windows server 2003 32bit?

in the acrobat 9 pro readme file,I see the system requiement:
Windows Server® 2003 (with Service Pack 2 for 64-bit);
my question is that does acrobat 9 pro support windows server 2003 32 bit?
I have install it at windows server 2003 32bit,
but when i open it, a message box
"Licensing for this product has stopped working"
i have try the solution in kb405970, and can not resolve it.
so manybe really it doesn't support windows server 2003 32 bit?

John makes some very good points but I would like to clarify one thing from his post: you are planning three migrations:
1. From 32bit -> 64bit
2. From Windows to Linux
3. From Oracle 10gR2 to 11gR2
The second of these is the one most liekly to give you grief. You certainly should not attempt to combine it with a database upgrade. Either move the database to RHEL and then upgrade it, or upgrade it on Windows and then move it to the new server.
Of these, the first is the least controversial. So it's a nice point whether it is worth upgrading from Windows 32bit to Windows 64bit prior to moving to Linux.
Cheers, APC

MSI TV Card doesn't work in Windows Server 2003 !!!

Hi All,
I have bought a MSI TV Tuner (TV @nywhere series)
I Installed it on Windows XP and it works properly.
But I Installed it on Windows Server 2003 and noticed that it's not working at all !
It's TV Tuner , however, doesn't work good (It has a weak receiving power). I'm using it as a Radio (MSI Radio). But even the Radio is not working under Windows Server 2003.
I want to know what's the problem ? What Driver should I use ?
I have Installed the same driver in Windows 2003, Because there isn't any Windows 2003-specific driver included in the CD-ROM of this package.
Please guide me what should I do. I need Windows Server 2003 to be my OS. I want to know if this TV Tuner isn't supposed to work on Windows 2003 Server ? It's only desingated for Windows XP and prior ? What's the solution ?

Quote from: sma_soft on 27-August-06, 14:34:43
Hi
what a pitty !
You are a known company and you DON'T KNOW !! if your hardward can work in Windows Server 2003 or not (:|
Or maybe you don't assume Windows Server 2003 as an Operating System !
Also I checked the TV Tuner Driver Pages in your site, but I found that you don't have ANY driver for Windows Server 2003
It's exactly the driver I have on MSI CD-ROM. As you can see above, it's telling There's no support for Win2003 !!!
Your System OS Win9X/ME/2000/XP(22710KB)
Now you see ? Even in the manufactory you haven't tested and it was not important for this comany if their hardware can or cannot work on Win2003.
Maybe you have designed it especially for Windows XP and prior.
I JUST WANT TO KNOW THIS !!!
bye
OT:
@sma_soft,
Hi sma_soft! As the title of this site says: "MSI HQ User to User Forum". As I understand, we are all the same here. That we are all MSI product users and customers in this forums.
Read the article below that I got from here for you to be able to understand what I meant. You will see this article on the upper portion of every page of this forum. Just scroll upward.
"News: For your information, the MSI Forum Team is not paid by MSI.
The entire forum is run by volunteers that like yourself, enjoy MSI's products.
This forum is independent and not regulated by MSI, but the MSI Forum Team will try to assist you with any problems you have with MSI products.
Just remember, there are no MSI employees present here!"

Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

I read the thread Widows 7 printer
HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
attempted to install the driver, I got the same message stating:
"The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
Why aren't there x64 drivers?
During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
Andrew*
P.S. I was advised to come for help here from
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.
I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder.
I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
driver' when installing the HP 855c.
I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
message (probably the same one mentioned above).
; NTPRINT.INF (for Windows Server 2003 family)
; List of supported printers, manufacturers
[Version]
Signature="$Windows NT$"
Provider=%MS%
; LayoutFile=layout.inf
ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
Class=Printer
DriverVer=10/01/2002,5.2.3790.4533
[ClassInstall32.NT]
AddReg=printer_class_addreg
[printer_class_addreg]
HKR,,,,%PrinterClassName%
HKR,,Icon,,"-4"
HKR,,Installer32,,"ntprint.dll,ClassInstall32"
HKR,,NoDisplayClass,,1
HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
Good luck

Error while installing Oracle Apps R12 , on windows server 2003 R2

Hi Experts
While installing Oracle Apps R12 , on windows server 2003 R2, I am getting the following error.
System Utilities
command: cmd.exe /c E:\oracle 12i dump\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
'E:\oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
======================================================================================================================================================================================================================================================================
File Space Check :
-- database node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 0.0
-- apps node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP = E:\apps\VIS\apps\apps_st\appl
required = 5800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = E:\apps\VIS\apps\apps_st\appl
required = 2800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = E:\apps\VIS\apps\apps_st\appl
required = 8400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = E:\apps\VIS\apps\apps_st\appl
required = 3100.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = E:\apps\VIS\apps\apps_st\comn
required = 3200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = E:\apps\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 0.0
waiting for expert suggestion.
Thanks
Rahul Srivastava

Hi Hussein
after changing the directory name as Stage12, I am getting error
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 200473.43359375
Disk space on system acceptable:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 194873.43359375
Disk space on system acceptable:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 174673.43359375
Disk space on system acceptable:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 173723.43359375
Disk space on system acceptable:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 70373.43359375
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = F:\oracle\VIS\apps\apps_st\appl
required = 5800.0
actual = 5873.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = F:\oracle\VIS\apps\apps_st\appl
required = 2800.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = F:\oracle\VIS\apps\apps_st\appl
required = 8400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = F:\oracle\VIS\apps\apps_st\appl
required = 3100.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = F:\oracle\VIS\apps\apps_st\comn
required = 3200.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = F:\oracle\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 73.43359375
also for
System Utilities
command: cmd.exe /c E:\Stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
E:\Stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
which: no cl in (/usr/bin:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/system32)
RW-50011: Error: - System Utilities Availability test has returned an error: 1
Yes I do have sufficient space i.e . for E: 106 GB and F: 195 GB free space .
Thanks
Rahul Srivastava

Blue screen error while trying to install windows server 2003 in Lenovo G500s essentials Notebook

Hi,
I bought a new lenovo G500s essentials note book. It's a freedos system. I am trying to install windows server 2003 in it. But I am getting blue screen error . error message like ths,
Technical Information:
STOP: 0*0000007B (0*FFFFFADF2CE323C0, 0*FFFFFFFFC0000034, 0*0000000000000000, 0*0000000000000000)
Can someone please help.
Regards,
Priya.
Solved!
Go to Solution.

I don't have a similar machine to look at so this is a bit of a guess:
Per page 30 or your user's guide http://download.lenovo.com/consumer/mobiles_pub/lenovo_g400sg400stouchg500sg500stouchg405sg505s_ug_e...:
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1 Shut down the computer.
2 Press the Novo button and then select BIOS Setup
There should be a tab labelled something like "Configuration" and on that page something like "SATA controller mode". Select "compatible" and save and exit.
I'm not certain this will fix your problem, but it's worth a try.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

JRE Error : while Install oracle 10gR2 on Windows Server 2003

Hello,
I am trying to install a Oracle 10gR2 on windows server 2003.
I have unziped the files and when I run the oui.exe it gives the below error:
cannot find any matches for wildcard specification "../stage/components/oracle.swd.jre/1.5.0.0./1/DataFiles/*.jar
Error : JRE missing in Scratch Path
I tried changing the oraparmaini file but it did not allow to make any changes.
Not sure if its looking for any particular java files.
What should i edit ,to specify the java location.
Thanks

What exactly did you unzip? This error occurs if there are several zip-files extracted to different target locations. But - if I remember correctly - 10gR2 database is only one zip-file, so you should not face this issue. JRE for OUI is part of the downloaded software,so you don't need to specify a location for JRE, OUI knows where to find this.
Werner

INSTALL 9i ON WINDOWS SERVER 2003

Similar Messages

Maybe you are looking for