Install and Configure Nexus 1000V

Hi all !! Hope everyone is well !!
I just purchase 2 Nexus 1000V's. Could someone give me some guidance on how to go about installing / configuring a Nexus 1000V switch ? This is my first time working with Nexus series switches. Thanks in advance !!!
D.

Hi,
Here are some of the documents and video links that will help you to proceed futher with Nexus 1000v installation:
http://www.cciemachine.com/en/US/products/ps9902/prod_installation_guides_list.html
http://www.google.co.in/search?q=nexus+1000v+installation&hl=en&client=firefox-a&hs=Hnt&rls=org.mozilla:en-US:official&prmd=v&source=univ&tbs=vid:1&tbo=u&ei=WtloTI6hAc-rcbb98I8F&sa=X&oi=video_result_group&ct=title&resnum=4&ved=0CCwQqwQwAw

Similar Messages

Install and configure report service on Oracle Application Server 10g

i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
Thanks

the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
what is the other choices that oracle supports that can help us in this case ???

Install and configuration on the SharePoint server 2007 issue

Hi All,
           I have Microsoft Sharepoint 2007 on Windows 2003 and I am trying to Integrate Adobe Lifecycle Rights Management Server which is on Windows 2008 R2 server.
          I am trying to Install and configuration on the SharePoint server 2007 but during installation getting error "Failure adding assembly to the cache: Unknown Error"
Please check the Edited install.bat file and error log.
Install.bat
set _my_datetime=%date% %time%
@echo on
echo Begin Installation at %_my_datetime%
echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
@echo off
@SET GACUTILEXE="C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\gacutil.exe"
@SET TEMPLATEDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE"
@SET RESOURCESDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\Resources"
@SET WEBAPPDIR="C:\Inetpub\wwwroot\wss\VirtualDirectories\80"
@SET SITEURL="http://sharepoint7:80/sites/DCADC"
@SET STSADM="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.EXE"
REM      cd $(ProjectDir)
%GACUTILEXE% /nologo /i AdobeLCSharepoint.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleConnector.dll /f
%GACUTILEXE% /nologo /i AdobeLiveCycleWorkflow.dll /f
pushd %TEMPLATEDIR%\features
      Echo Deactivating LiveCycle Connector feature with WSS
      %STSADM% -o deactivatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
      Echo Deactivating LiveCycle Workflow feature with WSS
      %STSADM% -o deactivatefeature -name LiveCycle/Workflow -url %SITEURL% -force
      Echo Uninstalling LiveCycle Connector with WSS
      %STSADM% -o uninstallfeature -filename LiveCycle\feature.xml -force
      Echo Uninstalling LiveCycle Workflow with WSS
      %STSADM% -o uninstallfeature -name LiveCycle/Workflow -force
popd
      Echo Copying source files to WSS \TEMPLATE directory
      xcopy TEMPLATE %TEMPLATEDIR% /e /y /i
      Echo Copying Feature Resource files to WSS 12\Resources directory
      xcopy Resources %RESOURCESDIR% /e /y /i
      Echo Copying Resource files to %WEBAPPDIR%\App_GlobalResources directory
      xcopy App_GlobalResources %WEBAPPDIR%\App_GlobalResources /e /y /i
pushd %TEMPLATEDIR%\features
      Echo Installing LiveCycle Connector with WSS
      %STSADM% -o installfeature -filename LiveCycle\feature.xml -force
      Echo Installing LiveCycle Workflow with WSS
      %STSADM% -o installfeature -name LiveCycle/Workflow -force
      Echo Activating LiveCycle Connector with WSS
      %STSADM% -o activatefeature -filename LiveCycle\feature.xml -url %SITEURL% -force
      Echo Activating LiveCycle Workflow with WSS
      %STSADM% -o activatefeature -name LiveCycle/Workflow -url %SITEURL% -force
popd
      Echo Restarting IIS worker process
      IISRESET
set _my_datetime=%date% %time%
@echo on
echo End Installation at %_my_datetime%
@echo off
Error Log
E:\Adobe LiveCycle Connector-2007>set _my_datetime=Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo Begin Installation at Wed 08/22/2012 14:40:28.27
Begin Installation at Wed 08/22/2012 14:40:28.27
E:\Adobe LiveCycle Connector-2007>echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
"Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Failure adding assembly to the cache: Unknown Error
Deactivating LiveCycle Connector feature with WSS
Operation completed successfully.
Deactivating LiveCycle Workflow feature with WSS
Operation completed successfully.
Uninstalling LiveCycle Connector with WSS
Operation completed successfully.
Uninstalling LiveCycle Workflow with WSS
Operation completed successfully.
Copying source files to WSS \TEMPLATE directory
TEMPLATE\FEATURES\LiveCycle\Elements.xml
TEMPLATE\FEATURES\LiveCycle\Feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\feature.xml
TEMPLATE\FEATURES\LiveCycle\Workflow\workflow.xml
TEMPLATE\IMAGES\LiveCycle\applyPolicy.png
TEMPLATE\IMAGES\LiveCycle\applyReaderExtn.png
TEMPLATE\IMAGES\LiveCycle\createPdf.png
TEMPLATE\IMAGES\LiveCycle\liveCycle.gif
TEMPLATE\IMAGES\LiveCycle\pdficon_small.gif
TEMPLATE\LAYOUTS\LiveCycle\ApplyPolicy.aspx
TEMPLATE\LAYOUTS\LiveCycle\ApplyReaderExtensions.aspx
TEMPLATE\LAYOUTS\LiveCycle\GeneratePDF.aspx
TEMPLATE\LAYOUTS\LiveCycle\InvokeGenericProcess.aspx
TEMPLATE\LAYOUTS\LiveCycle\LiveCycleSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\LoggingSettings.aspx
TEMPLATE\LAYOUTS\LiveCycle\Workflow\LCWorkflowSettings.aspx
16 File(s) copied
Copying Feature Resource files to WSS 12\Resources directory
Resources\AdobeLiveCycleConnectorCore.de-DE.resx
Resources\AdobeLiveCycleConnectorCore.de.resx
Resources\AdobeLiveCycleConnectorCore.en-US.resx
Resources\AdobeLiveCycleConnectorCore.en.resx
Resources\AdobeLiveCycleConnectorCore.fr-FR.resx
Resources\AdobeLiveCycleConnectorCore.fr.resx
Resources\AdobeLiveCycleConnectorCore.ja-JP.resx
Resources\AdobeLiveCycleConnectorCore.ja.resx
Resources\AdobeLiveCycleConnectorCore.resx
9 File(s) copied
Copying Resource files to "C:\Inetpub\wwwroot\wss\VirtualDirectories\80"\App_GlobalResources directory
App_GlobalResources\AdobeLiveCycleConnector.de-DE.resx
App_GlobalResources\AdobeLiveCycleConnector.de.resx
App_GlobalResources\AdobeLiveCycleConnector.en-US.resx
App_GlobalResources\AdobeLiveCycleConnector.en.resx
App_GlobalResources\AdobeLiveCycleConnector.fr-FR.resx
App_GlobalResources\AdobeLiveCycleConnector.fr.resx
App_GlobalResources\AdobeLiveCycleConnector.ja-JP.resx
App_GlobalResources\AdobeLiveCycleConnector.ja.resx
App_GlobalResources\AdobeLiveCycleConnector.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de-DE.resx
App_GlobalResources\AdobeLiveCycleWorkflow.de.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en-US.resx
App_GlobalResources\AdobeLiveCycleWorkflow.en.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr-FR.resx
App_GlobalResources\AdobeLiveCycleWorkflow.fr.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja-JP.resx
App_GlobalResources\AdobeLiveCycleWorkflow.ja.resx
App_GlobalResources\AdobeLiveCycleWorkflow.resx
18 File(s) copied
Installing LiveCycle Connector with WSS
Operation completed successfully.
Installing LiveCycle Workflow with WSS
Operation completed successfully.
Activating LiveCycle Connector with WSS
Operation completed successfully.
Activating LiveCycle Workflow with WSS
Operation completed successfully.
Restarting IIS worker process
Attempting stop...
Internet services successfully stopped
Attempting start...
Internet services successfully restarted
E:\Adobe LiveCycle Connector-2007>echo End Installation at Wed 08/22/2012 14:41:00.29
End Installation at Wed 08/22/2012 14:41:00.29
Waiting...
Regards,
Amol Sahare

This might be an issue with the gacutil that you are using. I have used the gacutil that comes with Microsoft SDK.
You can install Microsoft SDK from http://www.microsoft.com/en-us/download/details.aspx?id=3138

How to install and configure Business objects on a local Maschine

Hi Experts,
i am a newbi in BO and would like to work with BO.
The first thing i learned was to install and configure BO on my notebook.
I downloaded the followings Tools:
- CR Report 2008
- Integration Kit
- Live office 3.1 Upgrade
- Web Intelligence
- XCelsius
By trying to download - Query as a Webservice i saw there were with sequences 1-3. Which one should i donwload?
1. I would like to know which logic to follow toinstall it.Which one should be the firt and which one the last.
2. Before installing Query as a webservice i should first install:
    - BusinessObjects XI Release 2 SP2 Enterprise Edition
    - Web Services--> What is that and where could i download it?
    - Tomcat or another supported Web Application and JDK--> where can i download it?
3. .What is NET 1.1? Where to download it and how to install it?
Any information or expereince will be very appreciated.
Thank you in advance for your Input.
Pat
Edited by: Gilo on Feb 1, 2009 12:25 AM

Hi Pat,
            You can get the guides and Installtion guides from this
http://help.sap.com/businessobject/product_guides/
You can download the from
.subscribenet.com
you can enter the user name and password then you can download the Business Objects software that can be download.
"By trying to download - Query as a Webservice i saw there were with sequences 1-3. Which one should i donwload? "
Sequence 1-3 you will have to download all the 3 as it can be part 1 part 2 and part 3.
Tomcat .If you are installing for the first time it will automatically install tomcat and JDK if you are connected to the net while installing Business Objects.
Regards
Prashant

INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes.

Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
Below are details of my pc.
OS Name    Microsoft Windows 7 Professional
Version    6.1.7601 Service Pack 1 Build 7601
Other OS Description     Not Available
OS Manufacturer    Microsoft Corporation
System Name   ...........-HP
System Manufacturer    Hewlett-Packard
System Model    HP ProBook 4530s
System Type    x64-based PC
Processor    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date    Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
SMBIOS Version    2.6
Windows Directory    C:\windows
System Directory    C:\windows\system32
Boot Device    \Device\HarddiskVolume1
Locale    United Kingdom
Hardware Abstraction Layer    Version = "6.1.7601.17514"
User Name    ...........-HP\................
Time Zone    South Africa Standard Time
Installed Physical Memory (RAM)    4.00 GB
Total Physical Memory    3.94 GB
Available Physical Memory    1.00 GB
Total Virtual Memory    7.87 GB
Available Virtual Memory    1.25 GB
Page File Space    3.94 GB
Page File    C:\pagefile.sys

To clarify further.... It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine. In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows. If you are using a 64bit OS, you must install the 64bit software. Again, this would include Forms/Reports, WLS, and JDK

What are the prerequisites to install and configure Oracle Coherence 3.4

What are the prerequisites to install and configure an Oracle Coherence (3.4 Grid version) on RHEL5.0 system?
I want to make an Oracle Coherence Gid Data system for testing purpose using 3 machines.
What kind of network configuration is OK?
What software should be installed in advance？
Thank you

Hi,
I would read through the Testing and Tuning section of the following page.
http://coherence.oracle.com/display/COH34UG/Usage+(Full)
Even though you are not about to go into production I think the Production Checklist has some very useful information.
http://coherence.oracle.com/display/COH34UG/Production+Checklist
-Dave

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

How to install and configure configure IGS for J2EE server 700

Hi,
Please help me in installing and configuring IGS for J2EE server700 as i need it to run Business Graphics for my Web DynPro application. Earlier i had installed J2EE server 640 and i didnt have to do any separate installation for IGS. I just had to configure the IGS URL from Visual Admin. But i can't find any igswd.exe running on my J2EE700 engine.
Please let me know the procedure for this.
Thanks an Regards,
Smriti.

Hi,
Check the below link,
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/17/86c039c7811f11e10000000a114084/frameset.htm">About IGS Configuration and Adminisatration</a>
Regards,
Suresh.T

How to install and configure SNMP through a script(shell script/power shell/python)

Hi all,
I need a script so that once it is run on windows 2012 server r2 ,snmp should be installed and configured automatically ,giving minimum user inputs.Things like snmp server ip,community string shouls be configured.
SNMP services should be up and running with the script

Hi,
Please check if you can use
Install-WindowsFeature PowerShell command to enable SNMP. Meanwhile, please also refer to following article and check if can help you.
How
to Install SNMP Remotely
However, based on your description, the issue seems to be more related to script. I suggest that you should
post it in
Windows PowerShell forum or
Official Scripting Guys forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

How to install and configure ASM on Red Hat Linux 6.4

Hi Team,
How do you install and configure ASM on Red Hat Linux 6.4?
Thank you in advance.
Bee

Here is an article that you may find useful http://eriglen.blogspot.com/2013/01/step-by-step-configuring-automatic-storage-management-on-standalone-server-with-oracle-enterprise-linux-and-oracle-11g-R2-using-external-storage-managed-by-openfiler.html

How to install and configure smtp on iis 7 on windows 7

how to install and configure smtp on iis 7 on windows 7?
Thanks!

Here is an article that you may find useful http://eriglen.blogspot.com/2013/01/step-by-step-configuring-automatic-storage-management-on-standalone-server-with-oracle-enterprise-linux-and-oracle-11g-R2-using-external-storage-managed-by-openfiler.html

How to install and configure Eclipse???

Can any one guide me how to install and configure Eclipse to use it with jdk 1.5??

how to install eclipse?
you don't need to install eclipse just extract it to a specific path...
install j2se 1.5 then eclipse will automatically detect it...

How to install and configure oracle secure backup(osb-10.4.0.3.0_linux.x64) in linux

Hello,
We are planning to install and configure Oracle Secure Backup Version 10.4 in Linux server. I had searched documents and i have not find any relevant steps to install and configure in OEL 6.2.
Can anyone please suggest me how to install and configure OSB.
Regards,
Anil

Hi
Installing OSB on Oracle Linux is just the same as installing on any other supported linux and is described in Installation and Configuration guide. Just stick with the directories and procedure described in install guide and you should be fine.
For media server choose a physical host due to performance considerations. I think it is mentioned in docs somewhere.
Regards,
Mitja

How to install and Configure sharepoint foundation on administrator account ??

Hi there guys dev
I want to try sharepoint foundation for first time .
I installed windows server 2012 ans sql server 2012 and then installed sharepoint foundation 2013 .
now when I want to create a new server farm enter my windows name as database name and then enter my administrator account name as username ans it's passwors as password but after then when I click on next to create new server farm give this error :
"the administrator account can't use for new server "
please help how can I create a new server farm with administrator account .
I don't want to create it with the active directory domain and add new forest and create it with my domain name ?
if does it a way to create a new server farm with administrator account so please help to create it ?
thanks dear
Great Regards :
Raha
whit the best regard : Raha

Hi Raha,
According to your description, my understanding is that you got an error when you created a new farm with the administrator account by runnning configuration wizard.
Is the SQL Server installed in the server that hosted SharePoint 2013 Foudation? If not, please make sure the server hosted SQL Server has the same account with the server hosted SharePoint 2013 Foudation.
Please run the SharePoint 2013 Products Configuration wizard with ‘Run as administrator’.When you entered the user’s name, please use the format ‘domain\user_name’.
In addition, please check the log file to find more information about this issue. The path is : C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
Also , you can use Event Viewer to find the log by Start->Run->event viewer.
Here is an article for installing and configuring SharePoint 2013, please take a look at:
http://sharepointv15.wordpress.com/2012/07/19/installing-sharepoint-2013-preview/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Install and Configure Nexus 1000V

Similar Messages

Maybe you are looking for