Install agent problem on proxy

Hi
i got some problem on install agent process in intranet and no cross any routes.
my agent version is 10.2.0.2 and problem platform are linux and hpux.
i have not check proxy when install agent , and process next step , it's fail on "Oracle configuration manager proxy" window and can't process next step ,and then issue a message "Oracle configuration manager proxy can't established ,please check your network connection and proxy settings ,and try again" ,even i check proxy and setting proxy , it's alse has issue ....
But in another platform windows , it's fine and no proxy check box.
someone have issue like this?

Seems proxy credential are incorrect in Oracle configuration manager proxy screen
Please ,please provide valid proxy credentail or uncheck the check box enable proxy to proceed the agent installation

Similar Messages

Problem installing agent on new database server

Agent11g> ./runInstaller -silent -responseFile /u01/oemAgentStage/linux_x64/response/rac1_additional_agent.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 150 MB. Actual 12211 MB Passed
Checking swap space: must be greater than 150 MB. Actual 16002 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-09-07_04-49-04PM. Please wait ...Agent11g> Warning: Is the following line present in /u01/oemAgentStage/linux_x64/response/rac1_additional_agent.rsp correct?
MYORACLESUPPORT_USERNAME=
Warning: This line is not added to HashMap
Warning: Is the following line present in /u01/oemAgentStage/linux_x64/response/rac1_additional_agent.rsp correct?
MYORACLESUPPORT_PASSWORD=
Warning: This line is not added to HashMap
Warning: Is the following line present in /u01/oemAgentStage/linux_x64/response/rac1_additional_agent.rsp correct?
COLLECTOR_SUPPORTHUB_URL=
Warning: This line is not added to HashMap
*** Check for updates ***
*** Select Installation Type ***
*** Check Prerequisites ***
*** Specify Oracle Management Service Location ***
The specified Management Service on host 192.168.1.51 at port 3872 is unreachable. Check the connection details for the Management Service to ensure that you entered the value for the host name correctly
Response File contents:
OMS_HOST="192.168.1.51"
#OMS_PORT="7799" ORIGINAL
OMS_PORT="3872"
AGENT_REGISTRATION_PASSWORD=Tiger2231
s_agentServiceName="GridAgent"
#Please Don't change the values of these variables
#FROM_LOCATION:<String> Complete path to the products.xml.
#b_upgrade:<Boolean> "whether it is Upgrade or not"
#EM_INSTALL_TYPE:<STRING> install type
FROM_LOCATION="../stage/products.xml"
b_upgrade=false
EM_INSTALL_TYPE="AGENT"
ERROR: Silent Install has failed. Please check the log files for more details.
OMS is up and running.

Re,
did you need install agent form database host ? Did you try deployment from OEMGC ?
We deploy all our agents 11.1 from OEMGC.
*T

Communication problem with proxy server

We have establish the configuration of an iPad to access the enterprise net, but when trying to access any webpage we get the next message: Safari can not open the page. Error:"There is a communication problem with proxy web server (HTTP)"
The access has no problems with other movile devices.
Ahy help?

Hi,
I am not sure whether you have already solved the problem or not....
Do the following to deploy MobileBIService.war file on tomcat
1.Stop Tomcat Web application server.
2.Copy the file, MobileBIService.war from [Install directory]\Mobile 14\Client to the Tomcat's "Webapps" directory.
In my case, I copied the MobileBIService.war from C:\Program Files (x86)\SAP BusinessObjects\Mobile14\Client to C:\Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps. ( I used BO 4.0 SP02)
3. Start Tomcat.
Restarting Tomcat would automatically deploy war file as a Web App
One folder u201CMobileBiServiceu201D will appear in webapps folder when MobileBIService.war is deployed successfully.
Hope it helps.
Regards,
Ankur

Install agent on solaris 10 using agent deploy application?

Hi all,
I have installed 10g grid control on solaris 10 with new repository database on same machine.
The OMS, and agent is running on grid host.
Now I want to add other hosts (targets) into grid. For this, I have to install agent on target hosts. I am using agent deploy application method for installation of agent.
It is giving error
Istall --> Failed
"Pre-Install Script is Not Executed, Install is Failed, Run root.sh is Not Executed, Post-Install Script is Not Executed, Collection of Logs is Success"
version for agent and OMS is 10.2.0.1 and for repository database is 10.1.04
any idea, how to troubleshoot this?

Did you get answer? I had same problem on agent 10.2.0.4 deployment on linux 2.6.9-55.ELsmp.

InterMedia Web Agent problems...

I have Oracle 8.1.5 and OAS 4.0.8 on an NT machine. I have installed interMedia Web Agent, having shut the OAS services down first, configured the application as described in the doc and restarted all services. I have one listener for OAS on port 90. When I try to access http://servername:90/intermedia/~admin I get a 'Page cannot be displayed' error. Why?
I have checked all the settings within OAS and they look fine. NT is running SP5. I can access http://servername:90/ fine.
Any help gratefully received!
Lee

The interMedia web agent is installed in the
OAS home and you can see the intermedia application and cartridge in the OAS admin page?
Have you checked the OAS wrb.log file? That is where errors should be displayed. If it is a web agent problem, check <windows_dir>wsclstch.err or log files in <OAS_HOME>/ord/web/logs.
What do they say about starting the agent?
Test the agent with http://host:port/intermedia/~test
Larry

Error applying transforms when trying to install Agent

Several Windows XP machines were experiencing problems that seemed to be associated with the ZENworks agent. I've tried to reinstall the agent using the Install Agent utility but I received the message:
"Workstation <computer name> Failed - Windows error 1624 (Error applying transforms. Verify that the specified transform paths are valid.)"
I tried uninstalling the agent on the local computers and received almost the same message:
"Error applying transforms. Verify that the transform paths are valid."
We are in a Windows Server 2003 environment. ZENworks Desktop Management is running on a NetWare 6.5 server. I just setup Middle Tier Server on a Win 2003 box. It's only the Windows XP machines that are giving me trouble. Distributing the agents to Windows 2000 boxes worked fine.

pbenjamin,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com/ to search the knowledgebase and check the other support options available on that page under "Self Support" and "Support Programs".
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

When trying to uninstall iTune (because the current install has problems), I get the error message 2324. What should I do to reinstall the application?

When trying to uninstall iTune (because the current install has problems; iTune error message states it cannot sync and that I should reinstall the application; also, it fails when I tried to upgrade to the latest release), I get the error message 2324. What should I do to reinstall the application?

That installer error is a "Can't open file" error
It suggest that you may have a corrupt file.
Try running a disk check
http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors
If it fixes errors try uninstalling iTunes again.
If that doesn't work, is it possible for find out the name of the problem file, is further information available? Try looking in your Action center - that's on the control panel. Another place is in the Windows Error logs. From the start menu , right click on "Computer" and select manage, then Event viewer.
If nothing emerges, try a manual uninstall of iTunes and related programs according to this method:
http://support.apple.com/kb/HT1923
Don't worry if an uninstall fails, that is expected. Go on to the part where you have to delete files (2. Verify iTunes etc completely deleted) . Hopefully you manage to find a file that can't be deleted, that is the one we will need to deal with.

CS1 Install/Uninstall Problems ?

I can't uninstall CS1, nor can can I reinstall Photoshop from CS1, which is presently not installed. My OS is Windows Vista Home Premium. I am out of warranty and Adobe will not provide suppport. I have read all I can find about FLEXnet licensing suspecting there is a connection. When I try to either install or uninstall CS1, I get an error message from Microsoft saying that "Adobe CS1 installer has stopped working". There is no other information unless I open the Adobe File folder for Photoshop from CS1 that I saved to my desktop. I can initiate the install procedure from that folder, but when prompted for the original product serial number a message states that the serial number I have provided is invalid. I have talked with Adobe however, and their records indicate that I have a valid serial number.
I have gone to "Services" using the administrative tools in the control panel and tried setting FLEXnet Licensing on manual, then on automatic, and finally disabling it temporarily. I have gone to the Start Up menu on the desktop and entered "msconfig" in the search box and gone to services where FLEXnet was at first "stopped" and is now "running".
On some forums there are recommendations to first copy and save FLEXnet to another area of the hard drive, then delete it altogether from its original location, and then uninstall ALL Adobe software in the computer before reinstalling everything. Other contributors strongly caution the removal of FLEXnet, and some users have complained of ongoing problems after deleting FLEXnet. Firstly, I'm not sure I can figure out how to copy and save FLEXnet to another drive, and secondly I'm afraid of the possible results. Even if I can accomplish those tasks I don't know if that procedure will then allow me to either uninstall the portion of CS1 still in my computer, or reinstall the Photoshop that presently won't install. By the way, all the CS1 programs that remain in my computer are operational. Photoshop is the only missing component.
I am not well versed in technology, and much that I read in the forums is only partially comprehensible to me. If you have the patience and knowledge to help me unravel this mess I would love your help. Thanks. Harrison

Thank you Bob. It was very nice of you to write. I have been using CS1 with Vista since Vista came out. I'm aware that compatibility is considered a significant issue. Fortunately, I never had any problems until now, although I would have replaced CS1 with a more recent and compatible version if money were not part of the equation for me.
Adobe told me that if I bought the CS5 they would help me straighten out any issues now caused by the CS1, but otherwise they would not help. I did not think to ask if Adobe has designed CS5 to be compatible with Vista, but I will. I may buy the more recent version out of necessity, but it does not seem unreasonable to me that Adobe should help someone with a valid serial and registration number access their software regardless of warranties. The problem at hand seems to be a glitch in the licensing application provided by FLEXnet that I presume protects Adobe from unauthorized use of their products. I am wondering how much this situation actually has to do with system compatibility, given that I have been using the software for roughly two years with Vista, or whether it is simply that Adobe's FLEXnet licensing shield can work against legitimate users under certain circumstances. Adobe did not mention FLEXnet to me, but I would like to know one way or the other if FLEXnet is at the core of the problem.
Thank you again Bob for writing. I may wipe my OS clean and reload everything. I suspect the CS1 might work then, but I do realize that CS1 is old by technological standards, in spite of the fact that I would gladly continue to use it. I am among those people that find the cost of keeping current very difficult, and I find it exasperating that so many products and services become obsolete very rapidly when considering their relative cost. Have a nice weekend.
Best Regards,
Harrison
Original Message -
From: BobLevine <[email protected]>
To: Alec Howard <[email protected]>
Sent: Sat, Jun 12, 2010 4:09 pm
Subject: CS1 Install/Uninstall Problems ?
The original CS is completely unsupported under Vista or Win 7 and now that CS5
s out, you're out of the upgrade loop. I wish I had something positive to tell
ou but I don't.
ob

How to use installed agent?

Hi all,
   EM: 12.1.0.2
   Host: RedHat 6.3 64 bits
   DB: 11.2.0.3
   I have installed successfully the Grid Control 12c on HOST01. I suppose that the installation install all the Grid control 12c binaries and an agent in the host where the repository database is. What i want to know is how to use that installed agent to monitor the repository database? I tried to manually add a target to host HOST01, but an error appears to me saying that an agent is already installed on the machine. How to use that agent to monitor my repository database?
Thanks in advance.

You can discover (add) the repository database target to start monitoring it using the following steps:
- Navigate to Setup > Add Target > Add Targets Manually
- From the Add Targets Manually page, select Add Non-Host Targets Using Guided Process
- From the Target Types drop-down list, select Oracle Database, Listener and Automatic Storage Management
- Click Add Using Guided Discovery
- From the Add Database Instance Target: Specify Host page, select the host where the repository resides, and click Continue
- Follow the process to discover the repository database
Regards,
- Loc

Is there a SCOM install agent for SLES on PPC64?

Is there a SCOM install agent for SLES on PPC64?
Trying to install an agent for SCOM on Suse VM units that are hosted on IBM's power 7 hardware.
While i do see .ppc AIX agent installers I do not see one for SLES on ppc64.
Has anyone installed SCOM on SLES ppc64 or know of a viable agent for the install?

To elaborate a bit, Microsoft definitely does not offer an agent for SLES on PowerPC.  Linux has been ported to a lot of different processor chip architectures, which is great. But Intel x86/x64 is by far the most popular, and it's the only
chip architecture for which Microsoft supplies an agent for monitoring Linux. As you noted, there is an agent for AIX on PowerPC, but AIX is a very different operating system from Linux, and the agent for AIX on PPC will not work on Linux on PowerPC.
I don't see Microsoft doing an agent for Linux on PowerPC. We would need to see a significant business opportunity for that to change.
I would note that the source code for the OpsMgr agent for Linux/UNIX is available at
http://scx.codeplex.com, along with instructions on how to compile and build the agent. Someone with developer skills in C++, compilers, makefiles, etc. could definitely build an agent for SLES on PowerPC.  For
example, I'm aware of someone who has built an agent for Linux running on the IBM S/390 (z-Series) chip architecture running as a guest under zOS and has it working with SC 2012 OpsMgr.   But you would be on your own,
perhaps with help from the community, to make that happen.
Michael Kelley, Lead Program Manager, Open Source Technology Center

How can I install ff through a proxy???

For some reason, I must access the internet through a proxy server. But during the ff's installation, there is not any optional configuration to indicate the installation program how to access the internet. Then the installation fails again and again.
So, you mean, we guys, who must access the internet through a proxy server, should not use your product?

I don't know about trying to actually install Firefox thru a proxy, but after you download and install Firefox you can setup your proxy parameters like this.
Tools > '''Options''' > Advanced - Network > Connection = Settings <br />
Setup your Proxy settings in that pref window.

Where to install agents?

Hi,
I have following architecture:
- Server 1 - ODI installed with option Server
- Client 1 - ODI installed with option Client
- Client 2 - ODI installed with option Client
- Server 2 - Oracle DB installed - ODI Repositories created
- Server 3 - Oracle DB - source system
- Server 4 - MS SQL Server - source system
- Server 5 - Oracle DB installed - target system
I not sure where to install agents for this architecture:
- on Server 1?
or
- on Servers 3 or 4 (source systems)
or
- on Server 5 (target system)
What solution will be the best one in this case?
Thanks in advance!

It is best to install the agent as close to the target as possible. So, in your case it will be on Server 5.
Moreover, since you have only one target, then you have the advantage that you can install only one agent and it works.
Just keep in mind, that while installing the agent on the Server 5,
Server2, server3 and server4 should be visible to Server 5.
To explain more the above statement,
We have Filesystems FS1, FS2 on which the source files are located.
And the agent is located on ORADB1 which is the target Oracle DB. So, the filesystems FS1 and FS2 are visible to the system on which ORADB1 is installed and hence the agent on ORADB1 can also see the filesystems and hence access the files for processing.
HTH

Install agent fail (Agent host must be registered before an agent can be installed or upgraded.)

I got the following error with trying to install agent
# java -jar agent.jar -d /u01/avagent/
Agent host is not registered.
Agent host must be registered before an agent can be installed or upgraded. Agent deployment failed.
database firewall ip address is 10.0.0.10 (for management) and 192.168.0.10 (for traffic source)
auditvault server ip address is 10.0.0.11 (for management)
I have 2 IP address on my DB 10.0.0.9 and 192.168.0.9
when i register host with ip 192.168.0.9 i will get the error
but if i register host with ip 10.0.0.9 installation is fine with no error
i want to monitor audit traffic on 192.168.0.9 interface which is for client to access so i need to register host with ip 192.168.0.9

hi Stefan,
this is expected behaviour, or at least it's better to say : in a multi homed system the choice of the network path that is used is determined by the underlying tcp network,
it doesn matter which path the sqlnet connection from agent to AV server takes as long as it is able to connect. Your statement about 'monitor audit traffic on 192.168.0.9'
does not make sense, the agent / collection framework is the part that fetches audit records from secured targets and has nothing to do with monitoring network traffic since
that part of the functionality is done by the firewall component. Anyway if you want to change the nework path you need to use 'route' and force it,
greetings,
Harm ten Napel

Installing Agent

Hello All,
We have OEM running on Window. :-(
Our Oracle database 10.1.0.4.0 is running on AIX 5.2.
I need to install Agent on AIX 5.2.
I have downloaded "AIX_Grid_Control_agent_download_10_1_0_4_1.cpio.gz".
Are there any good documentation on "how to install agent on unix box?".
OR some one give me steps to accomplish task.
thanks for any feed back.
Regards,
DN

Hi DN,
I was insttalling AIX_GRID_Control_agent_download_10_1_0_4_1.cpio.gz
after unpack, there was no Disk1 directory. These are the following files and directory after unpack:
-rw-r--r-- 1 oracle dba 1531 Jan 03 05:12 instructions.txt
-rwxr-xr-x 1 oracle dba 15002 Jan 03 05:12 agentDownload.aix.bak
-rw-r--r-- 1 oracle dba 18235 Jan 03 05:14 agent_download.rsp.bak
-rw-r----- 1 oracle dba 753056256 Jan 12 08:22 AIX_Grid_Control_agent_download_10_1_0_4_1.cpio
drwxr-xr-x 5 oracle dba 256 Jan 12 14:25 aix

Hello, i own an i7 all in one mac. I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers

I tried to partition him using bootcamp but didn't have mac os cd neither mac instalation. the problem i am dealing now its that i cant go back to OS partition since its not appeared when i restart c and no win drivers to have a properly running system. I've thought as an option to re-download boot-camp and run the instalation from windows partition and see if i can repair it that way, didnt try yet thought just in case anyone has a better prposition or dealed with the same problem

Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck.

Install agent problem on proxy

Similar Messages

Maybe you are looking for