Install Car MD disc on my imac

I bought Car MD but I can't install it in my imac because the system requirement is for windows 2000,XP,Vista. How can i transfer this disc into my imac!
Any help would be greatly appreciated..rjburke

Thanks.....could I open the disc on a windows computer,then use a jump drive to transfer the data to my imac????

Similar Messages

Can't install CS3 from discs on my iMac

With the "application" disc in the computer, it will start running the install. Then it stops, spits out the CD and asks for the Adobe ExtendScript Toolkit 2 disc. Where is that? Be nice if the discs were labeled plainly!
I went online, found that application, downloaded it, burned a disc and tried installing again.
Once again, it stops and asks for the Toolkit, but when I put in my burned disc it tells me that I can't install two things at the same time.
I'm going quite nuts. I need to be able to run the programs that I PAID FOR but CAN'T INSTALL. Help me please!!!!

don't burn a disk. just install from the installation files like they were designed to be used.
Downloads available:
Suite: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Download and installation help for Adobe links: https://helpx.adobe.com/download-install.html
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How can I install Photoshop CS5 on a new iMac with no disc drive

How can I install Photoshop CS5 on a new iMac with no disc drive?

Hi,
Please copy this Link http://trials2.adobe.com/AdobeProducts/PHSP/12/osx10/Photoshop_12_LS1.dmg?PID=2159997
Now open Adobe.com and go to Products Trials. Click on Acrobat Try now and once the download page appears then paste the above mentioned link in the address bar and then press Enter. Download should start immediately.
Please let me know if it helps.
regards,
Abhijit

Hi - I recently purchased a new iMac. I have a registered cs5 design premium package which is an upgrade - I have no disc for cs4 but have the qualifying serial number for it. I have installed cs5 via download onto my iMac but it is not accepting the ser

Hi - I recently purchased a new iMac. I have a registered cs5 design premium package which is an upgrade - I have no disc for cs4 but have the qualifying serial number for it. I have installed cs5 via download onto my iMac but it is not accepting the serial number. Can anybody help. Does anybody else think that Adobe will loose a lot of customers by not providing any chat or call support for cs5 users??

You can support serial number and activation support.
Mylenium

I've forgotten my administrator password and have lost the original install disc for my macbook but I do have the install disc for my imac; can I use the imac install disc to reset the administrator password?

I've forgotten my administrator password for my macbook pro and don't have the original OS X disc; I do have the OS X disc for my iMac. Can I use this to reset the password?

You have nothing to loose by trying it.
I doubt it will boot but try it anyhow.
You will need to contact Apple for replacement install disks.
Contacting Apple for support and service

I recently installed 10.6.8 on my Imac and now i find i have 2 startup discs which i don't want. How do i erase the old startup disc which uses 10.5.8?

I recently installed 10.6.8 on my Imac and now i find i have 2 startup discs which i don't want. How do i erase the old startup disc which uses 10.5.8?
My Imac info is :
It also appears that many of my files are duplicated.
Work files and system files such as Library (i have 3 Libraries now..?)
Also keep geting messages such as "scratch disks full".
Any advice is welcome..

Well I would recommend you do have an off internal hard drive backup of all your files before wiping any duplicates off the internal. Once you are certain you have an off internal hard drive backup of all essential files, then use Disk Utility to erase the other partitions.

How do I install Premiere Elements 9 on my iMac?

I cannot install Premiere Elements 9 on my new iMac from the DVDs I own and successfully used to install Premiere Elements 9 on my old PC with Windows 7. The DVD auto-ejects and I get 5 warnings ("WARNING; Payload cannot be installed due to dependent operation failure") and 16 error messages of various cryptic content.
I successfully installed Photoshop Elements 9 from the second DVD. Note that the installation process for Premiere Elements 9 did not request a serial number.

Bob
Disc 2 Mac. This is Premiere Elements 9 Mac Content and does not require or ask for a serial number. As I have said, you do not install the Premiere Elements 9 Mac Content until after you have installed Premiere Elements 9 Mac program from Disc 1 Mac. If you have not installed the Premiere Elements 9 Mac program, you do not install Premiere Elements 9 Mac Content yet.
Both Photoshop Elements 9 Mac and Premiere Elements 9 Mac programs are installed from Disc 1 Mac, one at a time and each have its own unique serial number. These serial numbers are found as stickers on the back of the plastic case that house the 4 disc set.
There is no Photoshop Elements 9 Mac Content disc. Its content comes within the installation of the program. I have never run into the situation where Content disc asked for a serial number.
Just a point of clarification on what I wrote in post 1...I have cited Disc 1, 2, 3, and 4. In reality, the discs read as follows
Disc 1 Mac. For Photoshop Elements 9 and Premiere Elements 9 programs on Mac.
Disc 2 Mac For Premiere Elements 9 Content Mac...to be used only after the program is installed from Disc 1.
Disc 1 Windows. For Photoshop Elements 9 and Premiere Elements 9 programs on Windows.
Disc 2 Windows. For Premiere Elements 9 Content Windows...to be used only after the program is installed from Disc 1.
Bottom Line:
You need a unique serial number for each of Premiere Elements 9 and Photoshop Elements 9. Do you have them?
But, remember...
Photoshop Elements 9 Mac and Photoshop Elements 9 Windows have the same serial number
and
Premiere Elements 9 Mac and Premiere Elements 9 Windows have the same serial number which is different for that used by Photoshop Elements.
Do you have these serial numbers? If so, use Disc 1 Mac to try to install Premiere Elements 9 on your iMac with your purchased Premiere Elements 9 serial number. I cannot assure the compatibility of Premiere Elements 9 Mac with your iMac but those considerations go beyond an installation considerations.
Please review and consider. I hope that you are OK with the details.
ATR

Installing iWork (from disc) to new Mini

I'm trying to install iWork '06 from disc on to my new Mac Mini. I'm using my old iMac as a shared DVD drive, and the Mini can see it, and can see the iWork disc, but when I click on the disc, I get and error that says, "The operation can’t be completed because the original item for “iWork ’06” can’t be found."
What's the workaround here? I installed Logic from discs in this way, so I know the process works. How do I the iWorks to install?
(If Apple would simply let us transfer our retail licenses to the App store, life would be easy. But no...)

ph47 wrote:
iWork '06 will update fine straightaway to '09 once it is installed. I just need to get it installed. Anybody have any useful information or tips?
Time has value. You will likely expend $60 of your personal time trying to arm wrestle with iWork '06, when you could have invested that sum in newly purchased Pages, Numbers, and Keynote from the App Store. And, for a fraction of the time investment.

What happens if i need to reinstall Lion from a disc after my iMac ***** itself?

What happens if i need to reinstall Lion from a disc after my iMac sh**'s itself?

It depends on how bad your iMac sh**'s itself. If you can boot into the Recovery partition, then there is re-install option which will automatically download Lion from the store and install it. If you can't boot into recovery then you would have needed to create a bootable Lion dvd or thumb drive to do an install. In this case you would need to create the bootable image after downloading the Lion installer and before performing the install as the installer gets deleted upon successful upgrade to Lion.

Can't install OS9 (so as to download iMac Firmware update). . .

this is crazy. i bought my dad Tiger, to instal on his G3 Mac. So I did the media exchange and got all the discs. but couldn't instal Tiger because I needed to update firmware. which i downloaded. but couldn't install firmware because i only had OSX on his iMac. I have the Mac OS 9 install disc, but it won't install. so i'm stuck. it would cost me 45 dollars to get the mac people to help (they would if we were just talking about Tiger). As the wicked witch said, "what a world, what a world..." can anyone tell me how to install the OS 9? I held down the C key, but there was no destination disc showing.
iMac G3 Mac OS X (10.1.x) need to install OS 9

Hi, Peter, and welcome to Apple Discussions. Most likely the reason there's no destination disk showing is that when you installed OS X previously, you didn't select the option to install OS 9 driver on it. Therefore, even if the disk is working perfectly, OS 9 can't "see" it, and the installer can't install anything on it.
I've never been an iMac user, but it's my understanding that many people who've installed OS X on G3 iMacs before updating their firmware have gotten into a world of trouble that way, some of them ending up with completely nonfunctioning iMacs. You (and Dad) may have been very lucky so far. That may apply only to higher versions of OS X, though; I'm not well enough informed to be certain.
To push your luck any farther, you may need to boot to your installer disk for the already-installed version of OS X (10.1.x, according to your system info below), and erase the drive again using the Disk Utility for that version — NOT the Tiger version of DU — and this time make sure the OS 9 driver option is selected before hitting the Erase button. I don't know of any other way you can get that driver installed. If you don't land in hot water just trying to do that much, you should then be able to install OS 9 and update the iMac's firmware. After that, you'll be free to install Tiger.

What Are The Correct Gray OS X Discs For This Imac?

I got a free 700Mhz G4, 15" Screen, 512mb Ram, 40GB HDD and I was wondering what are the correct OS X discs (Gray) that came with this Mac?
There has to be a serial or model number right? I have Leopard installed on it and I missing having the DVD player so could I connect the iMac to my PowerMac G5 using Target Disc Mode, and then install Panther or Tiger onto the iMac through it?

Liquidus wrote:
I got a free 700Mhz G4, 15" Screen, 512mb Ram, 40GB HDD and I was wondering what are the correct OS X discs (Gray) that came with this Mac?
The correct Mac OS restore discs are Mac OS X 10.1.2 and Mac OS 9.2.2. I have restore discs for a 600MHz Late 2001 iMac G3, which has the same identical software as the iMac G4. That part number for the disc set is 603-0372.
For the second part of your question, you can install Panther or Tiger through Target Disc Mode from your PM G5.
-Brian

Unable to Install Leopard in my late 2006 Imac.

Hi, Please help me in installing Leopard on my late 2006 Imac. After starting the installing dvd my system is not displaying Macintosh HD in start up disk and after reading in Mac forum. I have partition my HD in GUID partition format but still its not showing HD in start up disk.
Mac forum says that i can install leopard even if i have 667 Mhz speed with the help of Leopard assist software. but when i am installing its saying YOUR SYSTEM IS INTEL BASED. IT DOES NOT REQUIRE LEOPARD ASSIST.
Please help

Information courtesy of TexasMacMan;
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
if your disc is not a black one with a big X on it, and one of the above serial nos. it won't work.
No grey disc or any with "upgrade" or "drop in" on the label will work.

I'm attempting to install snow leopard on my 2008 Imac and it stops installing less than 1/4 way through?

I'm attempting to install Snow Leopard on my 2008 Imac and before it 1/4 way done installing, it ejects the disc and restarts the computer. Is there something I am doing wrong?

See:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

Why is Facetime installed on my 3 month old iMac for free?

I'm trying to answer this:
Why is factime installed on my 3 month-old iMac SnowLeopard for free? Was it the update to 10.6.7 (on a system with the new "facetime HD camera" - not an iSight - that did it?
I have an older iMac where it isn't installed on - and am trying to figure out why? Both are Snow Leopard. Why do I have to pay $0.99 when it came for free on a Snow Leopard system?

I would say it is related to the purchase date. FaceTime is included in 10.6.6~8 OEM discs.

Stuck between two discs. G5 iMac

Several apps were not running smoothly. I ran disc utility and the hard disc was eventually ok (including SMART) but things still were not right (apps not quitting, menus not working etc). I backed up, thankfully, and tried archive and install using the OSX discs that came with the computer . The first disc ran ok but the second will not run, it is not visibly damaged. The computer will not boot up except to ask for the second disc. I am tempted to try a clean install but would welcome any suggestions.
iMac G5, MacBook Mac OS X (10.4.7)

It looks like a fresh install is your only choice if you can't get past that request for a second disk. Have you tried booting in Safe Mode to see if you can get in that way?
If you have to reinstall, zero out the hard drive first, then install OS X. Then run Repair Disk and Repair Permissions, in that order and reboot normally. Now, download the 10.4.7 Combo Updater(s) for PowerPC and Intel and install those in their respective machines. Then run Repair Disk and Repair Permissions again, before installing any more updates. Test your installation first to be sure all applications are working as they should before you install anything else.
Hope this helps,
Mulder
If this answered you question, please consider awarding some points. Why Reward Points?
iMac G4 700Mhz Mac OS X (10.3.9)

Install Car MD disc on my imac

Similar Messages

Maybe you are looking for