Install a network priunter driver in Windows 7 as a printer is offline or disconnected

Can anyone help me ? How to install a network priunter driver in Windows 7 when the network printer is offline or disconnected?

DP
Your best bet is to contact the printer mfr.  We dont even know what printer you have let alone what the issue is/
Wanikiya and Dyami--Team Zigzag

Similar Messages

  • Unable to install lan realtek rtl8101 and network controller driver on windows server 2008

    Hi Guys,
    i am trying to install realtek rtl 8101 f amily driver and network controller driver on windows server 2008 but unable to install.
    Hp device Model.:- hp pavilion g4 1303au
    Model no.:- 5c03213jsh
    network controller Device ID: PCI\VEN_168C&DEV_0032&SUBSYS_1785103C&REV_01\4&211965BF&0&0020
    Name: PCI Device
    Device ID: PCI\VEN_10EC&DEV_5209&SUBSYS_3564103C&REV_01\4&34BC5A71&0&0030
    Name: SM Bus Controller
    Device ID: PCI\VEN_1022&DEV_780B&SUBSYS_3564103C&REV_13\3&2411E6FE&0&A0
    thanks,
    Amit Rai

    Hi:
    SMBus controller:
    Here is what I have done...I have zipped up and attached below under Attachments, the raw smbus controller driver files for you to unzip and manually install. 
    Download and unzip the file.
    Go to the device manager and click on the smbus controller needing drivers.  Click on the driver tab.  Click on Update Driver.
    Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
    Make sure the Include Subfolders box is checked and the driver should install.  Then reboot.
    Ethernet:  Download and install the 1st driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
    Card reader (PCI dev.):  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
    Wireless:  You will have to try the Vista driver for the Atheros wireless card...
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
    Attachments:
    sp66185.zip ‏7 KB

  • Cannot install HP Photosmart 2610 Driver with windows xp

    cannot install HP Photosmart 2610 Driver with windows xp. keep getting registry error messages part way through the instal.. any suggestions? Thanks

    Hello, 
    Please check if you have an ADMIN rights to log into your PC.
    Else, create an ADMIN user account and then run the installation ,
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • Hp dc 7800 how can i install pci serial port driver on windows 8.1

    hp dc 7800 how can i install  pci serial port driver on windows 8.1  please help
    This question was solved.
    View Solution.

    Hi:
    Download and install the W7 AMT driver.
    http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&sp​...

  • Cannot Install Embarcadero Interbase odbc driver on windows 2012

    Hello 
    I am trying to install Embarcadero Interbase odbc driver on a windows 2012 server. But the installer does not load the file into system 32 folder which should contain the DLL for the 64 bit driver. The 32 bit dll goes correctly into syswow folder and the
    driver works. Even if i try to copy the dll from a windows 7 machine and register it succesfully using elevated permissions .The driver shows up under 64 bit but does not load the database. I feel something is off with the permissions on system 32 folder under
    windows. Any help is appreciated. Thanks.

    Contact the application vendor.  This is not a Windows issue but an application issue.  If they do not support running on 2012, there may be nothing you can do.
    . : | : . : | : . tim

  • Trouble installing latest Intel Display Driver for Windows 7

    Anyone else experiencing issues trying to install the latest Intel Display Driver for Windows 7, version 8.15.10.2057, dated 2 Mar 2010?
    This is the second updated driver release that refuses to install due the following error while running setup.exe: This computer does not meet the minimum requirements for installing the software.
    I've verified compatibility and have disabled Switchable graphics and selected Integrated Graphics in the BIOS
    System: T400, 2764-CTO running Windows 7 (64-bit)
    Thanks...
    T400 2764CTO
    Windows 7 x64

    bwpotter,
    Appears you selected the right .inf file for Win7/64. Notwithstanding the error flags, are you sure the driver did not install?
    For WinXP/32, the equivalent file name is kit22686.inf. In the case of WinXP (likely similar for Vista and Win7), Lenovo's file-set will unpack to C:\drivers\WIN\DISPLAY2. The .inf file that appears in the Device Manager install-routine lives one level down, in C:\drivers\WIN\DISPLAY2\Graphics. Only one .inf file resides in this directory.
    When forcing installation of the driver under WinXP, error messages appear that are similar (but not necessarily identical) to those you encountered. Still, after a sequence of five or six such error messages, the driver does load and can be verified after a reboot. (The new driver has performed to spec for the past several days--no issues whatsoever.)
    The final splash screen in the series reports "Completing the Hardware Update Wizard." (This message does not, however, necessarily denote a successful installation.)
    In the case of WinXP, the errors appear to be generated by the installer, igxpun.exe (v1.2.30.0). Note that the flaky display driver installation should generate an error log. Search for an error log file using the string "*appcompat.txt" (no quotes) and see what it says.
    In the end, the problems with this package can be attributed to simple sloppiness (vendors commonly forget to eat their dog food) and should be quickly fixed if the community barks loudly.
    Hope this helps.
    --BAM

  • Windows 8 CP1025nw Printer stays offline

    I do not know squat about windows 8 other than my opinion of it which is not good. I managed to get the printer installed to print wirelessly, now all of the sudden it's just always offline. 
    I read somewhere to change the IP address to a static one but that post has zero information on how to actually do that. I know the printer is online because when I connect to the network I can print test pages to it, but I can only do that from the print dialogue the printer does not come up in any printer lists.  So If I go to the device webpage it will print from there but only the test pages (I'm sorry if I'm not making sense I'm frustrated and about blind from doing this crap today)
    The driver that installed is for CP1020 not the CP1025nw when I try downloading and installing the full software package it fails every time, doesn't matter if I try to set it up to print to the network, wirelessly or USB, it just fails. I thought maybe the current download package wasn't set up for windows 8 so I also downloaded the drivers alone thinking that might help and again nothing. I've attempted 10 times to install and set it up just today (and it's been more than today that I've messed with it).  
    The printer shows everything is fine, when I run diganostics on the computer everything is fine. But the printer is just showing offline continually.  
    I read somewhere else too that I could reset the print spooler, but on windows 8 I can't even find that.  I am typically great with computers and figuring out issues, and this has honestly left me wanting to rip out my own teeth as I am sure it would be less painful.
    Can anyone help?

    Hi AprilDoyal,
    I understand you are having and issue with  windows 8 and CP1025nw. Printer stays offline can be fixed
    by follow the document below and download the HP Print and Scan Doctor.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
    Please feel free to contact me if you have other questions
    Thank you
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • CP1525NW connected to wireless network. Running W7 64 bit. Printer shows offline constantly.

    I have a desktop and laptop configured with W7 64 bit. On laptop printer works fine, on desktop printer shows offline constantly and the only way to get it running again is by uninstalling the software and reinstalling. I have gone online and downloaded the drivers for 64 bit but I keep getting messages indicating the HP (xxxxx) program 32 bit has stopped working. Not getting this on laptop. They are connected to the same wireless network. Help? - Thanks

    Let's try to get the printer back to 192.168.0.103.
    Browse to the printer's web page again.
    Select Networking, then Wireless.
    Select IPv4 Configuration.
    Select Manual IP Address
    Enter 192.168.0.103 for the Manual IP Address
    Enter 255.255.255.0 for the Subnet Mask
    Enter 192.168.0.1 for the Gateway
    Press Apply.
    Now turn off your computer and printer.
    Turn on the printer and wait a minute. Print the network configuration page and verify that the IP address show is 192.168.0.103
    Turn on the computer. Verify that you can browse to the printer's web page and that you can surf the internet.
    Try printing
    BTW -- what model wireless-router do you have?
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • Unable to install Network Adapter Driver for Windows Server 2012

    Hi,
    We have purchased a new computer for our office. And on that machine, we want to install Windows Server 2012 Standard with GUI.
    Windows Server got installed on that machine. But we are unable to install drivers for our LAN card Intel® 82579V Gigabit Network Connection.
    Please help us to get it working.
    Thanks,
    Ronak Shah

    It is not working as the system is having Intel® 82579V Gigabit Network Card
    I guess, it's not supported on windows server 2012
    https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3299&DwnldID=18725&ProductFamily=Ethernet+Components&ProductLine=Ethernet+Controllers&ProductProduct=Intel%C2%AE+82579+Gigabit+Ethernet+Controller&lang=eng
    NOTE: The following devices do not have driver or software support for Windows Server
    2008 R2:
     - Intel® 82566MC Gigabit Network Connection
     - Intel® 82566MM Gigabit Network Connection
     - Intel® 82567LF Gigabit Network Connection
     - Intel® 82567V Gigabit Network Connection
     - Intel® 82577LC Gigabit Network Connection
     - Intel® 82579V Gigabit Network Connection
    Regards, Santosh
    I do not represent the organisation I work for, all the opinions expressed here, are my own.
    This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Blog |
    Wiki

  • Downloading and Installing a Full Solution Driver in Windows 8 Using a Wireless Connection

    Learn how to download a full solution driver for your printer from HP's website and install it using a wireless connection. The full solution driver provides you with all the tools and software needed to use all of the printer's intended functions.
    The steps shown in this video might not match exactly what you see on your screen.
    For other helpful videos go to hp.com/supportvideos or youtube.com/hpsupport. More support options for your printer are available at hp.com/support.
    This video was produced by HP.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.
    This question was solved.
    View Solution.

    I hope you find this video useful for your new Windows 8 machine!
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • How and where do I download and install a DVD R Drive for Windows 7 dual boot?

    I was prompted to have a DVD R Drive in order to burn the ISO of Windows 8 Consumer Release Preview on my Windows 7 running operationg system on my MacBook Pro. I just realized that I do not have the driver when I checked "My Computer". Hence, I could not burn the ISO file onto my blank DVD.

    you can if you have 30-40GB free space use the setup program to install 8 and archive 7, that leaves 7 there in place.

  • Can not install VXI-MXI-2 driver under Windows XP

    I have a new IBM IntelliStation M Pro PC with Windows XP Pro (but only Service Pack 1) that is having a hard time getting the VXI-MXI-2 PCI driver installed. It reports: "There was a problem installing this hardware: PCI-MXI-2 This device cannot start. (Code 10)".
    Taking a look at some issues raised on the "Troubleshooting PCI-GPIB, PCI-DAQ, PCI-MXI-2, PCI-IMAQ Installation Problems" page, I have dealt with the following:
    1) "PCI Bus Mastering" - originally this was turned off for both PCI slots.  I have turned both slots on, but no change.
    2) PCI slots - I have tried the card in both PCI slots in this machine.
    3) "More that one PCI bridge (very rare)" - my system reports two other PCI bridges: one for the SCSI interface to my hard drive and another for use of the 1394 port. Could this be the issue and what would be needed to fix it?
    Thanks!

    NI-VXI 3.3.1 installs an older version of NI-VISA (2.6, I believe)
    which sometimes has problems with newer systems and results in this
    "Code 10."  Installing the latest version of NI-VISA (currently
    3.5) should fix the problem.
    Robert Mortensen
    Software Engineer
    National Instruments

  • Can not installed the Sound card driver for Windows XP SP3?(CQ40 333TU)

    my notebook model is CQ40 333TU, i downgraded from windows vista to windows xp sp3, but i can not installed the sound driver?  and i can not found the xp driver in hp web, help me.

    This might help>>>
    http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=26
    http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=230
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Installing color Laserjet 3600 driver on Windows 7 machine

    When I installed the drivers from the HP website for my color laserjet 3600n printer, it does not show up as "Printer and Faxes" it show up below as "Unspecified".  It then is not recognized as a printer, and I am unable to acess the device.  It also cannot be deleted for a new install.

    mikeg1,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • The driver for windows 98 on printer Deskjet 3000

    1. HP Deskjet 3000 Printer CH393A
    2. Windows 98
    3. For me are necessary the driver for printer HP Deskjet 3000 for Windows 98. Please, help!

    You may download audio drivers for XP from Lenovo site or from www.realtek.com.tw.
    Message Edited by Peter on 05-21-2008 01:52 AM

Maybe you are looking for

  • Deleting multiple entries of identical event in iCal?

    Two events entered in iCal were duplicated from original date in all following dates of the calendar.  These are the only events which produced multiple duplicate entries. Cannot delete the duplicate entries using 'Delete' key or 'Delete' in 'Edit';

  • HP 5520 all-in-one will not print alignment page

    Printer printed page as if there was no black ink. Replaced cartridge and tried to align but would not print a proper alignment page. Replaced all cartridges.Page it prints is not recognized in scan. I have tried everything. UnPlugging, reload paper,

  • Swift MT103 Interface with SAP

    Hello all, My client is looking to implement the Swift MT103 for outgoing payment. If I made the outbound interface then I should have inbound Interface also to received the bank confirmation against my MT103? Or this inbound confirmation is optional

  • HT4528 old text messages are being deleted automatically

    my old text messages are being deleted automatically but this seems to only happen with one contact. Has anyone experienced/fixed this?

  • Lost all desktop layout apps in dock/content of iTunes, iPhoto, EyeTV

    Hi .. I've now had my iMac for just under three weeks and was thrilled with ease of replication of all settings, apps, content etc. etc. from my iBook via FireWire. Brilliant! BUT.... this morning, on startup, was surpised to find that EyeTV, IPhoto