Install BI Content Process Chain 0TCT_MD_C_FULL_P01
Hello,
I am installing BI content Process chain (0TCT_MD_C_FULL_P01) for BI statistics.
I did the install but when I try to activate it says " Process has no predecessor" . Has anyone installed this chain and how did you do it. Can you please expalin me steps that u went through.
Best regard
Arjun
Try this.
http://help.sap.com/saphelp_nw70/helpdata/EN/3c/52304260c44446b401a0fd5b90f4a2/frameset.htm
Similar Messages
-
How to see the installed BI content process chain?
Hi Expert,
I've installed a BI content process chain, called 0TCT_MD_C_FULL_P01, but I can not see it in tcode RSPC, also can not use it. Can you tell how to make it available in RSPC?
Thanks a lot.
Happy.BearHi,Check in RSPC under "Not Assigned"
And also chcek in Tables related to PCs,
RSEVENTCHAIN Event Chain Processing Event Table
RSEVENTHEAD Header for the event chain
RSEVENTHEADT Header for the event chain
RSPCCHAIN Process chain details
RSPCCHAINATTR Attributes for a Process Chain
RSPCCHAINEVENTS Multiple Events with Process Chains
RSPCCHAINT Texts for Chain
RSPCCOMMANDLOG System Command Execution Logs (Process Chains)
RSPCLOGCHAIN Cross-Table Log ID / Chain ID
RSPCLOGS Application Logs for the Process Chains
RSPCPROCESSLOG Logs for the Chain Runs
RSPCRUNVARIABLES Variables for Process Chains for Runtime
RSPC_MONITOR Monitor individual process chains
Thanks
Reddy -
Tech. Content Process Chain (0TCT...)
Hi,
I installed the technical content for BW7.0 and they are visible in BW but when I installed the technical business content process chains, they are not visible in RSPC. I did search for them but could not find any where. What can be the reason?
Please advice.
Regards,
AnilFurther to above post, While activating the technical content, system could not collect some of the infopackages as they were not in the business content. Is there any relation between process chain non visibility?
-
Technical Content Process Chain Schedules
Hello,
We are on BW 7, and I was curious how often companies are running their technical content process chains?
Is weekly typical, or should they be running more often?
Thanks,
NickThanks Dennis!
Is there an order in which the TCT chains should be executed in nightly?
Our queries are executed during the day business hours 7 am - 6 pm
Our Data loads are primarily overnight.
The chains we have for TCT are:
0TCT_MD_C_FULL_P01 - Content Master Data
0TCT_C2_DELTA_P01 - Data Load Statistics - Delta
0TCT_C0_DELTA_P01 - Query Runtime Statistics - Delta
0TCT_MD_S_FULL_P01 - System Master Data
Thanks,
Nick -
Scheduling Technical Content Process Chains
Hello experts,
I'm trying to schedule the Technical Content Process Chain as per SAP Note 934848 - step 4.
This step says:
4. Schedule Process Chains.
Please schedule the technical content process chains (0TCT*) in transaction RSPC. "INIT" process chains need to be scheduled once and "DELTA" process chains should be scheduled periodically.
But when I open RSPC I can't find anything with (0TCT*).
Can anyone help me?
Best Regards,
Rui RombaHi Vikram,
We have everything installed.
Recently we had an auditory from SAP AG and they detected that we needded only to schedule the Technical Content Process Chain.
Regards,
Rui -
Admin cockpit - Business Content Process chain Activation failure
Hi,
we are working in Admin cockpit in sand box server.
we are activating the Business Content Process chain by taking all variants (begin with 0TCT) but we are getting the error message that Process AND has no predecessor.
Could you kindly suggest any thing to move further.
Thanks & Regards,
Shaliny. M
Edited by: shaliny mega on Mar 19, 2008 7:04 AMHi shaliny,
As mentioned in this post
https://www.sdn.sap.com/irj/sdn/forums.
Have u collected the Source system for which ur collecting the PC when u r activating Business conent?
Collect the source system when u r activating the PC. Give a try.
if it is useful assign points.
Regards,
Senthil -
Hi Experts,
I installed NW 7.0 sr3 ABAP system, and then installed BI_CONT release 703 as add-on.
But our BI consultant not able to find all the objects when he is trying to activate process chain from the bi content.
Can anyone please tell me which version i have to install to get all the necessary objects.
Thanks in advance
Uday
Edited by: basisuday on Aug 20, 2010 9:47 AMHello experts
I am not able to find support package name.
When i click on package level button from SAPM tcode
BI_CONT 703 0000 - Business Intelligence Content.
Is my BI_CONT add-on installed successfully?
And also i am not able to see BI_CONT in imported packages list. -
Business Content & Process Chains
Hi All,
I would like to know if process chains are required to update standard reports data or the data can be refreshed from the report to see the updated records.
Thanks in advance.
Kind Regards
NirenHi,
If your job is to just use the reports and not to worry abt where data comes etc, then yes, its enough if you refresh the report and the report will get the latest updated data from the base Infoprovider which is the physical storage of data.
Process Chains are something that will pul data from the source system and load it into the base Infoprovider, fro where the report picks up the data. so if the infoprovider has the latest data, report will obviously pick up the latst data.
If the infoprovider needs to be updated with latest data from the source system, then you run the process chain.
Thanks -
Error in installing process chain from Business Content.
Dear Experts,
I have successfully installed the Technical Content from Business Content and now trying to install Content Master Data process chain for info package for the same but its showing error.
<b>Technical Name for Process Chain : 0TCT_MD_C_FULL_P01</b>
Error after instaling from BI Content : <b>Process AND has no predecessor.</b>
Finally, while checking in RSPC it comes the name of Process Chain but its not showing anything.
Also, one more thing is I am trying to install in development system and if that occurs successfully than transport to production as production directly don't wanted to do.
Thanks in advance.
Regards,
NJithink u have not activated the process chainafter creating the process chain u might have saved it with out activating the process cahin so that is the reason why it is showing name name but northing in the chain first activate the cahin then it iwill show
try this
Aravindan pagadala
satyam -
Error while activating process chains from Business Content
Hi All,
I am trying to activate the SAP Business Content Process Chains, which load data to 0PM_DSO2 in Plant Maintenance Area -
1.Delta Upload : MTTR / MTBR (0PM_DELTA_P02)
2.Initialisation : MTTR / MTBR (0PM_INIT_P01 )
And they are failing with the error
"Object 0PAK_BZJNGI4SYTTJM5DXY8IPMHB0C could not be found in version
Message no. RS_EXCEPTION280"
"Message Text
Object 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0 could not be found in version
Technical Data
Message type__________ E (Error)
Message class_________ RS_EXCEPTION (Exception Messages)
Message number________ 280
Message variable 1____
Message variable 2____ 0PAK_EYQGZ09K9SFFUMOFRQ0730LJ0
Message variable 3____
Message variable 4____ "
In the collected objects, these two infopacks are not present also.
Can you please let me know how to proceed?
Many Thanks in Advance,
VineethHi
Make sure these 2LIS_17_I0NOTIF and 2LIS_18_I0NOTIF datasources are being installed.
Check these links.
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/e7/082888ca2f994794986448568aec2d/frameset.htm
Chandu.
Edited by: Chandu on Jan 22, 2009 2:24 PM -
OBJECTS_OBJREF_NOT_ASSIGNED Dump while Installing Process Chain
Hi Gurus,
I got OBJECTS_OBJREF_NOT_ASSIGNED dump while installing Business Content process chian "0TCT_C2_INIT_P01".
Also 6 info packages were not delivered in business content for the above chian.
Any Help.
Regards,
AnilCheck if this note helps..though it is for infoobjects
<a href="https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1019055&_NLANG=E">Note 1019055 - Runtimer errors when activating InfoObjects</a>
Message was edited by:
Manga Paidikondala -
Process Chains for BW Statistics (Technical Content)
Hi Guys,
Just a quick question - anyone know of any Business Content Process Chains for BW Statistics?
I can't seem to find any - but just looking for confirmation that none exist and I will then have to built my own.
Thanks
ScottHi,
Yes, you have to build your own. Thats the same scenario we faced too.
With Regards -
BI admin cockpit for process chains
Hi
Currently we are monitoring process chains(Daily data loads) on a daily basis ,Business users want the statstics of the process chains to be implemented in cockpits via BI admin cockpit( BI 7 version) .can some one tell how to implement BI admin cockpit for process chains.
If some one has some specific documents can you please mail then to my email: [email protected]
Thanks
BhavanaHi,
You need to install Business Content
Front End and OLAP Statistics (Aggregated) ( 0TCT_C01, 0TCT_VC01)
0TCT_C01
InfoCube 0TCT_C01 is a standard InfoCube that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
0TCT_VC01
InfoCube 0TCT_VC01 is a Virtual Provider that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
Front End and OLAP Statistics (Details) (0TCT_C02, 0TCT_VC02)
0TCT_C02
InfoCube 0TCT_C02 is a standard InfoCube that contains detail values for front end and query runtime statistics.
This InfoCube is used for monitors that display detail values for the query runtime object.
0TCT_VC02
InfoCube 0TCT_VC02 is a Virtual Provider that contains front end and query runtime statistics (details).
Data Manager Statistics (Details) (0TCT_C03, 0TCT_VC03)
0TCT_C03
InfoCube 0TCT_C03 is a standard InfoCube that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
0TCT_VC03
InfoCube 0TCT_VC03 is a Virtual Provider that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
DTP Statistics (0TCT_C22, 0TCT_VC22)
0TCT_C22
The InfoCube 0TCT_C22 is a Standard InfoCube that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
0TCT_VC22
The InfoCube 0TCT_VC22 is a Virtual Provider that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
InfoPackage Statistics (0TCT_C23, 0TCT_VC23)
0TCT_VC23
The InfoCube 0TCT_VC23 is a Virtual Provider that contains InfoPackage statistics or detailed information about the InfoPackage that are executed individually or in process chains.
0TCT_C23
The InfoCube 0TCT_C23 is a Standard InfoCube that contains InfoPackage statistics or detailed information about InfoPackages that are executed individually or within a process chain.
Process Statistics (0TCT_VC21, 0TCT_C21)
0TCT_VC21
The InfoCube 0TCT_VC21 is a Virtual Provider that contains process chain statistics or detailed information about process chains and process types that are successfully executed.
This InfoCube is used for all the monitors that display detailed information about process chain statistics and process statistics on the portal.
0TCT_C21
The InfoCube 0TCT_C21 is a Standard InfoCube that contains process statistics or details of processes that are executed individually or in process chains.
This InfoCube is used for monitors that display all the process runtimes on the portal.
Process Status (0TCT_VC12)
The InfoCube 0TCT_VC12 is a Virtual Provider that specifies the status of the process chain and detailed information about the process status.
BI Object Request Status (0TCT_VC11)
The InfoCube 0TCT_VC11 is a Virtual Provider that provides detailed information about requests in all the Data Targets and Master Data in characteristics.
Content Master Data
The process chain 0TCT_MD_C_FULL_P01 is used to load the content master data.
(e.g: Process Chain, Process Status, Web template, Process variant, Web item)
System Master Data
The process chain 0TCT_MD_S_FULL_P01 is used to load system master data.
e.g:BW Object type
Data Load Statistics Delta
The process chain 0TCT_C2_DELTA_P01 is used to load delta data for data load statistics.
The following processes are included in the process chain:
Process Target
0TCT_DS22_DELTA_DATAMART (B71) DTP Statistics [0TCT_C22]
0TCT_DS23_DELTA_DATAMART (B71) Info Package Statistics [0TCT_C23]
0TCT_DS21_DELTA_DATAMART (B71) Process Statistics [0TCT_C21]
Query Runtime Statistics Delta
The process chain 0TCT_C0_DELTA_P01 is used to load delta data for query runtime statistics.
The following processes are included in the process chain:
Process Target
0TCT_DS01_DELTA_DATAMART Front end and OLAP statistics (aggregated) [ 0TCT_C01]
0TCT_DS02_DELTA_DATAMART Front end and OLAP statistics (details) [0TCT_C02]
0TCT_DS03_DELTA_DATAMART Data manager statistics (details) [0TCT_C03] -
BI Admin Cockpit: Program variant missing in Process chain
Hi,
I'm installing BI Admin Cockpit and have troubles with Process chains. I followed the installatin guide and had problems activating process chains: 0TCT_C2_INIT_P01 and 0TCT_MD_C_FULL_P01 because of missing InfoPackages. I solved this by installing an correction as it is described by Note: 1432353. After this I activate these Process chains manually in RSA1 Administration--> BI Content -->Process Chains (all necessary objects). No Problems occured. The Problem is when I'm start these Process chains, I get an error on the last step. There is an Abap Programm with an variant. This variant is missing in the System.
The Variants are:
- RSTCC_Dataload (0TCT_C2_INIT_P01)
- RSTCC_QRuntime (0TCT_MD_C_FULL_P01)
I tried also to get these Process chains with Dataflow before and after to view if I forgot anything to activate, but there is no programm variant. Can anybody explain, how to get these programm variants?
Thanks and greetings,
SebastianSebastian,
I faced the same problem. Basically what I found was that variants were not defined. So I manually created the value for variants:
1. For RSTCC_DATALOAD assign value TCT_C2_DELTA_P01
2. For RSTCC_QRUNTIME assign value 0TCT_C0_DELTA_P01
Our system info is similar to what you have and I in fact had Basis team patch BI Cont to level 6 but this did not help. If I were to take a guess i would have to say that these variants are missing in the 7.01 BI version, you can either choose to create a OSS message with SAP and wait for them to fix it or you could fix it manually. -
Missing Infopackage in 0TCT_MD_C_FULL_P01 Process chain
Hi Gurus,
We are on SPS 11 and BISP- 12. We installed the technical content but above process chain contain missing infopackages. OSS not 981555 is not helping in this case ( Solution given by SAP). Can some one provide me the required details to create those missing infopackages manually.
Any one using 0TCT_MD_C_FULL_P01 process chain please help me or mail me the details @ [email protected]
Regards,
AnilHi Anil,
Make sure that the data sources are replicated. Incase you want to activate process chain manually go to TX: RSORBCT and select only those system where you want to install the process chain ( Source system Assignment SHIFT+F7).
Incase you want to activate whole content go through the note 934848.
Thanks and Regards,
Srilatha
Maybe you are looking for
-
I am trying to send my resume, cv, up to recruitment agencies, I am using my iPad, and I have no options to upload when requested from my iPad... Can anyone offer any help... Why is the iPad so restrictive when used as a mobile office solution.
-
Calling a method from another class or accessing a component from another
Hi all im trying to make a find/replace dialog box my main application form has a jtextpane and when i open up the find and replace dialog box it has two textboxes (find and replace) now i have the code to do the finding on my jtextpane but how do i
-
How do I change default setting?
When anyone selects 'Save As', and we're not saving a new file, but writing over an old file (update, for example), we will always see two choices CANCEL or REPLACE OLD FILE. In snowleopard, the CANCEL is the default. Can someone tell me how to chang
-
How to configure Cairngorm examples in Eclipse 3.2
Pls help me to configure and build CairngormStoreWeb2_1 examples in eclipse 3.2. I have installed Flex 3 plugin to eclipse. Any help is appreciated
-
SQLLoader - using more than 1 function in a single field
Hi. I have problem with sqlloader. i'm trying to call 2 function (DECODE and NPCS_FINBOUND_CTRL) for field type like below LOAD DATA INFILE "TEST.txt" APPEND INTO TABLE NPCS_INBOUND_NIZ TYPE POSITION(1:1) "DECODE(:TYPE,1,2,:TYPE)" "NPCS_FINBOUND_CTRL