Install and build instructions

HI, can someone please help me with some instructions on how to install and build these projects.
I am trying in Flex Builder 4 : import > osmf_source_s4.zip. This just pretty much fails for me as there are no flex project files.
Or.. do i need to unzip the dir and manually import each separate project?
cheers,
MaTT

If at all possible, for future builds, could the OSMF team build the projects in the releases in a way that they import without errors into Flex Builder (aka Flash Builder)?
For instance, in the v0.5 release, after import the projects under apps\samples display the error:
unable to open '\MediaFramework\bin\MediaFramework.swc'
Secondarily, might future releases please also include:
Sample App descriptions
Release notes of significant changes in the sample apps (such as the v0.4 to v0.5 changes noted here:
http://forums.adobe.com/message/2175742#2175742 )
The absence of the above may have related to the following post (plus similarly stymied developers who didn't post):
http://forums.adobe.com/message/2168279#2168279
Thanks again for your great work.
Best regards,
g

Similar Messages

How do I install and build and extension with extension builder 2.1?

Honestly, I am beyond frustrated right now.
1. Extension Builder 3 - This will only install and run with Eclipse. JRE 1.7.
This only allows me to use Extendscript to write scripts with. Extendscript is so frustrating to use. It seems like there are a lot of missing properties for working with color models in illustrator. The documentation is also terrible for Extendscript. Something that seems like it would be simple to do like export an RGB JPEG is impossible to spec out in the EXPORT JPEG settings. Its also impossible to set the color space of a NEW AI document unless you use the add(); instead of addDocument(); There are conflicting incomplete properties of both methods. If you use one, one set of settings is missing if you use the other another set is missing... WHAT IS SOMEONE SUPPOSED TO DO???
2. Flash Builder 4.7 will not run Extension Builder 3.
3. I bought Extension Builder 2.1 which is supposed to install Flash Builder 4.6, but the installation keeps failing right at the end. This apparently also requires that you use JRE 1.6 which is not compatible with Mavericks.
This all seems impossible... how in the heck are people learning how to do build extensions, its a surprise that any exist at all. If they do They are likely not building them with the Adobe tools. I know enough about code to be dangerous but don't have a doctorate in troubleshooting all of these compatibility, and documentation issues.
All I want to do is write an extension, or a script that allows me to
1. copy the art from two layers.
2. color the background of the AI document to the background color of the original document
3. resize art from both layers to fit on a 216 x 216 pixel square.
4. Save the document as a: JPEG - ANTI-ALIAS SUPER SAMPLED - 150 DPI - RGB - MEDIUM QUALITY - CLIP TO ARTBOARD - WITH THE SAME NAME AS THE ORIGINAL FILE
I AM AT MY WITS END WITH THIS WHOLE PROCESS. I AM ABOUT TO GIVE UP UNLESS SOMEONE CAN HELP GIVE ME A LITTLE INSIGHT.

Hi,
First of all, remember that Extension Builder 2.1 only supports building Flash based extensions which have been phased out. If you are building extensions for Creative Cloud and beyond, you should use HTML5. See more info here: Introducing HTML5 extensions | Adobe Developer Connection
The installation is probably failing because you have some leftovers from a previous installation. The installer will detect if you have Flash Builder 4.5 or Flash Builder 4.6 installed (NOT Flash Builder 4.7). If it finds that you have Flash Builder 4.5/4.6 installed, it will attempt to install the plugin on top of it. If it does not detect Flash Builder 4.5/4.6, it will install Flash Builder 4.6 Premium.
I highly recommend you look into the new HTML5 extensibility. Here you can find tons of resources: Adobe CEP Resources by Adobe-CEP
Best regards,
Hallgrimur

Could I install and build BPC server on MSCS?

Hello, experts:
Does somebody have experience of running BPC on the MSCS (Microsoft Server Cluster Service) environment?
I'd like to know that:
Is BPC work with MSCS?
Is there any actual systems?
Is there any documents related to that?
Please let me know if you have any information related to questions above.
Thank you.
Hiroki

Hello again,
Let me ask you one more thing about MSCS.
I've found a article about 64bit support in the page 9 of "SAP_BPC_5_1_Master_Install.pdf".
In that document, the total 64 bit environment (hardware, OS, SQL) is recommended for the DB servers, but 32bit environment for Web/AP servers so you have to set up your servers as multiserver of BPC.
I would like to ask, does it mean you should set up the servers described as below, if you want to build MSCS cluster for the availability issues, and at the same time you want to use 64bit machine for scalability issues?
- Web / Ap servers :
NLB of two or more BPC server on 32bit IIS on 32bit Windows
- DB servers :
MSCS cluster of two (or more) BPC server on 64bit SQL on 64bit Windows, one is active and other is passive.
I would be glad if you send me any information.
Thank you for your assistance in advance.
Hiroki

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

I removed Final Cut Pro X , followed the instructions, However my computer still thinks that is installed and doesn't allow me to re install

I removed Final Cut Pro X , followed the instructions, However my computer still thinks that is installed and doesn't allow me to re install

Does it say it is already installed, or not compatible? If you have more than one boot volume attached, is it possible a copy is also on another drive/
Ernie

HT201260 I'm trying to figure out which OS X version and build I need to completely reformat and then re-install the OS on my G4 Power PC (Quicksilver 2002)

So I've started my quest for the correct information and software required to completely erase and then re-install the OS on my G4 Power PC (Quicksilver 2002) roughly 2 days ago only to be stuck and very frustrated! So I could more than likely figure this out on own BUT the OS currently installed is so screwed up I cant even safe mode start it.. so I cant get the information I need from the "about this Mac" details if it were running. Is there another way to figure the correct OS X and build I'll need to reformat. I just want to return it to it's factory state and then give it to my kid. Anyone's help on this matter will be so very appreciated. Thanks

Be sure to look only for original or retail versions:
Original OS
Mac OS 9.2.2 (Mac OS ROM 9.0.1) and Mac OS X 10.1.2 (5P63)
Later OS
Mac OS 9.2.2 and Mac OS X 10.1.3, 10.1.5, or 10.2
Maximum OS
Mac OS X 10.4.11 (733, 800 MHz) Mac OS X 10.5.8 (933 MHz+)

Need to be able to setup printing for my Ipad2. How do I find the instructions. THe printer is installed and capable, but I do not see it from either my iPad2 OR iphone 4. Please advise.

need to be able to setup printing for my Ipad2. How do I find the instructions. THe printer is installed and capable, but I do not see it from either my iPad2 OR iphone 4. Please advise.

1. Make sure you've updated the printer firmware and successfully printed the test sheet from the printer.
2. Make sure that your iPad is on the same network as your printer.
3. Try printing from an app. To print this page from Safari, for example, go to the rectangle with the right- facing arrow on the toolbar, choose Print from the drop down menu, select your printer, and click Print.
Printing in apps is usually under the rectangle-arrow symbol, but is also sometimes found under the wrench- "tools" symbol.

How do you activate a 10.10.3 download. I have downloaded twice (2 gig each) and have restarted as instructed. I have also rebooted. "About this Mac' still reports 10.10.2 installed and I do not have the new photo app.

I have downloaded 1010.3 twice (2+gig each). The update window shows the 10.10.3 update has been installed, however, 'About this Mac' shows 10.10.2 installed and I don't have the new 'photo' app installed. Once more, the quality of Apple software approaches that of Microsoft - letting the user debug instead of delivering the quality that used to be Apple.
How do I activate the downloaded update.

There may well be a problem with the update package. I initially tried downloading the delta update (not the combo) from the Apple Support web site, and when I opened the package file, the installer ran but terminated almost immediately. I restarted and only got the normal reboot process, not the "Installing software" display. After restarting, I saw some evidence that the firmware updater was cleaning up some files, but nothing else appeared to have happened except that the 1.5Gb package file and a couple small subsidiary files had been left under /Library/Updates/_ManualUpdate.
I tried running the command line softwareupdate tool to see if it would recognize the already-downloaded package file (which is something you might also want to try before downloading again just in case it works), but no such luck. I then relented and used App Store, and that downloaded again and then performed the update successfully.
Of course, then I had to horse around with turning off all the "photos in the cloud" nonsense, but that's another story.

1,1 running Lion with XP Boot (re-install and what should i use for recovery disk or usb stick)?

i am trying to give my 1,1 mac pro a little love and would like to keep this machine running lion. i also have a boot camp installation of XP on it.
1. can anyone give me instructions on how/whether i can basically do a fresh install of Lion on this machine and minimize the system so it is not cluttered up with all my previous software etc, etc while still maintaining the original XP boot camp partition which i really need to have?
2. can anyone clarify for me what i should have on hand /if/ i need to boot into recovery mode or some other safe boot mode? i recently ran into an issue where i may have had to use the old Disk Utility format function and there was a reference to booting using the DVD install disks. however i am really confused as to what i should have on hand. ALSO the last time i had to do something on this machine i was told to boot into the Recovery Partition and it appears for some reason (perhaps because i had a "non-standard" windows 7 boot camp installation on the drive at the time??) that there was no recovery partition created when i upgraded to Lion.
- /anyway/ i am finding that i have the two ORIGINAL install disks for the mac pro on hand, a Max OS X Leopard and a mac OS X Snow Leopard DVD on hand but i am thinking that i should be creating some kind of USB stick similar to the one i created with yosemite? actually, i am not even sure what this USB stick for yosemite is for but i guess i can use it to boot into safe mode or something?
THANKS for any help as i'd like to get this business under control a little better in case i have an issue.
i'd also like to install Lion so that there is a Recovery Partition if possible and i think this may be possible if i don't have the windows 7 partition in the machine when i do a fresh install. any help would be great. thanks.

You have to go out of your way to build the Installer Disk yourself. But this tool makes it easy, and this site contains instructions:
http://diskmakerx.com
the bootable installer is basically to re-install the OS if i have to
Yes.
the recovery partition is somehow for fixing a problem
Recovery can go and get you the software and re-download it and start the Install, and allows the use of Disk Utility and can reset passwords.
or is there some overlap?
Yes. Both give you access to the Utilities that used to be on the Installer DVD. Disk Utility to Repair or initialize and a few other tools that can allow you to set up to install on an otherwise-bare disk or change your password.
is "Safe Mode" something completely different
Safe Mode is a way to start the fully-Installed Operating System in a special way. It first does one pass of Disk Utility (Repair Disk) against the Boot Drive. [Normally this would require booting from a different drive to make repairs.] Then it loads a minimal set of Apple-only kernel extensions, and uses a one-size-fits-all screen resolution. Then it demands your Username and password to proceed.
From there you can fix settings, use the Finder to add or delete things, and check operation with minimal extensions versus all your daily-use extensions. Very helpful for debugging extension conflicts and graphics settings problems, and fixing damaged settings. The next Restart builds a new extensions cache.

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

HOWTO: Install and use opensync-0.22 to sync Evolution to Nokia phone

Opensync-0.3x is unstable and fraught with danger, the only relatively-safe version is opensync-0.22. Installing opensync-0.22 is quite a task in x86-64 (i686 users might be able to use the unofficial kpiche repository on this page http://wiki.archlinux.org/index.php/Uno … ositories).
Here's how I got it to work in arch x86-64 to sync my Nokia 6300 phone over bluetooth (obex) with Evolution contacts and calendars. The first few steps should be fairly straightforward for most arch users.
1. Install evolution from repo via pacman if you haven't already:
pacman -S evolution evolution-data-server evolution-exchange
At the time of writing these are at version 2.28.11.
2. Load evolution and configure your default settings, you don't need to configure mail if you don't want to. Load some test calendar and contact data if you really want to.
3. Install and configure your bluetooth adapter and pair your phone as per http://wiki.archlinux.org/index.php/Bluetooth. Install openobex from repo via pacman, at the time of writing it is version 1.5-1.
From here things get a lot more difficult and a lot less arch-y. Opensync appears to be a huge state of wonk right now, and thus libopensync in the AUR is a huge mess (from http://bbs.archlinux.org/viewtopic.php?id=45683) and there doesn't appear to be a working 0.22 suite in the repo or aur. This issue is further complicated by not being able to mix and match opensync libs and plugin versions. Nevermind!
4. Get the dependency library tarballs from opensync.org:
libwbxml: 0.10.7 compiled for me in x64; from here https://libwbxml.opensync.org/wiki/Rele … xml-0.10.7
libsyncml: 0.4.6 is the only version that contains the openobex headers needed to make libopensync-plugin-syncml-0.22 compile; get it from here https://libsyncml.opensync.org/wiki/lib … .4.6-notes. Any later version of libsyncml doesn't appear to have these files (ref: http://bugs.gentoo.org/269187) and makes libopensync-plugin-syncml-0.22 fail at compilation, throwing these errors:
syncml_plugin.h:38:35: error: libsyncml/obex_client.h: No such file or directory
syncml_plugin.h:39:35: error: libsyncml/http_server.h: No such file or directory
5. Get the opensync-0.22 tarballs from http://www.opensync.org/download/releases/0.22/, at minimum you need the following:
libopensync-0.22
libopensync-plugin-evolution2-0.22
libopensync-plugin-syncml-0.22
msynctool-0.22
You can try other plugins if you want to, ymmv.
6. Build and install the depedencies using cmake as per the instructions in their INSTALL files; Build and install libopensync, msynctool and plugin-evolution, these shouldn't have any problems. libopensync-plugin-syncml won't build with default options because it won't be able to locate libsoup while configuring; add flag --disable-http to get around this. (if you need http I have no idea how to fix this). libopensync-plugin-syncml will also throw a compilation warning and refuse to compile:
% ./configure --prefix=/usr --disable-http
% make
cc1: warnings being treated as errors
syncml_plugin.c: In function '_manager_event':
syncml_plugin.c:297: error: 'smlSessionSetReceivingLimit' is deprecated (declared at /usr/include/libsyncml-1.0/libsyncml/sml_session.h:91)
The new libsyncml library (relative to the 0.22 plugin anyway) declares this, so a quick manual patch is to comment out lines 296 and 297 in the source code in syncml_plugin:
295 /*
296 if (env->recvLimit)
297 smlSessionSetReceivingLimit(session, env->recvLimit);
298 */
Save the file, you should now be ready to run make and make install.
7. If all went well, you should now be able to see both plugins loaded in msynctool:
% msynctool --listplugins
Available plugins:
syncml-obex-client
evo2-sync
I configured my phone and evolution in msynctool exactly as per this thread http://ubuntuforums.org/showthread.php?t=705103; copied here for brevity:
1. Let's go commando with OpenSync. First we create a group to refer to our sync session with. I've called mine "evolution-n95", but you can call it whatever you want. We then create the config for the Evolution side as the first member of this group.
$ msynctool --addgroup evolution-n95
$ msynctool --addmember evolution-n95 evo2-sync
$ msynctool --configure evolution-n95 1
2. Your text editor will pop up editing member 1 of your evolution-n95 group. Edit the config to look like this:
<config>
<address_path>default</address_path>
<calendar_path>default</calendar_path>
<tasks_path>default</tasks_path>
</config>
3. Now do to the N95 side, adding its config as the second member of the group:
$ msynctool --addmember evolution-n95 syncml-obex-client
$ msynctool --configure evolution-n95 2
4. Your text editor will pop up editing member 2 of your evolution-n95 group. Edit the config to look like this (remember to put your N95's MAC address and Channel number in):
<config>
<bluetooth_address>00:AA:11:BB:22:CC</bluetooth_address>
<bluetooth_channel>10</bluetooth_channel>
<interface>0</interface>
<identifier>PC Suite</identifier>
<version>1</version>
<wbxml>1</wbxml>
<username></username>
<password></password>
<type>2</type>
<usestringtable>1</usestringtable>
<onlyreplace>0</onlyreplace>
<recvLimit>0</recvLimit>
<maxObjSize>0</maxObjSize>
<contact_db>Contacts</contact_db>
<calendar_db>Calendar</calendar_db>
<note_db></note_db>
</config>
5. Now you're ready to rock and/or roll. Let's try syncing:
$ msynctool --sync evolution-n95
...and you should get a whole stream of mumbo-jumbo similar to the following:
$ msynctool --sync evolution-n95
Synchronizing group "evolution-n95"
The previous synchronization was unclean. Slow-syncing
Member 1 of type evo2-sync just connected
received event dsession
received contact dsession
Member 2 of type syncml-obex-client just connected
All clients connected or error
Received an entry pas-id-47AA3D7000000000 with data of size 4 from member 1. Changetype ADDED
Received an entry pas-id-47AAB03C00000000 with data of size 4 from member 1. Changetype ADDED
Received an entry 20080206T205400Z-5332-1000-1-0@lamaar with data of size 4 from member 1. Changetype ADDED
Received an entry 20080212T131911Z-5797-1000-1-0@lamaar with data of size 4 from member 1. Changetype ADDED
Member 1 of type evo2-sync just sent all changes
Received an reply to our Alert
Received an reply to our Alert
Going to receive 27 changes
Received an entry 1 with data of size 4 from member 2. Changetype ADDED
Going to receive 4 changes
Received an entry 2 with data of size 4 from member 2. Changetype ADDED
Received an entry 3 with data of size 4 from member 2. Changetype ADDED
Member 2 of type syncml-obex-client just sent all changes
All clients sent changes or error
All conflicts have been reported
Sent an entry pas-id-47BF9BC100000001 of size 92 to member 1. Changetype ADDED
Sent an entry pas-id-47BF9BC100000002 of size 104 to member 1. Changetype ADDED
Sent an entry pas-id-47BF9BC100000003 of size 113 to member 1. Changetype ADDED
Sent an entry 20080223T040625Z-14241-1000-1-0@lamaar of size 426 to member 1. Changetype ADDED
Sent an entry 20080223T040625Z-14241-1000-1-2@lamaar of size 252 to member 1. Changetype ADDED
Member 1 of type evo2-sync committed all changes.
Received an reply to our sync
Sent an entry 29 of size 205 to member 2. Changetype ADDED
Sent an entry 30 of size 153 to member 2. Changetype ADDED
Received an reply to our sync
Sent an entry 6 of size 362 to member 2. Changetype ADDED
Sent an entry 7 of size 345 to member 2. Changetype ADDED
Member 2 of type syncml-obex-client committed all changes.
All clients have written
Member 1 of type evo2-sync just disconnected
Member 2 of type syncml-obex-client just disconnected
All clients have disconnected
The sync was successful
$
Depending on your data to sync, you may see a LOT of info. This may be done quickly or take a minute or two. In any case, you should see "The sync was successful" at the end amd be returned to the prompt.
6. Pat yourself on the back - you're done. Sync again with the same command as much as you want.
ps. ignore the README in libopensync-plugin-evolution2-0.22

Shameless bump. Does anyone know if an iPhone running OS 3.0 can sync properly with iTunes version 8.0.2.20?

11g demo install and missing WLS_FORMS\stage folder

What would cause the stage folder under C:\Oracle\Middleware\user_projects\domains\ClassicDomain\servers\WLS_FORMS to get created?
I have 11.1.1.3 frpd installed and am running forms successfully from the 11.1.1.3 Forms builder with WLS 10.3.3. But I don't have this stage folder and the 11g forms demo instructions say to put frmjdapi.jar in ....\stage\formsapp\11.1.1\formsapp\formsweb.war\WEB-INF\lib and to edit weblogic.xml in ....\stage\formsapp\11.1.1\formsapp\formsweb.war\WEB-INF.
A search for weblogic.xml turned up several copies but all are under WLS_FORMS\tmp. The closest I found is C:\Oracle\Middleware\user_projects\domains\ClassicDomain\servers\WLS_FORMS\tmp\_WL_user\formsapp_11_1.1\e18uoi\war\WEB-INF. That's not the right place is it?
Edited by: Tammy Osborn on Oct 22, 2010 1:01 PM
Edited by: Tammy Osborn on Oct 22, 2010 1:01 PM
Edited by: Tammy Osborn on Oct 22, 2010 1:02 PM

The answer is yes, use the tmp folder instead of the stage folder specified in install instructions.

Having trouble installing Coldfusion Builder?

I am running Windows 7 and have already installed Coldfusion 9. When I go to install Coldfusion Builder I get an error even before the installer loads up. The error I am getting is as follow:
C:\Users\Owener\Downloads\Coldfusion..exe
The NTVDM CPU has encountered an illegal instruction.
CS:0e1d IP:o1f3 OP:63 65 42 65 67
Choose 'Close' to terminate the application.
Does anyone have any idea how to solve this problem?

There shouldn't be a problem running on Windows 7: it installed OK on my Win7 machine.
I just noticed this thread is in the CF forums, not the CFB forum. They are two separate and only notionally related products. I recommend re-posting your question here: http://forums.adobe.com/community/labs/coldfusionbuilder. One benefit is that that forums is monitored by Adobe people, whereas the CF forums are not.
Adam

Tutorial to install and configure

Hi everyone,
I think my problem is quite simple for all of you.
I'm having problems to install and configure Gatekeeper because I think the tutorials here:
http://download.oracle.com/docs/cd/E14148_01/wlcp/ocsg41_otn/installguide/installers.html
and here: http://download.oracle.com/docs/cd/E14148_01/wlcp/ocsg41_otn/installguide/domainconfiguration.html
are outdated!
I already have Weblogic SIP Server installed because I was working on it and now I would like to install OCSG and, very important, configure it!
Anyone have a tutorial updated or some advices to me? I'm becoming desperated because of this configuration!
Thanks,
Raquel

I would not be looking at 2009 instructions knowing that current build instructions, release notes, and other information were present, either online, or within the source distribution. In the preceding hyperlink, you will note that build instructions for OS X (any version) are simply omitted. Dependencies are discussed, such as needing the automake tools.
I would take a closer look at current build requirements (including arguments to ./configure), and build log — as an underlying reason why install hangs in your terminal.

How to install Flex Builder?

I would like to start using Flex. But I have big problems when trying to install Flex Builder 3. I already have Eclipse (Ganymede, 3.4) installed on my Windows Vista machine so I tried to install the Eclipse plugin, but I got these dependency pronblems:
Cannot complete the request. See the details.
Unsatisfied dependency: [com.adobe.flexbuilder.debug.e32 3.0.214193] requiredCapability: osgi.bundle/org.eclipse.debug.ui/[3.2.0,3.3.0)
Cannot find a solution where both Match[requiredCapability: osgi.bundle/org.eclipse.debug.ui/[3.3.100,4.0.0)] and Match[requiredCapability: osgi.bundle/org.eclipse.debug.ui/[3.2.0,3.3.0)] can be satisfied.
Cannot find a solution where both Match[requiredCapability: osgi.bundle/org.eclipse.debug.ui/[3.3.100,4.0.0)] and Match[requiredCapability: osgi.bundle/org.eclipse.debug.ui/[3.2.0,3.3.0)] can be satisfied.
Cannot find a solution where both Match[requiredCapability: osgi.bundle/org.eclipse.debug.ui/[3.3.100,4.0.0)] and Match[requiredCapability: osgi.bundle/org.eclipse.debug.ui/[3.2.0,3.3.0)] can be satisfied.
Cannot find a solution where both Match[requiredCapability: osgi.bundle/org.eclipse.debug.ui/[3.3.100,4.0.0)] and Match[requiredCapability: osgi.bundle/org.eclipse.debug.ui/[3.2.0,3.3.0)] can be satisfied.
Unsatisfied dependency: [org.eclipse.platform.feature.group 3.4.1.r341_v20080731-9I96EiDElYevwz-p1bP5z-NlAaP7vtX6Utotqsu] requiredCapability: org.eclipse.equinox.p2.iu/org.eclipse.help.feature.group/[1.0.1.R34x_v20080827-7r7xEIxEI6 Zu5nEqN7M3UBpglaat,1.0.1.R34x_v20080827-7r7xEIxEI6Zu5nEqN7M3UBpglaat]
Unsatisfied dependency: [com.adobe.flexbuilder.debug.e32 3.0.214193] requiredCapability: osgi.bundle/org.eclipse.debug.ui/[3.2.0,3.3.0)
Unsatisfied dependency: [org.eclipse.platform.ide 3.4.0.M20080911-1700] requiredCapability: org.eclipse.equinox.p2.iu/org.eclipse.platform.feature.group/[3.4.1.r341_v20080731-9I96Ei DElYevwz-p1bP5z-NlAaP7vtX6Utotqsu,3.4.1.r341_v20080731-9I96EiDElYevwz-p1bP5z-NlAaP7vtX6Uto tqsu]
Unsatisfied dependency: [com.adobe.flexbuilder.feature.core.feature.group 3.0.214193] requiredCapability: org.eclipse.equinox.p2.iu/com.adobe.flexbuilder.debug.e32/[3.0.214193,3.0.214193]
Unsatisfied dependency: [org.eclipse.rcp.feature.group 3.4.100.r341_v20080814-989JESIEdAciFYfkZZsBfSwQ2341] requiredCapability: org.eclipse.equinox.p2.iu/org.eclipse.ui.workbench/[3.4.1.M20080827-0800a,3.4.1.M20080827 -0800a]
Unsatisfied dependency: [org.eclipse.help.feature.group 1.0.1.R34x_v20080827-7r7xEIxEI6Zu5nEqN7M3UBpglaat] requiredCapability: org.eclipse.equinox.p2.iu/org.eclipse.rcp.feature.group/[3.4.100.r341_v20080814-989JESIEd AciFYfkZZsBfSwQ2341,3.4.100.r341_v20080814-989JESIEdAciFYfkZZsBfSwQ2341]
Unsatisfied dependency: [com.adobe.flexbuilder.feature.core.nl1.feature.group 3.0.214193] requiredCapability: org.eclipse.equinox.p2.iu/com.adobe.flexbuilder.feature.core.feature.group/[3.0.214193,3. 0.214193]
And after that I tried to install Flex Builder 3 standalone, but that worked even worse, It just created two empty folders! How to solve all these problems?

Read the Flex Builder release notes and installation instructions.
Sincerely,
Michael
El 17/05/2009, a las 14:14, JPettersson <[email protected]> escribió:
>
Okey!
>
I tried again. This time I started with downloading a clean copy of
Eclipse and installed it in a new folder, then downloaded a clean
copy of the Flex plugin and saved it in a new folder. It did not
work that much better this time. The errors was the following:
>
>
Cannot complete the request. See the details.
Unsatisfied dependency:
requiredCapability: osgi.bundle/org.eclipse.debug.ui/[3.2.0,3.3.0)
Unsatisfied dependency:
requiredCapability: osgi.bundle/org.eclipse.debug.ui/[3.2.0,3.3.0)
Unsatisfied dependency:
requiredCapability: org.eclipse.equinox.p2.iu/
com.adobe.flexbuilder.debug.e32/[3.0.214193,3.0.21419 3]
Unsatisfied dependency:
requiredCapability: org.eclipse.equinox.p2.iu/
com.adobe.flexbuilder.feature.core.feature.group/[3.0 .214193,3.0.214193
>
I think Flex is'nt compatible with the newest Eclipse version, and I
don't know where I can get an old version of Eclipse.
>

Install and build instructions

Similar Messages

Maybe you are looking for