Install code

Where do I find the installation code for a downloaded version of Aperture 3.2? I have a desktop and a laptop and need to install it on both computers.

If you downloaded the paid version of it from the Mac App Store, redownload it on the other computer using the same Apple ID.
If you downloaded the trial version of it, you can't unless noted below.
If you got it shipped to you or got a retail key emailed to you after setting up the trial on one computer, redownload the trial to the other and use the retail key.
(61122)

Similar Messages

  • Where can I find the install code from when I purchased Mountain Lion?

    Going to get a new hard drive, my local store said if I could provide the install code for Mountain Lion that they would only charge me $20 to install the OS on the HD.  How can I find the install code when I purchased it.  I bought it Nov. 2012. 

    That's only applicable if you got Mountain Lion through the now-discontinued free upgrade program and haven't redeemed the code for it.
    If you bought it from the Mac App Store or have redeemed a download code for it, log into it with the Apple ID and password associated with that copy of it, click on the Purchases tab, and redownload it from there.
    If you got it with a new Mac, start it up with the Command and R keys held down and reload it from the recovery partition.
    (80260)

  • I use a Macbook Air. I should have selected ''remind me later'' but accepted the terms and conditions. Now I can't activate my Creative Cloud Student package. Could Adobe re-activate my Install code? It says i already used it.

    I use a Macbook Air. I should have selected ''remind me later'' but accepted the terms and conditions. Now I can't activate my Creative Cloud Student package. Could Adobe re-activate my Install code? It says i already used it.

    Linemijnv19982937 I am sorry that you are facing problems activating your membership.  Do you receive any specific error messages?  For information regarding the activation process please see Activation & deactivation help - http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

  • I have paid my subscription for Adobe Acrobat Pro but can not install it- I always get an error message -also I did not receive any instalation code...

    I have paid my subscription for Adobe Acrobat Pro but can not install it… I always get an error message …also I did not receive any instalation code...

    With the subscription you sign in with your Adobe ID that you used to order the subscription. By installation code, I assume you mean serial number. You do not get one with the subscription, but use your Adobe ID.

  • Any way other than CM to install code on 7941 Phone?

    Is there any other way besides access to a call manager to install code on a 7941 IP phone after a factory reset? (Tech support had me do this - I KNEW I shouldn't have done this) :(
    I am in a remote location and can't reach the call manager even though my ASA shows it is responding in the logs. It just sits there and says "Registering"

    Yes but it is a lot of work. You essentially have to create a TFTP server, properly configure the XML files the phone looks for and unzip the correct version of firmware from CCO. It's usually not worth it for a single phone.
    Also, if the phone is getting to a "registering" state, it sounds to me like it already got its firmware but the SIP/SCCP signaling is not working.

  • Ipod 5th Generation 80 GB / Device Manager / Driver not Installed / Code 28

    Well, where do I begin! Got my 1st Ipod 2 days ago & still unable to use it! I have installed & uninstalled the itunes 7 software numerous times. On phone w/ Apple for 1 hour...followed by online chat help w/ Dell.
    I've tryed 4 different USB ports on my computer. The device Manager shows the Ipod w/ a ? and a ! in yellow. The add new hardware tells me, "Drivers for this device are not installed. Code 28." My computer reconizes that the ipod is plugged in, but will not do anything. There is no communication between the 2. Keeps telling me to insert cd for software for ipod.
    Help! Does seem that other people are having similar issues. I think a software cd should of been provided w/ the ipod....not sure if that would of corrected my problem.

    Hi,
    Click Start > All Programs > Accessories > Run. the Run dialog appears,
    Type %temp%, then click OK.
    locate and enter into the HP Installation temporary folder, start with the 7Z characters.
    If you can see several folders starting with 7Z, locate the latest one.
    Click the Address bar area, then the full address path will appear,
    Copy the full path location by clicking CTRL + P while the path is selected.
    Enter the Device Manager.
    Right click the printer name with the error mark, then click Update Driver.
    Select the second option to manually locate the driver.
    Paste the temporary folder path and click Next (Keep Include Sub Fulders marked), the driver should be updated.
    Please let me know of any change,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I have 3 questions,Audio/Video Remote Control HID driver windows 8 fails to install code 32, trying to use usb tether connection rather then using WiFi to connect Laptop and iPhone. can only connect using wifi. Last quest. about the hotspot bar.

    In device manager it shows an error code 32' using iPhone 5 related to Apple Tv I believe is when this started, I am thinking I can DL the file and install
    biut I am not sure how to properly do this.
    Also I use my LTE to tether (paid) to my LapTop as well, The issue I am having, I cannot get the USB to work as a network connection. However using the WiFi method works fine but I rather use the sync cable at times such as when I am charging the phone and/or wishing to not  trainsmit my ssid for others to see even though I do use a password.
    Last question about using the built in WyFi tether connection, Is it posable to remove or ake the annoying blue indicater bar at the top disappear? This blocks from doing certain tasks that forces me to shut off the HotSpot app. to allow me to pull down the info bar at the top, Please Help Thanks

    In device manager it shows an error code 32' using iPhone 5 related to Apple Tv I believe is when this started, I am thinking I can DL the file and install
    biut I am not sure how to properly do this.
    Also I use my LTE to tether (paid) to my LapTop as well, The issue I am having, I cannot get the USB to work as a network connection. However using the WiFi method works fine but I rather use the sync cable at times such as when I am charging the phone and/or wishing to not  trainsmit my ssid for others to see even though I do use a password.
    Last question about using the built in WyFi tether connection, Is it posable to remove or ake the annoying blue indicater bar at the top disappear? This blocks from doing certain tasks that forces me to shut off the HotSpot app. to allow me to pull down the info bar at the top, Please Help Thanks

  • Install Code Check

    Before beginning I'll have set up the hard drive with a 25gb Windows FAT partition on dev/sda3 and 25 GB free space remaining.
    Creates Linux system with all partitions including /boot in lvm group, and encrypts /home /var and /root
    NOTE: Grub as installed in normal Arch setup will not work. Grub2 will have to be installed later
    modprobe dm-crypt
    modprobe aes-i586
    Boot the live cd, then login and.
    cfdisk /dev/sda
    Create a lvm partition type in free space
    pvcreate /dev/sda4
    create a physical volume
    vgcreate archvol01 /dev/sda4
    lvcreate -L  64MB archvol01 -n lvolboot
    create boot partition
    lvcreate -L 3G archvol01 -n lvolvar
    create var partition
    lvcreate -L 12G archvol01 -n lvolroot
    create root partition
    lvcreate -L 11GB archvol01 lvolhome
    create home partition
    lvcreate -C y -L 4G archvol01 -n lvolswap
    cryptsetup -c aes-xts-plain -y -s 512 luksFormat /dev/archvol01/lvolhome
    encrypts home partition
    cryptsetup -c aes-xts-plain -y -s 512 luksFormat /dev/archvol01/lvolroot
    encrypts root partition
    cryptsetup -c aes-xts-plain -y -s 512 luksFormat /dev/archvol01/lvolvar
    encrypts var partition
    cryptsetup luksOpen /dev/archvol01/lvolhome
    opens lvolhome
    cryptsetup luksOpen /dev/archvol01/lvolroot
    open lvolroot
    cryptsetup luksOpen /dev/archvol01/lvolvar
    opens lvolvar
    start arch installer
    set timezone etc,
    skip partition/autoprepare hard disk, go straight to select filesystem mountpoints
    You need to answer the question Do you need support for booting from encrypted volumes? with yes.
    /etc/mkinitcpio.conf
    Alter this line:
    HOOKS="base udev autodetect pata scsi sata filesystems"
    to this:
    HOOKS="base udev autodetect pata scsi sata encrypt lvm2 filesystems"
    Edit /etc/rc.conf from USELVM="no" to USELVM="yes"
    Is it more secure to use aes-xts-plain or  aes-lrw-benb or  aes-cbc-essiv:sha256?
    Anyone  see a problem with the code besides having /boot in a lvm group?
    Thanks for comments
    Sources:
    Arch Wiki
    http://wiki.archlinux.org/index.php/Sys … r_dm-crypt
    Circle of Friends Blog
    http://www.pindarsign.de/webblog/?p=767
    Last edited by duke11235 (2009-10-18 22:05:54)

    The ability to detect the jre at the update level, as well as the ability to install a specific version are only present if the DT plugins are installed.
    These plugins only exist for windows and are only part of the 6u10 (1.6.0_10) versions of java.
    The javascript you show uses an undefined minimumVersion variable.
    also note, you cannot use the wildcard '1.5.0*' in the call to isWebStartInstalled (which takes minimumVersion arg)
    if fixed, this code would still not work as you want, since clients with 1.6.0 or later would sail straight thru and launch.
    I suggest replacing isWebStartInstalled() with deployJava.versionCheck('1.5.0*') .
    then on systems with the plugin installed, if no 1.5.0* version is installed, the latest 1.5.0_XX will be installed before launching the app.
    (assuming the app has also <j2se version=1.5/> or equiv.)
    on systems w/o plugins installed, the latest version of java will be installed, and it will be up to javaws auto download to get 1.5.0* version.
    this could still have problems, especially on platforms not supporting the plugins (non-windows) , since code keeps checking for '1.5.0*', and installing only latest, so you would want to wrap install with something to prevent repeated attempts to install:
    if (deployJava.versionCheck('1.6.0+') && !deployJava.isPluginInstalled()) {
    ---- don't do any install here - ---
    /Andy

  • No audio output device is installed(code 10 error), in compaq presario v6000

    Hi,
    I have compaq presario v6608AU laptop with vista OS installed
    I got a small red cross mark near the sound icon in the taskbar.
    I read the forum and tried all possible ways to get back the sound but nothing worked.
    when i switched on the bluetooth, it shows audio connected to bluetooth but no audio in laptop
    In device manager i was not able to find any drivers for laptop audio but wireless audio is installed.
    I tried downloading audio driver for my notebook but it doesnt get installed, saying no audio device found code 10 error
    It would be a great help if some  one would help me.
    Thanks,

    Hi,
    Please follow the following link
      http://support.microsoft.com/kb/2011656
    Regards,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Apple mobile device USB Driver won't install (Code 37) on my 7th Generation iPod Nano

    As a result, iTunes won't detect my iPod. But the iPod will charge when I plug it in to my comp, and there is an iPod folder in "My Computer". But after installing iTunes, it no longer says “connected” on the iPod (even though it still charges it). And, in Device manager, there is a yellow exclamation mark that appears in the DVD/CD-ROM drive directly after installing iTunes – there is also a yellow mark next to “Apple mobile device USB Driver” when my iPod is plugged in. For both, it says “Code 37.” I know how to fix the DVD/CD-ROM drive problem (by deleting the filters) but the Apple driver still won't install after that. I've tried troubling shooting this. I uninstalled and reinstalled the drivers, but it hasn't made a difference. And I've uninstalled and reinstalled iTunes multiple times, too, and every time I reinstall iTunes the same thing happens: my iPod no longer says “connected on the screen,” and the  DVD/CD-ROM drive gets code 37 again. Also, I tried different USB cables/ports.
    Any help of suggestions would be greatly appreciated. And I think I've already read a lot of troubleshooting guides on this site, but haven't had any success so far.

    Sorry, I'm confused. What do you mean by “leaving all other USB devices disconnected”? Does that include my mouse, keyboard, etc? And does that mean I uninstall those things in the device manager?

  • Problems installing code after flash upgrade

    I just upgraded a 2600 router from 8 MB flash to 16 MB flash (that came from a working 3600). I know for a fact that the firmware for the router with the upgrade is good - I was able to upgrade a different router with no problem. However, with the new flash, the transfer of the code errors out with
    File reception completed.
    TFTP copy: operation terminated due to bad checksum comparison.
    As best as I can tell, the flash is the same between the 2600 and 3600. Please let me know if anyone was able to successfuly do this. Thank you.

    I tftp'd the image for the 2600 into the flash when it was installed in the 3600, stuck the flash into the 2600, and it boots.

  • NSUserDefaults stopped working after installing code sign certificates (?)

    The following code has worked fine in the iPhone simulator.
    NSUserDefaults *userDefaults = [NSUserDefaults standardUserDefaults];
    myFloat = [userDefaults floatForKey:@"myFloat"];
    myString = [userDefaults stringForKey:@"myString"];
    Today I installed the code signing certificates and all the updates necessary to deploy my code to a device. That part works fine, and I'm able to install and run my apps on the iPhone device.
    The problem is that the above code has stopped working. myFloat is now always 0.0 and myString is now always nil. If I go into the Settings app, my preferences UI is still there and I can change and persist the preference values. But my app no longer sees those values.
    I'm assuming this broke because of the changes related to code signing and device deployment, but I'm not sure since there is no way (?) to roll back those changes.
    Has anyone else encountered this problem?
    Thanks,
    Nick

    I have the same issue with SDK Beta 7, I can't get my preferences to persist (although in my case I'm not using the Settings app to alter settings). This is what I am doing:
    +(void) initialize
    NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults];
    NSDictionary *appDefaults = [NSDictionary dictionaryWithObject:@"YES" forKey:@"SomeValue"];
    [defaults registerDefaults:appDefaults];
    in initwithFrame:
    if ([[NSUserDefaults standardUserDefaults] boolForKey:@"SomeValue"]) {
    [[NSUserDefaults standardUserDefaults] setObject:@"NO" forKey:@"SomeValue"];
    } else {
    [[NSUserDefaults standardUserDefaults] setObject:@"YES" forKey:@"SomeValue"];
    and I synchronize in applicationWillTerminate. Settings just don't persist.

  • InDesign CC failing to install (Code U44M1I210)

    I have been trying to update InDesign on my late 2012 rMBP since Tuesday. (It installed just fine on my late 2011 iMac) Each time I attempt, the update immediately displays being 50% complete, then fails.
    Some things I've done to resolve the issue:
    + Quit/Restarted Creative Cloud Desktop
    + Rebooted my computer
    + Uninstalled then reinstalled CC Desktop
    + Checked the Adobe logs (couldn't locate an updated InDesign log)
    Tried posting in another forum, but no one seemed to know what to do except what I've already done above. Nothing seems to be working!

    I was getting the same error code with PP and AE. As of 5 minutes ago, the problem is fixed. I wrote up my approach in the comments here:
    http://forums.adobe.com/message/6255678

  • Can't See NTFS drive no matter what i do / install / code

    I've read and read and read and read and read.  then installed, uninstalled, deleted, coded... no matter what i do i CAN"T get my mac to see my external NTFS drive for the life of me.
    i'm about to distroy the stupid pc a friend gave me but fist i need to get the 1T of movies/music/tv shoes off the HD.
    PLEASE HELP PLEASE PLEASE PLEASE!!!!!!
    thanks
    jIM
    mountain lion (latest update)
    mid 2010 MBP 8 gigs ram

    Can anyone help me??  No matter what i do my MBP won't bring up the drives.. doesn't see them, no error messages nothing...  they seem to work fine on the windows box but not matter what i install / uninstall the mac just won't see them.... anyone???

  • Security Update (KB954430) repeatedly fails to install (Code 64C)

    Things I have tried:
    - hotfix tool
    - disabling virus protection
    - downloading and manually installing the update (Error: the feature you are trying to use is on a network resource that is unavailable.)
    - downloading and running this update: Windows6.1-KB947821-v34-x64.msu
    - update from Windows Install DVD (I think this is called an in-place install)
    I fear I will have to format and reinstall Windows and all my programs. Is there anything else I can try? Is it terribly risky to simply continue working without this update?

    Method 1:
    Follow the instructions in the link below to rename Software distribution and catroot folders and try to install the service pack.
    You cannot install some updates or programs
    http://support.microsoft.com/kb/822798
    Method 2:
    Follow the instructions in the link below to reset Windows update components.
    How do I reset Windows Update components?
    http://support.microsoft.com/kb/971058
    Method 3:
    Perform System File Checker (SFC) scan which will help you in resolving the issue.
    To determine whether the issue that you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool scans system files and replaces
    incorrect versions of the system files by using the correct versions.
    Follow the instructions in the link below to run SFC scan.
    http://support.microsoft.com/kb/936212/
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

Maybe you are looking for