Install BI Admin Cockpit

Hi Experts,
Can anyone tell me about ,"how to install BI Admin Cockpit"??????
Help me in this regard...answers will be rewarded.
Thanks in advance.
Shankar

Hi ,
Pls Chk these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80a466a9-ec4f-2a10-0dac-c1fe79cdf54e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ad214fe9-0c01-0010-4291-a629e5ba5f90
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
Hope this helps,
Regards
CSM Reddy

Similar Messages

BI Admin Cockpit process chains fail to install

Hi All,
I'm attempting to install and configure the BI Admin Cockpit on our BI Development system.
I've followed the steps outlined in the collective note, 965386.
When running transaction rstcc_inst_biac to install the Content for the BI Admin Cockpit, the background job RSTCC_ACTIVATE_ADMIN_COCKPIT cancelled with error message RS 062.
Regarding this, instructions from note 1039381 were used to clear table entries and I re-ran the job, this time successfully.
Checking slg1, the logs show no errors and only minor warnings and it can be seen via RSA1 that some Technical Content is in the Activated state.
However, when entering transaction RSPC to schedule the process chains, the screen is blank and it appears that the associated chains have not been installed.
Regarding this, note 1065249 has been checked:
<i>'This note needs to be applied only if SP level of software component BI_CONT is less than SP7 and SAP_BW is greater than or equal to SP13.'</i>
Our system is currently at the required SP levels, BW13 and BI_CONT SP7.
Any ideas on how to install the process chains would be very welcome.
Chris

I was able to install BI Admin Cockpit recently after multiple attempts. All process chains installed properly. There are still some minor issues but in general I was able to see the BI Stats reports. Here is the steps that I did:
System Info: SAP_BW 700 13, BI_CONT 703 5
1. Note 934848: Select only myself system in the TX:RSOR Source System
2. Note 834280: Installing technical BI Content after upgrade
3. Apply OSS note: 1039381, 1065249, 1044792
4. Note 965386: Activate tech content in IMG (SPRO) sequentially from Activate SAPI Data Sources ... to Activate Technical Content. Activating it sequentially will help identify which step is failing.
5. Activate Process Chains using txn RSOR Technical Content (0TCT*).
The process chains were installed but failed to be activated. Whe I double click on a process chain nothing was displayed but edit the process chain anyway and activate manually.
Good luck.
Tony

BI admin cockpit - how to install the BI content Web templates

Hi Gurus,
We have installed BI admin cockpit. we have also installed Bex required queries. now I wanted to install all web templates (SAP format 3.x) in BI content. after installing I checked WAD but I cannot see them their also when I go to metadata repository I cannot see templates, I only see this message:
"Object '0QUERY_TEMPLATE' (0QUERY_TEMPLATE) of type 'Web Template (Format SAP BW 3.x)' is not available in version 'A'"
Is it maybe we are on SAP 7.01, what would be the steps to install the web templates successfully?
thank you all for your help and have a nice day.
thank you

Hi Stefanie ,
If you have installed Admincockpit , then the corresponding web templates should be available in the system .
1. Anyways if the web-templates are missing , then try to run the admincockpit installation once more using the
tcode - RSTCC_INST_BIAC and check whether you get the webtempaltes in 'A' version or not .
2. If the webtemplates are still not available , then you can install them manually in tcode - RSORBCT.
a> Go to tcode - RSORBCT.
b> Locate the field Query Elements . Drill down to Query and then select "Select Objects".
c> In the new pop-up window , locate the "Business Information Warehouse" and then drill down to "BI Statistics".
d> You can find all the Statistics infoproviders under "BI Statistics" and the queries build upon them .
e> Select all the queries for a particular infoprovider and then select transfer .
f> After the required queries have been transferred to the third window , select the option 'DataFlow Before and AFterwards' under the Grouping Tab .
g> After the grouping has been done , you can check that the web templates associated with the query have been collected .
h> Then choose install .
i> Repeat these steps for all the Statistics infoproviders .
j> This will make all the statistics webtemplates available.
k> As the Statistics webtemplates are 3.x , you can execute them in SE38 report - RS_TEMPLATE_MAINTAIN for testing .
Regards,
Lokesh

BI Admin Cockpit - 0TCT_MD_C_FULL_P01 has Inactive Infopackages

Hi SDN,
Basis recently installed BI Admin cockpit for BI Statistics. I am running test loads using the process chains.
The Process chain Content Master Data (0TCT_MD_C_FULL_P01) is displaying as inactive. When i go into change mode, I notice that 4 infopackages are red (inactive). Here are the displaying error messages:
-Process variant LOADING 0PAK_BFYU3MMMU2T2WOI50MXHCEH07 does not exist in version A
-InfoPackage no longer exists in object version A in table RSLDPIO
-Variant '0PAK_BFYU3MMMU2T2WOI50MXHCEH07' of process type 'LOADING' not found in A version
How do I correct these errors? Do I have to go into table RSLDPIO and edit the table entries for the InfoPackage or do I need to reactive these Infopackages from BIC (RSA1->BIC)? I also see that there are notes 834280, 1069134, and 1008758 which deal with BI Admin Cockpick installation.
Thanks!

Hi Markus,
We're facing exactly the same issue under BI_CONT 747...
Trying to activate objects in error manually from Business Content.
(Re)Activate DataSource 0TCTIFAREA_TEXT and 0TCTAPPL_TEXT using RSA5 then Replicate and reactivate via RS_TRANSTRU_ACTIVATE_ALL.
Migrate to 7.x 0TCTIFAREA_TEXT and 0TCTAPPL_TEXT and restart the program RSTCT_ACTIVATEADMINCOCKPIT_NEW.
=> Log w/o any error.
But DTP_7KU36MOUFNCF0QSFCIHAD5VH9 and DTP_7KU36MOUFNCF0QSCQUJW97MB6 still not active and not reachable in BCT.
I have just found this SAP Note !
Note 1698234 - Report
RSTCT_ACTIVATEADMINCOCKPIT_NEW activation errors
Dispite these recommandations, the DTP_7KU36MOUFNCF0QSFCIHAD5VH9 and DTP_7KU36MOUFNCF0QSCQUJW97MB6 are missing in the BCT.
WorkAround --> Create your own DTPs and replace the bad ones in the Process Chain.
Regards,
Raphael

BI Admin Cockpit for InfoPackage

Hi SAP Gurus,
I have installed BI Admin Cockpit on BI 7.0 using SP13.
I executed one Info Package for testing purpose. I am comparing the data populated in 0TCT_MC23 that with the monitor tab. I observed that the data doesn't get populated in 0TCT_MC23 as expected.
Searched on Service.maketplace and found few SAP notes (1024908, 991093, 1001880, 1014146) which asks for implementing SP11 / SP13 as a resolution to the problem. However we are already on SP13.
Can anyone let me know the solution for this problem?
Awaiting your reply.
Regards,
Amanda.

Check any default filters in infopack
Check infoobjects newly used in this present flow with the infoobject used in 0BWTC_C05 . Any mismatch in the mapping or non active status of any infoobject can be checked

BI Admin Cockpit - Iview not displaying data

Hi
we recently installed BI admin cockpit and found out that the data is not showing in Iview different windows.
System admin -> Monitoring -> Business Intelligence -> Data load Status -> Infopackage statistics.
I could see 4 Iview windows but no display of information but If I click options and open in new window , I could see the statistics displayed.
How do I make the statistics displayed in the default window
thanks
Edited by: Bhat Vaidya on Aug 14, 2008 11:49 AM

Hi,
I applied SAP Note 972514 Empty BEx Web analyzer instead of BEx .
try it and let me know.
thanks

BI Admin Cockpit Show Which Users Ran Which Queries?

My org needs an idea of which users are running which queries, and how often. I'm looking at installing BI Admin Cockpit. The info I am finding indicates that Admin Cockpit is more about the runtime performance of queries and extractions. I'm not interested in that (much). Can anyone say whether installing Admin Cockpit and the Technical Content that goes along with it will answer who is running which queries?
Thanks.

Better to go for DBA Cockpit,which is acts like central instance to all the tools like
ST03 and RSTRACE,ST04,ST05.Where you can able to trac who is accessing the queries and what is data base performance and background job information.

BI Admin Cockpit: Program variant missing in Process chain

Hi,
I'm installing BI Admin Cockpit and have troubles with Process chains. I followed the installatin guide and had problems activating process chains: 0TCT_C2_INIT_P01 and 0TCT_MD_C_FULL_P01 because of missing InfoPackages. I solved this by installing an correction as it is described by Note: 1432353. After this I activate these Process chains manually in RSA1 Administration--> BI Content -->Process Chains (all necessary objects). No Problems occured. The Problem is when I'm start these Process chains, I get an error on the last step. There is an Abap Programm with an variant. This variant is missing in the System.
The Variants are:
- RSTCC_Dataload (0TCT_C2_INIT_P01)
- RSTCC_QRuntime (0TCT_MD_C_FULL_P01)
I tried also to get these Process chains with Dataflow before and after to view if I forgot anything to activate, but there is no programm variant. Can anybody explain, how to get these programm variants?
Thanks and greetings,
Sebastian

Sebastian,
I faced the same problem. Basically what I found was that variants were not defined. So I manually created the value for variants:
1. For RSTCC_DATALOAD assign value TCT_C2_DELTA_P01
2. For RSTCC_QRUNTIME assign value 0TCT_C0_DELTA_P01
Our system info is similar to what you have and I in fact had Basis team patch BI Cont to level 6 but this did not help. If I were to take a guess i would have to say that these variants are missing in the 7.01 BI version, you can either choose to create a OSS message with SAP and wait for them to fix it or you could fix it manually.

Error while starting admin cockpit

Hi,
I get the error:
Technical Information for Message:
Error loading template 0TPL_0TCT_PORTAL_EVENTLISTENER
Notification Number BRAIN 276
while trying to start some iViews under BI.
Any Ideas?
Thank you
Timm

Hello Timm,
    1. Goto RSOR transaction
    2. Choose BI Content tab ( It may be already selected )
    3. Choose Object Types Under it
    4. On the right side Open the node "Web Template 3.x format ) - technical name TMPL
    5. Select Objects and give the technical name of the template
    6. Collect it and install like any other content object
( I hope you have installed other Admin Cockpit Objects already )
Thanks,
Sheik Bilal

Datasources Missing when Installing Technical Content for BI Admin Cockpit

Hi,
I have installed the Technical Content for BI Admin Cockpit in our QA systems, for BI7, using SPRO, and it seems that there are some missing datasources, transfer rules, etc.,
The one's that are missing are:
=> 0TCTPRCSVAR_TEXT
=> 0TCTPRCSVAR_ATTR
=> 0TCTBWOBJCT_TEXT
=> 0TCTBWOBJCT_ATTR
Does anyone know if this is a known issue, that these are not available?
Please let me know if they're required, and if there's a fix to get them back.
Thanks,
John

Hi John,
In my system the symptom is the same. So I just installed them myself in RSA1->BI Content.
I don't think it's a big problem because the queries on the MultiProviders can run without these master data. For example, you may find the text of query is missing but you can see query's technical name.
I remember when I activate 0TCTBWOBJCT_TEXT and 0TCTPRCSVAR_TEXT, these datasources are in BI 7 version but there's no transformation. So I create myself.
Please let us know if you have other questions.
Regards,
Frank

To install BI Stats cube in 7.0 - BI Admin Cockpit necessary?

Hi Guys,
Just curious to know, to install BI Stats cube (0TCT*) in BI 7.0, is installation of BI Administration Cockpit necessary? We would like to install BI Stats cube from Business content and start collecting Stats.
Did anybody face problems activating BI stats cube in BI 7.0?
Abhijit
Edited by: ABHIJIT TEMBHEKAR on Nov 12, 2008 1:44 PM

Its the reverse, To have BI Admin Cockpit, BI Stats cubes (0TCT*) are necessary!!
VJ

Error BRAIN 276 when you execute a Web template in BI Admin Cockpit in EP

Hi Experts,
I have Installed BI Administration Business Packages in Portal and configured necessary steps in BI System.I have assigned the role in Portal and BI System.
I tried executing one iview...and was getting the following error:
Error loading template 0TPLI_0TCT_MCA1_Q0143
and when i click on the above error ..i was getting another window which shows below message:
Technical Information for Message:
Error loading template 0TPLI_0TCT_MCA1_Q0143
Notification Number BRAIN 276
I was suggested by SAP Note 1014795 to do the below changes :
TEMPLATE_ID=0TPLI_0TCT_MCA1_Q0143 To TEMPLATE=0TPLI_0TCT_MCA1_Q0143
Please note that the above note says to replace TEMPLATE_ID by TEMPLATE in the property of "BEX Web application Query String" of the IView in Portal
and also please note that i have Version=SAP BW 2.X/3.X in Iview Property .
After having made the above changes iam getting the BEX Web Analyzer...where i have the options to open a query ( from all the infoareas of BI System).and then i will select the query (0TCT_MCA1_Q0143) and am executing the same to display the data.
i know that this Is not the correct way of executing the iview for BI Admin Cockpit.
Can anyone help me how to execute the Web Template automatically when the user clicks on IView ?
we have all the above Web Templates Corresponding to BI admin cockpit in active mode in when checked from WAD 3.X , but when when i search for the above web templates in WAD 7.0 i do not find them
Is there anything that i need to activate in BI System ? Or in Portal System?
Or do i have to execute the above web templates in BI WAD before linking them to portal iviews?
Do we have to Migrate the Web Templates from BW 3.5 to BI 7.O?
Thanks
P.Navakanth
-When i try to execute the web templates

We are having this exact same issue - example of one of the errors:: Error loading template 0TPLI_0TCT_MCA1_Q0114. We get this error for all MCA1 templates. Basis says they've deployed latest BP BI Administration 1.0 with Patch 2 (BPBIADMINOSP_2-1000342B.SCA).The info refers to BI Admin Cockpit, Business Package for BI Administration,
BP BI ADMINISTRATION 1.0 ,BI Usage Statistics,0TCT_CA1.
I see from documentationthat the multicube 0TCT_MCA1 is from 0TCT_CA1 and 0TCT_VCA1
From the documentation in http://help.sap.com/saphelp_nw70/helpdata/en/26/9ef41d14dc424183b4807538be8e1e/frameset.htm, under web templates,
1) How come there are more than 1 template with same name and Query with same names- for example:
Web Template: Long-Term Trends in Total Runtimes of BI Applications
WebTemplate: 0TPLI_0TCT_MC01_Q0114
This Web template is the container for the query 0TCT_MC01_Q0114 and is designed to provide detailed analyses.
AND
Web Template: Long-Term Trends in Total Runtimes of BI Applications
WebTemplate: 0TPLI_0TCT_MCA1_Q0114
This Web template is the container for the query 0TCT_MCA1_Q0114 and is used for detailed analyses
2) How come the delivered process chains load other technical content, but does not load 0TCT_CA1
Basis re-deployed the bi admin cockpit contents, but still have error in loading template 0TPLI_0TCT_MCA1_Q0114.
3) Do we need to do any of the following?
SE38 u2013 run RSTCC_ACTIVATEADMINCOCKPIT_NEW
RSA1 - bi content, install & transport
Check role SAP_BI_BW_ADMINSTRATOR
Se38 u2013 rs_template_maintain for active templates u2013 look for MCA1 templated
Tr code RSDDSTAT
Activate Virtual providers
Anything else?
Thanks!

BI Admin Cockpit - include queries in the portal

Hello Everyone,
We have recently installed the BI admin cockpit and try now to set up the portal dashboard.
In the portal under BI Administration > Business Intelligence on the left you have "Data Load Status", "Data Load Statistics" etc.
When we select for example 'Process chain statistics' under "data Load Statistics" there are two windows/ iviews coming up on the right. Now we have to select a web template/query/workbook to see the content and graphic.
But when we log on to the portal again all made settings are gone and we have to include web template/query/workbook again to see the content and graphic.
Does anyone know how to set up the dashboard in a way that all selected web template/query/workbook will be there the next time when logging in to portal?
Thank you very much for your help.

Hello,
Sometimes these kinds of problems can happen if there is some problems with the customizing,
can you check that everything is configured correctly using the support desk tool, please see the information in the SAP note 937697.
Kind Regards,
Des

How to schedule Process chains in Bi Admin Cockpit

Hello friens,
I am working on installing Bi cockpit.
After installing the info providers, i have to schedule the process chains for Bi admin Cockpit.
I know the transaction is RSPC.
But I dont know how to schedule process chains for Bi admin cockpit.
How to schedule Init and Delta
If you can send me step by step documents.
Or any good sap note number.
Or any good links i will really apreciate it.
I want to schedule process chains
Content Master Data
Data Load Statistics # Delta
Data Load Statistics # Init
Query Runtime Statistics # Delta
Query Runtime Statistics # Init
System Master Data
Please advise

Hi,
Please check out this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
Hope it helps.
Thanks
Mona

IViews not loading correctly - BI Admin Cockpit

Hi All,
I recently installed the BI Admin cockpit on the portal and having some problem with the iViews. When I access the cockpit from the BI Administration link, the reports don't seem to load but instead just the empty standard web template is displayed in place of all reports.
1. I checked the iViews preview and they are working fine. No problems with any of the queries/web templates. They are all working correctly.
2. When I select option to Open report in new window, it still loads a empty web template. BUT, when I refresh that link in Internet explorer the report loads correctly! (refresh option from the frame menu did not help)
I didn't understand this behavior and looking for some help/guidance. Any inputs are appreciated.
Thanks & Regards,
Sree

Hi.
The solution for your issue according to BI Admin Cockpit page refresh and Iview not displayed in web Portal is SAP note 972514.
Best regards,
Aliaksandr

Install BI Admin Cockpit

Similar Messages

Maybe you are looking for