Install BI Tools with paid VS2008 Pro in workstation and paid Sql Server 2008 R2 in server?

My workstation has VS2008 Pro (paid) and Sql Express (free); our Windows Enterprise server has SQL Server 2008 R2 RTM (paid).
In other words, my workstation may not have a paid version of the sql server DB, but our server does. Is there a possibility that I can install the BI development tools in my workstation?
Thanks.
VM

Hi VM,
As you can see on the link below
http://msdn.microsoft.com/en-us/library/cc645993(v=sql.105).aspx#Dev_tools
The Business Intelligence Development Studio is not available on SQL Server 2008 Express Edition. So if you want to the BIDS tool is available on your workstation, then you need to change the edition from Express to other edition.
Besides, you can install SQL Server Data Tools - Business Intelligence for Visual Studio 2012 on your workstation, in this case, the BI development tools is available on your workstation. The SQL Server Data Tools - Business Intelligence for Visual Studio
2012 is available on the link below.
http://www.microsoft.com/en-in/download/details.aspx?id=36843
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, Photoshop CC won't read the card drivers and says I need to reinstall them and disabled 3D funtions as a result. Anyone else with this issue?

Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, I upgraded to Adobe CC and Photoshop CC disabled some filters and 3D functionality. The preference panel for Performance/Graphics Card in Photoshop CC is greyed out and inaccessible and shows this message -
"Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
I still have Photoshop CS6 installed and it still works perfectly. Anyone else with this issue? Is there a driver update for this compatable with my setup?
OS 10.7.5
Mac Pro 1,1
20gb ram
ATI Radeon HD 5770 Graphics Card
30" Apple Cinema HD display

after going round with this Adobe was able to find the fix....opened the "show content" folder for the application Photoshop CC (control click on the application folder) and navigate to the sniffer file and rename it by putting a tilda ~ in front of the name..." ~sniffer ", close and open PhotoshopCC...and voila, problem solved... Thankyou Adobe support

I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

Go to: Apple > Force Quit
and select Mail > Force Ouit.

Have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture. The Apple icon, usually at top left corner, appears in to

have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.

That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.

Windows Search Service failing to install on Windows Server 2008 R2 Terminal Server

Hi,
I am unable to install the Windows Search Service on a Server 2008 R2 Terminal Server. I want to install this to enable indexing options within Outlook 2013 for all users.
Server Manager > Add Roles > File Services > Select only Windows Search Service > Install.
The error I receive: "Attempt to configure Windows Search Service failed with error code 0x80070057. The parameter is incorrect."
Thanks,
Bjorn

Hi,
I did the test and could install the Windows Search Service without problem.
Which role did you installed on the terminal server?
Did you try to install it on another windows server?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out

What's wrong with the IOS5 download, it downloads and then after its finished it says server timed out, how do i sort this out?

The Firefox versions which come with many Linux distros have the default Mozilla Firefox updater disabled and use the distros built-in updater.
See this - http://linuxforums.org.uk/netbooks/install-firefox-6-on-an-acer-aspire-one-running-linpus-lite-linux/

Server 2008 R2 RADIUS Server with a Cisco Aironet 1040 Wireless AP

I am trying to get Server 2008 R2 RADIUS Server to work with a Cisco Aironet 1040 Wireless AP. I have installed the RADIUS server by MS standards and performed some searches on Google to configure the Cisco Aironet. I see others using a Wireless LAN Controller, which I do not have. I found this post below:
https://supportforums.cisco.com/discussion/11546056/wlc-2504-radius-2008-r2-server
But I have yet to locate a good step by step document on how to set it up and I have found so many different ways that others have set it up, but none have yet to work. I am having authentication issues that I have know of and I do not see any errors in the Windows Event Viewer and I do not know where the Acess Point stores it logs for any sort of error. Keep in mind this is the first time I am doing this. I do not have a Wireless LAN Controller and all my network / domain services are on individually built servers and not on one single server as I have seen with most of the documentation they all say the same thing by putting the Certificate Services, Domain Services (AD / ADS, etc), and NPS. I do not want that configuration and my setup should not be any different, but something is not right. I know from reading that this is not rocket science, but from someone who has never done it before this is difficult as I keep reading on and so many people do it different ways including what I have been reading according to what Cisco says to configure in the environment. Does anyone know where I can find good step by step documentation along with where I can look for logs on either device? I find that all the documentation I see on Cisco's website and from searching that it is old and outdated and not been updated in a long time so it is hard to determine what works and what does not work. I am stumped here and have been doing this for several weeks now with no luck. Thank you in advance.

I did configure the Server 2008 R2 RADIUS Server using this video below:
https://www.youtube.com/watch?v=g-0MM_tK-Tk
I also referenced Technet to make sure it was configured correctly as well. I am still not sure if I am 100% setup correctly on the Windows Server side, but I for sure want to make sure I have the AP side setup correctly. Do you know of a better article for the Windows Server 2008 R2 setup? Does it matter that I do not have all the services installed on the same server? Instead I have them installed on multiple servers.
I have image number c1140-k9w7-tar.124.25d.JA1 on the AP. The part that confused me in that article, which I have seen before was the part about "Setting up access point must be configured in the authentication server as an AAA client." What is the AAA Client? I also am not aware of having Cisco Secure ACS anywhere built into the AP as that part through me off completely. Do I need to skip these steps? Thank you for help on this.

GB vs. Pro Tools With Mbox or Apogee Duet 2 and Neumann TLM 102

Any guidance on this is greatly appreciated....I am VO artists really being forced into home recording. Can not do a USB Mic into the MBP as the sound is not professional enough. But I do use GB. Based on that, and the fact I only record my voice, I have a series of questions
First question: I'm thinking of getting Apogee Duet 2 as opposed to an Mbox. Any opinion? The Mbox comes with Pro Tools
Second question: Is Pro Tools better software than GB? Remember this is for voice-over work.
Third question: Has anyone out there used either the Apogee Duet 2 or Mbox with a Neumann TLM 102 mic? Do you hear a difference between Apogee Duet 2 and Mbox with the Neumann?
Forth question: If you were in my shoes, and just wanted a super duper VO sound, should I be looking at something other than mBox and Apogee?
Again, to be clear: I'm not recording instruments, so I don't need a lot of bells and whistles...just great, and I mean great sound quality...
Thanks so much
Oh....real important...running OS 10.7.4 if that affects the above... I alos know 10.7.4 is getting upgraded ( spoke to Apple) because of the QT Pro 7 problems, amongst others

Go with the Duet 2, no question. You'll hear the difference...
Pro Tools and GarageBand are both great apps, its really a question of what your'e trying to do with it. Unless there's anything you're trying to do but can't do in GarageBand, there's no real advantage to Pro Tools for what you're doing.
Apogee has always been a "no bells and whistles" company - it simply works and sounds great.
Hope this helps!

Install error DF037 with Acrobat X Pro?

Hi there, just installed CS6 download and had error DF037 with Acrobat X Pro. Anyone know how to fix? Thanks Rosa

Hi rosamac01,
DF037 error is a permission related error. You can find details on how to resolve this error at Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
You can locate the remainder of the errors and solutions under Installation, launch log errors | CS5, CS5.5, CS6, CCM - http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html.

Lenovo Yoga with Windows 8 Pro, Office 2013 and Visual Studio

For you developer types, I just wanted to post a message and let you know my experience with Lenovo Ideapad Yoga 13 as a development machine. I bought Lenovo Ideapad Yoga 13 from Bestbuy for $999.99. As expected, it came with a crap ton of bloatware installed by Lenovo.
Here is a summary of what I did to it (I take no responsilibity for accuracy of below information. You are on your own if you decide to follow them. I am just putting this down from my memory so that I can look it up in the future if I ever need to do this again).
INITIAL CLEANUP
Installed Lenovo hotfix for partition cleanup/merging: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS033035
Installed Lenovo Touchpad driver fix.
CAUTION: I take no responsibility for below steps. I am writing them from memory and if you decide to follow them and end up making your machine unusable, you are on your own as Lenovo might not honor your warranty.
BACK UP ENTIRE DISK (requires an empty USB flash drive for booting and another external USB drive for backup)
Copied Drivers from D_Backup folder to the external USB hard drive (plugged into USB 3.0 port).
Installed Paragon Backup & Recovery 2012 Free: http://www.paragon-software.com/home/br-free/
Created Paragon Backup & Recovery boot USB flash drive with default Linux recovery environment option (flash drive plugged into USB 2.0 port).
Shutdown Lenovo Yoga.
Plugged in the Paragon Backup & Recovery boot USB flash drive (USB 2.0 port).
Pressed the one key recovery button (next to power button). Went to BIOS.
In the BIOS, enabled Legacay mode and made Legacy high priority and saved the changes.
The machine booted into Paragon Backup & Recovery mode. From there, made a backup of entire disk to the external USB hard drive.
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS. Turned off Legacy mode and switched back to UEFI boot mode and saved the changes and restarted the machine.
Logged into the machine and verified that everything was good and checked the external USB drive to verify that the backup image was present.
MAKE WINDOWS 8 PRO BOOT USB FLASH DRIVE (requires a second empty USB flash drive and a second computer with Windows 7. This USB Flash Drive has to be between 4GB to 32GB as Windows won't format 64GB flash drives to FAT32 mode)
(Note: I installed Windows 8 Pro in UEFI mode. See http://pcsupport.about.com/od/windows-8/a/install-windows-8-usb.htm)
You need a licensed ISO image of Windows 8 Professional Full version (not the upgrade version) from your MSDN or Technet subscription or create an ISO from the Windows 8 Pro full version DVD.
Download Windows 7 USB/DVD Download Tool on the computer with windows 7.
Plug in the second empty USB flash drive (has to be at least 4GB but less than 32GB) into the computer with Windows 7.
Using Windows 7 USB/DVD Download Tool and the ISO file, create the Windows 8 Pro bootable USB Flash drive.
Create a new folder on your computer disk, for example, C:\WIN8USB.
Copy all the files from your USB flash drive to the newly created folder (created in the previous step).
Right click on the USB drive icon in Computer window and select “Format…” from the context menu. Make sure you select “FAT32 (Default)” in “File system” drop down menu. Click “Start” and wait till the drive gets formatted. This step is needed because NTFS is not readable by BIOS in UEFI boot mode. During formatting, MBR is preserved so the thumbdrive is still bootable.
Copy all the files from the folder you created earlier (C:\WIN8USB, for example) to the formatted drive. Your Windows 8 installation USB drive is ready to install in UEFI mode.
WIPE THE DISK PARTITIONS
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS, enabled Legacay mode and made Legacy high priority and saved the changes.
Booted into Paragon Backup & Recovery boot USB flash drive again. This time, I deleted all partitions on the primary disk (Disk 0). CAUTION: This WILL wipe your hard disk and will make your machine unusable!!!
Shut down the machine, pressed the one key recovery button (next to power button). Went to BIOS. Turned off Legacy mode and switched back to UEFI boot mode and saved the changes and shut down the machine.
At this point, the disk is wiped clean. All factory installed software and recovery partitions are gone!!!
INSTALL WINDOWS 8 PRO
Plug in the USB Flash Drive with Windows 8 Pro install files.
Windows 8 Installer would show the unallocated disk space. I can't remember the exact details but either I had to click on Delete or New to delete and then create a new GPT partition. The entire partition was about 119GB.
From that point, follow the Windows 8 Pro installation steps.
After booting up into Windows 8 Pro, plug the external USB drive that had the drivers folder backed up from D_backups.
Install all the drivers from this folder (I was able to install everything except for one Intel fast boot one because of missing partition but my Yoga still boots up just as fast).
Go to device manager to check and everything should be good now.
Run Windows Update.
You should now have about 101GB free on C: drive!!
INSTALL VISUAL STUDIO, SQL SERVER and OFFICE 2013 ON LENOVO YOGA 13
I installed the following in that order:
Microsoft SQL Server 2008 R2 Developer edition (I installed all components, everything!). Then I installed latest service pack.
Microsoft Visual Studio 2010 (I installed all components, everything!). Then I installed latest service pack.
Microsoft SQL Server 2012 Developer edition(I installed all components, everything!). Then I installed latest service pack.
Microsoft Visual Studio 2012(I installed all components, everything!)
I ran Windows update and also installed Nov 2012 updates of SQL Server Data tools.
I then installed Office 2013 Pro Plus.
MAKE LENOVO YOGA 13 MORE SECURE
Go to Control Panel and enable Windows Defender (it is included by default in Windows 8 and is anti-virus and anti-malware solution)
Enable full hard-disk encryption using BitLocker feature of Windows 8 Pro. Since Lenovo Ideapad Yoga 13 doesn't have hardware TPM, you have to enable password based option. For this, follow the steps here: http://rics.partners.org/show_article.php?id=274.
Basically, you go to GPEDIT.MSC and Open Computer Configuration => Administrative Templates => Windows Components => BitLocker Drive Encryption => Operating System Drives. From the right pane double-click "Require additional authentication at startup. Select Enabled radio button and check the box for "Allow BitLocker without a compatible TPM...". Click OK and close the policy editor. Then Right-click your C drive in the Computer folder, click Turn on BitLocker. Then select Enter a password instead of USB option. Then provide a strong password (make sure to write it down and put it in a SAFE place, if you lose the password, no one can boot into your hard disk). Then select Save to a file and save it to the External Drive. Select "Encrypt entire drive...", click Next. When this is done, you will get a pop-up on the lower-right a prompt to restart the computer. Restart your PC. Enter the encryption password created earlier. If you are successful in getting into Windows, you're all set.
I also hooked up to Skydrive and used BoxCryptor to encrypt my files in cloud.
The available free disk space should now be about 54GB.
I verified that Lenovo Yoga 13 works like a champ with no slowdown with Visual Studio 2010, Visual Studio 2012 and SQL Server Management Studio open simultaneously and Bitlocker enabled!
The keyboard right SHIFT key is small but other than that, it can work as a great portable development machine and Microsoft Reader is great for reading PDF eBooks.
So if you are a Developer on Microsoft platform, go right ahead. Lenovo IdeaPad Yoga 13 is great for running Visual Studio 2010 and Visual Studio 2012 (1600x900 resolution is totally usable) while on the move. Since I have only had this machine for a few days, I can't tell much about the long term reliability.
Solved!
Go to Solution.

Thank you for posting this. I am in this exact situation. I purchased a yoga 13, and installed Visual Studio Express 2012 for Windows Phone. As it turns out, the Windows Phone Emulator ONLY works in a Windows 8 Pro environment. Since the Yoga doesn't have a disc drive, I shared my W7 computer's cd drive, then put in Windows 8 Pro, so that it could install onto the Yoga. Well, after the installation was done, I tried running my program again and ran into the same issue. It prompted me that my environment must be Windows 8 Pro! I thought that Windows 8 Pro already installed but, what confuses me is that I see no indication that Windows 8 Pro installed. When I go to the System Window, it reads: "Windows 8". Should it read Windows 8 Pro?
Ultimately, I'd like to know, are you able to execute the Windows Phone Emulator? I'm not sure as to whether the Yoga has the hardware capability (needs to be SLAT enabled or something like that?), I HOPE it is able to, and judging by your post, it seems like it but I'd love to know your perspective on my approach.
Please let me know if this makes sense, as I'm new to this kind of thing but really want to start development for Windows Phone.

My Mac with Adobe XI Pro is dead and I cannot access the machine.

I had a Mac with Adobe XI pro installed but the Mac has now died and I have no access to the machine any longer. However, I have now bought and windows machine instead and installed Adobe XI pro on it by the product key does not work. Do I really have to buy the whole thing again, surely not? Thanks,

Certainly you cannot take a Windows license to Mac or a Mac license to Windows. However, Adobe have something called a "crossgrade". You cannot buy this in normal stores or web pages, you have to talk to customer service.

Two weird issues with my Mac Pro (locking up and failing to reboot)

Hello,
I am having two problems with my Mac Pro. The first one is every time I put it to sleep and then wake it up it locks up. This problem came after I installed Leopard (in Tiger sometimes it would take longer to come out of sleep but it always came out). My other problem showed up after I installed Leopard as well, every time I go up to the apple menu and click on restart my computer dose everything normal but when it goes to the “off” state it sits there and reboots over and over and over again. I don’t ever hear the bong or see the grey start screen; I can just hear my CD-ROM drives being accessed (clicking sound I usually hear when I turn the computer on) over and over again. I have run the Apple Hardware Test and it comes back clean, I have also reset the SMC and zapped the PRAM.
I was wondering if anyone had any experience with these problems and knew how to fix them.

This is exactly what my Mac Pro did before it died last Friday (9 November 2007).
Apple keeps saying Mac Pro death isn't common, but I've talked to a dozen people whose Pro died just like mine did.
Apple gave me a brand new Pro Sunday, which was nice of them, and I probably was just unlucky with the first one.
Still, it is obvious that Apple is having QC issues lately.
USB video devices will crash a Mac Pro consistently, for example. It's really disappointing because the machine is very nice otherwise.

What is the best printer to buy to use with my macbook pro, iPad 2, and touch?

Hi, Im trying to figure out which printer I should buy that is affordable and is compatiable with my macbook pro with os x lion installed on it, my ipad 2, and my itouch 3rd generation.
Thanks,
Preston

Try the HP photosmart B110 its a bloody fantastic wireless printer scanner and copier and its got a nice wee touch screen too.
You can wirelesly print when you are out and about send yourself a wee email to your printer and it will print out.
It also makes use of Airprint on your Ipad and your Iphone, I managed to pick this printer up for £30 as it was on a promo for a month or so dont know if its gone back up in price or not.
Print quality is amazing and it prints good photo prints too.
Ink is really reasonable and cheap for this printer too, and not only does it take seperate black cartrige but all the colour ones are seperate too which its cheap for ink in the long run ;0)
Hope that this offers some help

Server 2008 R2 Terminal Server c0000005 and c0000006 errors with KERNELBASE.dll error in RDP sessions.

We installed a new Server 2008 R2 server this spring. It is configured as a Terminal Server with 16 Wyse t10 thin clients connecting with RDP. We are a small resort so we run Springer Miller Host and SpaSoft. Ever since moving from PCs to the thin clients
and TS we have been seeing SpaSoft randomly crash with KERNELBASE.dll errors and also a lot of c0000005 and c0000006 errors. Springer Miller support says its a Microsoft Networking issue so no help there. The company we worked with to install this has no clue
so I hope to reach out to this community to solve this. I can also open support case with Microsoft Support but I am not sure if they will be of any help. Here are some examples of the errors:
"Event 1000
Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0x0eedfade
Fault offset: 0x0000c42d
Faulting process id: 0x3718
Faulting application start time: 0x01cf9ac7922487e9
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: cfdcf9a9-06ba-11e4-a5af-000c298d9aa5"
Also:
"Faulting application name: VH.EXE, version: 18.80.430.0, time stamp: 0x3f73b447
Faulting module name: VFP8R.DLL, version: 8.0.0.3117, time stamp: 0x3f73c232
Exception code: 0xc0000006
Fault offset: 0x0001d598
Faulting process id: 0x2bc8
Faulting application start time: 0x01cf99297ee1742f
Faulting application path: J:\HOSTPLUS\fxp32\VH.EXE
Faulting module path: J:\HOSTPLUS\fxp32\VFP8R.DLL
Report Id: 5fbc65c4-055c-11e4-a5af-000c298d9aa5"
And:
"Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process id: 0x2aa0
Faulting application start time: 0x01cf988e6770e619
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: unknown
Report Id: 01029179-04b9-11e4-a5af-000c298d9aa5"
There are no network specific errors in any of the logs. I am thinking that SpaSoft needs to be run as an administrator but I am not sure how to do that in this environment. We have disabled DEP for all but essential Windows processes. All of the firewall
and AV has been completely disabled, and still getting these errors. Is there a way to run these applications as admin without the user actually being an admin? Should I go ahead and open a Microsoft support case? Thanks

Hi,
Thank you for posting in Windows Server Forum.
Explanation
The indicated program stopped unexpectedly. The message contains details on which program and module stopped. A matching event with Event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
User Action
If an error report was generated for this error, you might be able to obtain more information about the error by sending the report to Microsoft for analysis.
Yeah, you can open a support case with Microsoft as they will help and guide you for proper solution. You can go through
this source article.
Hope it helps!
Thanks.
Dharmesh Solanki

Version 4 - telling me critiacal update should be installed now... goes nto Downloading firefox window and sits there trying to connect to server forever.. What is going on?

On two of my PCs I received a notice that Firefox has a critical update that should be installed NOW. It takes me into running a program "updater.exe" and pops a firefox window "Software Update" which says it's "Downloading Firefox" and the green bar runs across the window and the text ":Connecting to the update server" appears under the moving bar. That's about all that it does forever. No connect, no update, just the bar going across the window. If it was on ONE of my PCs, I'd think that the PC has a problem. The same results on TWO PCs, one Vista and one XP, makes me think there is some other issue at hand... Please help.

See:
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.<br />
Vista:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then easiest is to download the full version.
* http://www.mozilla.com/en-US/firefox/all.html
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Install BI Tools with paid VS2008 Pro in workstation and paid Sql Server 2008 R2 in server?

Similar Messages

Maybe you are looking for