Install both 32 and 64 JVM on the same machine

Hello
I wanted to know if by installing both 32 and 64 JVM (on a 64 bit system, of course), would cause any damage. I have installed the 64 version, but Eclipse doesn't want to start at all, so i was hoping to make it work my installing a 32 bit version and making eclipse use it.
I am not sure how this will affect everything, because i will be using Jboss and Glassfish.

Then please post into the CodePlex issues
You may want to contact https://www.codeplex.com/site/users/view/kevinidzi and ask for a side by side support
Arthur My Blog

Similar Messages

  • How to install iFS and iAS on the same machine?

    I have successfully installed iFS on a Windows NT 4 machine. Now, I would like to install iAS Enterprise Edition on the same machine. The installation guide for iAS says that I should first deinstall all products from the default ORACLE_HOME. I have not found a clue as to what to do if I want to keep the software already installed.
    Would it work if I tried (after installing iAS) re-install iFS using different ORACLE_HOME directory?
    Is there a white paper or any other document that would clear up the issues involved in installing Oracle products in ORACLE_HOME?
    Thanks a lot,
    Marek

    You can install IAS on the same machine that Oracle and IFS are on. Install IAS into a new Oracle Home (i.e. D:\IAS).
    This worked for me.
    I am still waiting to hear how (look for my post about 20 below yours) how to configure IFS to use the Apache Web Server that is part of IAS.
    Good Luck.
    Maybe one of these days Oracle will create an IAS discussion forum. This is my third request and I haven't heard anything back from them yet.
    null

  • What is the best way to have access to OSX and OS9 from the same machine?

    What is the best way to have access to OSX and OS9 from the same machine?
    Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly.
    G5   Mac OS X (10.4)  

    And here is the prove for Edwin's message: Macintosh: Some Computers Only Start Up in Mac OS X

  • Is it possible to run VLM and lmtools on the same machine

    hi together ... is it possible to run VLM and lmtools on the same machine without any problems?
    the running system will be Windows Server 2008 R2 x64! maybe we will install the license server on the virtual server.

    Hi SvenNittmann,
    in general, it should be possible to run both tools (VLM and lmtools for FlexNet) on the same machine. But I wouldn't recommend you this way, because NI VLM is also build on top of FlexNet and sometimes you will receive ugly problems with the installation of both tools on the same PC. It is possible to use VLM in a virtual machine without any problems or restrictions. NI provides information about the usage of VLM in a virtual machine, like you can see here:
    Volume License Manager on a Virtual Machine - National Instruments
    http://digital.ni.com/public.nsf/allkb/5730FDDC97F9157E8625755F00749CFF?OpenDocument
    I also use VLM in a virtual machine and I could recommend you the same solution.
    Regards, Stephan

  • Designer 6i and 10g on the same machine?

    I have Designer 6i and corresponding repository on my machine.
    The problem with 6i I can't save diagramm in HTML format
    I believe I can save in HTML format in 10g or other?
    Can I install on the same machine 10g designer?
    should I configure new repository?
    TIA

    See my update on your earlier question.
    As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
    Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

  • Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

    I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished.  For the moment I just need some "high level" guidance, little details can be worked out once I know
    which direction I will go.  I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time.  DFS can stay installed for maybe
    future purposes but clearly I wouldn't need the DFS Replication with only one machine.
    Here's a few details of the environment....
    1.  DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present.  But likely they will be gone and the DFL elevated before I start on the File Server project
    2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server.  Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
    and maybe the same IP if not too much trouble.  This way the existing shortcut would continue to work with the new 2012R2 File Server.  The UNC path represented in that shortcut is also configured into one or more of our major business applications,
    futher emphasizing the need to keep the UNC path the same throughout the process.
    3. The facility runs 24/7/365 but is "light" on weekends.  The political environment is such that there is little to no tolerance for any down time at all.
    4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
    Thanks for any suggestions.
    Phillip Windell

    Hi Sharon,
    I've done some more reading and have a few new ideas to run past you....
    Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
    to flip over to the new server.  DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
    the old server to 2003R2 first.  As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
    Thanks for the reg info on the Shares.  I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job.  I'll probably export that Key as a
    safety move whether I use it or not.
    Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
    1. Remove the DFS Replication Object (optionally remove DFS Services completely)
    2. Rename the old File Server to something else and set it to DHCP
    3. Rename the new File Server to the name I want to use and give it the IP the old server had.
    How does that sound?
    Phillip Windell

  • How to instal FMS and Wowza Server on same machine.

    I want to to instal FMS and Wowza Server on same machine any one know about this please guide me about this.
    Thanx in advance.

    I have on one server installed both red5,fms and wowza
    first install red5 ( by default it uses port 1935 obviously )
    then let say wowza , with installation choose port 1936 ( make sure you open this port )- you app will run on rtmp://your-ip/domain.com:1936
    then fms - choose port 1937 ( here again make sure you open this port too ) - rtmp://your-ip/domain.com:1937

  • Is it ok to install Report developer suite on the same machine?

    Hello All,
    Recently I have upgraded my Oracle Forms 5.0 to Form 6i.
    Now I want same process with my reports.
    Our current reports version is 3.1.
    1) Is it possible to upgrdae report 3.1 to report 6i?
    2) I have installed my form 6i developer suite in window XP. Is it ok to install Report developer suite on the same machine?
    3) if answer of 2 is yes, Do I need to install in another home?
    Please note: My main goal is to upgrade reports in 10g.
    But I think we can not upgrdae report 3.1 to 10g directly. So I am going 3.1 to 6i and then go for 10g.
    Regards,
    D

    still waiting for response.
    Diana

  • Can i run 9ias versions 1 and 2 on the same machine

    i need to install 9ias versions 1 and 2 on the same machine but in separate databases, is this possible? if it is possible are there any issues that i need to be aware of?

    You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
    *http://portableapps.com/apps/internet/firefox_portable#legacy
    *http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
    *Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

  • How to install oracle817 and form6i on the one machine

    How to install oracle817 and form6i on the one machine?
    Machine is P4/W2K
    Thanks a lot

    You can do this as long as you install them in different Oracle homes.

  • CS3 Bridge and CS4 on the same machine.

    Hello Everyone,
    I have adobe photoshop CS3 and Illustrator CS4 on my machine.  Any known issues for running bridge CS3 and CS4 on the same machine?  Some experts at telling me not to use Photoshop CS3 with Bridge CS4, just wondering.  Thanks for you replies.

    Bridge is not really a stand alone product, and tuned to work with its current version of PS.  Also, Bridge CS4 has some features changed and/or added.  So if using CS3 Bridge you might have aspects that don't work with PS CS4.
    I would keep CS3 on the machine if you don't need the HD space, until you feel you no longer need the older version.  But use them as a pair as intended.  Also, only have one Bridge running at a time.
    I did not upgrade to CS4, but from what I have read I see no reason to use Bridge CS3 as the upgrade is faster, less prone to crashes, and has added features.
    CS4 PS on the other hand can be tricky if you don't have a newer computer with a good video card.

  • Install Oracle Application Server on the same machine with Oracle Database

    Hello!
    I have already have installed on my laptop the oracle Database 10g, and i want to install on the same machine Oracle Application Server; can I do that? After i look on some threads on this forum I understand that all I have to do is to change the default port 1521 of the database to antoher ..let's say 1523...how can I change the port? what files do i have to modify? Oracle Application server can work in good conditions with Oracle XE or I will have the same problem?
    My SO is Windows XP Professional SP II, all updates, 512RAM, 2Ghz-CPU
    Thanks!

    Well, you'll have some problems to run simultaneously Database and AS with 512 Mb...
    Apart from that, you don't need to start two listeners, you can use just one (the highest version) for both DBs.
    If, for any reason, you want to use two, you can change the port within LISTENER.ORA file, normally in ORACLE_HOME\network\admin.

  • Install Discoverer AND Portal in the same Middletier Instance

    Hallo,
    when installing AS 10.1.2 i have several install options.
    When choosing BI / Discoverer i have no Portal in the middletier after the installation finished.
    I could install another middletier instance with using the portal option but i want to have Portal installed as component in the existing middletier.
    How can i achive this ? (install a single componant into an existing middletier)
    Thanks,
    Jochen

    You cannot do that. You have to do a fresh install of 10.1.2.0.2 and choose Business Intelligence and Forms install type. This install type provides you the ability to install both Discoverer and Portal in the same Oracle Home. Seems like you installed Discoverer from BI CD, which gives you the ability to just install Discoverer. Instead use the EE download or Oracle Application Server main CDs from the CD pack.
    Regards
    Pavna

  • Developer 1.6, 2.1 and 6i on the same machine does not work

    I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
    Is trying to find it in the path of the Developer 2.1 and of course it does not work.
    The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
    It is possible some workaround even if running one version at a time.
    Thanks.

    I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
    Is trying to find it in the path of the Developer 2.1 and of course it does not work.
    The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
    It is possible some workaround even if running one version at a time.
    Thanks.

  • Question: Installing Delivery and Management on the same box?

    Hi,
    1. Can we install WCS 11g Management and Delivery instances on two separate Tomcat instances hosted on the same machine?
    2. If yes, do the instances need separate database or can share a single database having separate schema?
    Thanks
    Arijit

    Arijit Basu wrote:
    Hi,
    1. Can we install WCS 11g Management and Delivery instances on two separate Tomcat instances hosted on the same machine?Yes
    2. If yes, do the instances need separate database or can share a single database having separate schema?Yes, the can share the same database host with separate schema's.
    >
    Thanks
    ArijitHowever, this is not recommended for production environment as this is a not scalable nor secure architecture.
    Cheers,
    Rodney

  • Can i install developer9i and developer6i in the same computer

    Dear Friends
    I have installed the developer suit 9i, and also I would like to install developer oracle 6i in the same
    workstation .Can I do that ?if can ,can you give me the replay in details , very urgent
    Best regards
    LoLo

    Does anyone know if there is a particular order in which you should install these items, 9i and 6i?
    It only seemed to work for me installing the database subsequent to the Forms. My first install in which forms was installed after the database, featured a recurring windows error until I dropped and reloaded the database.It could have been a bad database, but it was working just fine.
    Bradley

Maybe you are looking for

  • Unable to Install Flash Player 11.7.700.169 on OSX 10.7.5

    I have tried everything I can think of to install your new version. On Sunday, I downloaded the 11.7.700.169 installation .dmg. When I double clicked on the Install Adobe Flash Player, it reported: Creating image Downloading image Installing Flash Pl

  • DVD Trapped in Mac Mini! Help please!

    Hello, I've got myself into a bit of a sticky situation with my mac mini so I hope someone can help... I inserted a dvd disc which the drive cannot read. The drive mechanism is continually trying to read the disk but because it doesn't mount, os x do

  • Photoshop encounters an error and needs to close when I start it up.

    So a while ago I finally figured out my problem with the Photoshop installation and installed it with no errors. However, whenever I run Photoshop, it crashes. All of my graphics drivers are updated, I tried putting the tilde beside the "scriptingsom

  • Changing account assignment at invoice receipt (MIRO/MIR7)

    Hello gurus, I have got two questions concerning changing the account assignment of a PO item at invoice receipt. Example: We have a PO item with account assignment category K and non-valuated goods receipt. Now, after GR, we receive the invoice and

  • Data Sources - 0FI_FM_1 & 0FI_FM_2

    Hi Experts, I am trying to install the business content infoprovider 0FIFM_C01. The datasources are also getting installed in the BIW server during the activation of the business content. Even after replication with the source system, I am unable to