Install BPC 10 MS version OLAP server problem

Hi all,
I have a problem during installation of BPC 10 Microsoft version on VMWare.
Operating system: Windows Server 2008 Standard edition 64-bit SP1 including SQL Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (X64).
I installed all the pre-requsites according to installation guide from SAP.
Problem: BPC does not recognize OLAP server during installation.
OSoftSetupHelper.logu200E :
OLAP Server Version...
Required:10.0.1600.22 or higher
Currently:Not Installed
Status:Incorrect
I assume BPC does not recognize the higher version of Analysis server of SQL 2008 server R2 10.50.1617.0.
Could you give me some hints?
Thanks in advance.
Ed

Hi John,
thanks for your reply.
I was able to make a clean installation yesterday.
The reason why I got the error message from diagnostic report of administration manager "Olap Server and -service not found":
I forgot to loggon to Analysis Server in SQL Management Studio right after SQl installation.
Best regards
Ed

Similar Messages

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain.

Hi. I can install Adobe Flash Player plugin as i usualy did since 5 years. The problem is that firefox is always asking fo it if i i had never install it. I've tried to install firefox newer versions and the problem pesists. Thanks.

Hi. I can install Adobe Flash Player plugin as i usualy did since 5 years. The problem is that firefox is always asking fo it if i i had never install it. I've tried to install firefox newer versions and the problem pesists. Thanks.

Hi, glad that worked for you. Also thanks for the explanation as how you came about this. Yes, from my understanding any Install of the CS5, even a trial version Installs the 10.1 (beta/prerelease) versions. It is not clear to me or others why the 10.1 was used in the CS5 instead of the latest version (10.0.45.2). My only guess is that the 10.1 is very close to being released as a shipping version (final release) to the public. The 10.1 had a target date of the first half of 2010. Perhaps that was the reasoning. This is just my opinion:-)
As I said, many users are having this problem, not just with the CS5, but they Install the 10.1 thinking that will solve whatever problem they may be having with the latest version.
Your thread is very helpful for other users that may be having the exact problem that you were. For this reason if you marked your thread as answered, they would read it first.
Thanks,
eidnolb

Help with CS3 Adobe Version Cue Server problem.

Adobe Version Cue Server (CS3) doesn't display in the system prefs, niether will install a working copy off of Install disc after removed. There seems to be no way to fix this, In bridge it can't connect. All I get is a bunch of errors.

CS3 is known for the worst version ever of Bridge and also not supported any longer, you are using Bridge version 2 and current CC version is Bridge 6.
Also Version Cue has been discontinued per CS5
There is a blog post about a fix for a certain problem but not sure this is what you need (it is for a Mac), you can give it a try:
http://blogs.adobe.com/jnack/2008/03/a_tip_on_photoshop_mac_stability.html
Also keep in mind Bridge is not developed nor official supported for use over a network.
And in general, when something happens with Bridge first thing to try is resetting the preferences holding down option key (Mac) or ctrl (Win) while restarting Bridge.
But also I'm not sure you are in the right forum. Do a forum search about Version Cue using the Adobe Forums as source and see what result you get.

Question on installing BPC MS on 2008 server.

I am installing BPC 7.0(MS) on 2008 server..
when I hit startup.exe and fill the credentials..its starting the processes and stops at "CHECK SERVER ENVIRONMENTS" STEP.
do you any one idea where and what to check..?
Thanks,

Hi,
Its a single server installation and its on SAP BPC 7.0 on MS ,server : 2003 and sql : 2008
sorry for my typo.
I fixed it ..I did the server diagnostic and it gives me the error the sql backward copatabilit y is not installed.
I installed and I intalled the sap bpc 7.0 successfully.
Thanks,

TS5376 iTunes once again won't close. Past versions of iTunes had the most annoying behavior that when ever closed it would immediately reopen. Apple update just installed the latest version and the problem is back. Help.

Past versions of iTunes for Windows had the annoying behavior that it couldn't be closed. If I tried to exit or close the window iTunes would just open back up again. It had gone away, but apple just installed version 11.1.5.5 and it's back! The only way to exit is to open task manager and kill the process. Nothing else seems to work. Guess what Apple, I really don't want to have iTunes open all the time. I think the only answer is to stop using iTunes, since I don't have any Apple devices anyway, and go with a different music player on my PC.

Thanks.
Just in case, we'd better check on another old potential culprit (don't see it reported much lately, though) ... do you have any Logitech gaming software installed on the PC?
If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up

Installing 11g on Linux X11 server problem

Hi,
when I launche Runinstaller on Linux Xubuntu to install DB 11 g I have :
Checking swap space: must be greater than 150 MB. Actual 6165 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n] Y
Rechecking installer requirements....
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-09-26_04-15-32PM. Please wait ...oracle@us-xubuntu:/mnt/source/labtop/oradata/source_oracle_11g/database$ Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using '192.168.1.87' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.access$000(X11GraphicsEnvironment.java:53)
at sun.awt.X11GraphicsEnvironment$1.run(X11GraphicsEnvironment.java:142)
Many thanks for your help.

That's right, but if you are directly on the console, then :0.0 is enough. The xhots + command allows any client to use the display to launch its Xterm clients, such as OUI from oracle.
~ Madrid

Unlimted License Patch fails for multiple versions of Server Express

I'm following the directions for installing and licensing two versions of Microfocus Server Express for a PeopleTools 8.52 upgrade. When I get to the point where I apply the Unlimited License Patch (ULP), the application to the first version goes fine, showing a successful "installed" message. After installing the other version of Server Express, I try to apply the ULP again and this time it returns an "uninstalled" message. Eventhough I had COBDIR set to the 2nd installation, the ULP deinstalled the patch for the first installation. I'm doing this as the root user but I have su'ed to root. This worked fine 2 years ago. What am I missing in the environment that prohibits me from installing the ULP for multiple versions of Server Express?

LD_LIBRARY_PATH

Error to install the SAP NetWeaver Application Server ABAP 7.02 SP6 32-bit Trial Version

Hi,
Can anybody help me?
I'm try to install the SAP NetWeaver Application Server ABAP 7.02 SP6 32-bit Trial Version... and in the Running phase 11: Create sequence for the ABAP user, I had this error:
What do have I to do solve this problem?
ERROR      2014-07-13 14:24:19.395 [iaxxinscbk.cpp:244]
CJS-00030 Assertion failed:    :    [3336] 14:23:42    ***Warning: Loadavg: Could not add processor time performance counter to query.
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].
ERROR      2014-07-13 14:24:19.395
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: :    [3336] 14:23:42 ***Warning: Loadavg: Could not add processor time performance counter to query.
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].
ERROR      2014-07-13 14:24:19.495 [sixxcstepexecute.cpp:988]
FCO-00011 The step SdbCheckExistingSequence with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Sequence|ind|ind|ind|ind|6|0|SdbCheckExistingSequence was executed with status ERROR ( Last error reported by the step :Assertion failed:    :    [3336] 14:23:42    ***Warning: Loadavg: Could not add processor time performance counter to query.
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].).
INFO       2014-07-13 14:24:22.669 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Arquivos de programas\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
WARNING    2014-07-13 14:24:24.752 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR      2014-07-13 14:24:24.752 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .

Hi,
Kindly follow SCN thread Sapinst error: No GUI server connected and try to restart the complete system.
Regards,
Gaurav

Activation server problem after installing IOS5

I have a very specific problem:
Last year in July 2010 my brother died, I got from his legacy his Iphone which was sold by T-Mobile. I requested T mobile to unlock (SIM) as I had a subscription of of KPN. Untill then everything worked okey.
In September I made a switch to another provider Telfort, still then no problem my Iphone worked in order.
Today I installed a new version of Itunes 10.5.0.042, Itunes asked to install also new software on my IPHONE. I don’t know if he made a back up of my Iphone.
After doing so I had to configure my I phone. But now the Iphone gives me a message that my Iphone can’t be configured as the activation server is temporarily not available.
By Using Itunes is also no option as itunes tries to connect to the IPHONE and itunes is stating that there is no SIM Card in the Iphone, of course rubbish as there is for sure a SIM card in my phone.

I lost EVERYTHING...contacts, music, etc.....the music stayed in my itunes so I was able to re load it manually, but my contacts were also erased from the computer and the back ups too....iOS5 ****** me off

I installed visual studio 2010 in my windows 8.1 system.during the installation sql server 2008 r2 features were installed.so which version of sql server i need to install(2008 or 2008 r2)?

hi,
I installed visual studio 2010 in my windows 8.1 system.during the installation sql server 2008 r2 features were installed.so which version of sql server i need to install(2008 or 2008 r2)?
regards,
harsha.

My guess is SQL Server 2008 R2.
Check the following KB article for details:
http://support.microsoft.com/kb/2681562
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Installed BPC 7.0 for MS, but cannot connect to server in admin console

I have installed BPC 7.0, and in the server manager, everything is ok, and seems to be running and there are no errors. When I attempt to connect to the server with the Admin Console, I am getting the following error:
"The sstem cannot connect to the XXXXX Application server. Verify that you have Specified a valid Application server name, or see if the Application server is unavailable at this time"
any help would be appreciated.

Hi,
I would request you to try few things.
1. This is might be because there are other processes using port 1080.
   Log on to the application server via Remote Desktop.
   Open Task Manager and select the Processes tab.
   Select ManagementAgentNT.exe and choose End Process.
   Select RouterNT.exe and choose End Process.
   Log into IIS and START the Default Website.
2. Another possible cause can be if the Server and Client are running different versions of BPC. If the version of BPC is different on the server and the client then an uninstall will need to be done on the client
3. The APPINFO.XML file is corrupt. Delete the APPINFO.XML file located on the client machine in folder "My Documents\OutlookSoft" and login again using the connection wizard.
Hope one of the above resolves your issue.

Which JRE version to install on 64bit OS (win server 2008)

Hello everyone
I'm not sure what Java and JCO versions / releases to install on a Windows Server 2008 Standard 64bit Edition. We're installing Edge BI 3.1... apparently this is 32bit Software. I understand that we need to install JCO 2.1.9. Normally I prefer to install 64bit versions of a software on a 64bit OS.
In the JCO 2.1.9 installation preliminaries I read:
The SAP Java Connector (JCo) 2.1.9 requires a Java Runtime Environment (JRE) version 1.3 or 1.4. The 64-bit JCo versions need a 64-bit JRE version 1.4. Please see SAP note 549268 for a current and detailed list of supported platforms and Java runtime environments.
Unfortunately I can't find a 64bit JRE version 1.4... just a 32bit JRE 1.4.2_19 version. Furthermore this Java version is end of life. See http://www.oracle.com/technetwork/java/javase/download-138376.html.
So question is: what versions exactly for JCO 2.1.9 (32 or 64 bit) and JRE should I install?
Thanks for some clarification in advance to anyone!
Renaud
EDIT:
According to [this|Re: BOE SAP integration kit issue - Java connector] posting it seems that it is required to install the 32bit version of JCO 2.1.9

Actually, this problem is only partially solved. I still get "Can't connect to local MySQL server through socket '/var/mysql/mysql.sock..." when I type 'mysql'. I can access mysql by typing 'sudo mysql', but still get the socket error when connecting via php, so I think I still need to get to the point where I can type mysql without sudo.
Also, I went ahead and installed MySQL 5 with the tar package.
Message was edited by: rabbitdog

Problem with web BPC after installing BPC 7.0

Hi all!
We have installed BPC 7.0 for Microsoft. Diagnostics in Server Manager showed that everything is OK. But when we open BPC for Web an such error occurs:
Server Error in '/OSoft' Application.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30456: 'Security' is not a member of 'Microsoft'.
Thanks for help.

Hi Denis,
To fix this issue, you will need to install the Microsoft Anti-Cross Site Scripting Library, which provides protection to Web-based applications against Cross-Site Scripting (XSS) attacks.
You can download it at the following URL:
http://www.microsoft.com/downloads/details.aspx?familyid=efb9c819-53ff-4f82-bfafe11625130c25&
displaylang=en
After having installed it, you will need to copy AntiXssLibrary.dll to <BPC_folder>\Websvr\Web\bin on both the BPC Application server and the BPC Web server.
You can find more information about this process in the Installation Guide for SAP Business Planning and Consolidation 7.0, version for the Microsoft platform (p.24-25).
Best regards,
Julien

Version Cue Server 4.0.1 Update Problems

I've recently run into a problem with Version Cue Server 4.0.1. I've been using "Adobe Creative Suite CS4 Master Collection" without any problems until a couple of days ago when I ran the updates.
The updates locked up and failed on Version Cue, and after that, every time I right click on my desktop or in Windows Explorer, I get the error message:
"The specified module could not be found. C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\4.0.1\VersionCue.DLL"
Then everything crashes and reloads.
I called tech support and they said to reboot in a simplified mode, create a new administrator account, and reinstall version cue. Didn't work. I tried reinstalling both from the CD and from the downloaded update. Same problem. The installation goes most of the way and then fails.
I uninstalled Master Suite and was able to right-click again without problems, so I went back to a simplified boot and tried re-installing the software...which crashed my computer and caused the same right-click error message.
As I said earlier, everything worked fine right up until the point I ran the updates, so I know the software will run on my computer (Vista 32bit service pack 1).
Thoughts?

All,
I personally have been driving this issue at Adobe. As mentioned before, we've been hindered by the fact that we cannot yet reproduce the problem on a machine in our offices. But I've been doing all that I can to coordinate between customers and Senior Computer Scientists who are investigating this.
Here's the new information that has been learned by remotely debugging on customer's machines (great thanks to those who have made time for this!).
The problem is isolated to the binary patching function in our update components. This means updates that modify the files on your current system are impacted. Updates that simply replace the existing files with all new versions of the files, are not affected. While I don't have a complete list of which update uses which method, I can say that the recently released Photoshop CS4 and InDesign CS4 updates use a full file replacement method, so they should be no risk.
It was earlier believed that this problem only happened in the context of the Adobe_Updater.exe, which downloads the updates and runs them in with UI suppressed. This is now known not to be true, so "manual" running of the updates is not a valid workaround (sorry for those who spent time trying this).
There is some suspicions that the issue has to do with the temp folder being used by the updater. I've tested a private build with a change in this area on a couple customer machines, and got more elegant failures (didn't cause apps to stop working), but still no success
Lourens Van Der Jagt,
I found your observation about the "FAST IO DISALLOWED" messages to be very interesting, and forwarded that, along with results of my recent tests of the private build, to the devs.
One other thing that I found on the Vista machines I've looked at, which I'm curious about. On all machines I've looked at, the NTFS junction (looks like a shortcut) named "Program Data" in the root of the user folder is visible, while all other junctions are not. And, the junction can be browsed. All other Vista systems I've ever seen do not display this unless protected system files are asked to be displayed, and then they cannot be browsed.
I want you all to know that I have been working hard to represent you and get a resolution for this. I appreciate the hardship it presents to you, and I take it very seriously. Please keep the dialog going, and I'll try to keep updating here and in other threads as much as I can.
Sincerely,
Matt

Install BPC 10 MS version OLAP server problem

Similar Messages

Maybe you are looking for