Install Airport Utility on a Windows Vista PC

I try to install Airport Utility on a Windows Vista laptop but the Windows installer stops and says that the Administrator of the laptop has not authorised installing software. I am the Administrator myself, and I can install other software, so how can I solve this?

Excellent news. Glad you're up and running again.

Similar Messages

Error Installing Airport Utility on OSX 10.8.2

I can't install Airport Utility on OSX 10.8.2 so that I can install Airport Extreme. Error message says the version of Mac OS X is not supported. What can I do? Easily!

You have to install AirPort Utility from the disc if you're using Windows on your PC, so that's because Apple doesn't say it. Also, you could have bought an old AirPort Extreme that includes an older AirPort version for another Mac OS X

HT2305 I need helping with re-installing Apple Software Update for Windows Vista, please. :)

Hello, I will get my new Ipad 2 32GB on April, so I will have enjoying with Ipad with bringing up my excitement on Ipad. I need re-installing Apple Software Update for Windows Vista 32bit, but I did install iTunes, Safari, and Iphone configuration utility that it did not included Apple Software Update software. Please send me download file of Apple Software Update, immediate. Thanks
I do not certain about Ipad configuration utility, would be working with Iphone configuration utility?
david

I went into checking with Apple Software Update then I clicked Control Panel - "Repair" It was restored to start menu, thank you much thumb up to b noir Big Helping me! David

HT4259 I don't have AirPort Utility on my Windows 7 laptop.

I have a Netgear Extender located in the middle of my house to take my WIFI signal to the far end of the building. I can log in using my IPhone or iPad but I cannot open FaceBook or Netflix on either device when I am in the far end of the building depending on the extended network. Any ideas on how I can fix this so I can use all the aps on my Apple devices?
The articles sent to me by Apple support gave instructions for using the AirPort utility but I don't have this on my laptop.
Thanks for any help you can offer.
Lindat1203

It sounds like you still need to download and install AirPort Utility 5.6.1 for Windows on the PC

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Issue while installing NWDW 7.0 on Windows Vista

Hi all,
    Please give me your inputs in resolving my issue.
     I am trying to install NWDW 7.0 on windows vista machine(32 bit) and the installation stuck at the phase "Import Java dump". It's in the same phase from yesterday and couldnt proceed further/ throwing any error.
I have installed JDK 1.4.2_13 and using MAX DB version as "50095979_3   NW 7.0 Presentation - MaxDB Release 7.6.03 " from market place.
I have my time zone as GMT + 1.00 .
I 've referred few posts but couldnt figure out the solution.
Any pointers are highly appreciated.
Regards,
Sandeep.

Hi Senthil,
I've checked sapinst_dev.log file and couldnt find any error/ inconsistencies ecept the following oen which ended up incompletely.
    TRACE      2009-11-05 06:47:54.673 [synxcfile.cpp:339]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/NWDW7.0 Installables/51033522/JAVA_EXPORT/JDMP/IMPORT.XML to C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB
INFO       2009-11-05 06:47:54.693 [synxcfile.cpp:493]
           CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/NWDW7.0 Installables/51033522/JAVA_EXPORT/JDMP/I
I couldnt find dev_server0.log and dev_w0.log files .

When installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an erro

When installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Internal Error 2739" I have used the cleanup script included in Adobe Photoshop CS3 installer, and have removed all traces of Adobe apps including the beta versions and Acrobat 8 pro, and I still get the same error, how can I install this application? is there any way or do I have to reformat and reinstall windows?

Hello everyone,
I was having the same issue:
"Setup Error. Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Quit."
If you receive this error also, press Quit and follow these steps:
1. Start
2. Control Panel
3. Administrative tools (in classical view)
4. Event Viewer
5. Application
You will see something like this:
Double-Click for error (emphasized by red color). I have an error like this:
"Error 1327.Invalid Drive: E:\" if you have the same or e.g. Drive F:\ ir whatever letter, you should solve this problem extremely easy - just insert USB-flash into computer (it will launch as E\ or whatever disk) and than run installation again. It will work than.
Setup doesnt start if disk is offline.

Can't install Airport Utility 5.6 in OSX 10.7.5

I have a 2005 Airport Extreme that I manage using an iMac running Mac OSX 10.7.5. I recently tried to access my airport to check the IP address. Airport Utility could not access the Airport and told me that I needed to install Airport Utility 5.6 to access the Airport. I installed AU 5.6 and tried to access the Airport, but this time was told that this version of AU does not work with Mac OSX 10.7.5. So I downloaded AU 6.2. On this third attempt to access my Airport, I was told that this version of AU does not work with this Airport and I need to install version 5.6. I'm stuck. Does anyone have any suggestions (other than buying a new Airport, that is).
Thanks for the help,
Paul

Make sure you download it from this URL
AirPort Utility 5.6 for Mac OS X Lion
It should install without any difficulty.
AU 5.6.1 is for the latest AirPort Base Stations for systems running Snow Leopard.
NB from the following
AirPort Base Station: How to set up and configure an 802.11g AirPort Extreme Base Station or AirPort Express in OS X Lion
If you are using OS X Lion and wish to set up or configure an older 802.11g AirPort Extreme Base Station, or 802.11g AirPort Express, manually download and install AirPort Utility 5.6. AirPort Utility 5.6 can be used to configure earlier 802.11g AirPort Extreme Base Station, and AirPort Express; it can also be used for 802.11n AirPort base stations.
To obtain and use AirPort Utility 5.6:
Go to http://support.apple.com/downloads/.
Search for AirPort Utility 5.6 and download it.
Allow AirPort Utility 5.6 to install.
Open AirPort Utility from the /Applications/Utilities folder.
Note: If you are configuring or setting up a newer AirPort Base Stations that support 802.11n, you should use AirPort Utility 1.0 for iOS or AirPort Utility 6.0 for OS X Lion, or later.
You can have both AirPort Utility 6.0 and 5.6 in the /Applications/Utilities folder.
AirPort Utility 5.6 will appear in the /Applications/Utility folder as "AirPort Utility 5.6"
AirPort Utility 6.0 will appear as "AirPort Utility"

How do i install airport extreme on a windows pc and route it to another windows desktop?

How do I install airport extreme into a windows desktop pc and then successfully route it to another windows desktop?

The AirPort Extreme Base Station (AEBS) is an Internet router that supports both wired and wireless network clients. You can connect both of your desktop, using either media, to the AEBS for network connectivity.

Not able to install ms-office 2013 in windows vista home basic

Hi
recently,we have purchased ms-office 2013 but we are not able to install the ms-office 2013 and it is showing not compatible.
it is an dell vostro laptop v1510.It is an 32-bit operating system .
Could you please share your ideas why i am not able to install MS-Office 2013 in windows vista Home basic.
We are using windows mail whether this windows mail will migrate all mails automatically to outlook 2013.
looking for your reply at the earliest.
Regards
Pradeep

Office 2013 does not run on Vista, it is only compatible with Windows 7 and above. You will not be able to install it.
System Requiremets for Office 2013
While the above link is for Office 365 as well as Office 2013, it shows the requirements.

How to install Minisap 6.1 in Windows Vista?

Helo gurus, how are you?
Before i install windows vista, i need to know if is possible to install minisap 6.1 with windows vista. Anybody did the installation in windows vista? Are there patches for download or other configs to change??
Anyone asked this before in the forum ( i did not find anything ), so, i am asking now, please help me. Thanks!
If it is not possible, please, answer about others versions of minisap.
4:08 PM
Message was edited by:
        Rodrigo Paisante

I've tried to install Minisap on Vista & get the following error when triggering "Start SAP ABAP Engine":
              ERROR_ACCESS_DENIED: Access is denied. [shmnt.c      2055]
[Thr 980] *** ERROR => ShmCreate: Create (5,4096,1) failed [shmnt.c      469]
[Thr 980] *** ERROR => [CreateOsShm] CreateFileMapping(5,4 KB) failed with Err=5
If anyone knows how to fix this problem, please let me know!!!
[email protected]
(South Africa)

Installing Airport Utility 5.6.1 in order to configure older Airport Extreme/g model doesn't work as it won't install with OS 10.8.5 Mountain Lion. Solution?

I need to configure Airport Extreme Base Station 802.11b/g but Airport Utility 6.3.1 will not work.
I found this page: http://support.apple.com/kb/HT5022
it recommends installing Airport Utility 5.6 which downloads as 5.6.1
but it will not install on Mountain Lion OS 10.8.5
so what to do?

AirPort Utility 5.6.1 is for Snow Leopard. Use 5.6 for Lion or Mountain Lion.
You can use the following workaround to install AirPort Utility 5.6 on a Lion or Mountain Lion Mac:
Be sure to read the caveats at the end.
Lion / Mountain Lion's package installer will refuse to install superseded versions of AirPort Utility. Instead you will need to use a package extractor such as Pacifist or unpkg. Pacifist is shareware, unpkg is free.
Download Pacifist here: http://www.charlessoft.com/
Download unpkg here: http://www.timdoug.com/unpkg/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
Open Pacifist and from its File menu, navigate to the package and open it.
Click the "reveal triangles" until you see AirPort Utility 5.6.app:
Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
The most recent version of AirPort Utility included with Mountain Lion should be used to configure 802.11n - capable AirPort Base Stations. Make no attempt to delete it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist. Use the older version only as necessary for older AirPort Base Stations that cannot be administered any other way.
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
Keep in mind that Apple's decision to abandon support for the original AirPort Express and AEBS was for reasons known only to them. Remember that you are using obsolete equipment, should some future OS X feature not work for you.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

All,
A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
So happy to be done w/this one!
Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
TC

Can we install oracle 10g database on Windows Vista Home Edition?

Can we install oracle 10g database on Windows Vista Home Edition?

You didn't specify which Oracle10 Edition.
In the case of SE/SE one/EE, with a paid license Supported has a mean impact on production environments with paid licenses, since you wouldn't run on an unsupported platform facing the risk of being left without technical support from Oracle in case of an emerging issue.
For the XE Edition, this is not a certified combination, since the only certified editions are the Business, Enterprise, and the Ultimate editions, but you can try it, you don't have nothing to loose, supported, certified vs. unsupported in this case makes no difference since this XE is not supported either way (no patchsets, no bug fixes, no technical support from metalink), just an AS IS free software.
On the license agreement terms displayed when you download the XE software it states:
"No Technical Support
Our technical support organization will not provide technical support, phone support, or updates to you for the programs licensed under this agreement."
and
"THE PROGRAMS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. WE FURTHER DISCLAIM ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE."
In case someone would be able to win a trial against oracle due to damage from the use of this software, the amount paid at maximum is 1,000.00 USD, not enough to even pay the lawyer's lunches.
For the XE users the primary source of 'kind of support' is the oracle forums, either the installation forum, the general database or the specialized XE forum.
Of course if this is for your own personal use for learning and testing and there are no third parties you could damage by doing this and if you don't have a paid license for this installation you may try it, but don't expect the Enterprise Manager to behave as defined by the manual, most of it won't work since the Home Edition doesn't have the privileges required for EM to work.
If this is your personal computer and when you bought it the computer provider installed from factory Home Edition, and if you want something to work there, you can try to install a Virtual Machine and install Oracle 10g on a supported guest OS.
~ Madrid

Problem installing Service pack 1 for Windows Vista 32-bit from windows update

I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.

Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul

Install Airport Utility on a Windows Vista PC

Similar Messages

Maybe you are looking for