Install boot camp

Hi,
I have been using parallels now for a while and it just seems too temperamental for doing important university work.
How do I install boot camp on my new mac book? Are there any important things I should no when installing - i.e. size of partition has been mentioned to me.
Thanks

Joe:
How do I install boot camp on my new mac book?
The Boot Camp installation guide is [HERE|http://www.apple.com/support/bootcamp>. It should be able to answer questions related to installation. Of course these discussions have several other information on boot camp/ windows. All you need to do is launch a search on them.
Are there any important things I should no when installing - i.e. size of partition has been mentioned to me.
Too many people make a partition very small and then regret having done so. My recommendation is to have a partition of at least 32GB. It is highly dependent on what your will be installing on Windows XP/Vista.
Axel F.

Similar Messages

Install Boot Camp on 3rd drive (3TB)?

I just installed a new 3TB drive in my early 2008 Mac Pro, which is runing ML. I would like to use Boot Camp to install Windows 7 on a 300 GB partition on that new drive and to have it bootable. I would like to retain the rest of the drive for use in OS X. Is this possible?
Also, it says the following in the "...problems creating a partition" section of Boot Camp Installation manual:
If you have a Mac Pro with more than one internal disk and you want to install Boot Camp on a disk that isn’t in the first hard drive bay, remove the drives in the lower- numbered bays. You can reinstall the drives after you install Boot Camp
Given that Boot Camp Assistant is running in OS X & OS X is on the 1st drive, then at what point would I remove the 1st & 2nd drives?
Thanks,
Bev in TX

Okay, after rereading a number of messages in this forum, I think that I finally understand what is going on. Namely, if I want to install MS Windows 7 on a drive other than #1, then I would:
Temporarily remove all other drives.
Install MS Windows 7 using the installation media (DVD).
Install Boot Camp drivers that were previously saved on a USB flash drive or DVD.
Shut down Windows.
Reinsert the other drives.
I have an older 300 GB data drive (#2), which I could:
Move the data from this drive to the new 3TB drive.
Install Windows as above.
Is this correct?
Thanks,
Bev in TX

How to install boot camp on my macbook pro?

How to install boot camp on my macboo pro 15-inch early 20011?

Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/

How to install Boot Camp on a MacBook Pro 2011

Well I bought a new MacBook Pro and I have constantly been trying to install Boot Camp.
When I open Boot Camp it shows me the Introduction, then it asks me if I would like to install the Lastest Windows Supports Software From Apple, and if I would like to Install Windows 7. I tick both boxes and then another page opens.
It asks me if I would like to install it to a DVD or CD, or if I would like to install it to an external hard drive. Now, I have tried both of these, and they both show a page asking me how much space I would like to be Mac space, and Windows space. After I've chosen how much I would like, I click install. After about 30 seconds, a message pops up saying the installer disk could not be found, please insert the installer disk and wait a few seconds, and the click install again.
I have done this many times, and that same message pops up. Please, if any of you people out there have the solution for me it would be gratefully apreciated.
Thanks.

No, it doesn't. You have to purchase the Windows 7 installer. Windows is not included with the computer. Did you discuss the matter with someone when you bought your computer? If you did they should have told you that you would need to buy Windows 7. If you had asked while you were purchasing the computer then you could have paid for Windows at the time and had it installed for you.

I am trying to install Boot Camp but it says I haven't got enough free space to make a partition, however in disk utility it says I have 27GB free!

I am trying to install Boot Camp but it says I haven't got enough free space on my start up disk - that I need at least 10GB free space - however in disk utility it says I have 27GB free!

if your SSD is only 60 GBs, then you don't have space on which to install Windows. That 27 GBs is space you need to have for adding files you create, music you download, added applications, pictures, etc. You need to maintain at least 10 GBs as free space for OS X, plus you need space for files OS X will create and add to over time.
Your 60 GB SSD is just a minimum usable size for OS X. There isn't sufficient space to also support Windows which requires close to 25 GBs of the 27 GBs you still have free. Sorry, but that just doesn't really work well.

Can't install boot camp(Am in desperate need of help!!!)

Ok, the story, I will try to make it short:
-Got my Imac a month ago. Installed Boot Camp Vista Home Premium 64 Bit. No problem. Ran smooth.
-Later I got VMWare fusion and decided to check it out. Didn't like to to much, but now I can't install Boot Camp.
-When using Boot Camp assistent, it creates my partition(which 200 GB) Fat32! The problem is, when it wants to boot to install. It ejects the Vista installation DVD! No matter what I do.
-*If I hold down the ALT key(option button) during start up*, it will show a grey screen with two options(The Macintosh HD and the Windows Partition). Selecting the Windows partition gives a black screen with an error; *"non-system disk press any key to reboot"* Only problem is that the keyboard was dead or frozen so had to crash the machine.
-Pressing D on start up to enable the *Apple Hardware Test* showed no problems.
-Pressing Alt + Cmd(command) + P + R to *delete the NVRam and PRAM*, did not have any effect. I think I did it right though, because there came a second start up sound.
-Pressing S + Cmd(command) on start up to run *User Single Mode*, with the command; "/sbin/fsck -fy" did not reveal any problems either, except for a weird long messege that kept coming up, and which interupted the line I was writing on several times. The messege was as follows: +":/root# AppleUSBEHCI[0x6e8t000]:: Found a Transaction Past the completion deadline on bus Oxfd, timing out!(Addr: 6EP:4)"+
*Ran a program called Partition Inspector;*
* Report for internal hard disk *
+Current GPT partition table:+
+# Start LBA End LBA Type+
+1 40 409639 EFI System (FAT)+
+2 409640 1531068455 Mac OS X HFS++
+3 1531330600 1953525127 Basic Data+
+Current MBR partition table:+
+# A Start LBA End LBA Type+
+1 1 409639 ee EFI Protective+
+2 409640 1531068455 af Mac OS X HFS++
+3 * 1531330600 1953525127 0c FAT32 (LBA)+
+MBR contents:+
+Boot Code: Unknown, but bootable+
+Partition at LBA 40:+
+Boot Code: None (Non-system disk message)+
+File System: FAT32+
+Listed in GPT as partition 1, type EFI System (FAT)+
+Partition at LBA 409640:+
+Boot Code: None+
+File System: HFS Extended (HFS)
+Listed in GPT as partition 2, type Mac OS X HFS++
+Listed in MBR as partition 2, type af Mac OS X HFS++
+Partition at LBA 1531330600:+
+Boot Code: None (Non-system disk message)+
+File System: FAT32+
+Listed in GPT as partition 3, type Basic Data+
+Listed in MBR as partition 3, type 0c FAT32 (LBA), active+
I don't know what any of this means, but I suspect the Boot Camp partition is the last one. I wonder what "Boot Code: None(Non-system disk message" means!?
*When running diskutil:*
*diskutil list*
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *931.5 Gi disk0
1: EFI 200.0 Mi disk0s1
2: Apple_HFS Macintosh HD 729.9 Gi disk0s2
3: Microsoft Basic Data BOOTCAMP 201.3 Gi disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: FDiskpartitionscheme *931.5 Gi disk1
1: WindowsFAT32 My Book 931.3 Gi disk1s1
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: FRMCxFREDADVD *3.5 Gi disk2
*And when I searched on the boot camp disc specificaly:*
Device Identifier: disk0s3
Device Node: /dev/disk0s3
Part Of Whole: disk0
Device / Media Name: Untitled
Volume Name: BOOTCAMP
Mount Point: /Volumes/BOOTCAMP
File System: MS-DOS FAT32
Partition Type: Microsoft Basic Data
Bootable: Is bootable
Media Type: Generic
Protocol: SATA
SMART Status: Verified
Total Size: 201.3 Gi (216110792704 B) (422091392 512-byte blocks)
Free Space: 201.3 Gi (216109285376 B) (422088448 512-byte blocks)
Read Only: No
Ejectable: No
Whole: No
Internal: Yes
Other things I tried:
-Tried going into Startup disk, to force Vista to install from boot up, but it ejected upon startup anyway.
-Tried rebooting while holding down "C" to force a startup from a CD/DVD. Vista installation DVD still ejected.
-Tried reinstalling Leopard with the Leopard Installation Disc 01, but it also ejecred upon rebooting to install! < This lead me to believe that it's my Superdrive that is messed up, but it plays DVD Movies just fine, and I even just now just burned the Vista installation DVD to my desktop in a .dmg file. So I am not sure if that is it!
-I tried taking a different Windows Vista DVD(Windows Vista 32 Bit Home Premium) to see if it could install from that. It could not, and ejected upon startup like the Leopard and 64 Bit Home Premium Vista Installation DVD!
I am new to Mac, but I am desperate after getting boot camp to work again. I have litterly been trying to figure this out for days, and I can't get it to work. I tried to call Apple but they couldn't help me.:( I could really use your help. I just want it to work.
And speaking of working, I haven't been to work for two days, because I have been home trying to figure this out. It's critical that I get boot camp working. So please, mates, can't you help me.
I simply don't know what to do:(
Cry
-Oil Pedestal

Does [this firmware update|http://www.apple.com/downloads/macosx/apple/firmware_hardware/imacefifir mwareupdate13.html] apply to your machine? If so, putting it on may fix the boot from DVD problem.

Cannot install Boot Camp 3.2 upgrade for Windows 7 64 bit

I recently installed Windows 7 64 bit on my macbook. I also installed Boot Camp 3.0.1 after Windows 7 installation, however, WiFi did not work. Therefore, I needed to upgrade to the latest Boot Camp 3.2. However, when I tried to install Boot Camp 3.2 upgrade for Windows 7 74 bit, I got an error message saying that I needed Boot Camp 3.1 installed first. I CANNOT find Boot Camp 3.1 upgrade for Windows 7 64 bit on Apple website at all. Can someone please help me on this? Is there a way to get the complete Boot Camp 3.2 package that can simply be installed on version 3.0.1??

here is the link to bootcamp 3.1 for windows 7 64 bit http://support.apple.com/kb/DL1336 .. and no there is no package that can be applied to the windows side to go from 3.0.1 to 3.2

Blue screen of death after installing Boot Camp on Windows 7

Hello and thanks for the help!
Brnad new user to Boot Camp here. After a new install of Windows 7, I install Boot Camp but then when rebooting Windows I get the blue screen of death. When letting Windows attempt a repair, it fails and I am forced to Recover Windows 7 to a state before I installed Boot Camp.
Help!?

Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

Can I install boot camp on new startup drive?

I find I have to use Windows to administer a Network Solutions
hosted and built website. They claim to support Mac OS but
there are issues and they tell me that Internet Explorer is the
more reliable browser to use. So I'm wondering if I should
replace my primary drive with a new one and install Boot
Camp. Is this a workable solution? Should I consider one
of the virtualization programs?
Tom

I would suggest trying a VM first, and I would suggest using VirtualBox (as it is free), it will work but with a slight performance hit. If the hit is more than you can stand go the Boot Camp route.

I don't have my Windows XP disc how can I install Boot Camp? I do have Windows Millennium disc.

I would like to install Boot Camp on my MacBook. I can't find any XP discs in my files although I have legal XP on my old PC. I do have a copy of Windows Millennium. What to do?

Windows 7 is more stable. OEM Windows 7 Home is $100.

Can't Install Boot Camp 3.0 on 64-bit Windows 7 system

I have 64-bit Windows 7 Ultimate running on HD#2 on a Mac Pro 2,1 system (2006). I've installed the Boot Camp 2.0 drivers after I installed Windows, I forget why I needed them, maybe for an old Apple keyboard.
Anyway, I can't install Boot Camp 3.0 from the Snow Leopard DVD - the installation runs to completion, but generates various error messages, one of which says that Boot Camp 3.0 64-bit can't be installed on this system.
I really need 3.1 now because my Magic Mouse won't work, and I can't sync Mobile Me.
Is there a fix or a workaround to upgrade Boot Camp on this system? Should I use Windows Uninstall to get rid of Boot Camp 2.0 first?
If it matters, Windows 7 is the upgrade version from Vista Ultimate.

http://www.apple.com/support/bootcamp/
Click on "Downloads", (underneath the big hard drive icon), scroll down a bit and there is a link for "Boot Camp:Upgrading to Windows 7" and another link for Version 3.1 which you need for 64 bit to work right after 10.6.4(?). I would just try downloading the Boot Camp 64bit 3.1 file and try that first if you already have Window's 64 bit installed.
Don't forget you need a WIRED keyboard AND mouse if you need to reinstall Window's.
Here's another link that is all over the place on which machines and which Windows works and what doesn't...
http://support.apple.com/kb/HT1846
Hope that helped.....

Unable to install Boot Camp Update 3.1 on Windows 7 32-bit on MacBook Pro

I have Windows 7 Professional 32-bit on my MacBook Pro and have Boot Camp 3.0 now. I've tried to install Boot Camp 3.1 both using the Apple Software Update on Windows and the installation from http://support.apple.com/kb/dl996 but it won't work. Are there any ways to solve this problem?
Message was edited by: Ho Ren Sen

Hi and welcome to Discussions,
do you have any kind of Remote Viewing software installed, like LogMeIn or Go To My PC ?
These are known to cause trouble with the the BC Driver packages.
Check if there are additional Graphics Adapter shown (apart from the "real" one).
If so, uninstall the remote software, do the 3.1 update and then reinstall.
Regards
Stefan

Unable to install Boot Camp 3.1 on Win 7 on iMac Intel (suggestions?)

I got the OEM version of Windows 7, professional and 64 bits, and installed it via Boot Camp Assistant. Got it running (no keyboard recognition), and tried to install Boot Camp for Win 7 via the Apple site:
"Unable to install 3.1, needs 3.0".
No problem, insert OSX disk (10.6.3), click, aaand:
"Boot Camp 64bit is not supported on this model"
Uh?,... I thought that my machine was supported (it's running Win7 64bits!),... any suggestions?. Am I doing something wrong?. Any help will be appreciated.

Unfortunately I cannot answer your question but I'm hoping someone can help us. I went a step further than you. I have an iMac 8.1 Intel Core 2Duo 2.8 GHZ Processor (early 2008). I spoke with Apple Customer Support and made it clear that I had Windows 32 bit and 64 bit software and wanted to install on my iMac and MBP. The agent told me to order Snow Leopard for the iMac. I found out tonight I cannot use 64 bit on this particular iMac even though Customer Support had the serial number and data when we ordered the Snow Leopard disc.
So, I partitioned the HD equally between Mac and Windows. Boot Camp installed Windows 7 with no problem and then encountered the same thing you did. Install Boot Camp 3.0 before 3.1. When I put the brand new Mac OS X Snow Leopard from Apple in the iMac it said 'not supported'. I tried to install but it won't.
Funnything is Win 7 seems to be running. I am having problems with the numeric keyboard on the UBS keyboard. I haven't really tried to do too much.
My question to append to yours is how do I go about uninstalling Windows 7 and installing Windows 7 32 bit?
I'm sick about this but at least I believe I can install the 64 bit on my current MBP. I wanted it on both my computers.

Unable to install Boot Camp and Windows 8.1 on Mac Mini

Hello,
My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
Thanks,
Doug

Poking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
So, I'm doing exactly what I did before (I think), but now the windows installer won't start.

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Apple Boot Camp Support
Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
You need Apple drivers. And you then need to add on your own audio driver.
You can run Assistant at any time to download and save a set of drivers.

Black screen after installing Boot camp Win7 on iMac 27 late 2009

I've run out of ideas as to how to fix this problem. I have a late 2009 iMac quad i5, Mountain Lion, 12GB RAM, 1TB HD (recently exchanged under extended warranty).
I stopped counting how many times I have tried to get this up and running but I followed a whole bunch of 'how to's' on the net, including the official Appple guide, but I always end up with a black screen. I insytalled it from scratch using both, Apple drivers on CD and SD card and I can confirn that they installed correctly during my last try. That time I first installed Win Vista, then upgraded to Win 7. I took out the install DVD after first restart and left the SD card in its slot (correctly named, as suggested by Apple). the installation finished, the screen went dark for about 5 min, then the computer rebooted, the screen went dark again for another few min and after that the vomputer restarted again but this time all stayed dark and nothing happened for the better part of an hour.
I also restarted from the Win install disk and tried to remove the ATI drivers using command lines, as suggested in one post.
I need to run Win in Bootcamp because some application I use are very demanding so I need Win to run natively. In an earlier attempt I managed to boot Win7 from the Bootcamp partition in Parallels and I installed the Apple Drivers in that environment but it still resulted in a black screen. I also tried to remove the ATI drivers from Drivers directory manually in MacOS mode but the System wouldn't let me edit the Syustem folder at all, not even in Root user mode.
I understand that I'm not the only one with problem and I feel for you, but please refrain from "me too" posts becuase it doesn't really solve my problem. Thank you.

I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
I don't know what links you have so i'll just include everything:
Installing boot camp on a Late 2009 iMac:
http://support.apple.com/kb/TS3173
Direct link to Late 2009 iMac-specific Windows drivers.
http://support.apple.com/kb/DL995
I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
Hope this helps.

Install boot camp

Similar Messages

Maybe you are looking for