Install blue status bar went gray, but all is OK...

So I finally got around to biting the bullet and I installed iTunes 8.0.2 on our MBP (still haven't done it on the G4 which has all our music in the Library.)
During installation, I watched the blue status bar (I don't know its real name - that liquidy turquoise thing that moves left to right to tell you how much is done). Early on in the installation it went from blue to a pale gray.
Installation finished successfully and a Software Update shows that no new software is needed. Get Info shows the correct version and I can open iTunes 8.0.2 just fine.
I did have a permission repair report from after the install of
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./System/Library/LaunchDaemons/com.apple.usbmuxd.plist, should be -rw-r--r-- , they are -rwxr-xr-x
Owner and group corrected on ./System/Library/LaunchDaemons/com.apple.usbmuxd.plist
Permissions corrected on ./System/Library/LaunchDaemons/com.apple.usbmuxd.plist
Permissions repair complete
The privileges have been verified or repaired on the selected volume
Should I be worried about the blue to grey bar?
Thanks from the ever cautious
Mrs H

"...Early on in the installation it went from blue to a pale gray..."
Quite possibly you may have clicked off the installer box onto the finder desktop and the box is now deselected. Clicking back onto the box would have gotten the color back. However as hpr3 noted, you're OK.

Similar Messages

HT1695 What does it mean when my wi-fi indicator in the status bar is gray instead of blue?

What does it mean when my wi-fi indicator in the status bar is gray instead of blue..it is blue when using the Fox news and local TV station app..but gray when using the CNN app--all on my home wi-fi. Thanks.

What does it mean when my wi-fi indicator in the status bar is gray instead of blue..it is blue when using the Fox news and local TV station app..but gray when using the CNN app--all on my home wi-fi. Thanks.

I downloads the latest iTunes software update and it properly installed. But, I cannot close the window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the

I downloaded the latest iTunes software update and it properly installed. But, I cannot close the update window showing it was completed and the blue completion bar is full but cannot cancel or close it either. Any ideas on how to clear that out and close the window. Tried to quit on both the big window and the software update title in the menu bar. No luck.

Tried that by shutting down via the power button only as the normal shutdown was nixed by the open window issue. It did not help. Found a very similar question in the discussions and it recommended "Force Quit". That worked and the update works normal and the window is gone. Thanks!

My current iPhoto'11 version is the 9.2.1 one. I just attempted to install the 9.2.3 update, but all I got was an Alert sign stating that "iPhoto 9.1.0 or later is required to install this update." Same thing happened with the 9.1.0 update afterwards.

My current iPhoto'11 version is the 9.2.1 one. I just attempted to install the 9.2.3 update, but all I got was an Alert sign stating that "iPhto 9.1.0 or later is required to install this update." I then tried to download the 9.1.0 update, with the same fruitless results. What can be wrong here?

Put iPhoto back into the Applications folder, not in any subfolders, and ensure it's named iPhoto or iPhoto.app.
(65384)

"Waiting for iPhone... " alwayz stuck at this stage...Already tried using DFU mode and many times...but always stuck at this stage. However in iphone APPLE LOGO and Status bar is coming but not processing ahead!

"Waiting for iPhone... " alwayz stuck at this stage...Already tried using DFU mode and many times...but always stuck at this stage. However in iphone APPLE LOGO and Status bar is coming but not processing ahead! Even my device is not jailbroken.
iTunes recognize this device and giving option for Restore. i go for it and in the continue process WAITING FOR iPHONE /// at this stage it stuck.. and keep serching like for something and in the iPhone APPLE LOGO and Status bar showing..but not processing further.

Shaishel,
Did you resolve this? I am having the same problem! Let me know if you have any suggestions.
Thanks

In 1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar shows 100% but task is still running. Where it says x of y items complete, x is y. This also happens in Windows 7 with Bootcamp. Please explain.

In >1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar sometimes shows 100% complete but task is still running. Under the status bar, where it says something like "x of y items complete," x is greater than y. This also happens in Windows 7 with Bootcamp. Why does this happen?

In >1 applications, e.g. Norton Virus Scan, and Macware DiskToolsPro, the status bar sometimes shows 100% complete but task is still running. Under the status bar, where it says something like "x of y items complete," x is greater than y. This also happens in Windows 7 with Bootcamp. Why does this happen?

My Process status is in progress but all the subprocess are completed

Hi,
I have a problem, i started a process with 4 subprocess. One of the Subprocess didn't finish its activity and it's status remain "in progress".
In the context data of subprocess i didn't see any information. Now if i try to suspend or cancel it i get this error message:
Error during the process.Number and instance Id's of the processes which can not be suspended
how can i delete it from Process istance?

I tried to suspend or cancel the process but i can't do it.
the system told me the error in the first post.
if i go in the history of process i have this log:
10-gen-2011 16.10.42 Application result Web service operation taskRun of interface http://test.com/test/#BPM has completed successfully Application
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user <service user>." System
10-gen-2011 16.10.42 Data object updated Data object ProcessContext has been updated Data flow
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user SAP_BPM_Service." System
10-gen-2011 16.10.42 Application launched Web service operation taskRun of interface http://test.com/test/#BPM has been called successfully Application
10-gen-2011 16.10.42 Application result Web service operation getTaskKey of interface http://test.com/test/#BPM has completed successfully Application
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user <service user>." System
10-gen-2011 16.10.42 Data object updated Data object ProcessContext has been updated Data flow
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user SAP_BPM_Service." System
10-gen-2011 16.10.42 Application launched Web service operation getTaskKey of interface http://test.com/test/#BPM has been called successfully Application
10-gen-2011 16.10.42 Process initiated Processo 'New Pool 0' iniziato Control flow
10-gen-2011 16.10.42 Data object created Data object TextVariables has been created Data flow
10-gen-2011 16.10.42 Data object created Data object Administrators has been created Data flow
10-gen-2011 16.10.42 Data object created Data object Auto_PotentialOwners has been created Data flow
10-gen-2011 16.10.42 Data object updated Data object ProcessContext has been updated Data flow
10-gen-2011 16.10.42 Data object updated Data object Auto_ExcludedOwners has been updated Data flow
10-gen-2011 16.10.42 Data object updated Data object ErrorHandle_PotentialOwners has been updated Data flow
10-gen-2011 16.10.42 Data object updated Data object ErrorHandle_ExcludedOwners has been updated
with no error, but for now the subprocess still in progress and it's don't finish.

Error 201 while installing CC, I tried a lot, but all didn't help...

Running CreativeCloudSet-Up.exe: error 201: "Occurs when bits swapped on server when the download is paused and when server response is bad."
Situation: home network with all connections wired.
I did all of the following:
- windows firewall switched off, didn't help
- antivirus software switched off, didn't help
- Internet options, LAN settings with or without check boxes, didn't help
- started windows in save mode, with connections, didn't help
- in a netwerk monitor (NetworkMiner), I see a call on port 443, but no response (601 bytes sent)
- switched to another router on another home network, didn't help
- renamed folder "OOBE" into "OOBE.old" (in folders "C:\Users\username\AppData\Local\Adobe" and "C:\Program Files (x86)\Common Files\Adobe"), didn't help
- renamed folder "AAMUpdater" into "AAMUpdater.old" (in folder "C:\Users\username\AppData\Local\Adobe" and "C:\Program Files (x86)\Common Files\Adobe"), didn't help
- run CreativeCloudSet-Up as administrator, didn't help
From the log file PDApp.log, I only see this:
11/16/14 00:27:23:729 | [INFO] | | ASU | OPM | OPM | | | 1404 | Schema version and schema compatibility version are same or greater than current
11/16/14 00:27:23:744 | [INFO] | | ASU | OPM | OPM | | | 1404 | _opm_handle_OPDReturnedStatus called with opdStatus as:0
11/16/14 00:27:23:744 | [INFO] | | ASU | OPM | OPM | | | 1404 | No Record found for the input fields in opm_getValueForKey
11/16/14 00:27:23:744 | [INFO] | | ASU | OPM | OPM | | | 1404 | Released OPM refrence successfully in opm_freeLibRef
What else can I try?
Please help...

Eventually, this helped me:
See http://support2.microsoft.com/kb/813444
"You cannot log in to or connect to secured Web sites in Internet Explorer"
The last step "method 7" helped me:
Start a command prompt as administrator, then type:
sfc /scannow
I hope this helps someone and saves time to search!
@Adobe: please add a list of concrete steps to check when error 201 occurs.

PDFs load, I can see the status bar fill up, but dont display, Using Adobe Reader X on XP

Upgraded to Firefox 4, using windows XP abd Adobe X reader. PDFs load but dont display, followed the instructions but did not help

Adobe Reader X can only save reader-enabled forms. Adobe Reader XI can save all forms.

Iphone 4 - IO6 Problem: My apps are stuck on "loading" - no new apps will install. Status bar is stuck, so apps will not install. How to fix?

Iphone 4 - IO6 Problem: After upgrading to the absoulte crap that is IO6, one of my apps is stuck on "loading" and no new apps will install. If I delete this "loding app" (which happens to be iMovie), the next app that tries to install gets stuck on "loading" and every other app gets stuck on "waiting." How to fix??

I had the same issue and tried several options like rebooting, resyncing, deleting and reinstalling apps, restarting the network connection but none of them worked. Eventually I opened iTunes on my iPhone (not on Mac) to find that it had two pending downloads that was stopping the rest of the apps from loading fully. You need to cancel them by swiping left to right over the listed apps and select cancel/delete. It worked for me. Good luck!

No page loading: blue status bar goes across and then stops

Tried disabling prefetching and another DNS server. The problem still exists. Pages are not displayed.

OK..found out what DNS is. Will research how to check my settings. Thanks. will let you know the outcome.

ITunes 10.5 for windows 7 64-bit installed OK but all files now SILENT. Sound works OK on Windows Media Player.

Installed iTunes 10.5, looks fine but All files now silent. Sound works OK in other programs.

Installed iTunes 10.5, looks fine but All files now silent. Sound works OK in other programs.

Hidden status bar

<img src="http://i53.tinypic.com/260pmxg.jpg" border="0" alt="missing status bar">
The status bar went missing after I installed the QuickToolbars (https://addons.mozilla.org/en-US/firefox/addon/quicktoolbars) extension, and hasn't returned after uninstalling the extension. I looked through about:config for clues and found two entries left over after I'd uninstalled it. Removing them didn't help.
I went through each of the following:
checked the View | Status Bar setting; uninstalled the extension; restarted FF; restarted the PC, upgraded FF to 3.6.15; disabled all extensions; looked through about:config; logged in here and asked this question.
The bar is not hidden behind any other desktop item (see the screenshot).
How do I get my status bar back?

Fixed now.
While reading about the localstore.rdf and Safe Mode, I decided to reset the toobars to see what would happen. It restored the staus bar.
I haven't noticed any other effects.

Safari status bar no longer shows page load progress

Hi... Though it's been this way for a while now, perhaps since the start of whatever Safari version came along with OS X 10.8 Mountain Lion ??, I've finally become curious enough to ask about the following...
In times gone by, the Safari status bar at the bottom of the page would show page loading progress... You know, the old xx out of yy items complete or something like that??? But now, nothing... Nothing at all in the Status Bar while a page is loading... Nor is there a spinning gear in the URL line to show you something is going on... Instead, all there is is the blue progress bar that slowly moves left to right across the URL box to show you what is happening... And often that blue bar stalls where it just sits for quite a while... And when that happens I never know the details of what is going on...
Do I have something set up wrong??? Or did Apple decide we don't need to know what's going on while pages attempt to load??? I sometimes quit Safari when I have a secure page log on that appears to stall and all I have as feedback is a stalled blue progress bar...
All I ever see light up in the status bar is the URL of a link I might hover over on a page... Otherwise, nothing... That doesn't seem right... Again, am I doing something wrong in the Status Bar set up or is that all the Status Bar ever shows now???? And if the latter, why would Apple have chosen to stop letting us observe page loading progress??? At least that used to tell me something was happening.. A blue progress bar that stops moving doesn't tell me anything useful...
Any thoughts or help on this would be much appreciated... thanks... bob...

Mountain Lion 10.8.2
Safari 6.0.2
Robert Paris wrote:
Do I have something set up wrong???
Nothong is set up wrong.
That is the way Safari works as far as I know.
Best.

JClient status bar doesn't react to some panels?

Hi,
JClient 9.0.5.2/10.1.2beta
The status bar doesn't react to all data bound panels in a same binding context?
I have a main form with a tabbed panel.
Each tab panel is composed of ADF bound panels.
All those bound panels receive their Binding Context from the main form.
Everything works fine:
- all navigation bars are synchronized
- all master-detail relations are respected
Except the status bar.
In some panels the status bar doesn't react to navigation or when an editable field has focus.
Examples:
The 2 first panels are based on the same ViewObject/iterator.
The first panel is based on a table template, the second on a single record template.
The status bar works for the first panel but not for the second?
The status bar doesn't react to the third panel events:
on this panel all navigation bar buttons are disabled except the transaction buttons.
The ViewObject is a detail of a master ViewObject in a different panel (in the master panel the status bar works fine)?
The API says:
When a dataItemName is specified, it tracks the status of the rowset to which it is bound; otherwise, it tracks the status of the data bound control (Rowset) which currently has the focus.
In my case in the main form I didn't specify the dataItemName.
I tought that the status bar management was implicit => all data bound events in a same BindingContext are displayed by the status bar.
In some cases it doesn't seem to be true.
To make it work should I change the model of the status bar?
Your help will be appreciated.
Fred

SOLUTION I FOUND:
I noticed in the XML files of the panels that didn't react, the main iterator wasn't first in the list.
I moved those iterator definitions to the beginning of the their XML file and after that, the status bar works as expected.
I found this by tracing the iterator bindings of each panelBinding.
I wrote a little method in the main form for this purpose.
Let's say you have following panel reference in your main form.
private PanelEmpVO1 panelEmp = new PanelEmpVO1();
After setting the binding context of this panel, you call the method:
printPanelIterBindingList(panelEmp.getPanelBinding(),"panelEmp");
The method:
public void printPanelIterBindingList(String panelName, JUPanelBinding jpb)
ArrayList ibl = jpb.getIterBindingList();
System.out.println("printPanelIterBindingList BEGIN, panelName: "+panelName);
for (int i = 0; i < ibl.size(); i++)
Object ob = ibl.get(i);
if (ob instanceof JUIteratorBinding)
System.out.println("iterBindingList, panelName: "+panelName+", JUIteratorBinding: i = "+i+", name = "+((JUIteratorBinding)ob).getName()+", VOName: "+((JUIteratorBinding)ob).getVOName()
+", BindingContainer name : "+((JUIteratorBinding)ob).getBindingContainer().getName());
else
if (ob instanceof DCIteratorBinding)
System.out.println("iterBindingList, panelName: "+panelName+", DCIteratorBinding: i = "+i+", name = "+((JUIteratorBinding)ob).getName()+", VOName: "+((JUIteratorBinding)ob).getVOName());
else
System.out.println("iterBindingList, panelName: "+panelName+", unknown object: i = "+i+", object class name = "+ob.getClass().getName());
Remark:
For master-detail panels, you must get the panelBinding of each panel.
Regards
Frederic
PS I'm not from Oracle, it helped me, I hope it will help you.

Install blue status bar went gray, but all is OK...

Similar Messages

Maybe you are looking for