Install and run Oracle 9i on WinXP Prof

I have downloaded and installed Oracle 9i (I picked the one that said XP, and was on three zip-files).
After figuring out, that it was impossible to just double-click setup.exe, I had to start it from Command-prompt..
The installation went nearly ok.
Oracle went into a "test-fase" and upon testing "Database Configuration Assistant"
I got the following error message:
Invalid entry size, expected 419438592 but got 419438599
The rest of the tests were ok.
Now, I am NOT really used to installing Oracle anywhere, I just use Oracle with selects... So, I dont really know if mentioned error is a problem?
Anyway, how do I start the Oracle database? I have a Win98 machine, where i have a "Start database" and "Stop database" entry in Start->programs->oracle->administration
Any help is appreciated

Hi
I receive the following error message when trying to launch dbca from the command line, and had tried to follow the advice from the previous thread. Please assist.
E:\oracle\ora92\bin>dbca
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/bali/share/so
t/Comparator
at oracle.sysman.assistants.dbca.backend.Host.<init>(Host.java:425)
at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:151)
at oracle.sysman.assistants.dbca.ui.InteractiveHost.<init>(InteractiveH
st.java:54)
at oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:127)
at oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:82)
at oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:143)
E:\oracle\ora92\bin>dbca

Similar Messages

Installing and Running Oracle 10g Express Edition on Microsoft Vista

My computer is running on Microsoft Vista.
I downloaded Oracle 10g Express Edition for Vista.
I ran the setup.exe. Everything went well there.
But, when I open the SQLPlus program, a window prompts me to enter my username, password and host string.
Can someone please tell me what it is expecting for these fields? I am using the same username and password I used to create my Oracle account.
But what is the host string?
Appreciate it.
Thanks.

This may help
http://sites.google.com/site/delphibasics/home/delphibasicsarticles/installingoracledatabase10gexpresseditiononwindowsvista
Check out the section "Access demonstration data"
Also this is not the best place to post a question of this nature. This might be better :
Database Installation
Best Regards
mseberg

Need to install and run Reports & Forms on Windows 98. Help!!

Hi guys !!
I need to install and run Oracle Reports & Forms on a Windows 98 OS. I can find the download of Reports & Forms for NT but I'm not sure if this download works on Win98 ?? Please help. Urgent.

Hi guys !!
I need to install and run Oracle Reports & Forms on a Windows 98 OS. I can find the download of Reports & Forms for NT but I'm not sure if this download works on Win98 ?? Please help. Urgent. I am having the same problem, but with Windows ME. I was able to get Oracle 8i to work by entering a line in the Compatibility 95 section of my win.ini, and I installed the Forms & Reports for NT, but it won't see my database.

Oracle9iDS form not Runing Do you want to install and run

Do you want to install and run
Oracle Jinitiator signed on 4.18/2002
error i already start oc4j instance but there
shows
test mode: false

Hi,
can you be more explicit about the problem. The information you provide is not very helpful to identify the issue.
Frank

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Installing and running Endeca on Crunchbang (#!)

Greetings-
I am trying to install and run Endeca on my Crunchbang system [see below for distro details] .
I finished installing packages and deploying a sample application from deployment_template successfully. However the initialize_service.sh fails.
Please help me if you can figure out where I might be going wrong.
The following are the steps I followed:
I downloaded the following packages from this link https://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=16289751
V33316-01 Oracle Endeca Platform Services 6.1.3 for Linux x86-64
V37711-01 Oracle Endeca Content Acquisition System 3.1.2 for Linux x86-64
V37714-01 Oracle Endeca MDEX Engine 6.4.1 for Linux x86-64
V37716-01 Oracle Endeca Tools and Frameworks with Experience Manager 3.1.2 for Linux x86-64
The Oracle Endeca Commerce Compatibility Matrix, January 17, 2013 does not advise on the above versions.
I ran the installation scripts and used default settings, as advised, when prompted.
All package installation is in "/usr/local/endeca/" which has four subdirectories viz.
CAS
MDEX
PlatformServices
ToolsAndFramework
$ENDECA_ROOT is /usr/local/endeca/PlatformServices/6.1.3
I tried to install the sample application from the deployment using deploy.sh
/usr/local/endeca/ToolsAndFramework/3.1.2/deployment_template/bin/deploy.sh
The installation succeeded, with defaults, the application was deployed in "/home/my_username/endeca/apps/"
The initialize_services script gives the following error:
my_username@crunchbang:~/endeca/apps/MyApp2/control$ ./initialize_services.sh
./initialize_services.sh: 11: [: unexpected operator
Setting EAC provisioning and performing initial setup...
[07.13.13 17:09:39] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[07.13.13 17:09:39] INFO: Setting definition for application 'MyApp2'.
[07.13.13 17:09:39] SEVERE: Caught an exception while checking provisioning.
Caused by com.endeca.soleng.eac.toolkit.exception.EacCommunicationException
com.endeca.soleng.eac.toolkit.application.Application setDefinition - Caught exception while defining application 'MyApp2'.
Caused by com.endeca.eac.client.EACFault
sun.reflect.NativeConstructorAccessorImpl newInstance0 - null
In addition the above:
http://crunchbang:8006/ifcr/admin.html
works for both "crunchbang" as well as "localhost" i.e it takes me to the WorkBench with "User Management" and "EAC Connection Settings" showing.
http://localhost:8006/endeca_jspref/controller.jsp
however returns the following error on entering "localhost", "15000"
status >> invalid ENE location
ENEConnectionException
com.endeca.navigation.ENEConnectionException: Error establishing connection to retrieve Navigation Engine request 'http://localhost:15000/graph?node=0&offset=0&nbins=10&irversion=640'. Connection refused
Linux Distro
$ cat /etc/*-release
PRETTY_NAME="Debian GNU/Linux 7 (wheezy)"
NAME="Debian GNU/Linux"
VERSION_ID="7"
VERSION="7 (wheezy)"
ID=debian
ANSI_COLOR="1;31"
HOME_URL="http://www.debian.org/"
SUPPORT_URL="http://www.debian.org/support/"
BUG_REPORT_URL="http://bugs.debian.org/"

Does anyone know of a good telephone support firm that could
help me get everything working, including mySQL? Might be worth it.
Thanks

Is it possible to install and run RMAN remotely ?

Is it possible to install and run RMAN on a separate remote network-connected platform from the platform of the Oracle DB instance with which RMAN was initially installed without any additional licensing ?
I.e. is it possible to copy the RMAN executable and any required libraries to the remote platform and successfully run RMAN on the remote platform to backup the Oracle DB instance with which RMAN was initially installed without any additional licensing ?
This is using RMAN with a recovery catalogue in the target database control file.
Thanks,
Brett.

Hi Kostya,
Depends on what you mean. Default the SOA Suite installs a Oracle Lite database to use for hydration storage. So default there is no real database and therefore you can not install ApEx. But you can configure the SOA Suite to use a "normal" database, and then you can use ApEx.
Regards Pete

Installing and Learning Oracle 11i

I would like to install and learn Oracle on a personal basis. I have a PC with Windows 2000 Professional. Can Oracle 11i be installed on that? Or does it require Windows server?
Does Oracle DB, in order to run Oracle Apps also come with e-business suite, when you download from edelivery.oracle.com?
I am planning to install it on an external hard drive (My PC's internal hard drive is only 20GB). My PC is only having 256MB RAM and would be connecting to the external hard drive via a USB port (not USB2.0). Does anyone know, if I can run Oracle Apps on this configuration in a single user mode, with reasonable performance?
I am not an Apps DBA. Is it easy to install Oracle Apps on a PC?
Thanks
Mukesh

heres the check list...
- U can isntall it on Win2K pro.
- U cannot make it work with 256 MB RAM.. tooo less.. I have 1.5 GB with ok performance.
- U can actually install the stuff on the external HDD as long as it has a drive letter assigned to it.
- 60 GB external HDD is just bare min. to install and run Apps 11i. consider anything like 80 GB+. I prrefer atleast 2-3 HDD to span App Server, DB server etc.
- USB 1.1/1.0 is tooo slow to give any kind of performance.
Consider following requirements:
1. PC with atleast 1 GHz Processor
2. 1 GB RAM at least. ( I tried with 512 initially but had all sort of problems).
3. U can install it on any of Win2K, Win XP and I can show how to do it. Currently have it on XP Pro SP2.
4. Min 80 GB HDD if u plan to install Vision Demo Database or otherwise u wont understand a thing.
5. atleast 1-2 days dedicated to installation with Internet connection.
6. VC++ and MKS toolkit are other requirements, so have them before u attempt to install.
7.... most important... lost of "GUD LUCK" wishes.
gud luck.

Installing and Configuring Oracle Portal

http://oraclelabs.com/index.php/2010/08/30/installing-and-configuring-oracle-portal-forms-reports-and-discoverer/

Try running the diag.cmd and see for the log.If u cannot fig out just post the log too.

9iFS simply does not install and run on WIndows 2000

hello,
story so far ( sigh. )
1) install failed but ran ifssetup.bat to complete as per a previous thread suggestion
2) added log-on-as-batch privilege to administrator ( with which everything is installed and run )
3) from the EMWeb start node and launch domain work correctly, but start domain fails.
4) running ifslaunchdc.bat and ifslaunchnode.bat works fine, but ifsstartdomain.bat worked correctly before i rebooted the machine after installing the software, and from then on gives me the following error :
exception IFS-45002 unable to start domain controller,
exception IFS-21008 unable to connect to IFS service
exception IFS-32005 failed to get prepared statement etc
I have seen any number of people here post about this problem, but has any one got a solution !!!???
A number of people mention ensuring the domain controller is started with the correct account details. As i have installed everything as administrator and everything is run with administrator account, I fail to see how this can help. Any help very much appreciated.
I am finding it VERY difficult to understand why it is so problematic to install this software - even the installer fails to complete on a clean machine meeting all the oracle specified criteria.
Regards
Tom

Hi, I'm assuming you are using the Manual Install. Did you already Uninstall any current Flash Player version?
If not, download and SAVE to your Desktop the Uninstaller:
http://kb2.adobe.com/cps/141/tn_14157.html
Then download and SAVE to your Desktop the Installer:
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Use the EXE Installer for Windows and Internet Explorer. Use the EXE Installer for the plugin based browsers
Then use the Administrator Account and CLOSE all browser Windows. Disable any instant messenger service from the system tray.
Run the Uninstaller and reboot(restart) your computer.
Then Run the Installer and reboot.
That message appears because the IE browser window is open.
Thanks,
eidnolb

Is it possible to install and run Acrobat Standard or Pro on a Surface Pro 2 tablet?

Does anyone know if is possible install and run Acrobat Standard or Professional on a Surface Pro 2?
and, if is possible to use COM automation to fill AcroForms?
Thanks and regards,
Adolfo

Does it run regular Windows 8 (allowing you to install the same apps as older versions of Windows in the desktop) or does it run Windows 8 RT, where only apps from the Windows Store are allowed? It looks like regular Windows 8, in which case you can try out the free trial of Acrobat Pro.
If it works, the Acrobat SDK (separate download) has all developer information on Acrobat, and you need it (give up any idea you will find code ready for use on Google...)

Installing and running Arch linux on the new MacBook 2015

So Apple has just started taking orders for the new 2015 MacBook. You know --
the thinnest and lightest MacBook to date (even thinner than the MacBook Air),
with a 12 inch retina display, the Intel Core M processor, a single USB-C port,
and the new force touch trackpad.
I'm pretty sure there are a few people like me who'd like to buy this new
MacBook and then install and run Arch (or some other flavor of linux) on it.
But of course, this MacBook is in many ways very dissimilar to previous MacBook
Pros and MacBook Airs. So this thread is a shout out to likeminded individuals
who are willing to brave the odds and install Linux on this new machine, so we
can help each other figure out (and hopefully fix) the inevitable issues that
will arise when we venture into this uncharted territory!
I have a little bit of experience installing and running Arch on MacBook Pros
and other Apple computers, but I'm (very) far from being an expert. But based
on my limited experience, I think the following areas will pose the biggest
challenges to getting Linux properly up and running on the new MacBook:
1. Installation: it's possible that booting a live USB will fail. So we might
have to use a CD. Indeed, perhaps we may even have to build a special ISO
image for this laptop. And once the install is complete, EFI/EFISTUB booting
with/without refit/refind may or may not work. Also, installing a bootloader
(grub, gummiboot, etc.) for dual booting Mac OS X and Linux may be a
challenge. We might have to endure kernel panics and deal with cryptic error
messages while booting.
2. Wifi may or may not work reliably. We might have to do some tinkering with
different drivers, etc.
3. Battery life may not be very good. We might have to fix a few things here.
4. The HiDPI retina display may or may not work properly with specific window
managers/desktop environments. Fonts/icons might be too tiny, may not scale,
etc.
5. The new Force touch trackpad may not work out of the box. In fact, I'm
fairly sure the regular xf86-input-synaptics package won't play nice with
this trackpad. There may not be support for features like the trackpad's
haptic feedback, multi-finger gestures, pressure sensitivity, etc. Indeed,
this might actually take a while to get properly working under Linux.
6. I don't know if the new USB-C port will work out of the box. It may not
play nice with USB flash drives and other peripherals and there may be
issues with ehci/uhci/whatever.
I tried Googling around trying to learn as much as I could about the issues
above, but since the laptop is going on sale only today and most users are
probably not interested in running Linux on it, I came up quite empty. I think
many others on this forum might also have faced the same issue.
So here's an open invitation. Let's share our experiences trying to get linux
working on this laptop. If you buy this laptop and try to install Arch on
it, please let us know how it went! Even if some things work out of the box, it
might be useful for others to know, so please share.
And of course, if you have more information/gotchas: for example, if you
encountered and managed to fix one or more of the issues above, or you
encountered a problem that's not on the list above, or even if you tried
something and it didn't work out as expected, please post below. I'm sure this
will be a very big help to others trying to solve similar issues on the same
hardware. Thanks!

It would probably be beneficial to post the output of lsusb -vvvv and dmesg.
FS1RTG77 wrote:
2. Broadcom BCM4360 AirPort Extreme, not supported.
5. The new Force touch trackpad and keyboard, both SPI bus devices, do not work.
On 2, it may just be a case of needing firmware, my laptop has a BCM43602 card, and the firmware required has only just been added to the linux-firmware package. Prior to that I had to install it manually.
On 5, I'm wondering if you identified them as SPI devices by looking in OS X, I ask because my laptop categorises my keyboard and trackpad in the same way. But they are actually still both connected to the USB bus, and presumably using SPI as an interconnect between the keyboard/trackpad and the microcontroller that tie them together.

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Does any update help to install and run myFaces components?

Hi.
I have JSC trial. And didn't make update.
I can't install myFaces component library. Why?
Does any update help to install and run myFaces components, and other component library?
Thanks.

Hi,
The following thread could be of help for you:
http://swforum.sun.com/jive/thread.jspa?forumID=123&threadID=48666
Cheers :-)
Creator Team

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Install and run Oracle 9i on WinXP Prof

Similar Messages

Maybe you are looking for