Install CC&B V2.2 on OAS - OC4J won't start after configuring for CC&B

I'm trying to setup an OC4J instance according to the CC&B install guide. After following the steps, the OC4J instance won't start. Any ideas?

HI,
i haVe the same issue, when I modify the next value -Xbootclasspath/a:<$SPLEBASE>/splapp/standalone/lib/xalan-2.7.0.jar:<$SPLEBASE>/splapp/standalone/lib/serializer-2.7.0.jar. The instance delay a log time and after several minutes doesn't start-
Anybody has any idea?
Thanks

Similar Messages

Mac Mini won't start after installing OS X 10.6.3

My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3.

Safari won't start, after installing X Lion

Safari won't start, after installing X Lion

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

OracleServiceXE Won't Start After Active Directory Install

Hello Folks,
Newbie to Oracle but proficient in general I.T. stuff. Client contacted us stating Active Directory role installed on Server 2008 box running as a virtual machine. After which client could no longer remotely access server and subsequently removed Active Directory. Since then, OracleServiceXE will not start and no response on the homepage of Oracle at http://127.0.0.1:8080/apex/f?p=4950.
I see many other posts here of troubleshooting that led to reinstall of software. We're OK with that. However, I would like to verify that the customer's database will be able to be reattached after the reinstall? If so, what is that process please?
We're open to troubleshooting as well if there's a relatively easy fix but otherwise open to reinstall.
We're open to paid support if necessary as client has been down for a few days now.
Please help!
Thanks,
Jon

clcarter,
Thank you. I copied the entire database directory to the desktop. Should be good to go there.
Now, how would one shut down the database, go to a startup mount and alter the database open reset logs?
Alert log (beginning and end) follows:
Thu Aug 16 16:01:10 2012
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production.
Using parameter settings in client-side pfile C:\ORACLEXE\APP\ORACLE\PRODUCT\11.2.0\SERVER\CONFIG\SCRIPTS\INIT.ORA on machine DISMART
System parameters with non-default values:
sessions = 172
memory_target = 1G
control_files = "C:\ORACLEXE\APP\ORACLE\ORADATA\XE\CONTROL.DBF"
compatible = "11.2.0.0.0"
db_recovery_file_dest = "C:\oraclexe\app\oracle\fast_recovery_area"
db_recovery_file_dest_size= 10G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers = 4
job_queue_processes = 4
audit_file_dest = "C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP"
db_name = "XE"
open_cursors = 300
diagnostic_dest = "C:\ORACLEXE\APP\ORACLE"
Thu Aug 16 16:01:22 2012
PMON started with pid=2, OS id=2412
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified !
Thu Aug 16 16:01:22 2012
PSP0 started with pid=3, OS id=3060
Thu Aug 16 16:01:22 2012
VKTM started with pid=4, OS id=1128 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Thu Aug 16 16:01:22 2012
GEN0 started with pid=5, OS id=5772
Thu Aug 16 16:01:22 2012
DIAG started with pid=6, OS id=5972
Thu Aug 16 16:01:22 2012
DBRM started with pid=7, OS id=5832
Thu Aug 16 16:01:22 2012
DIA0 started with pid=8, OS id=5812
Thu Aug 16 16:01:22 2012
MMAN started with pid=9, OS id=5200
Thu Aug 16 16:01:22 2012
DBW0 started with pid=10, OS id=2036
Thu Aug 16 16:01:22 2012
LGWR started with pid=11, OS id=4284
Thu Aug 16 16:01:22 2012
CKPT started with pid=12, OS id=5168
Thu Aug 16 16:01:22 2012
SMON started with pid=13, OS id=6020
Thu Aug 16 16:01:22 2012
RECO started with pid=14, OS id=5940
Thu Aug 16 16:01:22 2012
MMON started with pid=15, OS id=480
Thu Aug 16 16:01:22 2012
MMNL started with pid=16, OS id=5320
Thu Aug 16 16:01:22 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
ORACLE_BASE from environment = C:\oraclexe\app\oracle
Thu Aug 16 16:01:22 2012
kcbztek_populate_tbskey: db key in controlfile and datafile 1 is inconsistent..
Full restore complete of datafile 3 to datafile copy C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSAUX.DBF. Elapsed time: 0:00:02
checkpoint is 354593
Full restore complete of datafile 4 to datafile copy C:\ORACLEXE\APP\ORACLE\ORADATA\XE\USERS.DBF. Elapsed time: 0:00:09
checkpoint is 354593
Thu Aug 16 16:01:53 2012
Full restore complete of datafile 1 to datafile copy C:\ORACLEXE\APP\ORACLE\ORADATA\XE\SYSTEM.DBF. Elapsed time: 0:00:31
checkpoint is 354593
Thu Aug 16 16:02:09 2012
Full restore complete of datafile 2 to datafile copy C:\ORACLEXE\APP\ORACLE\ORADATA\XE\UNDOTBS1.DBF. Elapsed time: 0:00:47
checkpoint is 354593
Thu Aug 16 16:02:09 2012
Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Thu Aug 16 16:02:10 2012
Successful mount of redo thread 1, with mount id 2672646209
Completed: Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS
Shutting down instance (immediate)
Shutting down instance: further logons disabled
Stopping background process MMNL
Stopping background process MMON
License high water mark = 1
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Thu Aug 16 16:02:14 2012
Stopping background process VKTM
Thu Aug 16 16:02:16 2012
Instance shutdown complete
Thu Aug 16 16:02:18 2012
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production.
Using parameter settings in client-side pfile C:\ORACLEXE\APP\ORACLE\PRODUCT\11.2.0\SERVER\CONFIG\SCRIPTS\INITXETEMP.ORA on machine DISMART
System parameters with non-default values:
sessions = 172
memory_target = 1G
control_files = "C:\ORACLEXE\APP\ORACLE\ORADATA\XE\CONTROL.DBF"
compatible = "11.2.0.0.0"
db_recovery_file_dest = "C:\oraclexe\app\oracle\fast_recovery_area"
db_recovery_file_dest_size= 10G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers = 4
audit_file_dest = "C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP"
db_name = "XE"
open_cursors = 300
diagnostic_dest = "C:\ORACLEXE\APP\ORACLE"
Thu Aug 16 16:02:26 2012
PMON started with pid=2, OS id=5128
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified !
Thu Aug 16 16:02:26 2012
PSP0 started with pid=3, OS id=5388
Thu Aug 16 16:02:26 2012
VKTM started with pid=4, OS id=4004 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Thu Aug 16 16:02:26 2012
GEN0 started with pid=5, OS id=4976
Thu Aug 16 16:02:26 2012
DIAG started with pid=6, OS id=5860
Thu Aug 16 16:02:26 2012
DBRM started with pid=7, OS id=5532
Thu Aug 16 16:02:26 2012
DIA0 started with pid=8, OS id=2820
Thu Aug 16 16:02:26 2012
MMAN started with pid=9, OS id=5088
Thu Aug 16 16:02:26 2012
DBW0 started with pid=10, OS id=4236
Thu Aug 16 16:02:26 2012
LGWR started with pid=11, OS id=4240
Thu Aug 16 16:02:26 2012
CKPT started with pid=12, OS id=4244
Thu Aug 16 16:02:26 2012
SMON started with pid=13, OS id=5432
Thu Aug 16 16:02:26 2012
RECO started with pid=14, OS id=5076
Thu Aug 16 16:02:26 2012
MMON started with pid=15, OS id=5124
Thu Aug 16 16:02:26 2012
MMNL started with pid=16, OS id=5924
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
ORACLE_BASE from environment = C:\oraclexe\app\oracle
Thu Aug 16 16:02:26 2012
Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Successful mount of redo thread 1, with mount id 2672635474
Completed: Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS
Stopping background process MMNL
Stopping background process MMON
Starting background process MMON
Thu Aug 16 16:02:29 2012
MMON started with pid=15, OS id=5732
Starting background process MMNL
Thu Aug 16 16:02:29 2012
MMNL started with pid=16, OS id=5704
ALTER SYSTEM enable restricted session;
alter database "XE" open resetlogs
RESETLOGS after incomplete recovery UNTIL CHANGE 354593
Errors in file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_5312.trc:
ORA-00313: open failed for members of log group 1 of thread 1
Clearing online redo logfile 1 C:\ORACLEXE\APP\ORACLE\FAST_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_%U_.LOG
Clearing online log 1 of thread 1 sequence number 0
Errors in file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_5312.trc:
ORA-00313: open failed for members of log group 1 of thread 1
Errors in file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_5312.trc:
ORA-00313: open failed for members of log group 1 of thread 1
Clearing online redo logfile 1 complete
Thu Aug 16 16:02:32 2012
Checker run found 1 new persistent data failures
Errors in file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_5312.trc:
ORA-00313: open failed for members of log group 2 of thread 1
Clearing online redo logfile 2 C:\ORACLEXE\APP\ORACLE\FAST_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_%U_.LOG
Clearing online log 2 of thread 1 sequence number 0
Errors in file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_5312.trc:
ORA-00313: open failed for members of log group 2 of thread 1
Errors in file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_5312.trc:
ORA-00313: open failed for members of log group 2 of thread 1
Thu Aug 16 16:02:32 2012
Errors in file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_m000_1808.trc:
ORA-01155: the database is being opened, closed, mounted or dismounted
Clearing online redo logfile 2 complete
Errors in file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_5312.trc:
ORA-00313: open failed for members of log group 3 of thread 1
Clearing online redo logfile 3 C:\ORACLEXE\APP\ORACLE\FAST_RECOVERY_AREA\XE\ONLINELOG\O1_MF_0_%U_.LOG
Clearing online log 3 of thread 1 sequence number 0
Errors in file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_5312.trc:
ORA-00313: open failed for members of log group 3 of thread 1
Errors in file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_5312.trc:
ORA-00313: open failed for members of log group 3 of thread 1
Clearing online redo logfile 3 complete
Online log C:\ORACLEXE\APP\ORACLE\FAST_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_82TNGPV9_.LOG: Thread 1 Group 1 was previously cleared
Online log C:\ORACLEXE\APP\ORACLE\FAST_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_82TNGRDB_.LOG: Thread 1 Group 2 was previously cleared
Online log C:\ORACLEXE\APP\ORACLE\FAST_RECOVERY_AREA\XE\ONLINELOG\O1_MF_3_82TNGSP9_.LOG: Thread 1 Group 3 was previously cleared
Setting recovery target incarnation to 2
Thu Aug 16 16:02:37 2012
Assigning activation ID 2672635474 (0x9f4d2e52)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: C:\ORACLEXE\APP\ORACLE\FAST_RECOVERY_AREA\XE\ONLINELOG\O1_MF_1_82TNGPV9_.LOG
Successful open of redo thread 1
Thu Aug 16 16:02:37 2012
SMON: enabling cache recovery
Thu Aug 16 16:02:41 2012
[5312] Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:2306864 end:2307738 diff:874 (8 seconds)
Dictionary check beginning
Tablespace 'TEMP' #3 found in data dictionary,
but not in the controlfile. Adding to controlfile.
Dictionary check complete
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
WARNING: The following temporary tablespaces contain no files.
This condition can occur when a backup controlfile has
been restored. It may be necessary to add files to these
tablespaces. That can be done using the SQL statement:
ALTER TABLESPACE <tablespace_name> ADD TEMPFILE
Alternatively, if these temporary tablespaces are no longer
needed, then they can be dropped.
Empty temporary tablespace: TEMP
Updating character set in controlfile to AL32UTF8
Create Relation IPS_PACKAGE_UNPACK_HISTORY
Opening with Resource Manager plan: INTERNAL_PLAN_XE
Thu Aug 16 16:02:44 2012
Starting background process VKRM
Thu Aug 16 16:02:44 2012
VKRM started with pid=23, OS id=2684
WARNING: Files may exists in db_recovery_file_dest
that are not known to the database. Use the RMAN command
CATALOG RECOVERY AREA to re-catalog any such files.
If files cannot be cataloged, then manually delete them
using OS command.
One of the following events caused this:
1. A backup controlfile was restored.
2. A standby controlfile was restored.
3. The controlfile was re-created.
4. db_recovery_file_dest had previously been enabled and
then disabled.
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Thu Aug 16 16:02:47 2012
QMNC started with pid=24, OS id=3676
LOGSTDBY: Validating controlfile with logical metadata
LOGSTDBY: Validation complete
Global Name changed to XE
Thu Aug 16 16:02:51 2012
Starting background process CJQ0
Thu Aug 16 16:02:51 2012
CJQ0 started with pid=25, OS id=2536
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified !
Thu Aug 16 16:02:57 2012
Completed: alter database "XE" open resetlogs
alter database rename global_name to "XE"
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
Completed: alter database rename global_name to "XE"
Thu Aug 16 16:02:57 2012
Thread 1 advanced to log sequence 2 (LGWR switch)
Current log# 2 seq# 2 mem# 0: C:\ORACLEXE\APP\ORACLE\FAST_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_82TNGRDB_.LOG
alter database drop logfile group 3
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
Deleted Oracle managed file C:\ORACLEXE\APP\ORACLE\FAST_RECOVERY_AREA\XE\ONLINELOG\O1_MF_3_82TNGSP9_.LOG
Completed: alter database drop logfile group 3
ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oraclexe\app\oracle\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
Completed: ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oraclexe\app\oracle\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
ALTER SYSTEM disable restricted session;
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
Thu Aug 16 16:03:02 2012
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
Thu Aug 16 16:03:02 2012
Errors in file C:\ORACLEXE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_j003_5264.trc:
ORA-12012: error on auto execute of job "SYS"."BSLN_MAINTAIN_STATS_JOB"
ORA-06550: line 1, column 807:
PLS-00201: identifier 'DBSNMP.BSLN_INTERNAL' must be declared
ORA-06550: line 1, column 807:
PL/SQL: Statement ignored
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
Thu Aug 16 16:03:11 2012
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Thu Aug 16 16:03:14 2012
XDB installed.
Thu Aug 16 16:03:15 2012
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
XDB initialized.
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
Thu Aug 16 16:03:25 2012
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
Thu Aug 16 16:03:28 2012
Shutting down instance (immediate)
Shutting down instance: further logons disabled
Stopping background process QMNC
Stopping background process CJQ0
Stopping background process MMNL
Stopping background process MMON
License high water mark = 6
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Thu Aug 16 16:03:31 2012
SMON: disabling tx recovery
SMON: disabling cache recovery
Thu Aug 16 16:03:31 2012
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 2
Successful close of redo thread 1
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Thu Aug 16 16:03:32 2012
Stopping background process VKTM
Thu Aug 16 16:03:35 2012
Instance shutdown complete
Thu Aug 16 16:03:37 2012
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production.
Using parameter settings in server-side pfile C:\ORACLEXE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DATABASE\INITXE.ORA
System parameters with non-default values:
sessions = 172
spfile = "C:\ORACLEXE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DBS\SPFILEXE.ORA"
memory_target = 1G
control_files = "C:\ORACLEXE\APP\ORACLE\ORADATA\XE\CONTROL.DBF"
compatible = "11.2.0.0.0"
db_recovery_file_dest = "C:\oraclexe\app\oracle\fast_recovery_area"
db_recovery_file_dest_size= 10G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers = 4
job_queue_processes = 4
audit_file_dest = "C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP"
db_name = "XE"
open_cursors = 300
diagnostic_dest = "C:\ORACLEXE\APP\ORACLE"
Thu Aug 16 16:03:48 2012
PMON started with pid=2, OS id=5692
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified !
Thu Aug 16 16:03:48 2012
PSP0 started with pid=3, OS id=5744
Thu Aug 16 16:03:48 2012
VKTM started with pid=4, OS id=5576 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Thu Aug 16 16:03:48 2012
GEN0 started with pid=5, OS id=4756
Thu Aug 16 16:03:48 2012
DIAG started with pid=6, OS id=1020
Thu Aug 16 16:03:48 2012
DBRM started with pid=7, OS id=5300
Thu Aug 16 16:03:48 2012
DIA0 started with pid=8, OS id=5864
Thu Aug 16 16:03:48 2012
MMAN started with pid=9, OS id=5636
Thu Aug 16 16:03:48 2012
DBW0 started with pid=10, OS id=3564
Thu Aug 16 16:03:48 2012
LGWR started with pid=11, OS id=5840
Thu Aug 16 16:03:48 2012
CKPT started with pid=12, OS id=5996
Thu Aug 16 16:03:48 2012
SMON started with pid=13, OS id=5280
Thu Aug 16 16:03:48 2012
RECO started with pid=14, OS id=5512
Thu Aug 16 16:03:48 2012
MMON started with pid=15, OS id=3684
Thu Aug 16 16:03:48 2012
MMNL started with pid=16, OS id=5104
Thu Aug 16 16:03:48 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
ORACLE_BASE from environment = C:\oraclexe\app\oracle
Thu Aug 16 16:03:48 2012
ALTER DATABASE MOUNT
Changing di2dbun from to XE
Successful mount of redo thread 1, with mount id 2672626596
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Thu Aug 16 16:03:53 2012
ALTER DATABASE OPEN
Thread 1 opened at log sequence 2
Current log# 2 seq# 2 mem# 0: C:\ORACLEXE\APP\ORACLE\FAST_RECOVERY_AREA\XE\ONLINELOG\O1_MF_2_82TNGRDB_.LOG
Successful open of redo thread 1
SMON: enabling cache recovery
[5776] Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:2384085 end:2384865 diff:780 (7 seconds)
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
Thu Aug 16 16:03:59 2012
SMON: enabling tx recovery
Database Characterset is AL32UTF8
Opening with Resource Manager plan: INTERNAL_PLAN_XE
Thu Aug 16 16:04:00 2012
Starting background process VKRM
Thu Aug 16 16:04:00 2012
VKRM started with pid=22, OS id=5816
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Thu Aug 16 16:04:03 2012
QMNC started with pid=24, OS id=4092
Thu Aug 16 16:04:06 2012
Completed: ALTER DATABASE OPEN
Thu Aug 16 16:04:14 2012
Starting background process CJQ0
Thu Aug 16 16:04:14 2012
CJQ0 started with pid=33, OS id=4932
Thu Aug 16 16:04:17 2012
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified !
Thu Aug 16 16:04:25 2012
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
Fri Oct 19 15:43:25 2012
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !
Fri Oct 19 15:43:28 2012
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.2.0.2.0 - Production
Time: 19-OCT-2012 15:43:28
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. !

Portege R830 - Windows won't start after I install Comodo Firewall

Good afternoon,
I purchased today a Portege R830, and after the Windows configuration was over, the first program I installed was the popular free firewall Comodo. After I rebooted, Windows 7 wouldn't start anymore. It would get stuck on the user login screen and I know it's a problem with the firewall because if I make a system restore to the restore point created by the firewall installer, the windows will start again.
So I ask if there is any incompability between the firewall and some software on the Toshiba. Has anyone ever had this problem? I've been trying to solve this issue all day long with no results. I even re-installed Windows 7 using the Toshiba recovery and the issue persists. I really love Comodo, and I want this firewall on my laptop, but Windows just won't start!
Any help would be very apreciated.

Hi jillefsky,
Have you disabled the Windows firewall before you started with Comodo firewall installation? As far as I know Portege R830 is delivered with preinstalled McAfee security software and you should remove this program before you install any other security tools.
Generally speaking this issue has nothing to do with Toshiba and its recommendable to contact Comodo directly. Maybe they know about this issue so they can give you a proper answer.
But I dont understand why this program is so important for you. Windows has already an internal firewall so such programs are not necessary in my opinion. Just install a good antivirus program like AntiVir and activate automatic Windows updates. Thats all!

Apache won't start after ColdFusion Install

Any suggestions on what to look for, as to why Apache will
not start after installing ColdFusion MX Dev Edition on a Win 2003
Server? Is there something in a log file I could look at? Any help
is appreciated. Also, when I take the JRUN mod out of the Config
file, Apache starts back up..
Thanks,
Brian

If you're using Apache 2.2+ and CFMX 7+, then you need to
apply
a
hotfix for CF.
Once you update the wsconfig.jar file, re-run the Web Server
Configuration Tool. Remove the old Apache mapping and create a new
one.

Vista won't start after fresh install of LabVIEW & 4G RAM

Since Vista is such a memory glutton I decided to upgrade my AMD64 box to 4 Gig RAM. Good idea, no? Turns out not. Now Vista won't start. It locks up at the (lack of) progress bar before the log-in screen. After much hollerin' and hair pullin' I reinstalled Vista and now it sees 3.25 Gig. I install updates; everything looks good; I install LabVIEW 8.0 and activate it. At restart WinDoze Vista won't start. Now I want to scream. My Linux (Ubuntu Gutsy) partition runs fine and indicates 3.9 Gig RAM.
What is LabVIEW installing that has caused this? Does anybody have a place to start looking?
Thank You for reading my rantings
LabVIEW 8.0.1; WinDoze XP
aut viam inveniam aut faciam

Well, NI doesn't claim LabVIEW 8.0 is Vista compatible.
If you did the full install, you probably also installed Device Drivers and such. If you used the ones released with 8.0, they are definitely not Vista compatible. Those device drivers will try to load during Vista bootup. If you did, you will need to do a clean uninstall following this procedure. Download the latest drivers from NI's website and see if that fixes your problem.
Message Edited by Matthew Kelton on 02-21-2008 12:50 AM

Older Macbook won't start after attempting to install snow leopard

A friend of mine with a pre intel notebook inadvertently tried to install Snow Leopard and now it won't start up. Any suggestions?

Hi DOGG,
I'm not sure if he erased... When you power it up you get the gray screen with the apple logo for a few minutes then it shuts down. I put Leopard in and pressed the C key while starting up and I got the Installer but my only choice was to erase everything and install or erase and journal or something like that. It shows that there is 23GB disk space remaining and 185 total so I was hesitant to proceed because it looks like maybe everything is still there. Then found my old Tiger install disk and tried to start from there and it just kept powering itself off after a minute or two. I read something about the Tiger install disks were specific to different models so maybe mine isn't compatible? Anyway, I've asked him to find his install disk so I can try that. But if it sounds like his hard drive is erased should I just go ahead with Leopard?

Weblogic Administrator Server won't start after a fresh WCC install

Hi guys, i followed this [install documentation|http://docs.oracle.com/cd/E23943_01/doc.1111/e14538/qiecm.htm#sthref8] to install wls and WCC on a OEL6 (64bit), all went relatively smoothly. Then when I get ready to start weblogic admin server for the first time, it errors out on me.
system:
-Oracle Enterprise Linux6 (64bit)
-WebLogic Server 12.1.1
-Webcenter Content 11g
-Oracle DB 11g
basic steps I've took:
1) RCU installed UCM, URM, IPM, and IBR schemas into 11g DB
2) installed wls, created a basic domain (base_domain) with Admin Server as a place holder
3) installed WCC, create new domain (wcc_domain) with Admin Server
4) start wls Admin Server: $WCC_DOMAIN_HOME/bin/startWebLogic.sh
5) error.......
[high level error msg]
Feb 12, 2013 10:27:07 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
WARNING: Opening of file based keystore failed.
<Feb 12, 2013 10:27:07 PM CST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
<Feb 12, 2013 10:27:07 PM CST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:148)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
     at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3099)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:374)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:105)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:77)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:67)
     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
     Truncated. see log file for complete stacktrace
[high level error msg]
steps I've took to tackle this problem:
1) removed $WCC_DOMAIN/security folder, then re-enter username/password
<result> can't find SerializedSystemIni.dat file
2) create a boot.properties file in folder
<result> same keystore error as above
3) re-generate a new SerializedSystemIni.dat file [described here|http://www.wikiconsole.com/wiki/?p=3041]
<result> same keystore error as above
4) tried modify cwallet.sso [described here|https://forums.oracle.com/forums/thread.jspa?threadID=2266436]
<result> can't modify, content in sso file is encrtyped
5) review message with debug option enabled
<result> it said error from LDAP [described here|http://docs.oracle.com/cd/E17904_01/core.1111/e10043/aptrouble.htm] but I don't have LDAP enabled/installed
6) create a key store based on WCC install doc (IRM section)
<result> same keystore error as above
none of the steps above work, only option left I can think of, is maybe install it with wls 10.3 (seems like that's what the installation doc used). I honestly hope it could be as simple as that, but if I'm missing anything critical, please let me know.
Thank you
p.s: please feel free to ask me to post the long lengthy debug output

Hi ,
First and foremost I am not sure why you have used WLS 12c to be installed for WCC environment . That is currently a non-supported configuration .
Secondly you are starting the admin server from <domain_home>/bin ? If yes , then go up the directory and start it from <domain_home> itself .
Check if that works .
Thanks,
Srinath

OAS WEB FORM 9.0.4 configuration for NLS_LENGTH_SEMANTICS=CHAR

We have NO issue using Oracle Form(Developer 2000) with Oracle Application Server Configuration with UTF8 characterset. Everything is set correctly.
As UTF8 is multi BYTE character set, we have to find a way Oracle Form can work with NLS_LENGTH_SEMANTICS=CHAR while inserting, updating etc upon datatype value. e.g. table a has a column b with VARCHAR2(400). We need to allow users to enter 400 character. We have database set up correctly to NLS_LENGTH_SEMANTICS=CHAR
Oracle FORM DOES WORK if we go to individual field/column(for the table) on form field property and modify SEMANTICS value from DEFAULT to CHAR.
Is there a way we can just modify default the OAS form level configuration for SEMANTICS to save time going to each form and modifying each filed to make it work?
Thanks in advance!
Nirali

Thanks a lot for quick reply!
We also have TAR open with Oracle. I think we just have to move on to manul affort. Thanks again!
Nirali

Installed Yosemite...now my MacBook pro won't start up. Keep showing "Kernel Panic!" HELP!

installed Yosemite and now my MacBook pro won't start up. Keeps showing "kernel panic"
PLEASE HELP ME!

If you can't start up and log in in the usual way, try in safe mode.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Log in as an administrator to carry out these instructions. If you have only one account, you are the administrator.
☞ If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode.
If you're able to log in, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.

OC4J won't start

I have just installed Oracle Developer Suite 10.1.2.0.2 (including Forms and Reports) on W/XP SP2.
When I try and startup the OC4J I get the following error. Any help will be much appreciated. Best regards,
Andrea Florit
C:\DevSuiteHome_1\j2ee\DevSuite>C:\DevSuiteHome_1\jdk\bin\java -Doracle.securit
y.jazn.config=C:\DevSuiteHome_1\j2ee\DevSuite\config\jazn.xml -Doracle.home=C:\D
evSuiteHome_1 -DORACLE_HOME=C:\DevSuiteHome_1 -jar C:\DevSuiteHome_1\j2ee\home\o
c4j.jar -userThreads -config C:\DevSuiteHome_1\j2ee\DevSuite\config\server.xml
07/04/13 23:24:20 Copying default deployment descriptor from archive at C:\DevSu
iteHome_1\reports\j2ee\reports_ids\web/WEB-INF/orion-web.xml to deployment direc
tory C:\DevSuiteHome_1\j2ee\DevSuite\application-deployments\reports\web...
07/04/13 23:24:20 Auto-deploying file:/C:/DevSuiteHome_1/reports/j2ee/reports_id
s/web/ (New server version detected)...
07/04/13 23:24:20 Error instantiating application 'reports' at file:/C:/DevSuite
Home_1/reports/j2ee/reports_ids.ear: Error loading web-app 'web' at C:\DevSuiteH
ome_1\reports\j2ee\reports_ids\web: Error writing orion-descriptor: IO Error: C:
\DevSuiteHome_1\j2ee\DevSuite\application-deployments\reports\web\orion-web.xml
(Access is denied)
Error initializing server: Error loading web-app 'web' at C:\DevSuiteHome_1\reports\j2ee\reports_ids\web: Unable to find/read deployment info for C:\DevSuiteHom
e_1\j2ee\DevSuite\application-deployments\reports\web (IO Error: C:\DevSuiteHome
_1\j2ee\DevSuite\application-deployments\reports\web\orion-web.xml (Access is de
nied))

Thank you for your reply, tgrall!
Yes, I checked the permissions on the directory and everything seems ok, but the error is still there.
The error occurs just after Developer Server installation so I can't figure out why the directory should be write-protected (the windows user I'm logged in during installation is a member of the Administrators group)
Best regards
Andrew

OHS won't start after installing Webpass

Hello, I installed OAS Infrastructure 10g 10.1.4.01 on a 32-bit Windows 2003 Server. Then I installed OID and OIS. OHS came up correctly.
Then I installed file Oracle_Access_Manager10_1_4_3_0_Win32_OHS11g_WebPass.exe, and now OHS will not come up.
The HTTP Server log has these lines:
Syntax error on line 1138 of c:/orahome_1/apache/apache/conf/httpd.conf:
Cannot load c:/program files/netpoint/webcomponent/identity/oblix/apps/webpass/bin/webpass_ohs22.dll into server: (126) The specified module could not be found:
True, httpd.conf was altered to try to load the above dll. And the dll is right where it is supposed to be. So then I thought, maybe it is trying to dynamically load some routines. I downloaded a program, "Dependency Walker", and fed webpass_ohs22.dll into it.
It says:
[ ? ] LIBAPR-1.DLL Error opening file. The system cannot find the file specified (2).
[ ? ] LIBAPRUTIL-1.DLL Error opening file. The system cannot find the file specified (2).
[ ? ] LIBHTTPD.DLL Error opening file. The system cannot find the file specified (2).
[D? ] IESHIMS.DLL Error opening file. The system cannot find the file specified (2).
[D? ] WER.DLL Error opening file. The system cannot find the file specified (2).
Anybody have any advice? Thanks!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Phone won't start after installing iOS 6

Alright, first post here so bear with me.
So I installed iOS 6 I think maybe last Sunday and everything was fine from there. Safari, messaging, photos, apps were all working well. After the install I had lost all my apps but it didn't bother me as I don't have many so I installed them all again.
Today I forgot to install a flashlight app so I decided to do so then my phone went black. I thought hmm thats odd, and tried turning it on but it wouldn't. I thought it had simply loss battery so I connected it and it still wouldn't turn on. I decided to press and hold the home and power button to try and restore it and the apple startup screen kept flashing on and off.
Eventually I was able to restore it after numerous attempts and I decided to back it up as I did not want to lose anything. Restored and everything fine again except I was left with no apps and music, so, a bit annoyed, I added a few albums and went to my bed for a nap and tried to install Alien Blue app on my phone to read to get me to sleep but crashed again.
Now I realize it's something to do with the app store so I realize I should just probably restore my iphone clean (real pain in the *** though) but now it's not letting me restore and the start up screen is just blinking on and off. Have it connected to my computer but itunes is not reading it and have gone into Services on computer and disabled then enabled Apple Phone Device but no dice.
Is there anyone that could help me please? I would really really appreciate it.
P.S. I have an iPhone 4 which I have had for nearly 2 years, my contract runs out in December.

You may of had a corrupted install. Connect to iTunes backup then restore. Or update the apps on itunes then sync to the iPhone

ITunes won't start after Windows 7 Repair install

Hi there
I recently had to repair my Windows 7 64 bit Home Premium edition installation. It warned me before reinstalling that there could be some problems with iTunes following the repair but I followed the instructions to counter this and repair Windows 7. i.e. I uninstalled all iTunes software as outlined on Apples pages.
On opening Windows 7 again I ended up with a Blue Screen of Death - this pointed me to a faulty iTunes installation - I checked control panel and sure enough it was not listed as uninstalled. I therefore followed online instructions to completely remove iTunes and used Revo Uninstaller Pro to catch anything I missed. All looked good, I rebooted my machine and then went to install iTunes again. I chose the 64bit installer from the site and installed as normal. I have now tried to open iTunes (to sync my iPhone) and it thinks about it for a second and then never opens. On opening task manager I can see iTunes.exe*32 (does this mean 32 bit and if so why when I've DEFINITELY got the 64 bit installation), iTunesHelper.exe*32 and AppleMobileDeviceHelper.exe*32 all in Processes - they are not in open programs.
Even stopping these processes does not help. iTunes was working fine before my Windows 7 problems on this machine and all other software seems ok too following my repair. Can someone please assist me in getting iTunes to work again with my computer as this is very frustrating. This is not the first time it has happened to me - on my old Vista machine (different machine totally) this happened once or twice intermittently but then seemed to resolve itself. I have defrag, disk doctor and run just about every utility I have installed to get my system working ok and the only problem seems to be iTunes. I'd therefore appreciate help in resolving this.
Many thanks

Did you try and update through itunes or download the installer from the apple website?
I've read some where its better to just download the stand alone installer from apple and
do it that way.

Install CC&B V2.2 on OAS - OC4J won't start after configuring for CC&B

Similar Messages

Maybe you are looking for