Install assistance needed.

I used disk 1 instead of disk 2 to install Photoshop Elements 10 on my Windows 7. How do I correct this? Uninstall options tells me to deactivate and remove serial numbers and use on another computer. I need PSE 10 on this same computer. Please help!

Simply deactivate and uninstall. These options wil lreturn once you have installed with the other disk.
Mylenium

Similar Messages

Xcode Install Assistant can't be installed on Macintosh HD because Mac OS X version 10.7 or later is required.

I am a new user on a mac. I was given a mac to use for work and I need to install Ruby, Ruby on Rails. The Ruby install instructions said to install Xcode first.
The mac os x is 10.6.8. I had a problem trying to install xcode because it said the operatin system version was not compatible .. Then I found xcode version 4.2 but it then said "Xcode Install Assistant can't be installed on Macintosh HD because Mac OS X version 10.7 or later is required."

The message kind of says it all. It needs a more current version of the OS to install. Mavericks is free if your machine meets the specs for it.

How do you install Best Practices Install Assistant (BPIA)?

Hi
I've been looking into setting up Yard Management in our SAP system and have found documentation / software for ECC5 - fore this version it looks like I would need to install the Best Practices Wholesale Distribution Package with the necessary BC sets / eCatts from W70 Yard Management, and can use Best Practices Install Assistant (BPIA) which I think is installed via SAINT???
HOWEVER - I've just realised that the version of SAP to be installed on is only 6.20/4.7. I think Yard Management is still available for this release but doesn't look like Best Practices / BPIA is used - how is this installed and where can I find the documentation / software?
Cheers
Ross
Edited by: Ross Armstrong on Jun 18, 2008 9:00 AM

There are two option for downloading games or any application in BlackBerry device.
One
is using the OTA (Over the Air) link, provided by the application
owner, from where you can directely install games/application.
Another
is using Desktop Manager's Application Loader. In that case save the
game/application files in a folder of your PC/laptop. Use Application
Loader and find the location of the folder and click Open.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Trying to install HP Download and Install Assistant on my ASUS laptop

I'm trying to install the HP Download and Install Assistant, from the HP Support website, on my new ASUS laptop so that I can connect my HP Officejet 4500 printer to my computer. The application seems to download, but is hung up in the "installing" process. It has been running for over an hour without any resolution, saying it is still installing in the dialog window. I don't know how else to get my laptop to recognize and connect to this printer.

Hi,
What is your Officejet 4500 ? It must be G510something. You can download DIRECTLY, much quicker.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

Hi there,
Use the method described in the link below to get back up and running:
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
I hope this info helps!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

HELP! Going round in circles trying to establish my original Administrator's name and password in order to install much needed updates.

I am going around in circles trying to establish my original Administrator's name and password so that I can install much needed updates.
I have my User ID and password. Advice please!

Yet another update,
So I got an email back earlier from complaints as i said in previous post, as soon as i got back home from work I called it. Spoke to the first person who put me through to Options, again I told them my problems and they looked through my notes and told me that they couldn't help and transfered me to another department. I then went through all my issues yet again and again was told I needed to be transfered to another department to downgrade. I got put through to Options (where i'd previously been transfered from) this time I got told that they could downgrade me but need to speak to a different person in Options, so again transfered to someone else. This time they said that they will do it, started giving me the details of the new package and was just about to give me a date when they said that because of a technical issue with the way my account was set up they could not continue. Was then told that the order will be handed to the offline team and will be contacted (no time scale given). So annoyed right now!!!!!

I have an old mini running os x 10.4 . im about to upgrade to 10.6 (the highest this dinosaur will upgrade to) but i have a ton of music recording software installed and need to know if it will affect it . please help ? any of it

i have an old mini running os x 10.4 . i'm about to upgrade to 10.6 but have a ton of music and recording software installed and need to know if it will affect any thing i have installed . does newer garageband work with older gband files ?please help ??

Sorry about that, yes, 10.5 and 10.6 on Intel can run Firefox 4.
Here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
You could install Firefox 3.6 over Firefox 4 (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

WRT54G install HELP needed

I bought the WRT54G so I could go wireless in the house. I run the CD and it goes "do you want to replace your existing router or keep it?" Near as I know I DON'T HAVE ONE but that isn't an option, so which do I pick? There should be a "do you simply have a modem plugged into your PC and bought this go to wireless?" type option (something I'm betting is extremely common). Also, once you select one, you cannot go back and change your mind...you have to exit the program and start over. Which of these cryptic options do I choose??
(Mod note: Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 06-15-2009 07:12 AM

Disregard - got help from an online tech spt.
FWIW that install CD needs work, as it was detecting a router that doesn't exist and the tech spt explained that sometimes it is known not to work properly.
PS: in the interests of hopefully saving someone else the time and hassle I went thru, here are the steps I was given which worked fine:
1. Connect the PC to the port one of the router then restart it. (This PC should be the one that can get online if directly connected to the modem).
2. Go to your desktop and double click on Internet Explorer or any browser(Located on the Start Menu in Windows XP).
3. When the browser opens, type http://192.168.1.1 on the Address bar and click on Go or press the Enter key. The log-in window will appear.
4. Skip User Name and type admin on the Password field, and click OK.
5. Configure the wireless settings. Click on the Wireless tab and have these:
Wireless Configuration: Manual
Wireless Network Mode: Mixed
Wireless Network Name (SSID): Bill/Anything that you would want to name your network.
Wireless Channel: 1
Wireless SSID Broadcast: Enable
Save the settings.
6. To secure your wireless network, Please click on the Wireless security sub-tab that is still under the Wireless tab and change the Security mode to WEP and have these:
Default Transmit Key: 1
WEP Encryption: 64 bits 10 hex digits
Skip the Passphrase field. Do not click on the "Generate" button.
Enter any 10-digit value in the Key 1 box. (You may use all numbers but you can only use letters A to F. No dashes or slashes and special characters). This will be your WEP key (MINE: ssn123123)
Leave Key boxes 2-4 blank or empty.
Save the settings.
7. Click on the Setup tab, then click on the MAC Address Clone sub tab, enable it and click on "Clone your PC's MAC" then save the settings.
8. On the Setup Tab --> Basic Setup sub-tab, look for the LAN IP which is 192.168.1.1.
9. Change the IP address to 10.10.10.1 then save the settings.
10. Connect the modem to the router's Internet port and wired PCs to the router's numbered ports.
11. Power cycle. To do a power cycle, please power off the computer, the router and then the modem. After 2 minutes, power on the modem, the router and then, lastly, the computers. Wait for the lights to stabilize before plugging the next device.
Message Edited by Bill12344 on 06-16-2009 08:34 AM

I have the system "windows 8.1". When I try to install Photoshop Elements 9 I became the error Message; Photoshop can't be install, I need the Internet Explorer 4.0 or higher. The setup will be closed.

I have the system "windows 8.1". When I try to install Photoshop Elements 9 I became the error Message; Photoshop can't be install, I need the Internet Explorer 4.0 or higher. The setup will be closed.

There is a problem with IE10+ in that it is mistakenly seen as being IE1. To get around this either use a different browser or use compatibility view (http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-10)

How to re install illustrator I had to reset my PC and new install is needed (web download version)

Well that´s my question: How to re install illustrator I had to reset my PC and new install is needed (web download version)
eki555

Which version of Illustrator?
See Download and Installation Help

Bypassing Setup assistant and Install assistant

I am trying to do a command line / automated installation of Lion. I would like to know how to restore InstallESD.dmg or OSInstall.mpkg to a blank partition without the Install assistant. I would also like to know how to bypass the setup assistant after reboot.

I am willing to use Single-User mode for creating the first user account. However, before I can even get there, I am unable to bypass the Install Assistant (where it asks for the volume for the OS and agreement). I want to have this entire process automated, starting from the InstallLion.app in the Applications folder, ending with a brand new bootable OS. This is all to be done on a Mac Book Pro.
I tried -
1. asr restore --source InstallESD.dmg --target /Volumes/<target> - But this creates the equivalent of a bootable DVD.
Also tried -
2. installer --pkg OSInstall.mpkg --target /Volumes/<target> - This gives "There is nothing to be installed"
Thirdly, I tried
3. asr restore --source BaseSystem.dmg --target /Volumes/<target> and copied kernelcache, boot.efi and mach_kernel to /Volumes/<target> and added
<key> Kernel Cache <\key>
<string>\kernelcache<\string> to
/Volumes/<target>/Library/Preferences/SystemConfiguration/com.apple.Boot.plist
All of the above bring up Install Assistant. What I want to see is a bootable volume with a brand new, usable OS(Lion) on it.
Any help on this with be deeply appreciated.

SL install DVD needs to be repaired

First a little back story, i'm trying to update my Macbook Pro from Tiger to SL. Backed up to 1.5TB USB before I started (thankfully!) The first few tries I just tried to update and the installer stalled. Then tried to archive and install to no avail. Then tried erase and install and error came up stating couldn't be installed. So I put the DVD in my PPC mirror drive tower and ran Disk Utility and it gives an error:
Volume Header needs minor repair
The volume Mac OS X Install DVD needs to be repaired.
however it cannot be repaired. Can't copy it to my external to burn new. Also called Apple and since I don't have an Apple order number they can't help me (ordered the install disc off Amazon).
Is there any help any one can give me besides cut my losses and stay with Tiger that I pain-stakingly reinstalled back on my Macbook?
Thank you in advance,
Jason

Snow Leopard (OS 10.6.x) has no *Archive and Install* or *Erase & Install* option. There is only a single install option. The retail installer disc is white with a picture of a snow leopard on its lower section, a bold title that says "Mac OS X Snow Leopard" on the upper section, & the words "Install DVD" to the right in smaller lettering. Below that should be printed the version number it installs in still smaller grey type.
If the disc you got from an eBay seller offers *Archive and Install* or *Erase & Install* options, it is not a Snow Leopard disc. If the installer disc will start up a PPC Mac, it is not a Snow Leopard disc. If it is a black disc with an X on it, it is probably a Leopard (OS 10.5.x) disc. If it is a grey disc, it is a system-specific installer disc & will work only with the specific Mac model it was intended for.
If your disc looks like the one described in the first paragraph, except the lettering to the right says "Upgrade" or "CPU Drop-in DVD" instead of "Install DVD," it is a special Snow Leopard upgrade disc, not the retail version. If you have one of these discs, please let us know because they have special install requirements.
Assuming you have a genuine Snow Leopard retail disc, first make sure it is not scratched, which could prevent the installer from completing. Also make sure you have at least 1 GB of working memory installed in the MBP. or you will not be able to start it up from the Snow Leopard DVD.
Also note that you cannot repair a DVD, so a message like "The volume _Mac OS X Install DVD_ needs to be repaired" means you are not choosing the right item for Disk Utility to repair. Try starting up the MBP from the Snow Leopard installer disc (hold down the C key just after powering it up with the disc in the MBP & continue holding down the key until you see the Apple logo on the screen), then run Disk Utility from the Utilities menu, making sure you choose the internal HD for the repair & not the DVD.

Latest Flash Player installed, yet need to upgrade

Hi,
I am trying to run a 3D book on my Safari 7.0.1 installed on MAC OS X 10.9.1. I got an error:
Yet, when I am checking on Adobe's website, it looks like I have the latest version:
Any idea?
Thank you for your time.
Sebastian

Hello Mike,
Could this be possible to came from a 3D fliiping generator software I
have? When I created a FLA file and open it wit Flash CC, a message
appeared seing that AS2.0 is no longer supported and AS3.0 will be used.
Best regards,
Sebastian
Pe 24.02.2014 20:34, Mike M a scris:
>
Re: Latest Flash Player installed, yet need to upgrade
created by Mike M <http://forums.adobe.com/people/CFMcBlob> in
/Installing Flash Player/ - View the full discussion
<http://forums.adobe.com/message/6152339#6152339

HT1338 my old mac cant connect to internet and my migration assistant needs an upgrade is there any way to download to my new mac and install the upgrade on my old one so i can complete the migration process?

I just purchase a new IMac, I am trying to use migration assistant. the problem I am having is my old mac cannot connect to the internet and it needs a software update, can I download the update on my new mac and install it somehow on my old mac?

If it's a free update, search Apple's support site for it and move the dmg as you would any file. If it's a paid upgrade, no; the Mac App Store upgrades, while downloadable, can't be downloaded from a Mac which can't use them.
(78632)

Does ILM assistant need APEX to be installed?

To be able to use ILM assistant against my development database, do I need to install APEX into the same database? If yes, then does this mean that I will need to install APEX in every database which I want to use with ILM assistant?
Thanks

Yes you will need to install APEX in each database where you want to run the ILM Assistant because the ILM Assistant is actually an APEX application.
Lilian

Install assistance needed.

Similar Messages

Maybe you are looking for