Install can't be opened. You should eject the disk image.
Trying to download Flash Pro_11_5. I purchased the full license. Gatekeeper is off. Help!
Tinyco please try downloading a fresh copy of the installation files at Download CS5.5 products. If you continue to face difficulties then I would recommend downloading the DMG on a different network or a USB drive.
Similar Messages
-
downloaded cs 5.5 design standard when i attempt to install i get an error "install"can't be opened. you should eject the disk image
I'm having the exact same problem. Downloaded using different browsers and gatekeeper is off. Help!
-
I get this every time i try to open the installer. I went to the tech support desk at my university and they spent an hour and a half going through these procedures with no result:
Disabled GateKeeper
Repaired permissions and verified startup disk
Fully updated OS 10.8.5
Downloaded same image multiple times-same issue
Cleared hard drive space from 4.5GB available to 26GB available
What can I do to successfully open the installer?Rsten where are you downloading Creative Suite 5 Design Premium from?
-
Attempting to install Flash player on a mac. System requirements are met; old versions uninstalled. I keep getting this error message "Install Adobe Flash Player" is damaged and can't be opened. You should eject the disk image.
Hi,
can you try installing from this zip file? http://download.macromedia.com/pub/flashplayer/installers/archive/fp_11.7.700.203_archive. zip -
Trying to reinstall Design Premium 5.5 on a Mac OSX 10.7.5 - once downloaded to my computer it will not install due to error message "Install" can't be opened. You should eject the disk image.
Thanksno, redownload using a different browser from prodesigntools.com
if you follow all 7 steps you can directly download a trial here: Download Adobe CS5.5 Trials: Direct Links (no Assistant / Manager) | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version. -
I am trying to reinstall the Creative Suite CS5.5 as I have lost my disk.
As soon as I try to open the installer I get the following message:
Creative Suite CS5.5 re-install error: Install can't be opened. You should eject the disk image.
I have deleted and redownloaded, downloaded from both safari and chrome and also downloaded it on different network connections.
I have also checked my privacy settings to 'Allow applications downloaded from: Anywhere'
Anyone have an answer to this problem?
I'm running on OS X 10.7.5
ThanksRight-click (CTRL-Click) that dmg
Choose Open from the context menu.
Click Open in the warning dialog that appears. -
"Adobe ColdFusion 10" can't be opened. You should eject the disk image.
Hello,
Dowloaded Coldfusion from the Adobe website, both with Safari as with Firefox
I want to install Coldfusion 10 on my Macbook. OS X 10.7.4 ( so not 10.8 ). When I double click the
.dmg file , I always get "“Adobe ColdFusion 10” can’t be opened. You should eject the disk image." error. Never had this before. I've read about setting security on 'non signed packages', but this applies to 10.8.
Is this a known issue ?
Thanks,
Dirk
[email protected]Hello Swaraj,
Thanks for the tip. What did work for me , is upgrading to OSX 10.7.5. I was inspired by this article. http://forums.adobe.com/message/4843052#4843052
Regards,
/Dirk -
After 3 different downloads (2 in Safari, 1 in Firefox) I still get this message when I try to open Lightroom package: “Adobe Photoshop Lightroom 4.pkg” is damaged and can’t be opened. You should eject the disk image. I have a feeling it has to do with 3rd-party software on my Mac OSX 10.8.2 - how do I get around that?
If you have already tried an alternate web browser then your next step would be to try an alternate Internet connection. Perhaps try a wired connection if you are using wireless for example.
-
Any ideas? I'm running Mac OS X 10.7.4...
Thank you!!Try downloading a clean copy of CS5.5 from this location instead:
Other downloads -
The disk image "Name Macbook Pro.sparsebundle" is in use Try ejecting the disk image
I upgraded my Mountain Lion two weeks ago and I've experienced number of issues since then.
Now I have problem with the Time Machine.
When I try to create backup I'm keep getting following message:
"The disk image "MyName Macbook Pro.sparsebundle" is in use
Try ejecting the disk image"
The problem is that Time Machine seem to be ejected, I checked this both in Finder and Disk Utility.
Please could you possibly help me with the issue?
I work on 2010 Macbook ProTry the following:
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in to the back of the Time Capsule
Wait a few minutes, then try another backup -
Replaced HD yesterday Was able to restore from Time Machine Now, it won't back up to Time Machine. I removed the TM and tried to add it- the error is "The disk image for "computername.sparsebundle" is in use. Try ejecting the disk image - How do I do?
Hello jfilbey,
Thanks for using Apple Support Communities.
Power cycle the disk Time Machine is backing up to.
For more information on this, take a look at:
Time Machine: Troubleshooting backup issues
http://support.apple.com/kb/HT3275?viewlocale=en_US&locale=en_US
Best of luck,
Mario -
anyone have any suggestions how to fix this. I have looked around but do not see this specific error message on any of the discussions. Also, very little information regarding mavericks
I am using Time Machine, but it an external drive that is connected to Airport Express with a USB through a hub
-
I just downloaded the 8.1 version. It was a 30+mb file. Previously I ran 4.0. So I drag the new Firefox icon into the Apps folder. It does its merge thing with the old version. Problem is when I click to open FF now, it always throws up this window asking me about the disk image of what I just downloaded. I even tried restarting the computer--but the same message pops up. I checked on your website and it says that I need to "eject" the disk image (i.e. I'm guessing that means the 30+ mb file I just down loaded), so since I don't have an eject option that I can find (except for external harddrives and cd/dvd), I just drug it into the trash. I go to empty the trash and I get a message that that dmg file is "in use" even though FF is completely shut down. So again I'm guessing that means that even though I already merged that dmg file with the old 4.0 version file, if I dump the update file it seems that it's going to mess up the actual revised program file still remaining. I just want to be able to click on the icon in my dock like I've always done and have FF open. I don't want to keep being asked about disk image stuff. Somehow this feels like an easy resolution, but I just can't seem to put my finger on how to resolve it. Thanks for you help.
Nope---didn't work. I've owned Macs for about 12 years so although I am brain dead on some things, I do have a working knowledge on most things. I only say that to say this--I did try holding down the mouse and choosing empty trash. It asks if I want to permanently delete what's in there. I say yes--and then I get the same identical message again-----'The operation can't be completed because the item "Firefox 8.0.1.dmg" is in use I can then click stop, or continue.' So apparently that complains the same way it does if I click it up on the menu :)))
As for item owned by---that's not an issue and isn't coming up. User is not a problem either as I am the only user on this system. There is only ONE file in my trash at the moment at that is this dmg file. Nothing Mac. Nothing owned by anyone other than Firefox. The problem seems to be that the dmg file and the original 4.0 FF file are working in tandem with each other--even though I have already drug the new 8.0 globe into the Apps folder and it updated the FF app with the new stuff. If I could force the dmg file to go away, I would do so, but at every turn the system is telling me it can't be done because it seems to think that dmg file is in use---even though everything is shut down and/or ejected. Hey--I'm getting ready to head out and won't be back till evening. I'll check back in this evening. Thank you again for your help. -
My Time Machine won't back up. I keep getting: "The disk image “Mike’s MacBook Pro.sparsebundle” is in use. Try ejecting the disk image."
I've Googled and tried different suggestions from forums, but nothing works. Most of the suggestions are too old anyway. It's doing my head in!
I have a mid-2012 MacBook Pro running Yosemite 10.10.2.
Thanks ~ MikeSee if Pondini can help http://pondini.org/TM/C12.html
-
Since 2/4 my backup won't complete. When I open my time capsule I get the message: "The disk image "Stephanie's IMAC Computer.sparsebundle" is in use. Try ejecting the disk image.
What does this mean and how do I eject the disk image?This is a very complicated and difficult "fix"
Step 1.....Pull the power cord from the back of the Time Capsule
Step 2.....Count to ten
Step 3.....Plug the power cord back in to the back of the Time Capsule
Wait a few minutes, and try a backup
Maybe you are looking for
-
Calculate A Fixed Length Future Date Based On User Provided Date
Does anyone know how I would (using date field) have a user choose a date (call it Field1) and have it calculate 30 days from whatever date is chosen in Field1) and auto populate it in another filed (call it Field2). Ideally user would not have to 'c
-
Shopping Cart error message in SRM 5.0
Hi All, When I attempt to create a text description cart, I get two error message below. Please can some recommend how these can be debugged/resolved or investigated further. I receive these messages the moment I click on 'Describe Requirement' and c
-
I keep updating Firefox yet system doesn't recognize it and keeps prompting me to do so again.
-
i have installed developer forms 10g release 2 on my pc. i logged in as a scott user. i have created a form and a block of emp table. when i am going to run the form it will give me TNS:12560 : application protocol error. and ask for username/passwor
-
Hi, is it possible to read metadata from an MS Access (2007) database ? I have a successfully tested location, but when trying to read tables in the metadata import wizard the hourglass cursor hangs on the tables node. It's possible to cancel and to