Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?

Hi,
I have been searching the web to find out the best way/place in which to load Captivate 4 on my Windows 7 64-bit machine. Seems some people have issues with recording, others don't. I have Windows XP mode on my machine.
My question is... what's the best way to load Captivate 4 on Windows 7 - should I install to Windows 7 and see how it goes. Or should I install under Windows XP mode?
Thank you!
Michele

Yea it works in XP mode
Daniel Wooden
Systems
U.S. District Court Middle District of Tennessee
615-736-7485
From:   RodWard <[email protected]>
To:     DEW45 <[email protected]>
Date:   09/24/2011 12:01 AM
Subject:        Install Captivate 4 on Windows 7 64-bit
machine with Windows XP mode?
Re: Install Captivate 4 on Windows 7 64-bit machine with Windows XP mode?
created by RodWard in Adobe Captivate - View the full discussion
Try running Cp4 in WinXp compatibility mode on Win7.  Also make sure
you're set to Run as Administrator.
I run Cp4 on Win7 without issues.  But other users report similar problems
to yourself.  In the end, it may or may not work for you because Adobe has
never claimed Cp4 was compatible with Vista or Win7 64bit.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3935593#3935593]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3935593#3935593]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Captivate by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

  • Trying to install a setup on a 64 bit machine with Windows server 2012 R2 which writes to registry FAILES

    My msi is a 32 bit setup.
    When I install it on a 32 bit machine with Windows XP it works fine .
    I tried to install it on a 64 bit machine with windows server 2008 and it succeeds
    While running my setup on a 64 bit machine with Windows server 2012 R2 it failes and I get the folloawing message:
    "Registry object reference not set to an instance of an object"
    Then the setup exits and leaves the app partially installed
    I tried searching for known problems over the net, but found nothing
    I will be happy to get some advice
    Thanks
    Liora

    Sounds like you are trying to update a registry object that is not there.
    Is this your own msi, or is it from a third party application?  If third party, check with them to see if they support it on 2012 or if they have a known workaround.
    If it is your own msi, sounds like it is time to debug it.
    .:|:.:|:. tim

  • Can We Install Hyperion EPM in 64 bit machine with windows8?

    Hi Gurus,
    Can We Install Hyperion EPM in 64 bit machine with windows8?

    There is 64 windows versions available in edelivery - "Oracle Enterprise Performance Management System (11.1.2.2.0) Media Pack for Microsoft Windows x64 (64-bit)"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to Install OBIEE and BIP on a machine with Windows XP ?

    Hi,
    I am very new to OBIEE and want to learn it by myself.
    Can I install OBIEE and BI Publisher on my home PC with Windows XP ? Can I install client and server on the same PC?
    If no, what are the other options ?
    Please help!!
    Thanks!
    Yogini

    Thanks for the link, but I am referring the same to install OBIEE.
    The pre-requisites section says :
    Client operating systems:
    - Microsoft Windows 2000 Professional with Service Pack 3 or later
    - Microsoft Windows 2003 Professional with Service Pack 1 or later (32-bit only)
    - Microsoft Windows XP Professional with Service Pack 1 or later
    Server operating systems:
    - For Oracle BI Server: Microsoft Windows 2000 Service Pack 4/2003 Server
    Thats why I wonder if I can install client and server on the same machine with Windows XP ?
    Please do let me know.
    Regards,
    Yogini

  • Can i install VS 2013 in my Virtual Machine with Windows 8.1 and work for Mobile Development,Mobile Emulator can work in my Virtual Machine ?

    I have a Virtual Machine with Windows 8.1 OS and 4gb RAM, 200gb Disk.
    I want to develop apps for Windows Mobile 8.1 with VS 2013 Update 4, Mobile Emulators can work in my Virtual Machine, bcz i am getting bellow error.
    Windows Phone Emulator is unable to verify that the virtual machine is running:
    Something happend while starting a virtual machine:'Emulator 8.1 WVGA 4 inch 512MB.APPUSER' failed to start.(Virtual machine ID xxxxxx-xxxxx-xxxx-xxxx-xxxxxxx)
    The Virtual Machine Management Service failed to start the virtual machine 'Emulator 8.1 WVGA 4inch 512MB.appuser' because one of the Hyper-V components is not running (Virtual machine ID xxxx-xxxxx-xxxx-xxxx-xxxx).

    No you cannot do that.  You need a physical machine that supports Hyper-V
    Jeff Sanders (MSFT)
    @jsandersrocks - Windows Store Developer Solutions
    @WSDevSol
    Getting Started With Windows Azure Mobile Services development?
    Click here
    Getting Started With Windows Phone or Store app development?
    Click here
    My Team Blog: Windows Store & Phone Developer Solutions
    My Blog: Http Client Protocol Issues (and other fun stuff I support)

  • I would like to be able to optimize my cc installation.  I am using a ssd card as my primary hard drive on a windows 8.1 machine with 32 gigs of memory.  I have additional spinner hard drives in this machine.  Everything is SATA 2 or 3.  How should I inst

    I would like to be able to optimize my cc installation.  I am using a 500 GB ssd card as my primary hard drive on a windows 8.1 machine with 32 gigs of memory.  I have additional spinner hard drives in this machine.  Everything is SATA 2 or 3.  How should I install the product to best utilize my hardware assets (Program Installation Drive; Scratch Drive; Temporary storage drive etc.).

    Barcode1 I would recommend you install the Adobe Creative applications included with your membership to your Primary hard drive which contains your operating system.  For questions on how to optimize specific settings such as scratch disks I would recommend posting in the relevant point product forum.  You can find a list of available forums at https://forums.adobe.com/welcome.

  • Password should not be displayed in Windows 64 bit machine

    Hi
    I am not sure whether this category is apt for my question.
    We have a requirement to mask the password entry in our utility in Windows 64 bit machine.
    I was trying to run the following from a 64 bit Windows machine .
    @echo off
    echo hP1X500P[PZBBBfh#b##fXf-V@`$fPf]f3/f1/5++u5>in.com
    echo Enter password:
    for /f "tokens=*" %%i in ('in.com') do set "password=%%i"
    del in.com
    echo.
    echo The Password is:"%password%"
    This is not working. It works with 32 bit Windows.
    Please let us know if you have any other alternative to work in windows 64 bit.
    thanks

    Thanks, I was pretty sure they should be there, but since I don't use them often, I was in doubt.
    I can't think of anything I did to remove the filter gallery - I'm really intrigued about how could it disappear (?). I supposed the 32 and 64 bit version of the 8bf file would be different, but wanted to give it a try just in case...
    After wasting some time trying to find the 64 bit "filter gallery.8bf" online, I've decided to just reinstall CS5 and yes, just as you say, now the filters are there. It's a good thing that reinstalling CS5 somehow keeps intact your preferences, workspace and 3rd party plugins! I just had to run the Adobe updater and everything's back to normal.
    Thanks for confirming this was an issue! Have a great day.

  • Weblogic password should not be displayed in windows 64 bit machine

    Hi
    We have a requirement to prompt for weblogic password in windows 64 bit machine.It should not be visible in the screen while entering the password.
    So was trying to run the following from a 64 bit Windows machine .
    @echo off
    echo hP1X500P[PZBBBfh#b##fXf-V@`$fPf]f3/f1/5++u5>in.com
    echo Enter password:
    for /f "tokens=*" %%i in ('in.com') do set "password=%%i"
    del in.com
    echo.
    echo The Password is:"%password%"
    This doesnt work in Windows 64 bit but works with Windows 32 bit machine.
    Does any of you in Weblogic team have implemented similar stuff for working in Windows 64 bit ?
    thanks in advance.

    Thanks, I was pretty sure they should be there, but since I don't use them often, I was in doubt.
    I can't think of anything I did to remove the filter gallery - I'm really intrigued about how could it disappear (?). I supposed the 32 and 64 bit version of the 8bf file would be different, but wanted to give it a try just in case...
    After wasting some time trying to find the 64 bit "filter gallery.8bf" online, I've decided to just reinstall CS5 and yes, just as you say, now the filters are there. It's a good thing that reinstalling CS5 somehow keeps intact your preferences, workspace and 3rd party plugins! I just had to run the Adobe updater and everything's back to normal.
    Thanks for confirming this was an issue! Have a great day.

  • I am trying to install my CS4 Suite onto new PC with Windows 8.  It installed Photoshop but nothing else.  It is asking me to "Install with 'setup.exe'"  Which i dont think is on there.  Is there a way around this?  Thanks in advance.

    I am trying to install my CS4 Suite onto new PC with Windows 8.  It installed Photoshop but nothing else.  It is asking me to "Install with 'setup.exe'"  Which i dont think is on there.  Is there a way around this?  Thanks in advance.

    Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
    Mylenium

  • I had an early version of photoshop (2.0 I think) that worked perfect on windows vista. I bought a new laptop with windows 8.1 and the photoshop won't install. Which version of Photoshop compatible with Windows 8.1 is closest to the older photoshop?

    I had an early version of Photoshop (2.0 I think) that worked perfect on windows vista. I bought a new laptop with windows 8.1 and the Photoshop won't install. Which version of Photoshop compatible with Windows 8.1 is closest to the older Photoshop?

    I think you mean Photoshop CS2.  Photoshop 2 is from around 1992.  The old Adobe activation servers were taken down. CS2 is about a decade old Adobe made a new download for old customers that legal customers can download and install. Download Acrobat 7 and CS2 products

  • Bit Locker Implementation in Windows 8.1 machine using Windows server 2008 r2 server group policy.

    is it possible to enable the bit locker only for windows 8.1 machines through windows 2008 r2 server group policy ?
    Thanx and Regards,
    Shanif

    Hi Shanif,
    Yes, we can do this.
    Regarding how to enable Bitlocker via group policy, the following article can be referred to as reference.
    Cannot Save Recovery Information for Bitlocker in Windows 7
    http://blogs.technet.com/b/askcore/archive/2010/02/16/cannot-save-recovery-information-for-bitlocker-in-windows-7.aspx
    After configuring the settings, we can use security filtering or WMI filtering to apply the policy to specific computers.
    Regarding this point, the following blog can be referred to for more information.
    Security Filtering, WMI Filtering, and Item-level Targeting in Group Policy Preferences
    http://blogs.technet.com/b/grouppolicy/archive/2009/07/30/security-filtering-wmi-filtering-and-item-level-targeting-in-group-policy-preferences.aspx
    Best regards,
    Frank Shen

  • Running  javafx on a 64 bit machine under Windows 7

    I want to run javafx on a 64 bit machine under Windows 7. I receive the following log when running simple "Hello World" program:
    init:
    deps-jar:
    compile:
    jar:
    standard-run:
    Error occurred during initialization of VM
    Unable to load native library: Can't load AMD 64-bit .dll on a IA 32-bit platform
    BUILD FAILED (total time: 0 seconds)
    Looking at sys requirements for javafx, I see that only 32 bit windows is supported. I did, though, succeed in doing a (64 Bit) build within netbeans after added a JAVA_HOME environment variable to point to my JDK directory (from Win 64 bit download).
    Please can anyone explain what I need to do so that (preferably) a javafx application runs 64 bit or if no choice how I can direct a 32 bit run without effecting most of the development tools that do support 64 bit?
    By the way, when running from command line:
    +"D:\Program Files\NetBeans 6.8\javafx2\javafx-sdk\bin\javafx.exe" -version+
    I receive same error as above:
    Error occurred during initialization of VM
    Unable to load native library: Can't load AMD 64-bit .dll on a IA 32-bit platform
    David Ziants

    I also tried adding to my system environment path variable: %JAVA_HOME%\bin;%JAVA_HOME%\jre\bin;and this did not help.
    My webstart properties are:
    $label=Web Start
    execution.target=jnlp
    javafx.profile=desktopbut I think the matter is more basic because I also receive the same error from the command line:
    "D:\Program Files\NetBeans 6.8\javafx2\javafx-sdk\bin\javafx.exe" -versionas I already mentioned.

  • Can I install Adobe Pro XI on a machine with Adobe Standard XI?

    Can I install Adobe Pro XI on a machine with Adobe Standard XI?@

    assuming you mean acrobat pro and standard, that may work, but it may not.
    more importantly, why would you leave acrobat standard on a computer that has acrobat pro?
    you should uninstall standard, clean (if you're using a win computer - Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then install pro

  • How can I install my Adobe Photoshop on my computer with Windows XP Service Pack 3?

    How can I install my Adobe Photoshop on my computer with Windows XP Service Pack 3?  Seriously frustrated.  I put the disc in the drive and nothing happens.  I open up add/remove programs and I get an error message stating it can't find a disc.  I chatted with Adobe support, and they decided to send me here. Probably because they knew I wanted to spend all day online trying to figure this out. 

    Download from Adobe's website, install then enter your serial number.
    Download and Installation Help

  • Create Hyper-V Virtual Machines with Windows PowerShell searching on hostname

    Dear,
    I’m a starter with PowerShell scripting an I’m looking for a script to create Hyper-V Virtual Machines with Windows PowerShell. The idea behind the script is that when I run the script its first searching for the hostname. I’m migrating 24 locations and each
    location have a different hostname like xxx-SRV001. The script needs to use the first 3 signs from the hostname in this case “xxx” and create 2 VM's with below info:
    Virtual Machine 1 2048MB
    Virtual Machine 2 4096MB
    Location D:\VM\
    I can create VM's with Powershell into Hyper-V so only a script to first searching for the first 3 characters of the hostname is enough.
    Example:
    It's the intention that when the script runs it's looking for the hostname. As example we have hostname 000-SRV001
    If the script see the first 3 characters of the hostname, in this case 000 he need to create 2 VMs with name xxx-SRV002 and xxx-SRV004
    I think it must be something with 
    $hostname = "Get-WmiObject -computername $Machine Win32_Computersystem"
    But then when i'm asking for $hostname he must give me back the hostname and if the hostname is 1 of the 24 locations then he need to create 2 vm's in Hyper-V with above info.
    Can you help me or do you have a script for this? 

    Juste use :
    $vram = 1GB*$vRam
    You not need the "
    Do you have any error with the creation of the VM?
    # Variables
    $VMName = Import-Csv "C:\HyperV\input.csv"
    $VHD = 40GB
    $VMLOC = "C:\HyperV"
    $vSwitch = "External"
    $ISO = "C:\ISO\WinServer2012R2.iso"
    $LocationCode = $env:COMPUTERNAME.Split("-")[0]
    # Create VM Folder
    MD $VMLOC -ErrorAction SilentlyContinue
    Foreach ($VM in $VMNames)
    $Name = $VM.name
    [int64]$vRam = $vm.vram
    $vram = 1GB*$vRam
    $VMName = $LocationCode+$Name
    # Create Virtual Machine
    New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VMLOC\$VMName\Virtual Harddisks\$VMName.vhdx" -NewVHDSizeBytes $VHD -SwitchName $vSwitch
    # Configure Virtual Machines
    Set-VMDvdDrive -VMName $VMName -Path $ISO
    Start-VM $VMName
    # Configure Virtual Machines
    Set-VMDvdDrive -VMName $VMName -Path $ISO
    Start-VM $VMName
    Error message 
    New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
    Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
    A parameter that is not valid was passed to the operation.
    At line:20 char:5
    + New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
    Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
    At line:23 char:5
    + Set-VMDvdDrive -VMName $VMName -Path $ISO
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
    Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
    At line:24 char:5
    + Start-VM $VMName
    + ~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
    Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
    At line:27 char:5
    + Set-VMDvdDrive -VMName $VMName -Path $ISO
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
    Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
    At line:28 char:5
    + Start-VM $VMName
    + ~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
    New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
    Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
    A parameter that is not valid was passed to the operation.
    At line:20 char:5
    + New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
    Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
    At line:23 char:5
    + Set-VMDvdDrive -VMName $VMName -Path $ISO
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
    Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
    At line:24 char:5
    + Start-VM $VMName
    + ~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
    Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
    At line:27 char:5
    + Set-VMDvdDrive -VMName $VMName -Path $ISO
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
    Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
    At line:28 char:5
    + Start-VM $VMName
    + ~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand

Maybe you are looking for