Install Config. Help
Hi,
I want to install Oracle Server 8i on a machine with
512MB RAM, Dual Pentium II processor, 22GB SCSI HDD.
I want to have NT and LINUX and learn installing oracle 8i on NT
and Linux.
Under NT,I want to install Oracle web application server, with
ORacle Lite, D2k, Designer 2000.
If any one, could suggest me for partition and procedures to
follow, It would be helpful to me.
thanks in advance.
Anand
null
Senthil,
I assume that you have just one hard drive. Create two partitions of say 11 Gb each. It should be adequate for the software you are planning to install under both the environments.
Install NT first on the first partition. If you are using NT 4, it may have problems recognizing partitions of more than 4 Gb until Service Pack 3 or higher is installed. Leave the other partition unformatted until you install linux.
Install Linux on the second partition, during which you can create the other partitions required by linux like swap, boot, root, apps, etc. Choose to boot from a boot disk. Once you are more familiar with the enviroment you could edit the NT bootloader to boot into Linux also.
Regards
Peri
Similar Messages
-
Lenovo Yoga 2 13, Kali Linux 1.0.7, Ubuntu 14.04, Windows 8.1 install, config, and wifi fix.
Lenovo Yoga 2 13, Kali Linux 1.0.7, Ubuntu 14.04, Windows 8.1 install, config, and wifi fix.
I wanted to share an experience with everyone I hope will help others avoid what I have gone through the past 3 days. I bought a Yoga 11s that I loved but had some issues with the wireless, Lenovo being awesome replaced it with a Yoga 2 13. I love this laptop but ran into some issues with Linux install/wireless, which I wanted to show how to resolve in one place. Hopefully this will help someone else get through this quicker
I am going to try and write this for someone with little Linux experience, if I miss the mark please let me know and I will clarify the best I can.
For work I need Windows 8.1 and Kali Linux, while for home I prefer Ubuntu.
My Yoga 2 13:
I5 1.6 ghz
8 GB ram
256 GB SSD
ORANGE!
My requirements:
I need Windows
I need Kali Linux (livecd, even with persistent mode was not an option as it would not save the wireless fix or system updates) – I would also like this on a USB drive and not the internal SSD
I would like Ubuntu
Needed to do this:
1. 2 USB thumb drives (at least 8gb in size each) I used 2 Leef Supra 32GB drives. They are my favorite right now and are only about $27 at amazon.
2. Phone that can USB Tether or a USB Ethernet card (External USB wireless will show as "Hardware Locked"). Again you can pick one up for sub $10 if you need the USB Ethernet route. I used my Galaxy S5, you will need to download 200-300 mb of items through this so make sure you have the data if you go that route.
3. You may be able to get a USB wifi card to work if you do the following after boot. This only worked once for me.
a.Type ‘sudo rmmod iwlmvm’
b.Type ‘sudo rmmod iwlwifi’
4. ISOs of Ubuntu and Kali Linux (I used Ubuntu 14.04 and Kali Linux 1.0.7)
5. Software to unzip the ISOs. I recommend 7-ZIP and will be referencing this in this guide.
6. I will include the EFI boot files and the WiFi fix files if I can attach. Otherwise I will provide a link to them.
Link: https://www.dropbox.com/s/puxnnoft3gn2b6l/WiFiFix.zip
Recommended (these are just in case you corrupt something making your system not see any OS
1. I would call Lenovo beforehand and get a set of recover disks (this will take 2-3 days)
2. In the meantime a USB Windows 8.1 or 8 ISO (the repair feature may save you)
*Note: At many points in this guide I detail steps and commands. Please double check that you understand the step before proceeding. There are multiple points where a mistyped command or clicking the wrong option will cause your entire system to fail and you will need to reformat the entire drive and start over. This also will make One Touch recovery not work. Proceed with caution.*
I did not need to disable ‘secure boot’ to do this, but keep in mind that you may need to.
Steps:
First let’s go through the installs, and then we will go through grub config and wireless fix
1. In Windows scroll to computer and right click, select manage.
2. Go to “Disk Management”
3. Select the main HDD (notice Lenovo puts a stupid number of partitions on here)
a. I deleted the D: drive on here, if you do this make sure to copy the drives over to your main C: drive. You will want to run each of the installers and repair the drivers after.
4. I used the space from the D: drive and pulled a little more creating a 50 GB partition for Ubuntu and my swap file
a. You can also add more space by right clicking your C drive and selecting shrink
b. Do not format the partitioned data as this will make identifying it later much easier.
5. Open a command line
a. Swipe from the right of the screen and select search
b. Type ‘cmd’
c. right click and select ‘run as admin’
6. For Ubuntu: Type ‘diskpart’ into the command line
a. type ‘list disk’
i. You should see 2-3 disks depending on if you have one or both usb drives in the laptop at the time. I would suggest only doing 1 at a time so you don’t lose track.
b. type ‘select disk $’ (Replace the $ with the number of the drive)
c. ***** Before proceeding make sure you have the correct drive selected or you can ruin your Windows install and Lenovo one touch recovery will not fix it since we have changed the partitions *****
d. type ‘clean’
e. type ‘create partition primary’
f. type ‘active’
g. type ‘format fs=fat32 quick’
h. type ‘assign’
i. type ‘exit’
6. For Kali Linux: Type ‘diskpart’ into the command line
a. type ‘list disk’
i. You should see 2-3 disks depending on if you have one or both usb drives in the laptop at the time. I would suggest only doing 1 at a time so you don’t lose track.
b. type ‘select disk $’ (Replace the $ with the number of the drive)
c. ***** Before proceeding make sure you have the correct drive selected or you can ruin your Windows install and Lenovo one touch recovery will not fix it since we have changed the partitions *****
d. type ‘clean’
e. type ‘create partition primary size= 3272
f. type ‘active’
g. type ‘format fs=fat32 quick’
h. type ‘assign’
i. type ‘exit’
j. By doing this we can maintain a portion of this drive as the install CD and still have linux install/ liveCD if we need to run it on another machine.
7. At this point the drive is ready to have the contents of the ISO copied over.
8. Right click the ISO and select 7-zip then ‘zip to /’ This should unzip the ISO to the location of the ISO into a folder named exactly the same as the ISO.
9. Once this is done for Ubuntu ISO it is done
10. Kali requires a little bit more to be ready
a. Kali will need some files added for EFI boot. --$--
i. Thanks to: https://forums.kali.org/showthread.php?271-How-to-EFI-install-Kali-Linux
ii. EFI files are located within the wifi fix folder https://www.dropbox.com/s/puxnnoft3gn2b6l/WiFiFix.zip
11. Now let’s start with Ubuntu
Ubuntu install
1. Place USB drive into the laptop and press the “Lenovo boot” button next to the power button
2. Select ‘Boot Menu’
3. Select ‘EFI USB Device (Name of drive)’ Mine stated Leef Supra
4. Select ‘install Ubuntu’
5. Go through the Ubuntu install until you get to select the install drive
6. Once you get to the install portion it will ask you to select from one of 4 options. Select ‘Manually select partition’
7. Select the “Free Space” where we opened up some of the drive
8. You will need to create 2 partitions, I usually create the swap partition at the end of the drive
a. First I create the swap
i. Set at the end of the drive
ii. Set size to 1024 mb
iii. Set type to ‘swap’
b. Second create the ext 4 partition
i. Set to beginning of drive
ii. Set to remainder of the space
iii. Set type to ext4
iv. Set mount point to /
9. Finish the install and boot into Ubuntu
10. You will notice that your wireless is ‘disabled by hardware’ This is fine for the time being and we will worry about this after the kali install. If we fix it now for some reason after installing kali we get the error again and would just need to fix it again.
Kali Linux install
1. Place USB drive into the laptop and press the “Lenovo boot” button next to the power button
2. Select ‘Boot Menu’
3. Select ‘EFI USB Device (Name of drive)’ Mine stated Leef Supra
4. From the grub menu select ‘install kali linux’ both graphical and text work. I much prefer text install
5. You will get a few errors through the install but that is fine
6. The first we see is about network hardware and ‘load missing firmware from removable media?’ – Select ‘no’
7. Then select no ethernet card
8. It will have you name your machine then it will ask you for the root password
a. If you want to just use root *not recommended* place the password here
b. If you wish to use a non-root account then leave these blank and it will ask you for a name, username, and password of the new machine *Very Recommended* - this will also add this user to the sudoers file
9. It will then ask you to ‘partition disks’
10. Select manual
11. Now here is where it can get a little confusing so read twice click once
12. Select the USB drive from this list
13. Mine shows up under (sdb) – Leef Supra
a. It could be sdc, sdd, sde, etc… depending on how many drives you have plugged in.
14. You should see one primary drive that is 3gb or so that is formatted as FAT32. – DO NOT TOUCH THIS PARTITION!
15. You should see the remainder of this drive as ‘FREE SPACE’ select that
16. Create a partition at the end at size 1024mb and swap
17. Then create another one for the remainder of the drive and set it to ext4 with mountpoint of /
18. Continue through the install after you should see an error warning you that ‘you may not be able to boot’ that is fine, select continue
19. Then select from the menu of all the options ‘continue without bootloader’
20. It should finish up then reboot on its own.First setup/boot/fix grub
1. You should be able to boot up into GRUB2 menu now.
2. You may not see kali linux in this menu (make sure you have your towel and don’t panic!)
3. Boot into Ubuntu
4. Once you log in you should see that you still cannot use wireless due to being locked by hardware
5. This is expected
6. Let’s fix grub then we will come back to fixing wireless
7. Plug in your device to connect to the internet (USB Tethering or USB Ethernet)
8. Once you verify that you now have an internet connection run the following from terminal
a. ‘sudo add-apt-repository ppa:danielrichter2007/grub-customizer’
b. ‘sudo apt-get update’
c. ‘sudo apt-get install grub-customizer’
9. You can also edit the grub.cfg manually if you know what you are doing… I did not
10. Open grub customizer
11. It should auto populate and you should see ‘debian (kali linux)’ somewhere in the list
12. It should be mounted to /dev/sdb2 or /dev/sdc2 depending on how many devices you have
13. At this point go ahead and save
14. Reboot and test that you can get into each OS
15. This is where my inexperience got me. I spent 2 of my days so I am including this error: If when you boot into Kali you get an error somewhere that says ‘/bin/sh: can’t access tty: job control turned off’ look above it for an error that looks similar to ‘ALERT! /dev/sdc2 does not exist. Dropping to a shell!!’
a. That error is due to the mount point being incorrect in grub, reboot and from within grub highlight the kali boot. Press ‘e’ then towards the bottom you should see ‘root=/dev/sdc2’ change this to ‘root=/dev/sdb2’ again the number doesn’t matter just make sure it stays the same.
b. Press F10
c. If this boots fine then you will need to go back and fix the grub.cfg or load into Ubuntu and open grub customizer again, it should fix this
16. Now you have 3 working OS on the machine with one being on a USB! Congrats!
17. You can remove the USB with no worry of screwing up your install, but you will not be able to boot into Kali Linux until you replace it. I would suggest only removing it and replacing it while the machine is powered off, but that’s just me.
Fix Wireless
Now is the time to do what probably ¾ of you came here for. FIX THE DANG WIRELESS. This is a huge problem from Lenovo’s side that I hope they realize how important Linux is and will fix. I won’t hold my breath though.
Log into Ubuntu : This is well documented in the following forum post on page 3 by user Haohe:
http://ubuntuforums.org/showthread.php?t=2215044&page=3
His has you download quite a large file, mine should be much smaller.
https://www.dropbox.com/s/puxnnoft3gn2b6l/WiFiFix.zip
1. Download the attached package with the fix.
2. Connect your USB internet device (tether or ethernet)
3. Place the packages somewhere easy to access, in this example I will place them under ~/Desktop/WiFiFix
4. Type ‘cd ~/Desktop/WiFiFix/’
5. Now we need to prep the tools we need.
6. Type ‘sudo apt-get update’ – we did this before, but you know, just in case
7. Type ‘sudo apt-get install linux-headers-`uname –r`’ Note around uname-r they are the ` symbol not the ‘ this is located just above the tab on the same key as ~.
8. Type ‘make’
9. Type ‘sudo cp /lib/modules/3.13.0-24-generic/kernel/drivers/platform/x86/ideapad-laptop.ko ~/ideapad-laptop.ko.backup’
10. Type ‘sudo cp ~/Desktop/WiFiFix/ideapad-laptop.ko /lib/modules/3.13.0-24-generic/kernel/drivers/platform/x86/’
11. Type ‘sudo modprobe -r ideapad-laptop’
12. Type ‘sudo modprobe ideapad-laptop’
13. Type ‘sudo rfkill unblock all’
14. Type ‘sudo modprobe -r ideapad-laptop’
15. Type ‘sudo mv ~/ideapad-laptop.ko.backup /lib/modules/3.13.0-24-generic/kernel/drivers/platform/x86/ideapad-laptop.ko’
16. Next we need to blacklist the ideapad module
17. Type ‘sudo echo 'blacklist ideapad-laptop' > /etc/modprobe.d/blacklist-ideapad.conf’
a. The first time I tried this it wouldn’t work. So I did the following
b. ‘sudo touch /etc/modprobe.d/blacklist-ideapad.conf’
c. ‘sudo vim /etc/modprobe.d/blacklist-ideapad.conf’
d. Enter blacklist ideapad-laptop
e. Exit and save
18. Reboot your Yoga 2 13
19. Boot into kali and see if you have wireless, if you do then you are done. If not we will need to repeat this process with one small little change.
Kali Wifi Fix
1. Copy the sources.list from the package provided
2. Replace /etc/apt/sources.list with the included
3. Some of the file path changes but the process remains the same from here.
Congratulations you now have 3 OSes one portable to other machines and working wifi!
Thank you
SirGed -
L20-155: Can't install Config Free - "Not Found NDSFiles Folder"
Hallo outthere,
After 2 weeks i install win xp pro on my l20-155, and now i`ll like to install config free (confree-xp-55013-du.zip),
but there comes an message thats tell:
"Not Found NDSFiles Folder", and the install stops!
any help is welcome
thankssofarHi
Sometimes the installations problems occur because of wrong installation order.
If you want install the OS manually, without to use the recovery cd you have to install the Toshiba drivers tools and utilities in the right order. Its very important that you install firstly the chipset driver and then the common modules. After this installation you should install the common drivers like graphic driver, sound driver, etc. -
windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?
Hi Tamekia,
I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
Level-three uninstall, and register the Windows Installer Service
Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
My Macbookpro has turned into microsoft windows and lost all data, how do I recover it with my windows 7 still inside? I accidentally install directly, Help please...
ok turn it off manually and turn it back on while holding the apple logo bottor or the function botton this will give you an option to choose if you want to startup with osx ow windows. let me know if this works
<Email Edited By Host> -
Have recently installed windows 7 32bit operating system and it won't allow me to install iTunes, help??
Let's try the following document with that one:
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application" -
I did not find facetime in iphone5. How to install please help me to install facetime
I did not find facetime in iphone5. How to install please help me to install facetime
What country did you buy the phone in?
What iOS version does it have?
As has been said, Facetime is banned in some coutnries and so is not available on iPhones and cannot be insatlled.
Also, before iOS7, the iPhone had no Facetime icon, it was built into the Contacts App. -
I don't get a photo preview in bridge of my raw files, just the NEF file thing. Then when I click to open them I get a message that says: "If you are attempting to open a raw file from a digital camera, make sure you have the latest Camera Raw update installed via Help > Updates" "If the problem persists, visit the following link for more information: http://www.adobe.com/go/kb407111". I can't seem to figure out what to do! Help Please!?
Usually the problem with a newer Nikon camera is that the NEF files have been transferred or viewed with obsolete Nikon software, like Nikon Transfer for View NX, and those change something in the header of the raw file that makes it unrecognizable to Adobe products.
For new images, the solution is to either stop using Nikon products to transfer and view your files or update your Nikon products to be as new as your camera.
There is a utility to fix this particular corruption here:
Fix Corrupted Nikon NEF Images -
I had itunes installed on my old ACer and went to install itunes on my new HP. It has removed all my music from my phone.and when I tried earlier to update itunes on old acer it wouldn't install properly.
help.While that may work9I do not think it will) with iTunes purchased music it will not work for other music.
- Transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- For other music you will need a third-party program like one of those discussed here.
Copy music -
I upgraded my 3gs to the iOS5 software, but it keeps telling me on my iphone and my itunes that it cannot activate my iphone! Then my iTunes said there is no SIM card installed. HELP! I can't seem to even restore, which is what I was told to do by the Apple Store.
Hi there,
if your phone has ever been replaced by Apple (within or outside of warranty), have Apple check their records to which carrier your iPhone (its IMEI number) is currently locked to.
If it is locked to any other than the carrier you have your SIM-card from, ask the folks at Apple to have your phone's lock adjusted to your carrier. Once that is done, there is a good chance that your phone will work again.
Hope this helps,
Chris -
just updated the lion os x, and now when I try to use my optus dongle, it comes up with the message saying that it won't work because Java Runtime needs to be installed. Help?
Have you run Software Update. You have Java already installed, but it needs to be updated.
-
CS6 Installer halts when installing Adobe Help
CS6 Creative Suite Design & Web Premium Trial downloads, extracts, but the installer halts when it hits "Currently Installing Adobe Help", and the install time keeps increasing indefinitely. I have tried over and over, re-downloading, using the direct download links, running the creative suite cleaner, the Adobe Support tool, restarting my computer, etc. etc. etc. It does this same thing when I have tried to install Dreamweaver CS6 on its own, but I was able to download & install Lightroom 4 with no problems whatsoever. What can I do at this point?
I too am having this problem, and killing InstallAdobeHelp.exe DOES seem to allow the installer to continue. Thank you for that tip, Dan!
For reference (Adobe or otherwise) here is some log and other useful information:
[ 3968] Mon Jul 16 23:43:03 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 0 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{152B1DA7-A342-4EAA-BD28-25DD7B74AB3C}] took 2948.64 milliseconds (2.94864 seconds) DTR = 165.5 KBPS (0.161621 MBPS)
User specified overrideFile:
[ 3968] Mon Jul 16 23:43:05 2012 INFO
Successfully updated the csu inventory for {152B1DA7-A342-4EAA-BD28-25DD7B74AB3C} Suite Shared Configuration CS5.5 2.5.0.0 return values 0:0
Calling the custom action code for post-repair for payload {152B1DA7-A342-4EAA-BD28-25DD7B74AB3C} Suite Shared Configuration CS5.5 2.5.0.0
Calling the custom action code for pre-install for payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0
::START TIMER:: [Payload Operation :{D38116C8-C472-4BB0-AD6F-0C1DD1320D1D}]
[ 7124] Mon Jul 16 23:43:05 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: InstallThirdPartyPayloadOperation
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installing third party payload
Third party application path:C:\Users\<USERNAME_REPLACED>\Desktop\CS6 Master Collection\Adobe CS6\payloads\AdobeHelp\InstallAdobeHelp.exe
CommandLine: appVersion=4.0.244 appId=chc pubId=4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 installerArg1=-silent installerArg2=-eulaAccepted installerArg3=-programMenu installerArg4=AdobeHelp.air
[ 2068] Mon Jul 16 23:53:29 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
-----I CANCEL INSTALL HERE AFTER LONG PERIOD OF TIME---------
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 6.0.98.0
Win OS version: 6.1.1.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
[ 2068] Mon Jul 16 23:53:30 2012 INFO
Supported RIBS version range: [0.0.66.0,6.0.98.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[ 2068] Mon Jul 16 23:53:38 2012 INFO
______ Verify Dependency Subscribers ______
BEGIN Operation order for all session payloads: mediaGroup (requires,satisfies)
etc....
A couple notes:
I am installing CS6 Master Collection trial.
I am running Windows 7 Ultimate x64
I had CS4 & CS5 Master Collection installed (non-trial)
I tried removing both, with no luck.
I updated Download Manager and Adobe Air just previous to installing.
I have tried restarting, installing with and without internet access/activation (shouldn't really matter) - Attempted installation about 6 times.
Running InstallAdobeHelp from command line using the same call the installer does (InstallAdobeHelp.exe CommandLine: appVersion=4.0.244 appId=chc pubId=4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 installerArg1=-silent installerArg2=-eulaAccepted installerArg3=-programMenu installerArg4=AdobeHelp.air) Gives the same result - an empty window appears and never goes away.
Canceling the installer doesn't kill InstallAdobeHelp.exe, it will keep running in the background until killed - even if the installer is forcefully stopped, and will even run 4 or 5 InstallAdobeHelp.exe processes at the same time, if you keep trying to install.
Big idea: I saw something in the log about already having AdobeHelp 1.0.0.0 installed (Probably from CS4/5?) I'm guessing this is causing the conflict:
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,6.0.98.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[ 9132] Tue Jul 17 23:59:43 2012 INFO
______ Verify Dependency Subscribers ______
[ 9132] Tue Jul 17 23:59:43 2012 WARN
DS013: Payload {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it. -
I had my ipod this week, so I do not know which applications to install. please help me
I had my ipod this week, so I do not know which applications to install please help me thank you in advance
You can buy any apps that you want.
-
had a text telling me my old iPhone 3GS has now been unlocked. Inserted Orange SIM (from daughter's working phone) and iTunes says no SIM installed. Help please
Kilted Tim is correct, did you plug it in to iTunes to complete the process? I assumed you would have done so, but I shouldn't have assumed.
-
Upon updating to higher available ios 5, my 3gs iphone got stuck showing cant activate,no SIM installed, any help ?
Sounds like your phone was jailbroken.
-
I can't watch YouTube videos on my brand new MacBook Pro with Lion. It says I need to download Adobe Flash Player but that won't install. Help!
The same thing happens to me, Safari asks me to update the Adobe FlasPlayer, I download, start the installation process, ask me my username and password in order to install, then see a window where I choose if I want to always install the updates , or ask first, or not inslate updates, and at this point it is not progress, I can not cancel the process, I turn off and turn on my machine.
What can I do ..??
Regards.
Maybe you are looking for
-
How to get the name of a method?
How can I get the name of a method, before measure its time of execution?
-
New Quicktime 7.6.6 (1671) won't export WAV files
HELP! - New Quicktime 7.6.6 (1671) won't export WAV files. I just did the automatic upgrade to the new version of Quicktime and now I can't export WAV files from a CAF file. The original .CAF file plays perfectly but when I attempt to export it the e
-
Tips on using Compressor to fit 130mins on 1 DVD...
Hi all, I need to fit 130 mins on one DVD single layer and I don't have much experience with Compressor which I have on an old iMac G4. I would use dual layers but often I can't get DvD players to recognize dual layer verbatims.. This disk will be co
-
Link Load balancing - Data center query
Dear all, I have a query on link load balancing. My scenario goes like this. The customer has taken web hosting services from two data centers. When an user who is accessing the servcies available in primary data center gets disconnected due to say l
-
Why is my iPhone 5 number grayed out in the iMessage?
Why is my iPhone 5 number grayed out in the iMessage?