"Install" button not working in updates

HI all. My iPhone 3G is still working terrifically on version 3.
However a couple of weeks ago I started to have problems with updates. When I chose one of the updates to install I go to it's page and click on, say, the blue "Free" button and it changes to a green "install" button. Normally clicking on that green "install" button initiates the password request and sets the install going.
But for the last couple of weeks clicking on the green "install" button just makes it switch back to the blue"Free" button ... and back and forth and back and forth.
No updates will install.
Back in the updates section I CAN use the install all button and it works. But some updates I don't want to install because they disable some functions.
Anyone else experience this ? Is there any fix ? I have tried hard resetting but no success.

This is also happening to me and I am glad to read that it's not just my phone. I have also tried rebooting the phone, and it doesn't work. It's a minor annoyance but I wish it could be fixed.

Similar Messages

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • Volume button not working after update ios..

    My iphone 4s volume down button not working after i upgrade to ios 6.0...and then i update to ios 6.0.1 its still not working...plz help...what happen...???

    Settings > Sounds > Change with Buttons... Make sure this is set to ON.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If none of the above resolves the issue, take the device to Apple for evaluation or possible replacement.

  • Keyboard Buttons Not Working With Update

    When I first installed iTunes, I noticed that the media shortcut keys on my Labtec Media Keyboard were not working. They worked perfectly fine for Windows Media, but my primary audio player is iTunes. Then when I installed the 7.1.1.5 update, I noticed that my keyboard buttons were working for the first time with iTunes. Now that I just updated to 7.2, I notice that the keyboard buttons do not work again.
    Any suggestions?

    Maybe some of the following ideas will help those wanting to control iTunes in the background (I don't).
    1. If you are running iTunes on a Mac (MacBook, MacBook Pro, Mac mini, or iMac) running Windows (via Boot Camp) then you can use the Apple Remote with iTunes (Boot Camp 1.2 drivers added support for the Remote). Therefore with initially iTunes in the background you can press the menu button on the Apple Remote to bring it to the front, and use the remote to control iTunes as normal. Furthermore, if you also have the Microsoft Media Center remote, you can still use the Media Center button to bring Media Center back to the front (pushing iTunes back in to the background) and then control Media Center.
    2. The KeySpan Express Remote is a USB infra-red controller with both Mac and Windows software. I have not tried this on a PC but on the Mac, the software has a special iTunes mode to let you control iTunes in the background. Even if you don't use this special mode, it can still be configured have the equivalent of the Apple menu button to bring iTunes to the front and then let you control iTunes. See http://www.keyspan.com/products/usb/urm17a/homepage.spml
    Most of the time, I actually don't use iTunes to play music, but to merely act as a server. I use a Roku SoundBridge M2000 to play music (I have three of them around the house), and this can be used with a Mac or PC. There are also other similar devices available like the Sonos ZonePlayer or the SlimDevices SqueezeBox (or even possibly the Apple TV or XBox 360).
    Note: If iTunes is already in the front then you can even use the Microsoft Media Center remote to control iTunes!!

  • Ipad home button not working after updating to iOS 4.3.3

    my ipad's home button was working fine until i updated the software to iOS 4.3.3. today. now it is completely unresponsive and it is rendering my ipad unusable.  is there any way to fix this problem?

          This link may help you. Ipad unresponsive or not sycning!

  • IPhone 5 buttons not working after update

    After updating to 7.0.2 yesterday, the home and power button of my iPhone 5 stopped working and they are no more responsive, anyone has an idea? No mean to restore it back to the default settings because iTunes asks me to deactivate the Find my iPhone which I can't access as the buttons are not working.

    Me too. All of the sudden I realized the right hand side of the power button stop responding, only the left side works. I may have to restore back to 7.0

  • 4s sleep/wake button not working after updates

    My 4s sleep/wake button just stopped working. I can't reset the phone by holding sleep/wake and home key.  Did the 6.1.2 update minutes ago which resets the phone and still not working!  Thoughts/suggestions? Anyone else having this problem????

    Ok, that is a relief. Thank you! 
    Out of curiousity, under what conditions would this still be true? What if they determine it was not a manufacturing defect (e.g., liquid damage, it fell, etc)?

  • My apps r all gone and install button not working

    after connecting to the itunes store, all my apps i had downloaded before all disappeared. My account is still there though..is there anyway to get it back?ohh and also the install button in the app purchasing place is not working.How can i fix it?Thanks

    This is also happening to me and I am glad to read that it's not just my phone. I have also tried rebooting the phone, and it doesn't work. It's a minor annoyance but I wish it could be fixed.

  • Contrast button not working after updating to Yosemite.

    I have Macbook Pro Mid 2012 version. I just updated to OS X Yosemite and I noticed that contrast button on keyboard is not doing anything. It shows an error like in this picture

          This link may help you. Ipad unresponsive or not sycning!

  • Reset button not working after update model

    <af:commandButton type="reset"/> works fine before update model (user submits form). But after that, it doesn't work. So how do I reset a form to previous state after model updated. For example, user wants to reset the form when there are validation errors.
    Thanks.

    Hi,
    reset only resets values entered before submit. If you need to undo entries after submit, you need to change this on the model. In ADF BC, you can access the Row and call a method to refresh it with DB forget, in which case the original values are added from the database
    Frank

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • Power button not working with 7.1 update

    Power button not working with 7.1 update

    I take it your phone was still under warranty then?!
    Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
    I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
    I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
    When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
    Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
    I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
    I seriously think Android is calling me...

  • TS3694 No sound and ringer button not working. I cannot play music but when I put my Iphone 4 on the dock it plays music. This happens when I updated my phone to IOS 6.1.3..The phone doesnt have any carriers we only used this just like Itouch. Please help

    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.

    Hi there,
    Thanks for reaching out to the community.
    Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
    It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
    Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
    Best of luck!

  • Music buttons not working in lock screen on my iPhone 4 after iOS7 update.

    After I updated my iPhone 4 to iOS7, the music buttons like PLAY, REWIND and FORWARD are not working in the locked screen as well as on swipe up menu. Any resolution please?

    hi there
    i had a problem with my wifes iphone 4s, today morning while travelling to work i changed a setting on repeat option and changed it to repeat artist, it was fine until when i finish my work and on my way back i found songs are not playing anymore, lots of stop signs next to my song list, play/pause button not working, album arkwork keep moving from one to another on its own, so after i reach home i try to do some research on Apple support communities, try to soft reset my phone closing all the apps on background didnt work, also note that control centre music player was not working as well. none of the solutions worked. after trying for two hours i found out that the trouble is in repeat options , so i changed it from repeat artist to repeat off. and the music start playing as usual, but i still have those stop buttons next to the songs i tried to play earlier. At least it fixed temporarily. please also note that in the meantime i tried to sync my phone with the pc and suddenly its start syncing all the songs again assuming there were no songs on my iphone.  so guys i think soft reset might not help all the time but try to remember what settings you changed recently and change it back to the original option, not sure ,but it might help.

  • HT4623 my phone main button not working after installed new version software 7.0.6

    my phone main button not working after installed new version software 7.0.6

    Arrange some liquid like petrol spirit and w 40
    two drops in to home button.
    30 times press slowly slowly and then restart your apply iphone.
    You will get ready.
    I am sure. Thanking you...

Maybe you are looking for

  • Adding styles to template (was: Urgent Help Needed)

    I have created pages from a template and trying to add css style in an editable region but for some reason it is not happening. In the css style panel i can only see the styles that were created on the template but cant see the new ones created for p

  • Program Logic & Java Graphics

    can anyone provide the source code how to create a ticket system. The system should have 2 category, adults and children with a pulldown menu for how many adults or children and calculate the total price of the ticket. example: Adult/$2.00 (the pulld

  • Is it possible to tweak OSX into accepting a normal microphone?

    Hi, as an avid gamer with a gaming PC besides my Macintosh, I've acquired a number of headsets over the time, such as a very decent Sennheiser. I can dual-boot my iMac into Windows and use that headset without any trouble. Booting back into OSX i'm l

  • I can't import media or view anymore!? Please help!

    I tried uploading media files like video to begin editing and it doesn't show up anywhere. The window that shows the playback and also the media file that suppose to had been imported doesn't show up. What am I doing wrong and how do I fix this? I re

  • VZAM/USB551L vs. LG Enlighten as Mobile Hotspot

    This has been bugging me for awhile now so I'm going to throw this out and see if anyone has or can found the answer.  I connect my Windows 8 HP Laptop to the internet using VZ Access Manager and the USB551L OR I can use  my LG Enlighten cell phone a