Install and setup problem with Acrobat XI pro

I have downloaded the Acrobat XI Pro trial program, with no error messages. When I clisk on "setup.exe" the following error message appears, see screen shot :
"This patch package could not be opened. Verify that the patch package exixts and that you can access it, or contact the application vendor to verify that this is a valid Windose Installer patch package"
How do I get setup to start?

@Jeff -- Yes I did use theDownload assistant.  Down load completed and assistant started the insall.  Received the error message and install terminated. Searched for and found the install folder and have tried install by clicking on"setup.exe".  Have not tried a fresh download, did the MSI logging, see next reply.
@LeoAdobeX -- I renamed the file\folder path and eliminated all spaces. Clicked setup.exe and received same error message.
Enabled MSI logging and tried setup.exe, received same error message. Have posted 2 most recent MSI files and the setup.ini file. Here are the links:
https://workspaces.acrobat.com/?d=SxkkNEXK*bJLZnkDjFdWiQ
https://workspaces.acrobat.com/?d=Mdt6KyNSpBViV3h2ZC2pUg
https://workspaces.acrobat.com/?d=AOxVXVIBozy1XrFDwzljoQ
Thanks for your help. Will stand by,

Similar Messages

  • Embedded audio and video files with Acrobat x Pro

    Can an audio or video file be embedded in a document with Acrobat x Pro & opened with Adobe Reader xi?

    You can place video or sound files onto the pages of a PDF file using the Multimedia button on the Tools Pane > Content Panel. The result is called a Rich Media Annotation, and will play back on the desktop versions of Adobe Acrobat and Adobe Reader.
    The files have to be compatible with Flash Player, so videos need to be in H.264, FLV or F4V, and audio files in MP3.

  • Rights problem with Acrobat X pro and Windows 8.1

    We have bought a CS6 creative suite, including acrobat X. If we use the acrobat X in cooperation with windows 8.1, then we cannot delete or amend files without needing to save them under another name ....
    If we install the try out of acrobat XI, then we don't have these problems ....
    Message was edited by: WouterGS

    Hello,
    Yes we have done all updates that were still pending.
    After a few day, the acrobat XI gives the same problems ... so I uninstalled the XI try-out and installed the bought X pro version again .... also here all updates have been done ...We really don't know how to solve this ..
    We had the same configuration on a Windows XP and a Windows 7 pc, and there all went without these issues.
    I also have another Laptop with the same configuration Windows 8.1 + XI pro, and there we also don't have the issue ....

  • Problem with Acrobat X Pro 10.1.1 update (multiple installs)

    I updated my Acrobat X Pro to version 10.1.1 when first notified of the update. Since then I have been constantly bombarded with new updates are ready to install from the auto update downloader. I was fooled the first time when it re-installed the 10.1.1 update. In all I've now installed this same update at least 4 times trying to get rid of the update messages, but I'm still getting bombared with them. Something is wrong with this last update. Has anyone else experienced this problem? Anyone know how to stop this insanity? When I manually check for updates in Acrobat, it also says there are updates available. Thanks.

    Are you sure that Updater is trying to update Acrobat? What is the title of the Updater dialog?
    Do you have Reader installed? There is an issue with Updater where on the systems with 2 Readers of the same major versions, User gets prompted to update again.
    If you have 10.0.x Reader and 10.1.x Reader, you might be it.
    The fix is to uninstall all Readers and install latest one - should take about 20 minutes.
    If that does not help, search Forums for AdobeARM.exe and how to enable verbose logging for updater, than check for updates and provide AdobeARM.log file - I'll try to see what is wrong.
    Good luck.

  • Problem with Acrobat 8 Pro on a WIN 7 64bit system

    I have installed Acrobat 8 Pro and my Win 7 64bit machine and am having trouble printing web pages to pdf
    but can find no exact reason why the just hang in the spooler just saying they encountered an error.
    Any help with that?

    The updates may resolve the issue. To update you may have to go to ftp://ftp.adobe.com/pub/adobe/acrobat/win/ to get the updates and install them in order.

  • Shared review problems with Acrobat X Pro

    I have used Acrobat X Pro many times to create a shared review without any problems. Yesterday I went to share a few files for review and kept getting the error "could not save the shared review enabled pdf file." I googled this problem and have tried all suggestions I could find, but none really worked. I deleted and recreated the PDFs and eventually got 3 of the 4 documents to send (I have ABSOLUTELY no idea how) but can't get the last one to send. I keep getting the same error. I tried deleting and re-installing Acrobat. The file is not in the same location as my server. The only difference from the other 3 documents is the content. They were all generated the same way (SmartPDF in Altium). Any help would be greatly appreciated.

    Any tip or solution anyone, please?
    (While AdobeChatSupport was not direct about the problem)

  • Problem with Acrobat XL Pro

    Hi,
    I have Creative Cloud for teams (one year membership). I used the free trials first and downloaded the programs I needed afterwards. InDesing and Photoshp work normally but now I can´t open/use Acrobat XL Pro.
    I always get this notice that my trial time is over and I should register the program but when I use the serial number I have, the program doesn´t accept it. What can I do to make this XL Pro work?
    BR. Johanna

    Jodua have you removed Acrobat XI Professional and reinstalled using the installation files you received with your purchase?  Alternately if you have a Creative Cloud membership Acrobat XI Professional is currently included.  For information on how to install the Adobe Creative applications included with your membership please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • Installation problems with Acrobat XI Pro

    How do I install Acrobat XI Pro on my MacBook Air? I constantly get the message "installation failed".

    What type of download?
    Did it have ending of .dmg (pronounced Dim-edge)?
    Or .exe (execute)?
    If .exe you've downloaded the wrong version, Mac are based on FreeBSD UNIX any files end .exe is a foreign object.
    If that not the Issue.
    Try redwnloading the installer.
    Now that you have redowloaded
    Restart the Computer in SafeMode (Hold shift key down while restarting computer)
    After Progress bar disappears and your asked to sign with your username and password and finished load then try the installer.

  • Serial number problem with Acrobat 9 Pro

    I removed Adobe Acrobat 9 Pro from a workstation and determined later that I didn't have the CDs with the serial number to reinstall.  I did not check the option for it to remove the serial number when I unisntalled so I am hopeful that it is stored somewhere in the registry.  I have looked there myself but haven't seen anything in the obvious places.  Does anyone know where the serial number is stored?
    Thanks!!

    swejo;vnwvonwotbn wrote:
    Yeah, sorry should have mentioned that.  It wasn't registered.  We don't have the receipt for Adobe to look it up too.
    Sorry. Sounds like you just threw your money away.

  • Font problem with Acrobat 8 Pro

    When I print to pdf using Acrobat 8 Pro, I find that the fonts don't always look the same in the created pdf file as they do in the original document (whether created in Pages or Word). They look a little squished or altered slightly in a way that isn't as smooth as the original. And I'm not even using rare fonts but ones like Arial.
    However when I open these pdf files in Preview the fonts look the same as the original. And when I open them in Reader on a PC they still look as bad as when viewing in Acrobat on the Mac.
    I've tried adjusting the settings in Distiller and have printed the pdf files using a high quality setting that embeds all fonts and still the fonts come out looking not quite right.
    This has been very frustrating to me as I never had this type of problem when using Acrobat on Windows before. The pdf files always came out exactly like the original source document. Is there something different about Acrobat on a Mac or is there a setting or something else I can fix?
    I'm running OS X 10.5.4 on a Macbook Pro.

    Have you checked the font embedding inside File / Properties / Fonts /?
    Are they set to embed or not since High Quality DOES embed the fonts ...
    Jon

  • Download problem with Acrobat XI Pro for MAC

    I purchased Acrobat XI full for MAC download, but when I click download I keep getting plug-in failure. Using Safari, already tried downloading and installing the latest version of flash player and that did not help.

    Hi jmp123456789,
    Alternatively you can try downloading it from the direct download links available at : http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html
    But make sure you follow the important steps mentioned on the page before initiating the download.

  • General install and deployment problem with WLS clustering on two boxes

    Hi,
    I've come across a general installation problem with WLS with a cluster spanning two different physical machines and two Managed Servers, one Managed Server per physical machine.
    The problem is, starting from scratch, you install WLS on both physical machines. You can then use the config wizard to create the domain, cluster and managed servers, but this is a manual typing in process.
    So we've now got a WLST Script which we run with "java weblogic.WLST domaincreate.py domain.properties". This is good as it creates the domain, cluster, managed servers and JMS modules.
    Now the trouble is, it doesn't do anything to the 2nd physical machine which will be running only the 2nd Managed Server.
    One dirty way to get around this in order to start the 2nd managed server was to copy the domain directory to the 2nd server, but I'm sure this is bad practice and what you can actually do is improve the WLST script to actually, but the same as the config wizard and dump the nessary information to the 2nd physical machine in order so you don't need to copy the domain directory across so that it will startup straight after running the WLST.
    Any help appriecated.
    Surfbum.

    Hi I think I've found the answer. You can build a managed server template using the pack command.
    http://e-docs.bea.com/common/docs90/pack/tasks.html

  • New GPU Quadro k5200 installed and having problem with my AE, PPro CS6  not using the GPUs cuda.

    Hi guys, I recently bought a workstation from BOXX tech with a new GPU Quadro k5200 installed in it.
    I am having problem with my AE, PPro CS6 using the GPUs cuda.
    I went to Nvidia Settings and use the specific App to select it to use GPU n- Quadro k5200. But still not working.
    Please help

    If you edited the Cudatextfile in the Adobe Premiere CS6 directory correctly then the acceleration should be enabled. The only way it it's not is if you have the wrong driver for that version of Adobe or did not edit the text file with the exact name of the card. You can use the GPUsniffer in that same Premiere directoy with the command prompt to see the name the GPU should be listed as. The Ray Tracer file in AE has to be edited with the same listing.
    Eric
    ADK

  • Problems with Acrobat 9 Pro

    I have Acrobat 9 Pro. All of a sudden, it no longer creates PDFs. Is Adobe no longer supporting this?
    I uninstalled and reinstalled the program. No luck. (It still reads PDFs though).
    If I upgrade to Acrobat XI, will that enable me to create PDFs?
    I don't also have to buy a monthly subscription, do I?

    Hi Cynthia,
    You should be able to create PDF's through Acrobat 9  as the functionality has not been taken off .
    On other hand , you can surely upgrade to ACrobat pro XI and that will surely lets you create the PDF's as well . To buy a prepetual license or a subscription would be upto you as you will have the option for either . Please use the link mentioned below to find out the pricing structure.
    http://www.adobe.com/uk/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_softw are_sl_acrobatcollection_uk.html
    Regards,
    Kartikay Sharma

  • Download problems with acrobat xi pro

    Tried downloading acrobat xi pro and error message says header length is too large. pls help. thx.

    That is a browser-specific message; try a different browser.
    Or a different download location https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

Maybe you are looking for

  • IMac 24 inch screen remains black

    Hi, iMac starts up in normal way but screen remains black. When I do Screen Sharing from my MacBook Pro I see there's nothing wrong with the iMac ... on my MacBook Pro the normal screen from my iMac is shown. Please some help? Many thanks, Johan

  • User exit for incoming PO - (PO is created by CIFing TLB order to R/3)

    Hi All,     I need to find out the APO INBOUND user exit for reciving the PO information from the connected R/3 system. Initially a TLB order is created in APO and CIFed to APO and after the PO is created in connected R/3 system this PO number and re

  • Can't find my aliases with iCloud.

    Had 5 aliases when I switched ti iCloud. Now my "accounts" indicate I have only three and even those three DON'T show on my accounts page. Since I moved my non-compatible MacBookPro to iCloud a couple weeks ago and received a validation eMail that my

  • SG300-53 bricked after reset?

    Hi We have a coupple of SG300-52 that we have lost our passwords for. So we have reset them by pushing the reset button for 30sec. The config is reset successfull because the ip changes to default (192.168.1.254).  However, on the web gui (and ssh) c

  • Why parition table is different between S10 3/05 and S10 6/06?

    I want to set up RAID 1 (mirroring) using the Solaris Volume Manager (SVM) on my Solaris 10 6/06 x86 machine. I have 2 identical Seagate 40GB HDD's (model ST340016A). The partition table on the primary disk was already defined by Solaris 10 3/05 OS b