Install CF10 on Windows 8.1

Just transitioned to a new PC with W8.1  Developer/Trial version of CF10 downloaded, but Windows says it cannot be installed.

You can launch command prompt as administrator. Navigate to the installer directory and run the "ColdFusion 10 win64.exe" (installer name) the command.
Hope this helps
Regards,
Anit Kumar

Similar Messages

  • Trying to install cf10 on Windows 7, error Cannot configure IIS connector

    Trying to do a brand new install of CF10 on Win 7.
    As soon as I tell it to use all IIS websites, it bombs telling me to Ebable the required options under ASP.NET, CGI, ISAPI extensions. 
    Clearly IIS did not install correctly under Windows. 
    Tried uninstalling IIS, reinstalling. No dice.
    Or is this indeed a CF10 problem?

    Hi,
    Please ensure all of these IIS features are enabled:
    ASP.NET
    CGI
    ISAPI Extensions
    ISAPI Filters
    The above options can be installed, by following the steps mentioned under Installing IIS Features on Windows 7 at http://msdn.microsoft.com/en-us/library/hh167503(v=nav.70).aspx
    Regards,
    Anit Kumar

  • CF10 on Windows server 2008 (64bit): 32-bit CF cannot be installed, but 64-bit can.

    Hi, I have exhaused my research and ways of fixing this issue.
    I have a Windows Server 2008 (64-bit).
    I am able to install 64-bit CF10 on it and CF websites run just fine.
    On the same machine, I have a ASP website that must be in run in 32-bit and within this website there are some ColdFusion pages. So I have to install CF10 32 bit. So I uninstalled CF10 64bit.
    When installing CF10 32 bit, I always got error message:
    Cannot configure IIS connector. Enable the required option ASP.NET, ISAPI Extensions and ISAPI Filter in IIS under Windows Features and try again.
    I did lot of online research and found RELATED posts, but none of them worked for me. Basically, in my case I have the IIS following installed
    ISAPI Extensions
    ISAPI Filter
    ASP.NET
    CGI
    but I alway got the above error message. Cannot think of other reasons.
    Any help is really appreciated!!! I have been working on this thing for the past three working days.
    Regards.

    Hi,
    I saw your post which is similar to the problem I'm trying to solve.  I'm not sure if I need to post a new topic, but I thought just add it to your post.
    I installed CF10-64bit on Windows 2008 server (64 bit).  When I opened the CF admin, it gave me an error - HTTP Error 500.0 - Internal Server Error. The page cannot be displayed because an internal server error has occurred.  Module: IsapiModule, Handler: cfmHandler, Error Code: 0x800700c1.  After searching for solution in the internet, I finally made it work after changing the DefaultAppPool which is used by the CFIDE in the advance settings, the "Enable 32-bit Applications" to False.
    Now, my problem is I have an ASP application which requires that the application pool advance settings must be set to True for "Enable 32-bit Applications".  I created another application pool for this application.  It woks fine.  However, this ASP application calls some CF pages and I'm having a problem because the CF10 is set to use a different application pool with diferent setting for "Enable 32-bit Applications".
    In order for my application to work, it seems that I need to install the CF10 32 bit version.  Am I right?  Or is there a work around for my issue?
    Thanks in advance for any help.
    I'm going to create a new post for this.
    Message was edited by: tibay

  • After installing CF10, I get this error msg,"This page can't be displayed"

    After installing CF10, I get this error msg when I try to access the Administrator page,"This page can't be displayed"
    I'm running Window Server 2003, 64 bit version with IIS 6.0.
    Before I installed CF10, I uninstalled CF8.

    @Len said, “ BTW, there is no 64 Bit entry under Application Pools.”.
    I suspect @Anit was assuming you were using IIS 7, in which case you could check the IIS app pool (advanced settings, for the app pool used by the site you are browsing) to see if it was set to “enable 32-bit applications: false”, assuming CF is configured as 64-bit, or if CF is configured 32-bit, then you would want that to be set to “enable 32 bit applications: true”.
    It seems you’re using IIS 6, and there is no GUI means in the IIS 6 control panel to change the bitness of the app pool. There are various means discussing how to do that on the web, as well as a blog entry from Ben Forta, from back when people were deploying CF 7 (which was 32-bit only) 64-bit Windows and IIS:
    http://www.forta.com/blog/index.cfm/2006/2/6/connecting-coldfusion-mx-7-to-64bit-iis-6
    For those on IIS 7, here is at least one page showing how to configure it in IIS 7 (has no reference to CF, but I had a hard time finding any existing blog entry that showed screenshots of configuring this feature):
    https://help.webcontrolcenter.com/KB/a1114/how-to-enable-32-bit-application-pool-iis-7-ded icatedvps.aspx
    But back to your error, @Len, if setting the bitness of the IIS app pool is not the solution, I’ll note that there can be many other reasons that you get that error. What are you seeing in the Windows Event log (using “event viewer”), or the IIS logs (especially httperr.log), or the CF logs (\coldfusion10\cfusion\logs)?
    /charlie

  • Insufficient Permissions - can't install CF10 - OSX

    Noob.. installing CF10, Developer, says I don't have permissions to for my Startup Items folder, but I'm the only user. Is it because my MacOSX password is (purposely) blank?
    Also.. "Enter the username and password for remote start/stop administration." ... does this mean create one or that I should have one (from where?).  I do use a CF host (YoHost) ... is it that info?
    Like I said... Noob!
    Just trying to deploy a new app and use my Mac to test... is this possible or is a remote server a required component?
    - Rand

    Can you check permission to /Library/StartupItems by using getInfo or the ls -al command. If your user account has no write or execute permission, you can modify permission to the directory in the getInfo windows or with the chmod.
    When insalling CF if you choose to install the admin component for remote start/stop, you are required to specify a password for , new of course, for the component. This Component is used to remotely start/stop the server from applications such as Server Manager, Instance Manager in ColdFusion Administrator, or ColdFusion Builder. More details at, http://help.adobe.com/en_US/ColdFusion/10.0/Installing/WSc3ff6d0ea77859461172e0811cdec18c2 8-8000.html#WS932f2e4c7c04df8f288f04831353cc0bade-7ff7

  • Installing SAPNWABAP701SR1_TRIAL on Windows Vista - Error

    Hi,
    i have problems to install MiniSap on Windows Vista.
    Can you help me ?
    here ist the installation log.
    program is starting... Please wait!
    guiengine: call to bind() for socket 21200 484 failed . No such file or directory
    Starting GUIServer using:
      SAPinst port  : 21201
      GUIServer port: 21211
      HTTP port     : 4238
      GUI autostart : on
      GUI mode      : normal
      command       : "C:/Users/ULRICH1.HNP/AppData/Local/Temp/sapinst_exe.4528.1301139212/jre/binjava.exe" -cp "C:/Users/ULRICH1.HNP/AppData/Local/Temp/sapinst_exe.4528.1301139212jarinstgui.jar" -Xmx256M -Dsun.java2d.noddraw=true -Dsap.env.var.javahome=SAPINST_JRE_HOME SDTGui sapinst host=localhost port=21201 -nolock
    load resource pool D:DownloadssapSAPNWABAP701SR1_TRIALSAP_NetWeaver701SR1_2008_Installation_MasterIM_WINDOWS_I386
    esourcepool.xml
    guiengine: No GUI server connected; waiting for a connection on host HNPC1, port 21201 to continue with the installation
    Mar 26, 2011 11:34:20 AM : *************************
    Mar 26, 2011 11:34:20 AM : Starting Server
    Mar 26, 2011 11:34:20 AM : Reading server configuration.
    Mar 26, 2011 11:34:21 AM : Reading service configuration SAPinstService.
    Mar 26, 2011 11:34:21 AM : Configuring LogManager ...
    Mar 26, 2011 11:34:21 AM : *************************************************
    Mar 26, 2011 11:34:21 AM : Starting SL Controller ...
    Mar 26, 2011 11:34:21 AM : StorageService switched off.
    Mar 26, 2011 11:34:21 AM : Initializing SecurityManager ...
    Mar 26, 2011 11:34:21 AM : Key Store management switched off.
    Mar 26, 2011 11:34:21 AM : Configuring HTTPManager ...
    Mar 26, 2011 11:34:21 AM : WebstartService switched off.
    Mar 26, 2011 11:34:21 AM : RoleService switched off.
    Mar 26, 2011 11:34:21 AM : AlertService switched off.
    Mar 26, 2011 11:34:21 AM : NotesService switched off.
    Mar 26, 2011 11:34:21 AM : ProcessService switched off.
    Mar 26, 2011 11:34:21 AM : Starting MIDService ...
    Mar 26, 2011 11:34:21 AM : Starting FileService ...
    Mar 26, 2011 11:34:21 AM : LogService switched off.
    Mar 26, 2011 11:34:21 AM : MailService switched off.
    Mar 26, 2011 11:34:21 AM : Starting services ...
    Mar 26, 2011 11:34:21 AM : Starting service "SAPinstService" ...
    Mar 26, 2011 11:34:21 AM : Service "SAPinstService" started
    Mar 26, 2011 11:34:21 AM : Services started.
    Mar 26, 2011 11:34:21 AM : Starting HTTP server listening on port 4239 ...
    Mar 26, 2011 11:34:21 AM : HTTP server started.
    Mar 26, 2011 11:34:21 AM : SL Controller started.
    Mar 26, 2011 11:34:21 AM : Starting GUI ...
    guiengine: 2011-03-26 12:34:24 Login successful
    Mar 26, 2011 11:34:25 AM : GUI started.
    INFO       2011-03-26 12:34:18.735 synxcpath.cpp:776
               CSyPath::createFile()
    Creating file C:Program Filessapinst_instdirx.
    INFO       2011-03-26 12:34:18.735 synxcfile.cpp:177
               CSyFileImpl::remove()
    Removing file C:Program Filessapinst_instdirx.
    INFO       2011-03-26 12:34:42.435 synxcpath.cpp:776
               CSyPath::createFile()
    Creating file C:Program Filessapinst_instdirNW701AS-ABAPADACENTRALx.
    INFO       2011-03-26 12:34:42.435 synxcfile.cpp:177
               CSyFileImpl::remove()
    Removing file C:Program Filessapinst_instdirNW701AS-ABAPADACENTRALx.
    INFO       2011-03-26 12:34:45.274 synxcpath.cpp:776
               CSyPath::createFile()
    Creating file C:Program Filessapinst_instdirx.
    INFO       2011-03-26 12:34:45.274 synxcfile.cpp:177
               CSyFileImpl::remove()
    Removing file C:Program Filessapinst_instdirx.
    INFO       2011-03-26 12:34:47.255 synxcfile.cpp:493
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/statistic.6.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copied file 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/statistic.6.xml'.
    INFO       2011-03-26 12:34:47.692 synxcfile.cpp:493
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/statistic.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copied file 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/statistic.7.xml'.
    WARNING    2011-03-26 12:34:48.550 synxcpath.cpp:912
               CSyPath::getOSNodeType(bool )
    Unable to get information about path
    LABEL.ASC using GetVolumeInformation. Operating system error message: Der angegebene Pfadname ist ungültig.
    INFO       2011-03-26 12:34:53.464 synxcfile.cpp:493
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/inifile.4.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copied file 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/inifile.4.xml'.
    INFO       2011-03-26 12:34:53.480 synxcfile.cpp:493
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/inifile.5.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copied file 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/inifile.5.xml'.
    INFO       2011-03-26 12:34:53.636 sixxcstepexecute.cpp:388
    Execute step
    Component  W2K_ServicePack_Check|ind|ind|ind|ind
    Preprocess  of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
    INFO       2011-03-26 12:34:59.891 synxcfile.cpp:493
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/keydb.3.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copied file 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/keydb.3.xml'.
    INFO       2011-03-26 12:34:59.907 synxcfile.cpp:493
               CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/statistic.8.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const 
    Copied file 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/statistic.8.xml'.
    INFO       2011-03-26 12:34:59.923 sixxcstepexecute.cpp:790
    Execute step verifyPolicy of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_getJavaHome|ind|ind|ind|ind|0|0
    INFO       2011-03-26 12:34:59.954 sixxcstepexecute.cpp:790
    Execute step setNWOption of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_getJavaHome|ind|ind|ind|ind|0|0
    WARNING    2011-03-26 12:35:00.032
               CJSlibModule::writeWarning_impl()
    Could not determine a valid JAVA_HOME directory from the environment.
    INFO       2011-03-26 12:35:00.94 sixxcstepexecute.cpp:790
    Execute step collect of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0
    WARNING    2011-03-26 12:35:00.188 ianxcreghelper.cpp:235
               CNTRegistryKey::CNTRegistryKey(., HKEY_LOCAL_MACHINE, SYSTEMCurrentControlSetServicesBHDrvx86, ...)
    Error 5 (Zugriff verweigert
    ) in execution of a 'RegOpenKeyEx' function, line (81), with parameter (SYSTEMCurrentControlSetServicesBHDrvx86).
    WARNING    2011-03-26 12:35:00.188 ianxcreghelper.cpp:469
               CNTRegistryKey::CNTRegistryKey(., HKEY_LOCAL_MACHINE, SYSTEMCurrentControlSetServicesBHDrvx86, ...)
    The subkey 'HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesBHDrvx86' does not exist on the 'localhost' host.
    ERROR      2011-03-26 12:35:00.188
               CJSlibModule::writeError_impl()
    MOS-01185  The subkey 'HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesBHDrvx86' does not exist on the 'localhost' host.
    ERROR      2011-03-26 12:35:00.188 sixxcstepexecute.cpp:950
    FCO-00011  The step collect with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR ( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesBHDrvx86' does not exist on the 'localhost' host.).
    INFO       2011-03-26 12:35:23.479 sixxcstepexecute.cpp:1003
    An error occured and the user decided to stop.
    Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
    INFO       2011-03-26 12:35:33.868 synxcpath.cpp:776
               CSyPath::createFile()
    Creating file C:Program Filessapinst_instdirNW701AS-ABAPADACENTRALlistOfSupportFilesToBePacked.lst.
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/change.log
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/control.xml
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/controllerKdbClient.dmp
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/instana.xsl
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/keydb.xml
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/msiexec.log
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/sapinst.1.log
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/sapinst.2.log
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/sapinst.log
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/sapinst_dev.1.log
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/sapinst_dev.2.log
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/sapinst_dev.log
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/start_dir.cd
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/stepKeydbClient.dmp
    a C:/Program Files/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/vcredist_x86.log
    a C:/Users/ULRICH~1.HNP/AppData/Local/Temp/sapinst_exe.4528.1301139212/dev_selfex.out
    a C:/Users/ULRICH~1.HNP/AppData/Local/Temp/sapinst_exe.4628.1301138799/dev_selfex.out
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/FileService.log
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/MIDService.log
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/SAPinstService.log
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/SDTServer.log
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/gui.err
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/gui.log
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/gui.log.lck
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/gui.out
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/gui.trc
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/gui.trc.lck
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/server.err
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/server.out
    a C:/Users/Ulrich.HNPC1/.sdtgui/log/server.trc
    Abort execution because of
    controller.userDecideToStop
    INFO       2011-03-26 12:35:35.116 synxcpath.cpp:776
               CSyPath::createFile()
    Creating file C:Program Filessapinst_instdir.lastInstallationLocation.
    INFO       2011-03-26 12:35:35.132 synxcpath.cpp:776
               CSyPath::createFile()
    Creating file C:Program Filessapinst_instdirNW701AS-ABAPADACENTRAL__instana_tmp.xml.
    Mar 26, 2011 11:35:35 AM : Stopping services ...
    Mar 26, 2011 11:35:35 AM : Stopping service "SAPinstService" ...
    Mar 26, 2011 11:35:35 AM : Service "SAPinstService" stopped.
    Mar 26, 2011 11:35:35 AM : Services stopped.
    Mar 26, 2011 11:35:35 AM : Server shutdown by SAPinstService
    Exit status of child: 2

    SAPinst is having problems starting up.
    Please post the sapinst.log file from C:\Program Files\sapinst_dir
    Make sure you do the following.
    1.) Turn off Windows Firewall
    2.) Turn off UAC (http://www.petri.co.il/disable_uac_in_windows_vista.htm)
    3.) Install right version of JRE/JDK (1.4.2 Update 29)
    4.) Set the correct User Environment Variables (JAVA_HOME, SAPSYSTEMNAME)
    5.) Delete all SAP folders/contents in TEMP folder of your user profile (C:/Users/ULRICH~1.HNP/AppData/Local/Temp/.....).
    5.) Delete C:\Program Files\sapinst_dir\ folder.  This will be recreated when SAPinst starts again.
    Give this a shot and see what happens.
    Regards,
    Ravi

  • Problem installing printer on windows 7 enterprise machine

    Hi
    I have HP Color LaserJet CP2025DN printer which i'm trying to install on my windows 7 machine. I have search on HP site where I was told that I can get the driver from windows update but when I run the windows update I cant seem to find cp2025dn or cp2020
    printer from list.
    Can someone please help me installing this printer.
    When I go into my printer and device I see this icon.
    My printer usb info
    USB\VID_03F0&PID_5417&REV_0100

    Hi,
    Since all drivers in Windows update are produced from manufacturer and then after passing the Windows Logo Program testing, then they can be distribute onto update, that should be little delayed. I
    suggest we download the latest driver applied to Windows 7 from manufacturer site.
    Before installing the driver, is suggest you open Control Panel\All Control Panel Items\Programs and Features and delete the printer driver that is already installed.
    I'm seeing a lot of information about the HP LaserJet CP2025dn not working properly with Windows 7.
    I suggest contacting HP for the drivers support for Windows 7, or you can install the driver with Vista compatible mode for test:
    1. Insert the installation media, right click on the DVD drive icon and choose Open
    2. In the open folder, right click the program setup.exe file and click the Properties option.
    3. Select the Compatibility tab.
    4. Select the Run This Program in Compatibility Mode option.
    5. From the drop-down list, choose the operating system you ran before upgrading to Vista.
    6. If necessary, select the option to run the program as an administration.
    7. Click OK.
    Now, right click on Setup.exe and choose Run as administrator to install it again.
    Furthermore, you can try to use Windows XP mode to use these printer.
    Install and use Windows XP Mode in Windows 7
    http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7
    I also would like to suggest you contact HP directly to consult the issue. In this way, your issue can be fixed efficiently.
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • Unable to install itunes in windows 7 64 bit - hanging

    Unable to install itunes in windows 7 64 bit - screen is hanging after first few steps ...
    Also i am unable to uninstall Apple update software. Are these both related.
    Now how do i get the software installed( itunes installed in windows 7)

    Hey gigipramod,
    Thanks for the question. I understand you are experiencing issues installing iTunes. The following resource may provide a solution:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thanks,
    Matt M.

  • I couldn't install itunes in windows 7, 64 bit, DLL not found, can any one assist

    Windows 7, 64 bit, unable to install. DLL missing, kindly assist.

    That's perfect, thanks.
    Although you're getting a different error message, try the procedure from the following user tip with that one:
    "The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

  • Why can't I install Itunes on windows vista 64 bit?

    Why can't I install Itunes on windows vista 64 bit? I have removed all apple software and repeated the reinstall many times but it fails.  I get this complicated error mesage and then the installer rolls back and fails.

    I get this complicated error mesage and then the installer rolls back and fails.
    I'd like to have a closer look at that error message please.
    Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
    Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

  • How do I install Bootcamp on Windows 7.

    I have just installed Windows 7 on my Mac Mini and now I want to switch back to the Mac OS. When I hold down Alt while booting up to change OS nothing happens.
    The other option is to install Bootcamp to work with windows. It's already on my mac as I used it to install Windows 7. But there is no option to switch OS with Bootcamp as I can't find it on Windows 7. I've seen tutorials on how to install it with a disk but the Mac mini has no optical drive.
    How do I install Bootcamp on Windows??

    At first I was under the impression i had accidentily deleted the MAC OS but thankfully I haven't. I did a system restore on Windows and when it restarted I held Alt and I could select my OS.
    But I still don't have the shortcut to bootcamp showing in windows. How do you make a bootable USB for Bootcamp?

  • Error message when installing Safari on Windows xp

    Tried to install Safari on Windows XP.
    Recived the following message;
    "The older version of Apple Software Update cannont be removed. Contact you technical support group."
    Then this message,
    "Safari Installer Interrupted"
    What do I do and how do I fix it?

    Hello, dtharachai. 
    Thank you for the question.  Here are a couple things you could try to troubleshoot this issue.  You can try to repair the program Apple Software Update by following the first article below.  After you process these steps, attempt to uninstall this program.  If that step does not work, I have included a more in depth troubleshooting article that will help you uninstall program.  Once this is done you should be able to install Safari. 
    How to repair Software Update for Windows
    http://support.apple.com/kb/TA24326
    "The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H. 

  • I had a problem installing icloud on windows 8.1. What should I do? At the end of the installation process there is a error message.

    I had a problem installing icloud on windows 8.1. At the end of the installation process there is a error message.What should I do? 

    I'm guessing that you have checked and complied with the system requirements?
    System Requirements
    Microsoft Windows 7 or 8
    Microsoft Outlook 2007 or later or an up-to-date browser (for Mail, Contacts, Calendars)
    Internet Explorer 9 or later, Firefox 22 or later, or Google Chrome 28 or later (for Bookmarks)
    Broadband Internet access
    Note: If you are upgrading from iCloud Control Panel 1.1 or earlier, you will need to sign out of iCloud Control Panel and uninstall it before downloading iCloud Control Panel 3.1

  • TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

    Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
    This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
    1. The phone charges it's battery
    2. I can open it in My Computer and import/export media files.
    In iTunes
    3. It start to sync until step 3 then stops.
    4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
    I hope you can provide me a solution for this problem.
    Thanks,
    Ralph

    Hi ralphagir,
    Welcome to the Apple Support Communities!
    For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
    Safely disconnect iPod
    http://support.apple.com/kb/HT1853
    Have a great day,
    Joe

  • Unable to install DPM2012R2 on Windows 2008 R2 or Windows 2012 Server :(

    Hi together
    I'm trying installing (fresh) on a new Win 2008 R2 System DPM2012R2, i tryed the same on Server 2012.
    I got every time a error message while its installing DPM (after the SQL prepraration).
    I tested with SQL 2008 R2 Standard and SQL 2012 Standard without success.
    On the Setup, the setup Clients dies and gives me dotn.net error Message:
    1. Dialogbox
    An unexpexted error occured during the installation
    Fore more details, check the DPM Setup error logs.
    ID: 4387
    SetupDpm.exe has stopped working
    Problem signature:
      Problem Event Name: CLR20r3
      Problem Signature 01: setupdpm.exe
      Problem Signature 02: 1.0.523.0
      Problem Signature 03: 5226e038
      Problem Signature 04: mscorlib
      Problem Signature 05: 4.0.0.0
      Problem Signature 06: 517a19ee
      Problem Signature 07: 2606
      Problem Signature 08: 9c
      Problem Signature 09: System.IO.FileLoadException
      OS Version: 6.1.7601.2.1.0.272.7
      Locale ID: 2055
      Additional Information 1: 88d5
      Additional Information 2: 88d5dcdc6016348f4f024ac221a8d43d
      Additional Information 3: 7cab
      Additional Information 4: 7cab783845fc6de75e0b56019fda732a
    2. DPM Log
    [08.11.2013 14:54:47] Information : Microsoft System Center 2012 R2 Data Protection Manager setup started.
    [08.11.2013 14:54:47] Data : Mode of setup = User interface
    [08.11.2013 14:54:47] Data : OSVersion = Microsoft Windows NT 6.1.7601 Service Pack 1
    [08.11.2013 14:54:47] Information : Check if the media is removable
    [08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:54:47] Data : Drive Name = C:\
    [08.11.2013 14:54:47] Data : Drive Type = 3
    [08.11.2013 14:54:47] Information : Check attributes of the directory
    [08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:54:47] Data : File Attributes = Directory
    [08.11.2013 14:54:47] Information : Check if the media is removable
    [08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [08.11.2013 14:54:47] Data : Drive Name = C:\
    [08.11.2013 14:54:47] Data : Drive Type = 3
    [08.11.2013 14:54:47] Information : Check attributes of the directory
    [08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [08.11.2013 14:54:47] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft Data Protection Manager'.
    File name: 'C:\Program Files\Microsoft Data Protection Manager'
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:54:47] Information : Check if the media is removable
    [08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:54:47] Data : Drive Name = C:\
    [08.11.2013 14:54:47] Data : Drive Type = 3
    [08.11.2013 14:54:47] Information : Check attributes of the directory
    [08.11.2013 14:54:47] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:54:47] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:54:48] Information : The setup wizard is initialized.
    [08.11.2013 14:54:48] Information : Starting the setup wizard.
    [08.11.2013 14:54:48] Information : <<< Dialog >>> Welcome Page : Entering
    [08.11.2013 14:54:56] Information : <<< Dialog >>> Welcome Page : Leaving
    [08.11.2013 14:54:56] Information : <<< Dialog >>> Inspect Page : Entering
    [08.11.2013 14:55:02] Information : The setup was cancelled by user.
    [08.11.2013 14:55:02] Information : Microsoft System Center 2012 R2 Data Protection Manager setup over.
    [08.11.2013 14:58:52] Information : Microsoft System Center 2012 R2 Data Protection Manager setup started.
    [08.11.2013 14:58:52] Data : Mode of setup = User interface
    [08.11.2013 14:58:52] Data : OSVersion = Microsoft Windows NT 6.1.7601 Service Pack 1
    [08.11.2013 14:58:52] Information : Check if the media is removable
    [08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:58:52] Data : Drive Name = C:\
    [08.11.2013 14:58:52] Data : Drive Type = 3
    [08.11.2013 14:58:52] Information : Check attributes of the directory
    [08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:58:52] Data : File Attributes = Directory
    [08.11.2013 14:58:52] Information : Check if the media is removable
    [08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [08.11.2013 14:58:52] Data : Drive Name = C:\
    [08.11.2013 14:58:52] Data : Drive Type = 3
    [08.11.2013 14:58:52] Information : Check attributes of the directory
    [08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft Data Protection Manager
    [08.11.2013 14:58:52] * Exception : Ignoring the following exception intentionally => System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Microsoft Data Protection Manager'.
    File name: 'C:\Program Files\Microsoft Data Protection Manager'
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:58:52] Information : Check if the media is removable
    [08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:58:52] Data : Drive Name = C:\
    [08.11.2013 14:58:52] Data : Drive Type = 3
    [08.11.2013 14:58:52] Information : Check attributes of the directory
    [08.11.2013 14:58:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:58:52] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:58:53] Information : The setup wizard is initialized.
    [08.11.2013 14:58:53] Information : Starting the setup wizard.
    [08.11.2013 14:58:53] Information : <<< Dialog >>> Welcome Page : Entering
    [08.11.2013 14:58:54] Information : <<< Dialog >>> Welcome Page : Leaving
    [08.11.2013 14:58:54] Information : <<< Dialog >>> Inspect Page : Entering
    [08.11.2013 14:59:05] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
    [08.11.2013 14:59:05] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
    [08.11.2013 14:59:05] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 14:59:06] Data : Path of inspection output xml = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:06] Information : Instantiating inspect component.
    [08.11.2013 14:59:06] Data : Path of output xml = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:06] Information : Deserializing the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\checks.xml
    [08.11.2013 14:59:06] Information : Loading the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\checks.xml
    [08.11.2013 14:59:06] Information : Deserialising the scenario XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\scenarios.xml
    [08.11.2013 14:59:06] Information : Loading the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\scenarios.xml
    [08.11.2013 14:59:06] Information : Getting scenarios for the product: DPM
    [08.11.2013 14:59:06] Information : Getting scenarios for DPM
    [08.11.2013 14:59:06] Information : Getting scenario for Mode:Install, DbLocation:Remote, SKU:Retail and CCMode:NotApplicable
    [08.11.2013 14:59:06] Information : Query WMI provider for SQL Server 2008.
    [08.11.2013 14:59:06] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement10 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
    [08.11.2013 14:59:07] Information : SQL Server 2008 R2 SP2 instance DPM is not present on this system.
    [08.11.2013 14:59:07] Information : Query WMI provider for SQL Server 2008.
    [08.11.2013 14:59:07] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
    [08.11.2013 14:59:07] Information : SQL Server 2008 R2 SP2 instance DPM is present on this system.
    [08.11.2013 14:59:07] Information : Inspect context initialized with
    SQL Server namespace:
    \\{0}\root\Microsoft\SqlServer\ComputerManagement11
    Reporting namespace:
    \\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
    SqlServerDetected: True
    [08.11.2013 14:59:07] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
    [08.11.2013 14:59:07] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
    [08.11.2013 14:59:07] Information : **************************************************************************************
    [08.11.2013 14:59:07] Information : Start Inspect.
    [08.11.2013 14:59:07] Information : Getting checks for the group : Common
    [08.11.2013 14:59:07] Information : Getting checks for the group : Install
    [08.11.2013 14:59:07] Information : Getting checks for the group : Retail
    [08.11.2013 14:59:07] Information : Getting checks for the group : Remote
    [08.11.2013 14:59:07] Information : Check if the machine role is Domain Controller.
    [08.11.2013 14:59:07] Information : Querying WMI Namespace:
    \\localhost\root\cimv2 for query: SELECT * FROM Win32_ComputerSystem
    [08.11.2013 14:59:07] Data : Localhost in Computer role = 3
    [08.11.2013 14:59:07] Information : The machine role is not a Domain Controller.
    [08.11.2013 14:59:07] Data : checkId = Processor
    [08.11.2013 14:59:07] Information : Running the check: Processor
    [08.11.2013 14:59:07] Information : Getting the check for the checkId : Processor
    [08.11.2013 14:59:07] Information : Calling the method: CheckProcessor
    [08.11.2013 14:59:07] Information : Check processor configuration.
    [08.11.2013 14:59:07] Information : Query WMI provider for configuration of processor.
    [08.11.2013 14:59:07] Information : Querying WMI Namespace:
    \\localhost\root\cimv2 for query: SELECT * FROM Win32_Processor
    [08.11.2013 14:59:08] Data : Clock speed of processor = 1900
    [08.11.2013 14:59:08] Data : Manufacturer of processor = GenuineIntel
    [08.11.2013 14:59:08] Information : Adding the check result entry for checkId: Processor and result: 0
    [08.11.2013 14:59:08] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:08] Data : Result = 0
    [08.11.2013 14:59:08] Data : checkId = Memory
    [08.11.2013 14:59:08] Information : Running the check: Memory
    [08.11.2013 14:59:08] Information : Getting the check for the checkId : Memory
    [08.11.2013 14:59:08] Information : Calling the method: CheckPhysicalMemory
    [08.11.2013 14:59:08] Information : Check the amount of RAM.
    [08.11.2013 14:59:08] Information : Query WMI provider for configuration of memory.
    [08.11.2013 14:59:08] Information : Querying WMI Namespace:
    \\localhost\root\cimv2 for query: SELECT * FROM Win32_OperatingSystem
    [08.11.2013 14:59:08] Data : Found memory = 25119276
    [08.11.2013 14:59:08] Data : Total amount of memory = 25119276
    [08.11.2013 14:59:08] Information : Adding the check result entry for checkId: Memory and result: 0
    [08.11.2013 14:59:08] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:08] Data : Result = 0
    [08.11.2013 14:59:08] Data : checkId = MMCVersion
    [08.11.2013 14:59:08] Information : Running the check: MMCVersion
    [08.11.2013 14:59:08] Information : Getting the check for the checkId : MMCVersion
    [08.11.2013 14:59:08] Information : Calling the method: CheckMMCVersion
    [08.11.2013 14:59:08] Information : Check the version of Microsoft Management Console on the machine.
    [08.11.2013 14:59:09] Data : Version of Microsoft Management Console on the machine = 6.1.7600.16385
    [08.11.2013 14:59:09] Data : Required version of Microsoft Management Console = 5.2.3790.2560
    [08.11.2013 14:59:09] Information : MMC correct version is detected.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: MMCVersion and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = KB962975
    [08.11.2013 14:59:09] Information : Running the check: KB962975
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : KB962975
    [08.11.2013 14:59:09] Information : Calling the method: CheckWindowsHotfix
    [08.11.2013 14:59:09] Information : Check if KB962975 QFE is applied.
    [08.11.2013 14:59:09] Information : KB962975 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Check if KB962975 QFE is applied.
    [08.11.2013 14:59:09] Information : KB962975 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: KB962975 and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = KB975759
    [08.11.2013 14:59:09] Information : Running the check: KB975759
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : KB975759
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\KB975759.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\KB975759 is absent.
    [08.11.2013 14:59:09] Information : Calling the method: CheckWindowsHotfix
    [08.11.2013 14:59:09] Information : Check if KB975759 QFE is applied.
    [08.11.2013 14:59:09] Information : KB975759 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Check if KB975759 QFE is applied.
    [08.11.2013 14:59:09] Information : KB975759 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: KB975759 and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = KB2279787
    [08.11.2013 14:59:09] Information : Running the check: KB2279787
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : KB2279787
    [08.11.2013 14:59:09] Information : Calling the method: CheckWindowsHotfix
    [08.11.2013 14:59:09] Information : Check if KB2279787 QFE is applied.
    [08.11.2013 14:59:09] Information : KB2279787 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Check if KB2279787 QFE is applied.
    [08.11.2013 14:59:09] Information : KB2279787 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: KB2279787 and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = KB2223201
    [08.11.2013 14:59:09] Information : Running the check: KB2223201
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : KB2223201
    [08.11.2013 14:59:09] Information : Calling the method: CheckWindowsHotfix
    [08.11.2013 14:59:09] Information : Check if KB2223201 QFE is applied.
    [08.11.2013 14:59:09] Information : KB2223201 QFE is applied on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: KB2223201 and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = MonadSoftware
    [08.11.2013 14:59:09] Information : Running the check: MonadSoftware
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : MonadSoftware
    [08.11.2013 14:59:09] Information : Calling the method: CheckMonadSoftware
    [08.11.2013 14:59:09] Information : Detect if PowerShell is installed.
    [08.11.2013 14:59:09] Data : Installed Version of Windows PowerShell. = 6.2.9200.16398
    [08.11.2013 14:59:09] Data : Minimum Required version of Windows PowerShell. = 6.0.6002.18111
    [08.11.2013 14:59:09] Information : Required version of PowerShell software is installed on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: MonadSoftware and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = DotNetRequiresReboot
    [08.11.2013 14:59:09] Information : Running the check: DotNetRequiresReboot
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : DotNetRequiresReboot
    [08.11.2013 14:59:09] Information : Calling the method: CheckDotNetRequiresReboot
    [08.11.2013 14:59:09] Information : Check if reboot is required because of Dot Net installation.
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\DotNetRequiredReboot is absent.
    [08.11.2013 14:59:09] Information : Reboot is not required.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: DotNetRequiresReboot and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SISFilter
    [08.11.2013 14:59:09] Information : Running the check: SISFilter
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SISFilter
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SISFilter.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SISFilter is absent.
    [08.11.2013 14:59:09] Information : Calling the method: CheckSISFilter
    [08.11.2013 14:59:09] Information : Detect if SIS Service is running.
    [08.11.2013 14:59:09] Information : Detect if SIS Filter service SIS is running.
    [08.11.2013 14:59:09] Information : SIS Service SIS is running on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SISFilter and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = MSIVersion
    [08.11.2013 14:59:09] Information : Running the check: MSIVersion
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : MSIVersion
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\MSIVersion.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\MSIVersion is absent.
    [08.11.2013 14:59:09] Information : Calling the method: CheckMSIVersion
    [08.11.2013 14:59:09] Information : Check the version of Windows Installer on the machine.
    [08.11.2013 14:59:09] Data : Version of Windows Installer on the machine = 5.0.7601.17807
    [08.11.2013 14:59:09] Data : Required version of Windows Installer = 4.5.6001.18000
    [08.11.2013 14:59:09] Information : Windows Installer correct version is detected.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: MSIVersion and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = RebootRequired
    [08.11.2013 14:59:09] Information : Running the check: RebootRequired
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : RebootRequired
    [08.11.2013 14:59:09] Information : Calling the method: CheckRebootRequired
    [08.11.2013 14:59:09] Information : Check if reboot is required.
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\RebootRequired is absent.
    [08.11.2013 14:59:09] Information : Reboot is not required.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RebootRequired and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SQLServerTools
    [08.11.2013 14:59:09] Information : Running the check: SQLServerTools
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLServerTools
    [08.11.2013 14:59:09] Information : Calling the method: CheckSqlServerTools
    [08.11.2013 14:59:09] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
    [08.11.2013 14:59:09] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlServerTools and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SQLServer
    [08.11.2013 14:59:09] Information : Running the check: SQLServer
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLServer
    [08.11.2013 14:59:09] Information : Calling the method: CheckSqlServer
    [08.11.2013 14:59:09] Information : Check if SQL Server 2008 R2 SP2 is installed.
    [08.11.2013 14:59:09] Information : Query WMI provider for SQL Server 2008.
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
    [08.11.2013 14:59:09] Information : SQL Server 2008 R2 SP2 instance DPM is present on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlServer and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = ReportingServer
    [08.11.2013 14:59:09] Information : Running the check: ReportingServer
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : ReportingServer
    [08.11.2013 14:59:09] Information : Calling the method: CheckReportingServer
    [08.11.2013 14:59:09] Information : Check if Reporting Server 2008 R2 SP2 is installed.
    [08.11.2013 14:59:09] Information : Query WMI provider for Reporting Server 2008 R2 SP2.
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11 for query: SELECT * FROM MSReportServer_Instance WHERE InstanceName='DPM'
    [08.11.2013 14:59:09] Information : Reporting Server 2008 R2 SP2 instance DPM is present on this system.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: ReportingServer and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SQLAgentService
    [08.11.2013 14:59:09] Information : Running the check: SQLAgentService
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLAgentService
    [08.11.2013 14:59:09] Information : Calling the method: CheckSqlAgentServiceConfig
    [08.11.2013 14:59:09] Information : Check SQL Server Agent service configuration.
    [08.11.2013 14:59:09] Data : SQL Server instance name = DPM
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='SQLAgent$DPM'
    [08.11.2013 14:59:09] Data : Credentials of the service = LocalSystem
    [08.11.2013 14:59:09] Information : SQL Server Agent service configuration is correct.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlAgentService and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SQLServerService
    [08.11.2013 14:59:09] Information : Running the check: SQLServerService
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLServerService
    [08.11.2013 14:59:09] Information : Calling the method: CheckSqlServerServiceConfig
    [08.11.2013 14:59:09] Information : Check SQL Server service configuration.
    [08.11.2013 14:59:09] Data : SQL Server instance name = DPM
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='MSSQL$DPM'
    [08.11.2013 14:59:09] Data : Credentials of the service = LocalSystem
    [08.11.2013 14:59:09] Information : SQL Server service configuration is correct.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlServerService and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SqlServerReportingServices
    [08.11.2013 14:59:09] Information : Running the check: SqlServerReportingServices
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SqlServerReportingServices
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlServerReportingServices.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlServerReportingServices is absent.
    [08.11.2013 14:59:09] Information : Calling the method: CheckSqlServerReportingServices
    [08.11.2013 14:59:09] Information : Check if SQL Server 2008 Reporting Services is installed.
    [08.11.2013 14:59:09] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
    [08.11.2013 14:59:09] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlServerReportingServices and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SqlReportServerService
    [08.11.2013 14:59:09] Information : Running the check: SqlReportServerService
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SqlReportServerService
    [08.11.2013 14:59:09] Information : Reading the registry key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlReportServerService.
    [08.11.2013 14:59:09] Information : Registry Key Software\Microsoft\Microsoft Data Protection Manager\Setup\SqlReportServerService is absent.
    [08.11.2013 14:59:09] Information : Calling the method: CheckRosettaServicesConfig
    [08.11.2013 14:59:09] Information : Check SQL Server 2008 Reporting Services report server service configuration.
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\cimv2 for query: SELECT * FROM Win32_Service WHERE Name='ReportServer$DPM'
    [08.11.2013 14:59:09] Data : Credentials of the service = LocalSystem
    [08.11.2013 14:59:09] Information : Report Server service configuration is correct.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlReportServerService and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = ActiveDirectory
    [08.11.2013 14:59:09] Information : Running the check: ActiveDirectory
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : ActiveDirectory
    [08.11.2013 14:59:09] Information : Calling the method: DetectActiveDirectory
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: ActiveDirectory and result: 0

    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = SQLEval
    [08.11.2013 14:59:09] Information : Running the check: SQLEval
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : SQLEval
    [08.11.2013 14:59:09] Information : Calling the method: DetectSqlEval
    [08.11.2013 14:59:09] Information : Detect if SQL Server is evaluation edition
    [08.11.2013 14:59:09] Information : Starting service
    [08.11.2013 14:59:09] Data : Service name = MSSQL$DPM
    [08.11.2013 14:59:09] Data : Current status of service = Running
    [08.11.2013 14:59:09] Information : Service is already running
    [08.11.2013 14:59:09] Data : Edition = Standard Edition (64-bit)
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: SqlEval and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = ClientTCPEnabled
    [08.11.2013 14:59:09] Information : Running the check: ClientTCPEnabled
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : ClientTCPEnabled
    [08.11.2013 14:59:09] Information : Calling the method: CheckIfClientTCPEnabled
    [08.11.2013 14:59:09] Information : Check if SQL Server has DPM Server already installed on it.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: ClientTCPEnabled and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = RemoteDbDPMInstalled
    [08.11.2013 14:59:09] Information : Running the check: RemoteDbDPMInstalled
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : RemoteDbDPMInstalled
    [08.11.2013 14:59:09] Information : Calling the method: CheckRemoteDbDPMInstalled
    [08.11.2013 14:59:09] Information : Check if SQL Server has DPM Server already installed on it.
    [08.11.2013 14:59:09] Information : The SQL and DPM machine are same so not checking for DPM installed
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RemoteDbDPMInstalled and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = ReportingSecureConnectionLevel
    [08.11.2013 14:59:09] Information : Running the check: ReportingSecureConnectionLevel
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : ReportingSecureConnectionLevel
    [08.11.2013 14:59:09] Information : Calling the method: CheckReportingSecureConnectionLevel
    [08.11.2013 14:59:09] Information : Check Reporting SecureConnectionLevel.
    [08.11.2013 14:59:09] Information : Getting the reporting secure connection level for SERVERDPM/DPM
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
    [08.11.2013 14:59:09] *** Error : ReportingConfiguration.RemoveReportingConfigurations COnfiguration file path: C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 14:59:09] Information : Setup detected that the Reporting SecureConnectionLevel is 0.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: ReportingSecureConnectionLevel and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = RemoteDbDiskSpace
    [08.11.2013 14:59:09] Information : Running the check: RemoteDbDiskSpace
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : RemoteDbDiskSpace
    [08.11.2013 14:59:09] Information : Calling the method: CheckRemoteDbDiskSpace
    [08.11.2013 14:59:09] Information : Check the disk space for remote database.
    [08.11.2013 14:59:09] Information : Querying WMI Namespace:
    \\SERVERDPM\root\cimv2 for query: select FreeSpace from Win32_LogicalDisk where DeviceID='C:'
    [08.11.2013 14:59:09] Information : Remote DB disk space required : 900 MB disk space available = 191786 MB
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RemoteDbDiskSpace and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = RemoteDbTCP
    [08.11.2013 14:59:09] Information : Running the check: RemoteDbTCP
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : RemoteDbTCP
    [08.11.2013 14:59:09] Information : Calling the method: CheckRemoteDbTCP
    [08.11.2013 14:59:09] Information : Check the Named Pipes protocol for remote database.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RemoteDbTCP and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Data : checkId = RemoteDbMsi
    [08.11.2013 14:59:09] Information : Running the check: RemoteDbMsi
    [08.11.2013 14:59:09] Information : Getting the check for the checkId : RemoteDbMsi
    [08.11.2013 14:59:09] Information : Calling the method: CheckRemoteDbMsi
    [08.11.2013 14:59:09] Information : Check whether the remote DB msi has been installed.
    [08.11.2013 14:59:09] Information : Adding the check result entry for checkId: RemoteDbMsi and result: 0
    [08.11.2013 14:59:09] Information : Got Error Message: Check Succeeded
    [08.11.2013 14:59:09] Data : Result = 0
    [08.11.2013 14:59:09] Information : Getting the string form of report object
    [08.11.2013 14:59:09] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:09] Information : End Inspect.
    [08.11.2013 14:59:09] Information : **************************************************************************************
    [08.11.2013 14:59:10] Information : Instantiating inspect component.
    [08.11.2013 14:59:10] Data : Path of output xml = \PostInstallInspect.xml
    [08.11.2013 14:59:10] Information : Deserializing the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\checks.xml
    [08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\checks.xml
    [08.11.2013 14:59:10] Information : Deserialising the scenario XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\scenarios.xml
    [08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\scenarios.xml
    [08.11.2013 14:59:10] Information : Getting scenarios for the product: DPM
    [08.11.2013 14:59:10] Information : Getting scenarios for DPM
    [08.11.2013 14:59:10] Information : Getting scenario for Mode:Install, DbLocation:Remote, SKU:Retail and CCMode:NotApplicable
    [08.11.2013 14:59:10] Information : Query WMI provider for SQL Server 2008.
    [08.11.2013 14:59:10] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement10 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
    [08.11.2013 14:59:10] Information : SQL Server 2008 R2 SP2 instance DPM is not present on this system.
    [08.11.2013 14:59:10] Information : Query WMI provider for SQL Server 2008.
    [08.11.2013 14:59:10] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ComputerManagement11 for query: Select * from SqlServiceAdvancedProperty where ServiceName='MSSQL$DPM' and PropertyName='Version'
    [08.11.2013 14:59:10] Information : SQL Server 2008 R2 SP2 instance DPM is present on this system.
    [08.11.2013 14:59:10] Information : Inspect context initialized with
    SQL Server namespace:
    \\{0}\root\Microsoft\SqlServer\ComputerManagement11
    Reporting namespace:
    \\{0}\root\Microsoft\SqlServer\ReportServer\RS_{1}\v11\admin
    SqlServerDetected: True
    [08.11.2013 14:59:10] Information : Check if SQL Server 2012 Service Pack 1 Tools is installed.
    [08.11.2013 14:59:10] Information : Inspect.CheckSqlServerTools : MsiQueryProductState returned : INSTALLSTATE_DEFAULT
    [08.11.2013 14:59:10] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:10] Information : Getting the checkResult for the checkId : SqlServer
    [08.11.2013 14:59:10] Information : Getting the checkResult for the checkId : SqlServerReportingServices
    [08.11.2013 14:59:10] Information : Getting the checkResult for the checkId : SqlServerTools
    [08.11.2013 14:59:10] Information : Getting the installables which were not detected
    [08.11.2013 14:59:10] Information : Getting the string form of report object
    [08.11.2013 14:59:10] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
    [08.11.2013 14:59:10] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\InspectReport.xml
    [08.11.2013 14:59:10] Information : Getting the falures while performing checks
    [08.11.2013 14:59:10] Information : Getting the error results
    [08.11.2013 14:59:10] Information : Getting the warning results
    [08.11.2013 14:59:10] Information : Deserialising the Report XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
    [08.11.2013 14:59:10] Information : Loading the check XML from path : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
    [08.11.2013 14:59:10] Information : Getting the falures while performing checks
    [08.11.2013 14:59:10] Information : Getting the error results
    [08.11.2013 14:59:10] Information : Getting the warning results
    [08.11.2013 14:59:10] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
    [08.11.2013 14:59:10] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
    [08.11.2013 14:59:10] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 14:59:12] Information : <<< Dialog >>> Inspect Page : Leaving
    [08.11.2013 14:59:12] Information : <<< Dialog >>> User Information Page : Entering
    [08.11.2013 14:59:26] Information : <<< Dialog >>> User Information Page : Leaving
    [08.11.2013 14:59:26] Information : <<< Dialog >>> Install location Page : Entered
    [08.11.2013 14:59:26] Information : Check if the media is removable
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:26] Data : Drive Name = C:\
    [08.11.2013 14:59:26] Data : Drive Type = 3
    [08.11.2013 14:59:26] Information : Check attributes of the directory
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:26] Data : File Attributes = Directory
    [08.11.2013 14:59:26] Information : Query free disk space
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:26] Data : Free Space = 191786
    [08.11.2013 14:59:26] Information : Query free disk space
    [08.11.2013 14:59:26] Data : Folder Path = C:\Windows\system32
    [08.11.2013 14:59:26] Data : Free Space = 191786
    [08.11.2013 14:59:26] Information : Check if the media is removable
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:26] Data : Drive Name = C:\
    [08.11.2013 14:59:26] Data : Drive Type = 3
    [08.11.2013 14:59:26] Information : Check attributes of the directory
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:26] Data : File Attributes = Directory
    [08.11.2013 14:59:26] Information : Query free disk space
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:26] Data : Free Space = 191786
    [08.11.2013 14:59:26] Information : Query free disk space
    [08.11.2013 14:59:26] Data : Folder Path = C:\Windows\system32
    [08.11.2013 14:59:26] Data : Free Space = 191786
    [08.11.2013 14:59:26] Information : Check if the media is removable
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:59:26] Data : Drive Name = C:\
    [08.11.2013 14:59:26] Data : Drive Type = 3
    [08.11.2013 14:59:26] Information : Check attributes of the directory
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:59:26] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:59:26] Information : Query free disk space
    [08.11.2013 14:59:26] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:59:26] Data : Free Space = 191786
    [08.11.2013 14:59:26] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
    [08.11.2013 14:59:45] Information : Check if the media is removable
    [08.11.2013 14:59:45] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:45] Data : Drive Name = C:\
    [08.11.2013 14:59:45] Data : Drive Type = 3
    [08.11.2013 14:59:45] Information : Check attributes of the directory
    [08.11.2013 14:59:45] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:45] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center
    2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:59:45] Information : Query free disk space
    [08.11.2013 14:59:45] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:45] Data : Free Space = 191786
    [08.11.2013 14:59:45] Information : Query free disk space
    [08.11.2013 14:59:45] Data : Folder Path = C:\Windows\system32
    [08.11.2013 14:59:45] Data : Free Space = 191786
    [08.11.2013 14:59:52] Information : Check if the media is removable
    [08.11.2013 14:59:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:52] Data : Drive Name = C:\
    [08.11.2013 14:59:52] Data : Drive Type = 3
    [08.11.2013 14:59:52] Information : Check attributes of the directory
    [08.11.2013 14:59:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:52] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center
    2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:59:52] Information : Query free disk space
    [08.11.2013 14:59:52] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:52] Data : Free Space = 191786
    [08.11.2013 14:59:52] Information : Query free disk space
    [08.11.2013 14:59:52] Data : Folder Path = C:\Windows\system32
    [08.11.2013 14:59:52] Data : Free Space = 191786
    [08.11.2013 14:59:56] Information : Check if the media is removable
    [08.11.2013 14:59:56] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:56] Data : Drive Name = C:\
    [08.11.2013 14:59:56] Data : Drive Type = 3
    [08.11.2013 14:59:56] Information : Check attributes of the directory
    [08.11.2013 14:59:56] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:56] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center
    2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:59:56] Information : Check if the media is removable
    [08.11.2013 14:59:56] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:59:56] Data : Drive Name = C:\
    [08.11.2013 14:59:56] Data : Drive Type = 3
    [08.11.2013 14:59:56] Information : Check attributes of the directory
    [08.11.2013 14:59:56] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:59:56] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 14:59:56] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
    [08.11.2013 14:59:56] * Exception :  => The path C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM exceeds 64 characters.Choose a path with a shorter length.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException:
    Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException' was thrown.
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.ValidateErrors(String binaryInstallLocation, String databaseLocation, String rosettaInstallLocation, String sqlInstance, Boolean isDatabaseDetected, Boolean installingSql,
    UInt64 requiredDataDiskSpace)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationPage.CheckInstallAndDatabaseLocation()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationPage.OnLeavePage(LeavePageEventArgs e)
    *** Mojito error was: PathTooLong; 0; None
    [08.11.2013 14:59:59] Data : Location of program files = C:\Program Files\Microsoft System Center 2012 R2\DataProtectionManager\Microsoft System Center 2012 R2\DPM
    [08.11.2013 14:59:59] Data : Location of database files = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 14:59:59] Information : <<< Dialog >>> Install location Page : Leaving
    [08.11.2013 15:00:11] Information : Check if the media is removable
    [08.11.2013 15:00:11] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:11] Data : Drive Name = C:\
    [08.11.2013 15:00:11] Data : Drive Type = 3
    [08.11.2013 15:00:11] Information : Check attributes of the directory
    [08.11.2013 15:00:11] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:11] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 15:00:11] Information : Query free disk space
    [08.11.2013 15:00:11] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:11] Data : Free Space = 191786
    [08.11.2013 15:00:11] Information : Query free disk space
    [08.11.2013 15:00:11] Data : Folder Path = C:\Windows\system32
    [08.11.2013 15:00:11] Data : Free Space = 191786
    [08.11.2013 15:00:12] Information : Check if the media is removable
    [08.11.2013 15:00:12] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:12] Data : Drive Name = C:\
    [08.11.2013 15:00:12] Data : Drive Type = 3
    [08.11.2013 15:00:12] Information : Check attributes of the directory
    [08.11.2013 15:00:12] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:12] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 15:00:12] Information : Check if the media is removable
    [08.11.2013 15:00:12] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:12] Data : Drive Name = C:\
    [08.11.2013 15:00:12] Data : Drive Type = 3
    [08.11.2013 15:00:12] Information : Check attributes of the directory
    [08.11.2013 15:00:12] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:12] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 15:00:12] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
    [08.11.2013 15:00:12] * Exception :  => The path C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM exceeds 64 characters.Choose a path with a shorter length.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException:
    Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException' was thrown.
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.ValidateErrors(String binaryInstallLocation, String databaseLocation, String rosettaInstallLocation, String sqlInstance, Boolean isDatabaseDetected, Boolean installingSql,
    UInt64 requiredDataDiskSpace)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationPage.CheckInstallAndDatabaseLocation()
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationPage.OnLeavePage(LeavePageEventArgs e)
    *** Mojito error was: PathTooLong; 0; None
    [08.11.2013 15:00:22] Data : Location of program files = C:\Program Files\Microsoft System Center 2012 R2\DPMx\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:22] Data : Location of database files = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:22] Information : <<< Dialog >>> Install location Page : Leaving
    [08.11.2013 15:00:31] Information : Check if the media is removable
    [08.11.2013 15:00:31] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:31] Data : Drive Name = C:\
    [08.11.2013 15:00:31] Data : Drive Type = 3
    [08.11.2013 15:00:31] Information : Check attributes of the directory
    [08.11.2013 15:00:31] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:31] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 15:00:31] Information : Query free disk space
    [08.11.2013 15:00:31] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:31] Data : Free Space = 191786
    [08.11.2013 15:00:31] Information : Query free disk space
    [08.11.2013 15:00:31] Data : Folder Path = C:\Windows\system32
    [08.11.2013 15:00:31] Data : Free Space = 191786
    [08.11.2013 15:00:33] Information : Check if the media is removable
    [08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:33] Data : Drive Name = C:\
    [08.11.2013 15:00:33] Data : Drive Type = 3
    [08.11.2013 15:00:33] Information : Check attributes of the directory
    [08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:33] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 15:00:33] Information : Check if the media is removable
    [08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:33] Data : Drive Name = C:\
    [08.11.2013 15:00:33] Data : Drive Type = 3
    [08.11.2013 15:00:33] Information : Check attributes of the directory
    [08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:33] * Exception : Ignoring the following exception intentionally => System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB'.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.File.GetAttributes(String path)
       at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.InstallLocationValidation.CheckForDirectoryAttributes(String path)
    [08.11.2013 15:00:33] Information : Caught Exception DatabaseInfoRegKey RegKey shouldn't be null, set DPM DB name to default value
    [08.11.2013 15:00:33] Information : Check the filesystem on which DPM and prerequisites are installed
    [08.11.2013 15:00:33] Information : C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:33] Information : C:\Windows\system32
    [08.11.2013 15:00:33] Information : Query free disk space
    [08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:33] Data : Free Space = 191786
    [08.11.2013 15:00:33] Information : Query free disk space
    [08.11.2013 15:00:33] Data : Folder Path = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:33] Data : Free Space = 191786
    [08.11.2013 15:00:33] Information : Query free disk space
    [08.11.2013 15:00:33] Data : Folder Path = C:\Windows\system32
    [08.11.2013 15:00:33] Data : Free Space = 191786
    [08.11.2013 15:00:33] Data : Location of program files = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:33] Data : Location of database files = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:33] Information : <<< Dialog >>> Install location Page : Leaving
    [08.11.2013 15:00:38] Information : <<< Dialog >>> Commit Page : Entering
    [08.11.2013 15:00:38] Data : An instance of SQL Server to be used to create database = DPM
    [08.11.2013 15:00:38] Data : Target directory for installation = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:38] Data : Physical location of database = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:39] Information : <<< Dialog >>> Commit Page : Leaving
    [08.11.2013 15:00:39] Information : **************************************************************************************
    [08.11.2013 15:00:39] Information : Log setup inputs =>
    [08.11.2013 15:00:39] Data : ProgramFiles = C:\Program Files\DPM2012R2\Microsoft System Center 2012 R2\DPM
    [08.11.2013 15:00:39] Data : UIProgramFiles = C:\Program Files\Microsoft Data Protection Manager
    [08.11.2013 15:00:39] Data : DatabaseFiles = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\DPMDB
    [08.11.2013 15:00:39] Data : IntegratedInstallSource = C:\_SOURCE\_SC2012R2\SCDPM\
    [08.11.2013 15:00:39] Data : SqmOptIn = 2
    [08.11.2013 15:00:39] Information : **************************************************************************************
    [08.11.2013 15:00:39] Information : <<< Dialog >>> Progress Page : Entering
    [08.11.2013 15:00:39] Information : Function >> MsiSetInternalUI
    [08.11.2013 15:00:39] Information : MsiSetInternalUI returned INSTALLUILEVEL_DEFAULT
    [08.11.2013 15:00:39] Information : Function >> MsiSetExternalUI
    [08.11.2013 15:00:39] Data : Path of main msi = C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\msi\msdpm.msi
    [08.11.2013 15:00:39] Data : Path of log file = C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\DpmSetup.log
    [08.11.2013 15:00:39] Information : Getting the string form of report object
    [08.11.2013 15:00:39] Information : Writing the xml string into the file : C:\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs\\PostInstallInspect.xml
    [08.11.2013 15:00:39] Information : Getting the reporting secure connection level for SERVERDPM/DPM
    [08.11.2013 15:00:39] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
    [08.11.2013 15:00:39] *** Error : ReportingConfiguration.RemoveReportingConfigurations COnfiguration file path: C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 15:00:39] Information : Present Secure Connection Level:0
    [08.11.2013 15:00:39] Information : Query WMI provider for path of configuration file for SQL Server 2008 Reporting Services.
    [08.11.2013 15:00:39] Information : Querying WMI Namespace:
    \\SERVERDPM\root\Microsoft\SqlServer\ReportServer\RS_DPM\v11\admin for query: SELECT * FROM MSReportServer_ConfigurationSetting WHERE InstanceName='DPM'
    [08.11.2013 15:00:39] Data : Path of configuration file for SQL Server 2008 Reporting Services = C:\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 15:00:39] Information : **************************************************************************************
    [08.11.2013 15:00:39] Information : Deploy reports
    [08.11.2013 15:00:39] Data : Path of configuration file of SQL Server Reporting Services =
    \\SERVERDPM\C$\Program Files\Microsoft SQL Server\MSRS11.DPM\Reporting Services\ReportServer\RSReportServer.config
    [08.11.2013 15:00:39] Information : Starting Service:ReportServer$DPM on machine:SERVERDPM flag restart:True
    [08.11.2013 15:00:54] Information : Starting Service:ReportServer$DPM on machine:SERVERDPM flag restart:True
    [08.11.2013 15:01:09] Data : Source folder for reports (.rdl files) = C:\Users\root\AppData\Local\Temp\1\DPM3553.tmp\DPM2012\setup\DpmReports
    [08.11.2013 15:01:09] *** Error : CurrentDomain_UnhandledException
    The OS self is patched on the latest updates, SQL too...
    Can anyone give me a hint, this drives me crazy :(
    Thank you for any help
    Volkan

Maybe you are looking for

  • Deleting event in iCal 5.0.1 not syncing with Google Calendar

    When I delete an event from iCal, it does not sync with Google Calendar.  However, when I create an event in iCal, it syncs just fine with Google Calendar. Creating and deleting events from Google Calendar syncs fine with iCal.  Has anyone else exper

  • Using keypad on wireless keyboard to enter passwords won't work in safari

    I have an iMac and I am using an apple wireless keyboard. Whenever I try and type in a password that has numbers in it and I use the keypad, the password is not recognized. I do not have the mouse function turned on. The keypad works fine in all othe

  • Email disappeared after opening and reading

    Opened an email, read it, selected "return" (bottom left) and email was no longer on the Hub or in the Gmail acct. (on the Z10).  For sure I did NOT delete it.  As mentioned, this message was sent to me via Gmail.  My email normally works fine, no pr

  • The requested resource /MobileOTA14/ is not available

    Hi, I am trying to deploy the mobile 4.0 client package MobileOTA14.war file on tomcat6/Windows. I have used the following command to deploy the file. The command executes successfully. The I have restarted the web server. wdeploy.bat tomcat6 -Dwar_d

  • Any way to get hotmail in the menubar?

    I have both gmail accounts and hotmail account (also a yahoo account) for email. I already use a menu item to check gmail, is there anything that can do the same thing for hotmail?